Skip to content
This repository has been archived by the owner on May 14, 2024. It is now read-only.

Latest commit

 

History

History
 
 

examples

pymavlink Examples

File Description
mavtest.py Demonstrates creating a mavlink message, putting it on a buffer and then decoding from said buffer.
bwtest.py Check bandwidth of link. Display results on terminal.
mav_accel.py Show accelerometer calibration for a set of logs.
apmsetrate.py Set the Stream Rate on an APM.
magtest.py Rotate APMs on bench to test magnetometers.
mavtcpsniff.py Connect as a client to two tcpip ports on localhost with mavlink packets. Pass them both directions, and show packets in human-readable format on-screen.
wptogpx.py Extract GPS data from a waypoint file, and create a GPX file, for loading into Google Earth.
mavgps.py Allows connection of the uBlox u-Center software to a uBlox GPS device connected to a PX4 or Pixhawk device, using Mavlink's SERIAL_CONTROL support to route serial traffic to/from the GPS, and exposing the data to u-Center via a local TCP connection.
mavtester.py Test mavlink messages.