Getting Started with Tornado Using Docker

Introduction

Running Tornado using Docker is a simple way to get up and running quickly. Tornado can be launched via Docker with only a few steps with a default configuration and can also fully configured via the launching process.

This guide assumes the user is already familiar with Docker and focuses on the Docmosis Tornado specifics.

Contents

• Running Tornado using Docker
• Container Settings
  • Logging outside of the Docker Container
  • Enabling Debug Logging
• Running Tornado using Docker Compose
• Running the Server and Testing
  • Creating Dummy Data
  • Creating a Document
• Generating Documents from Your Application
  • Comparing Tornado with Docmosis Cloud
• Monitoring Tornado
• More Help
• All Configuration Options
  • Common Settings
  • Control of Logging
  • Enabling SSL/TLS Encryption
  • Enabling Email from Tornado
• License

Running Tornado using Docker

The following steps will create a running Tornado server for you to work with.

1. Obtain a Tornado Trial license key from https://www.docmosis.com/try/tornado.html

2. Create a folder on your computer (the docker host) where you will put your Docmosis templates. We will map this to a folder inside the Docker container and Tornado will find templates you place into this folder.

3. Build the Docmosis Tornado Docker image:

   docker build --tag docmosis/tornado https://raw.githubusercontent.com/docmosis/tornado-docker/master/Dockerfile

4. Launch a Tornado container as follows, inserting your license key and path to templates folder.

For example, in Linux to use a folder /home/docmosisTemplates with a Tornado host running on port 8080:

Linux Shell:

docker run -p 8080:8080 \
  -v /home/docmosisTemplates:/home/docmosis/templates \
  -e DOCMOSIS_KEY=XXXX-XXXX-XXXX-XXXX-X-XXXX \
  -e DOCMOSIS_SITE="Free Trial Tornado" \
  -e DOCMOSIS_ADMINPW=xxxmypwxxx \
  docmosis/tornado

For example, in Windows to use a folder C:\docmosisTemplates with a Tornado host running on port 8080:

Using Windows CMD:

docker run -p 8080:8080 ^
  -v C:\docmosisTemplates:/home/docmosis/templates ^
  -e DOCMOSIS_KEY=XXXX-XXXX-XXXX-XXXX-X-XXXX ^
  -e DOCMOSIS_SITE="Free Trial Tornado" ^
  -e DOCMOSIS_ADMINPW=xxxmypwxxx ^
  docmosis/tornado

Using Windows PowerShell:

docker run -p 8080:8080 `
  -v C:\docmosisTemplates:/home/docmosis/templates `
  -e DOCMOSIS_KEY=XXXX-XXXX-XXXX-XXXX-X-XXXX `
  -e DOCMOSIS_SITE="Free Trial Tornado" `
  -e DOCMOSIS_ADMINPW=xxxmypwxxx `
  docmosis/tornado

Container Settings

The Docmosis Tornado Docker synopsis is (Linux style commands are used from here on):

docker run --name [container name] \
  -p [host port]:8080 \
  -v [host templates directory]:/home/docmosis/templates \
  -e DOCMOSIS_KEY=[license key] \
  -e DOCMOSIS_SITE=[license site] \
  -e DOCMOSIS_ADMINPW=xxxmypwxxx \
  docmosis/tornado

Parameters:
  --name  The name of the container (default: auto generated).
  -p      The port mapping of the host port to the container port.
          Port 8080 is used for both the REST service and the web console.
  -v      The absolute path to your templates directory on the host system.
  -e      Set environment variables inside the container.

The -e flag can be used multiple times to set different configuration values as shown by the examples and the synopsis above. There are a lot of parameters that can be configured, as detailed in the section titled All Configuration Options below. Some examples are listed here for typical use-cases.

Logging outside of the Docker Container

The Tornado container will by default log to console. You may instead wish to have the logs written to a file outside of the Docker container so they are accessible (and persistent). To write the logs to file, you can override the configuration to a blank value, and then map a volume to the default log folder /home/docmosis/workingarea/logs.

