Welcome to GloDroid Discussions!

[rsglobal]

👋 Welcome!

We’re using Discussions as a place to connect with other members of our community. We hope that you:

• Ask questions you’re wondering about.
• Share ideas.
• Engage with other community members.
• Welcome others and are open-minded. Remember that this is a community we
  build together 💪.

To get started, comment below with an introduction of yourself and tell us about what you do with this community.

[MyOxy]

I'm sorry, but your install instructions aren't working and on your discord channel, no one answers.
Building is also not working. running always in error while kernel building. Also in discord no answers.
I'm building since month AOSP A11 GSI and several other roms. So my environment is OK. for me it looks like your repositories aren't in line.

Is there any chance to get support ?

[MyOxy]

this is the error
FAILED: out/target/product/pinephone/obj/UBOOT_OBJ/u-boot-sunxi-with-spl.bin

[rsglobal]

I have never had this error.
But googling gave me this:
automl/auto-sklearn#314 (comment)

Hope it will help you too.

[MyOxy]

thx, now I'm getting lots of python errors. Seem your scripts are needing old python2. So I give up, because I don't wont downgrade my building maschine.

thx for your help

[plambe74]

Hi MyOxy,
I do not see how can you conclude that?
On my side I did not have issues with Python3.
And GloDroid is definetely using it.
Do you have some particular Python setup yourself?

You already got supported in fixing 2 issues at least that were not really GloDroid issues and rsglobal has been really polite with you.

I would suggest that you share your particular error log and very likely you will get further support.

Check if you have sym-linked python to your Python2 for some reason in the past.

[rsglobal]

You do not need to downgrade anything. pip2 can co-exist with python3 / pip3
Mesa3d should stop requiring python2 in the near future, but we have to manually install python2-mako ATM.
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3674

[joek85]

Hello,
I've created a bash script to build kernel and uboot outside of Android source tree, for me this helps have more control over the build, because as Android stated that it is recommended to separate device blobs from the root source tree.

https://github.com/joek85/Glodroid-build-script

[joek85]

Do you know which columns are missing? I'm afraid I can not interpret results correctly in this shape.

Browse Fragment (Fast lane scroll),5
Browse Fragment (Content scroll),5
Browse Fragment (Fast lane scroll no bitmap upload),5
Browse Fragment (Content scroll no bitmap upload),5
Dialog List,5
Invalidate Tree,1
Fading Edge ListView,5
SaveLayer Animation,1
Slow Bind RecyclerView,3
Slow Nested RecyclerView,5
Slow Nested RecyclerView (Initial fling),5
Navigation Drawer Activity,5
Notification Shade,3
Resize HW Layer,1
Clipped ListView,5

some classes are missing like UiBenchLeanbackJankTests
the numbers at the end are the number of retries

[rsglobal]

Here is my run:

GD5.1_opi_plus2e_FULLHD.txt
Overall performance looks quite impressive. There are some glitches, some of them GLES related, and some related to sun4i DRM/KMS driver. I will report GLES related to mesa3d next week.

[joek85]

Overall performance looks quite impressive. There are some glitches

you are talking about my results or yours?

[MbappeTNul]

I love U guys (despise all not working cases) and I will make you rich if gps and calls are setup before 2023 (I am on pinephone). I didn't understood your wiki, so I followed this install:

1. flash sd card with deploy-sd-for.emmc.img
2. insert sd card in phone and connect to pc with red usb cable
3. phone display will remain black but wait 10secs
4. open terminal on pc and goto directory where archive extracted
5. run install script, eg bash ./flash-emmc.sh
6. when script pauses, hold power button for 10secs, disconnect cable
7. remove sd card, reconnect usb cable and press enter
8. phone will display fastboot menu and script will continue
9. if failure message, run install script again
10. if success message, reboot phone to start android

• if adb not already installed on pc then sudo apt install adb
• don't want install to emmc? substitute with deploy-sd.img
  and flash-sd.sh
• some reports of usb issues which prevent deploy method of install - in which case, read this thread or download v0.20 and flash as a regular image

Thank you

[rsglobal]

Hi, please refer to this video: https://www.youtube.com/watch?v=ZdmBq0rFPa8&ab_channel=LINMOBnet

[MailtonViana]

HI Project owner,
I got to build it on the Raspberry Pi, but I would like to know if your AOSP project supports GPIO inputs to use external sensors?
Tks

[rsglobal]

Hi @MailtonViana ,

I never tried to do something like that, therefore can't suggest anything. But you may ask it at our discord channel: https://discord.gg/2z5VUv6