diff --git a/wolfnet/lib/config.py b/wolfnet/lib/config.py index 1d583a1..38c9839 100644 --- a/wolfnet/lib/config.py +++ b/wolfnet/lib/config.py @@ -53,9 +53,10 @@ app_config = { "ACK_RETRIES": 3, - "ACK_TIMEOUT": 400, #ms (RTT was in tests aroun 270 - 290 ms -> little bit of margin) - "DEBOUNCE_TIME" : 100, #ms - "SHUTDOWN_DISPLAY_AFTER" : 120, #s + # ms (RTT was in tests aroun 270 - 290 ms -> little bit of margin) + "ACK_TIMEOUT": 400, + "DEBOUNCE_TIME": 100, # ms + "SHUTDOWN_DISPLAY_AFTER": 120, # s } lora_parameters = { @@ -103,7 +104,7 @@ "4172078668": { # PIR sensor 1, 07.2023 "is_sender": True, "actor_node": 106440645, # Either address or none to Broadcast - "action_cancel_previous" : False, + "action_cancel_previous": False, "protection_time": 1000, # 1000 ms = 1 sec "beacon_interval": 120, # seconds "beacon_jitter": 10, # seconds, will vary the above value by +- 10 seconds @@ -114,7 +115,7 @@ "2583535806": { # PIR sensor 2, 07.2023, schwarz "is_sender": True, "actor_node": 106440645, # Either address or none to Broadcast - "action_cancel_previous" : False, + "action_cancel_previous": False, "protection_time": 1000, # 1000 ms = 1 sec "beacon_interval": 120, # seconds "beacon_jitter": 10, # seconds, will vary the above value by +- 10 seconds @@ -134,11 +135,13 @@ # END SET 1 - # Start Test Set 1 - "2308316059": { # Flash Actor 2, 2023-04 + + # START SET 2 + + "2308316059": { # General actor, 2023-04 "is_sender": False, "receiver_type": NodeTypes.ULTRASOUND_CANNON, - #"receiver_type": NodeTypes.FLASH, + # "receiver_type": NodeTypes.FLASH, "beacon_interval": 120, # 120 seconds "beacon_jitter": 10, # seconds, will vary the above value by +- 10 seconds "battery_type": "analog", # Read battery from Pin 36 @@ -147,7 +150,7 @@ "2424541685": { # PIR sensor 3, 07.2023, schwarz "is_sender": True, "actor_node": 2308316059, # Either address or none to Broadcast - "action_cancel_previous" : False, + "action_cancel_previous": False, "protection_time": 1000, # 1000 ms = 1 sec "beacon_interval": 120, # seconds "beacon_jitter": 10, # seconds, will vary the above value by +- 10 seconds @@ -156,36 +159,87 @@ "use_ack": True, # Use acks }, - # End Test Set 1 + "3282280225": { # PIR sensor 4, 07.2023, schwarz + "is_sender": True, + "actor_node": 2308316059, # Either address or none to Broadcast + "action_cancel_previous": False, + "protection_time": 1000, # 1000 ms = 1 sec + "beacon_interval": 120, # seconds + "beacon_jitter": 10, # seconds, will vary the above value by +- 10 seconds + "battery_type": "max17043", + "gpio_button_irq": 13, # IRQ on pin 13 + "use_ack": True, # Use acks + }, + # END SET 2 - "2276286798": { # PIR sensor + # START SET 3 + + "951712297": { # Universal Actor + "is_sender": False, + "receiver_type": NodeTypes.ULTRASOUND_CANNON, + # "receiver_type": NodeTypes.FLASH, + "beacon_interval": 120, # 120 seconds + "beacon_jitter": 10, # seconds, will vary the above value by +- 10 seconds + "battery_type": "analog", # Read battery from Pin 36 + "gpio_led_status": 13, # Status LED on pin 13 + }, + "3902023872": { # PIR sensor 5, 07.2023, schwarz, new type "is_sender": True, - "actor_node": None, # Either address or none to Broadcast - "msg_type": NodeTypes.FLASH, - "action_frequency": 20, # Hz - "action_duration": 4000, # 4000 ms = 4 sec + "actor_node": 951712297, # Either address or none to Broadcast "action_cancel_previous": False, - "protection_time": 60000, # 60000 ms = 60 sec - "beacon_interval": 240, # seconds + "protection_time": 1000, # 1000 ms = 1 sec + "beacon_interval": 120, # seconds "beacon_jitter": 10, # seconds, will vary the above value by +- 10 seconds "battery_type": "max17043", "gpio_button_irq": 13, # IRQ on pin 13 + "use_ack": True, # Use acks + }, + "3454793720": { # PIR sensor 6, 07.2023, schwarz, new type + "is_sender": True, + "actor_node": 951712297, # Either address or none to Broadcast + "action_cancel_previous": False, + "protection_time": 1000, # 1000 ms = 1 sec + "beacon_interval": 120, # seconds + "beacon_jitter": 10, # seconds, will vary the above value by +- 10 seconds + "battery_type": "max17043", + "gpio_button_irq": 13, # IRQ on pin 13 + "use_ack": True, # Use acks }, - "320270687": { # Ultrasonic actor, 2023-07-05 + + # END SET 3 + + + "320270687": { # General Actor, problem? "is_sender": False, "receiver_type": NodeTypes.ULTRASOUND_CANNON, + # "receiver_type": NodeTypes.FLASH, "beacon_interval": 120, # 120 seconds "beacon_jitter": 10, # seconds, will vary the above value by +- 10 seconds "battery_type": "analog", # Read battery from Pin 36 - "action_cancel_previous": True, - "action_duration": 10000, # 10000 ms = 10 sec + "gpio_led_status": 13, # Status LED on pin 13 + }, + + + "2276286798": { # PIR sensor + "is_sender": True, + "actor_node": None, # Either address or none to Broadcast + "msg_type": NodeTypes.FLASH, + "action_frequency": 20, # Hz + "action_duration": 4000, # 4000 ms = 4 sec + "action_cancel_previous": False, + "protection_time": 60000, # 60000 ms = 60 sec + "beacon_interval": 240, # seconds + "beacon_jitter": 10, # seconds, will vary the above value by +- 10 seconds + "battery_type": "max17043", + "gpio_button_irq": 13, # IRQ on pin 13 }, + "4291548233": { # Flash actor "is_sender": False, "receiver_type": NodeTypes.FLASH, @@ -235,16 +289,6 @@ "action_cancel_previous": True, "action_duration": 10000, # 10000 ms = 10 sec }, - "951712297": { # Flash Actor - "is_sender": False, - "receiver_type": NodeTypes.FLASH, - "beacon_interval": 120, # 120 seconds - "beacon_jitter": 10, # seconds, will vary the above value by +- 10 seconds - "battery_type": "analog", # Read battery from Pin 36 - "action_cancel_previous": True, - "action_duration": 10000, # 10000 ms = 10 sec - "gpio_led_status": 13, # Status LED on pin 13 - }, "3567154165": { # Ultrasonic actor, 2023-04 "is_sender": False, "receiver_type": NodeTypes.ULTRASOUND_CANNON,