To set the logging to write outside the container:

docker run --name [container name] \
  -p [host port]:8080 \
  -v [host templates directory]:/home/docmosis/templates \
  -e DOCMOSIS_KEY=[license key] \
  -e DOCMOSIS_SITE=[license site] \
  -e DOCMOSIS_JAVA_LOGGING_CONFIG_FILE= \
  -v [host logging directory]:/home/docmosis/workingarea/logs \
  docmosis/tornado

Enabling Debug Logging

To have more detailed logging enable debug by setting the log level as follows:

docker run --name [container name] \
  -p [host port]:8080 \
  -v [host templates directory]:/home/docmosis/templates \
  -e DOCMOSIS_KEY=[license key] \
  -e DOCMOSIS_SITE=[license site] \
  -e DOCMOSIS_LOG_LEVEL=DEBUG
  docmosis/tornado

Running Tornado using Docker Compose

It can be useful to define the launch configuration in a Docker Compose file. The following content could be placed in your docker-compose.yml file:

version: '3.3'

services:

  tornado:
    build: https://raw.githubusercontent.com/docmosis/tornado-docker/master/Dockerfile
    ports:
     - "[host port]:8080"
    volumes:
     - [host templates directory]:/home/docmosis/templates
    environment:
      DOCMOSIS_KEY: "[license key]"
      DOCMOSIS_SITE: "[license site]"
      DOCMOSIS_ADMINPW: "[admin password]"

Running the Server and Testing

When Docmosis Tornado has started successfully, you can point your browser to Docker container to use the Tornado Web Console. If Tornado has started successfully, you will be navigated to the Status tab and the engine status will be Running. In this screen you can select templates and run test data to generate Documents. This is a useful test-platform that can assist development before generating documents via the API.

If the start up is not succesful review the ouput logged from the Docker command. This will typically indicate what has gone wrong.

The configuration that Tornado has started with can also be viewed via the configuration tab of the Web Console should you need to debug the settings are being correctly applied.

Creating Dummy Data

From the Tornado Status Page can create dummy data (either JSON or XML) based on the template you have selected. Tornado queries the template for fields and has its "best guess" at creating data that matches the template.

Templates can contain complicated structures for repeating and nested data, so you may need to adjust the generated data structure so that it looks like your expected data.

Tornado will generate data values: "value1", "value2" and so on – which you can change to look more like your data.

Creating a Document

You can create a document from the Tornado Status Page.

If you render a PDF only and your browser is configured with a PDF viewer, the output file will be displayed in the browser panel on the right.

If you choose any other formats, or combinations of formats, you will receive the rendered document as a download.

Generating Documents from Your Application

The Tornado Status Page displays the Render URL to use for calling the Render service (just below the Engine status).

This is the URL to use with your client code / libraries to request documents to be rendered.

You should refer to the Tornado Web Services Guide in the Resources area of the Docmosis site https://www.docmosis.com/resources/tornado.html for details about invoking the render service.

Comparing Tornado with Docmosis Cloud

Note that Docmosis Tornado provides only the render service. The Docmosis Cloud service provides other services to support producing documents in a cloud environment. The render service is identical to that provided by the cloud service except for:

1. The URL is different - you will direct the requests to your local Docmosis Tornado server instead of the public Cloud Service

2. The following REST web services are provided (more details are provided in the Tornado Web Services Guide):

   a. "render" – create a document

   b. "getTemplateStructure" – get a JSON description of the structure of a template

   c. "convert" – convert the supplied document to another format (without any data merging)

   d. "ping" and "status" – determine the Tornado operational status

3. Store-to directives for cloud and AWS (Amazon S3) storage are not available

4. REST clients do not need to supply an access key (unless you set one in the configuration tab)

5. Emailing documents is supported as long as you have configured an email gateway into Docmosis Tornado configuration

Monitoring Tornado

Tornado includes two web service end-points to support automated monitoring:

"ping" e.g. http://localhost:8080/api/ping

"status" e.g. http://localhost:8080/api/status

See the Tornado Web Services Guide for details about these monitoring end-points.

More Help

Docmosis document generation provides a large number of features controlled from both the templates and from the data. To get the most out of Docmosis, please read the Developer Guide and Template Guides on the Docmosis web site under the Resources area:

https://www.docmosis.com/resources/all-resources.html

We hope you enjoy using Tornado.

