platformio.ini

; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; http://docs.platformio.org/page/projectconf.html

[env:megaatmega2560]
platform=atmelavr
board=megaatmega2560
framework=arduino
build_unflags = -Os
build_flags = -DUSE_LIBDIVIDE -O3 -ffast-math -fshort-enums -funroll-loops -Wall -Wextra -std=c99
; Note that fp64lib is only used by unit tests. It isn't referenced by the firmware & will be
; ignored.
lib_deps = EEPROM, Time, fp64lib, simplyatomic
;test_build_project_src = true
test_build_src = yes
debug_tool = simavr
test_ignore = test_table3d_native

;This environment is the same as the above, however compiles for 6 channels of fuel and 3 channels of ignition
[env:megaatmega2560-6-3]
extends = env:megaatmega2560
build_flags = ${env:megaatmega2560.build_flags} -DINJ_CHANNELS=6 -DIGN_CHANNELS=3

;As the above, however compiles for 8 channels of fuel and only a single ignition channel
[env:megaatmega2560-8-1]
extends = env:megaatmega2560
build_flags = ${env:megaatmega2560.build_flags} -DINJ_CHANNELS=8 -DIGN_CHANNELS=1

[env:megaatmega2560_sim_unittest]
extends = env:megaatmega2560
build_src_flags =  ${env:megaatmega2560.build_src_flags} -DSIMULATOR
build_type = test
platform_packages =
    platformio/tool-simavr
test_speed = 9600
upload_protocol = custom
upload_command =
test_testing_command =
    ${platformio.packages_dir}/tool-simavr/bin/simavr
    -m
    atmega2560
    -f
    16000000L
    ${platformio.build_dir}/${this.__env__}/firmware.elf

[env:megaatmega2561]
extends = env:megaatmega2560
board=ATmega2561

[env:teensy35]
;platform=teensy
platform=https://github.com/platformio/platform-teensy.git
board=teensy35
framework=arduino
lib_deps = EEPROM, FlexCAN_T4, Time, SimplyAtomic
test_build_src = yes
test_ignore = test_table3d_native
extra_scripts = post:post_extra_script.py  

[env:teensy36]
;platform=teensy
platform=https://github.com/platformio/platform-teensy.git
board=teensy36
framework=arduino
lib_deps = EEPROM, FlexCAN_T4, Time, SimplyAtomic
test_build_src = yes
test_ignore = test_table3d_native

[env:teensy41]
;platform=teensy
platform=https://github.com/platformio/platform-teensy.git
board=teensy41
framework=arduino
lib_deps = EEPROM, FlexCAN_T4, Time, SimplyAtomic
test_build_src = yes
test_ignore = test_table3d_native
build_flags = -DTEENSY_INIT_USB_DELAY_AFTER=40

;STM32 Official core
[env:black_F407VE]
platform = ststm32
;platform = https://github.com/platformio/platform-ststm32.git
framework = arduino
;board = genericSTM32F407VET6
board = black_f407ve
; RTC library fixed to 1.2.0, because in newer than that the RTC fails to keep up time. At least up to 1.3.7 version
lib_deps = stm32duino/STM32duino RTC @ 1.2.0, greiman/SdFat, SimplyAtomic
board_build.core = stm32
build_flags = -DUSE_LIBDIVIDE -std=gnu++11 -UBOARD_MAX_IO_PINS -DENABLE_HWSERIAL2 -DENABLE_HWSERIAL3 -DUSBCON -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -DHAL_CAN_MODULE_ENABLED -DSERIAL_TX_BUFFER_SIZE=128 -DSERIAL_RX_BUFFER_SIZE=128
upload_protocol = dfu
debug_tool = stlink
monitor_speed = 115200

;STM32 Official core
[env:BlackPill_F401CC]
platform = ststm32
framework = arduino
board = blackpill_f401cc
lib_deps = stm32duino/STM32duino RTC @ 1.2.0, SimplyAtomic
board_build.core = stm32
build_flags = -DUSE_LIBDIVIDE -std=gnu++11 -UBOARD_MAX_IO_PINS -DUSBCON -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC -DHAL_DAC_MODULE_DISABLED -DHAL_ETH_MODULE_DISABLED -DHAL_SD_MODULE_DISABLED -DHAL_QSPI_MODULE_DISABLED 
upload_protocol = dfu
debug_tool = stlink
monitor_speed = 115200

;STM32 Official core
[env:BlackPill_F411CE_UART]
platform = ststm32
framework = arduino
board = blackpill_f411ce
lib_deps = stm32duino/STM32duino RTC @ 1.2.0, SimplyAtomic
board_build.core = stm32
build_flags = -DUSE_LIBDIVIDE -O3 -std=gnu++11 -UBOARD_MAX_IO_PINS
upload_protocol = dfu
debug_tool = stlink
monitor_speed = 115200

;STM32 Official core
[env:BlackPill_F411CE_USB]
platform = ststm32
framework = arduino
board = blackpill_f411ce
lib_deps = stm32duino/STM32duino RTC @ 1.2.0, SimplyAtomic
board_build.core = stm32
build_flags = -DUSE_LIBDIVIDE -O3 -std=gnu++11 -UBOARD_MAX_IO_PINS -DUSBCON -DHAL_PCD_MODULE_ENABLED -DUSBD_USE_CDC
upload_protocol = dfu
debug_tool = stlink
monitor_speed = 115200

;SAMD21
[env:samd21]
platform = atmelsam
framework = arduino
board = zeroUSB
;lib_deps = cmaglie/FlashStorage @ ^1.0.0
;build_flags = -DUSE_LIBDIVIDE -fpermissive -std=gnu++11 -DUSE_SPI_EEPROM
build_flags = -DUSE_LIBDIVIDE -fpermissive -std=gnu++11
upload_protocol = sam-ba

;SAME51
[env:same51]
platform = atmelsam
framework = arduino
board = adafruit_feather_m4_can
;lib_deps = cmaglie/FlashStorage @ ^1.0.0
;build_flags = -DUSE_LIBDIVIDE -fpermissive -std=gnu++11 -DUSE_SPI_EEPROM
build_flags = -DUSE_LIBDIVIDE -fpermissive -std=gnu++11
upload_protocol = sam-ba

[env:custom_monitor_speedrate]
monitor_speed = 115200

[platformio]
src_dir=speeduino
default_envs = megaatmega2560
; local.ini is ignored via .gitignore
; This allows developers to make private/local PIO configuration changes without 
; triggering Git changes in their dev tooling (E.g. VS Code)  
extra_configs = local.ini
;The following lines are for testing / experimentation only. Comment the line above to try them out
;default_envs = black_F407VE
;default_envs = teensy35
;default_envs = teensy40
;env_default = LaunchPad_tm4c1294ncpdt
;env_default = genericSTM32F103RB

[env:native]
platform = native
build_flags = -DUSE_LIBDIVIDE -std=gnu++11
debug_build_flags = -std=gnu++11 -O0 -g3
test_ignore = test_misc2, test_misc, test_decoders, test_schedules, test_fuel
debug_test = test_table3d_native
build_type = debug