All Configuration Options

Common Settings

The following settings can be added to the Custom Settings on the Configuration page to enable

• port
  Specify the port on which the console and the web services will listen

  docker run -p 8080:8090 \
   -e DOCMOSIS_PORT=8090 \
   ...
  

• license
  Specify the Tornado license all as one string. This includes the key and the site and overrides the key and site parameters below. "\n" is used to provide separate lines.

  docker run \
   -e DOCMOSIS_LICENSE="docmosis.key=XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-XXXX-X-XXXX\ndocmosis.site=Free Trial Tornado" \
   ...
  

• key
  Specify the key part of the Tornado license. This requires the site or site1-3 parameters also.

  docker run \
  -e DOCMOSIS_KEY=XXXX-XXXX-XXXX-XXXX-X-XXXX \
  -e DOCMOSIS_SITE="Free Trial Tornado" \
  ...
  

  or

  docker run \
  -e DOCMOSIS_KEY=XXXX-XXXX-XXXX-XXXX-X-XXXX \
  -e DOCMOSIS_SITE1="Free Trial Tornado" \
  -e DOCMOSIS_SITE2="next line of site string" (if required)" \
  -e DOCMOSIS_SITE3="another line of site string" (if required)" \
  ...
  

• site
  The full site string using "\n" to specify multiple lines as require (if key is multiple lines). Overrides the site1..site3 parameters and requires the key parameter.

• site1
  Specify the first line of the site

• site2
  Specify the second line of the site (if required)

• site3
  Specify the third line of the site (if required)

• officeDir
  Specify the office install location for LibreOffice

  docker run \
   -e DOCMOSIS_OFFICEDIR=/opt/libreoffice \
   ...
  

• templatesDir
  Specify where templates will be sourced from (original templates)

  docker run \
   -e DOCMOSIS_TEMPLATESDIR=/home/docmosis/templates \
   ...
  

• workingDir
  Specify where logs and working caches are to be stored

  docker run \
   -e DOCMOSIS_WORKINGDIR=/home/docmosis/workingarea \
   ...
  

• allowUNCPaths
  Allow paths to be configured that are UNC paths.

  docker run \
   -e DOCMOSIS_ALLOWUNCPATHS=true \
   ...
  

• adminPw
  Specify the admin password for access the web console. Optional.

  docker run \
   -e DOCMOSIS_ADMINPW=password \
   ...
  

• adminPwAllowBlank
  Allow the password to be blank (assumes deployed in otherwise secured environment). Optional.

  docker run \
   -e DOCMOSIS_ADMINPWALLOWBLANK=true \
   ...
  

• accessKey
  Specify the access key for calling the web service end points. Optional.

  docker run \
   -e DOCMOSIS_ACCESSKEY=access-key \
   ...
  

• customSettings
  Specify any custom settings using the format key=value and separating settings by "\n".

  docker run \
   -e DOCMOSIS_CUSTOMSETTINGS="docmosis.xyz=abc\ndocmosis.xyz.2=def" \
   ...
  

• templatePrefix
  Specify the template field prefix. Defaults to <<. Must be at least 2 chars.

  docker run \
   -e DOCMOSIS_TEMPLATEPREFIX=<< \
   ...
  

• templateSuffix
  Specify the template field suffix. Defaults to >>. Must be at least 2 chars.

  docker run \
   -e DOCMOSIS_TEMPLATESUFFIX=>> \
   ...
  

• installSamples
  Specify whether to install sample templates at startup. Defaults to true.

  docker run \
   -e DOCMOSIS_INSTALLSAMPLES=false \
   ...
  

Control of Logging

Logging of information by Tornado can be controlled by several command line settings:

• log.level=debug|info|error
  Specify the level of logging to the console and log files.

  docker run \
   -e DOCMOSIS_LOG_LEVEL=debug= \
   ...
  

• java.util.logging.config.file=path
  Specify the Java Util logging configuration file. Overrides log.level.

  docker run \
   -e DOCMOSIS_JAVA_UTIL_LOGGING_CONFIG_FILE=/home/docmosis/logging.properties \
   ...
  

• log.dir.override
  Override the location where logs are to be written (default is [working area]/logs)

  docker run \
   -e DOCMOSIS_LOG_DIR_OVERRIDE=/home/docmosis/workingarea/logs \
   ...
  

Enabling SSL/TLS Encryption

The following settings can be added to the Custom Settings on the Configuration page to enable SSL/TLS Encryption:

• ssl.port=port
  The port to listen for secured connections.

• javax.net.ssl.keyStore=path
  The path to the key store file.

• javax.net.ssl.keyStorePassword=password
  The key store file password.

• javax.net.ssl.trustStore=path
  The path to the trust store file.

• javax.net.ssl.trustStorePassword=password
  The trust store file password.

• http.disable=true|false
  Determines whether the non-secure listener should be disabled. Defaults to false.

  docker run -p 8081:8081 \
   -e DOCMOSIS_SSL_PORT=8081 \
   -e DOCMOSIS_JAVAX_NET_SSL_KEYSTORE=/home/docmosis/keystore \
   -e DOCMOSIS_JAVAX_NET_SSL_KEYSTOREPASSWORD=password \
   -e DOCMOSIS_JAVAX_NET_SSL_TRUSTSTORE=/home/docmosis/truststore \
   -e DOCMOSIS_JAVAX_NET_SSL_TRUSTSTOREPASSWORD=password \
   -e DOCMOSIS_HTTP_DISABLE=true \
   ...
  

Please see your Java documentation for more information on the specifics of what these settings do.

Other Network Settings

The following settings provide network specific adjustments:

• address.listen=<address>
  The network address on which to listen for requests. Defaults to all networks (0.0.0.0).

• keepAlive=true|false
  Specify whether to set keep alive on network connections. This useful in environments where network infrastructure agressively closes idle connections. (eg long running renders in Azure). Defaults to false.

Enabling Email from Tornado

• mailEnabled
  Enable the mail server. Default is false.

• mailHost
  The mail server hostname

• mailPort
  The mail server port

• mailUser
  The mail server user name

• mailPw
  The mail server password

• mailFrom
  The from email address

• mailTimeout
  The mail server connect-timeout in milliseconds

• mailUseTls
  Enable TLS security on the connection to the mail server. Default false.

• mailUseSsl
  Enable SSL security on the connection to the mail server. Default false.

• mailSecurityProtocols
  Specify the security protocols to use (comma separated) (default TLSv1.2. Blank value means use JVM default).

• mailConnectRetryMaxTimes
  Set the maximum number of attempts to connect to the mail server. Default 2.

• mailConnectRetryMinWaitMillis
  Set the minimum wait time to get a connection to the mail server. Default 5000ms.

• mailConnectRetryMaxWaitMillis
  Set the maximum wait time to get a connection to the mail server. Default 20000ms.

• mailConnectRetryRebuildTransport
  Rebuild the Message Transport object on failure to connect. Default true.

• mailSendRetryMaxTimes
  Set the maximum number of attempts to send email. Default 2.

• mailCustomHeadersAdd
  Add a custom mail header. Default true.

• mailCustomHeadersName
  Set the custom header name. Default X-DWS-Tag-1

  docker run \
   -e DOCMOSIS_MAILENABLED=true \
   -e DOCMOSIS_MAILHOST=example.com \
   -e DOCMOSIS_MAILPORT=25 \
   -e DOCMOSIS_MAILUSER=user \
   -e DOCMOSIS_MAILPW=password \
   -e DOCMOSIS_MAILFROM=user@example.com \
   -e DOCMOSIS_MAILTIMEOUT=60000 \
   -e DOCMOSIS_MAILUSETLS=true \
   -e DOCMOSIS_MAILUSESSL=true \
   ...
  

License

By downloading Tornado you agree to our most recent License Agreement (PDF).

As with all Docker images, these likely also contain other software which may be under other licenses (such as Bash, etc from the base distribution, along with any direct or indirect dependencies of the primary software being contained).

As for any pre-built image usage, it is the image user's responsibility to ensure that any use of this image complies with any relevant licenses for all software contained within.