From 80594fa132c51aa77f13846c7311a10e9e114c7a Mon Sep 17 00:00:00 2001 From: Hieromon Ikasamo Date: Tue, 10 Jan 2023 22:48:42 +0900 Subject: [PATCH] Added cause of OTA failure --- docs/faq.html | 17 ++++++++ docs/search/search_index.json | 2 +- docs/sitemap.xml | 80 +++++++++++++++++----------------- docs/sitemap.xml.gz | Bin 485 -> 484 bytes 4 files changed, 58 insertions(+), 41 deletions(-) diff --git a/docs/faq.html b/docs/faq.html index 42c36d61..d01ffe36 100644 --- a/docs/faq.html +++ b/docs/faq.html @@ -1229,6 +1229,13 @@ Unauthorize error without prompting the login dialog. + + +
  • + + Uploaded BIN via OTA, but the sketch stopped after reboot. + +
  • @@ -1596,6 +1603,13 @@ Unauthorize error without prompting the login dialog. +
    • + +
  • + + Uploaded BIN via OTA, but the sketch stopped after reboot. + +
  • @@ -1979,6 +1993,9 @@

    Unauthorize error without prompting the login dialog.

    The custom web pages that require authentication will occur unauthorized error always without prompting the login dialog under the captive portal state on some OS. This is a captive portal restriction and expected behavior. The captive portal web browser is almost a complete web browser, but while the captive portal session restricts the response to WWW-authenticate requests. (In intrinsically, the captive portal is a mechanism for authentication in itself)

    Once you exit from the captive portal session and connect SoftAP IP directly afresh, you can access custom web pages along with prompting a login dialog.

    +

    Uploaded BIN via OTA, but the sketch stopped after reboot.

    +

    Perhaps the current sketch as the uploader does not match the partition size of the BIN file to be uploaded. For example, if the current sketch (i.e. it performs OTA) is built with a partition table of Default.csv and the new BIN file to be updated is min_spiffs.csv.

    +

    Also, the file system of the uploader sketch and the uploaded sketch must be the same. If the file system of the uploader sketch is SPIFFS while the uploaded BIN file is LITTLEFS, file system initialization will fail.

    Still, not stable with my sketch.

    If AutoConnect behavior is not stable with your sketch, you can try the following measures.

    1. Change WiFi channel

    diff --git a/docs/search/search_index.json b/docs/search/search_index.json index aaff595a..2bf8b848 100644 --- a/docs/search/search_index.json +++ b/docs/search/search_index.json @@ -1 +1 @@ -{"config":{"indexing":"full","lang":["en"],"min_search_length":3,"prebuild_index":false,"separator":"[\\s\\-]+"},"docs":[{"location":"index.html","text":"AutoConnect for ESP8266/ESP32 \u00b6 An Arduino library for ESP8266/ESP32 WLAN configuration at run time with web interface. Overview \u00b6 To the dynamic configuration for joining to WLAN with SSID and PSK accordingly. It an Arduino library united with ESP8266WebServer class for ESP8266 or WebServer class for ESP32. Easy implementing the Web interface constituting the WLAN for ESP8266/ESP32 WiFi connection. With this library to make a Sketch easily which connects from ESP8266/ESP32 to the access point at runtime by the web interface without hard-coded SSID and password. No need pre-coded SSID & password \u00b6 It is no needed hard-coding in advance the SSID and Password into the Sketch to connect between ESP8266/ESP32 and WLAN. You can input SSID & Password from a smartphone via the web interface at runtime. Simple usage \u00b6 AutoConnect control screen will be displayed automatically for establishing new connections. It aids by the captive portal when vested the connection cannot be detected. By using the AutoConnect menu , to manage the connections convenient. Store the established connection \u00b6 The connection authentication data as credentials are saved automatically in the flash of ESP8266/ESP32 and You can select the past SSID from the AutoConnect menu . Easy to embed in \u00b6 AutoConnect can be placed easily in your Sketch. It's \" begin \" and \" handleClient \" only. Lives with your Sketches \u00b6 The Sketches which provide the web page using ESP8266WebServer there is, AutoConnect will not disturb it. AutoConnect can use an already instantiated ESP8266WebServer object, or itself can assign it. This effect also applies to ESP32. The corresponding class for ESP32 will be the WebServer. Easy to add the custom Web pages ENHANCED w/v0.9.7 \u00b6 You can easily add your owned web pages that can consist of representative HTML elements and invoke them from the menu. Further it possible importing the custom Web pages declarations described with JSON which stored in PROGMEM, SPIFFS, or SD. Quick and easy to equip the OTA update feature UPDATED w/v1.1.5 \u00b6 You can quickly and easily equip the OTA update feature to your Sketch and also you can operate the firmware update process via OTA from AutoConnect menu. Installation \u00b6 Requirements \u00b6 Supported hardware \u00b6 Generic ESP8266 modules (applying the ESP8266 Community's Arduino core) Adafruit HUZZAH ESP8266 (ESP-12) ESP-WROOM-02 Heltec WiFi Kit 8 NodeMCU 0.9 (ESP-12) / NodeMCU 1.0 (ESP-12E) Olimex MOD-WIFI-ESP8266 SparkFun Thing SweetPea ESP-210 ESP32Dev Board (applying the Espressif's arduino-esp32 core) SparkFun ESP32 Thing WEMOS LOLIN D32 Ai-Thinker NodeMCU-32S Heltec WiFi Kit 32 M5Stack And other ESP8266/ESP32 modules supported by the Additional Board Manager URLs of the Arduino-IDE. About flash size on the module The AutoConnect Sketch size is relatively large. Large flash capacity is necessary. 512Kbyte (4Mbits) flash inclusion module such as ESP-01 is not recommended. Required libraries \u00b6 AutoConnect requires the following environment and libraries. Arduino IDE The current upstream at the 1.8 level or later is needed. Please install from the official Arduino IDE download page . This step is not required if you already have a modern version. ESP8266 Arduino core AutoConnect targets Sketches made on the assumption of ESP8266 Community's Arduino core . Stable 2.4.0 or higher required and the latest release is recommended. Install third-party platform using the Boards Manager of Arduino IDE. Package URL is http://arduino.esp8266.com/stable/package_esp8266com_index.json ESP32 Arduino core Also, to apply AutoConnect to ESP32, the arduino-esp32 core provided by Espressif is needed. Stable 1.0.1 or required and the latest release is recommended. Install third-party platform using the Boards Manager of Arduino IDE. You can add multiple URLs into Additional Board Manager URLs field, separating them with commas. Package URL is https://dl.espressif.com/dl/package_esp32_index.json for ESP32. Arduino core for ESP32 1.0.3 or later For ESP32, AutoConnect v1.0.0 later is required for arduino-esp32 1.0.3 or later. Additional library (Required) The PageBuilder library to build HTML for ESP8266WebServer is needed. To install the PageBuilder library into your Arduino IDE, you can use the Library Manager . Select the board of ESP8266 series in the Arduino IDE, open the library manager and search keyword ' PageBuilder ' with the topic ' Communication ', then you can see the PageBuilder . The latest version is required 1.4.2 later . 1 Additional library (Optional) By adding the ArduinoJson library, AutoConnect will be able to handle the custom Web pages described with JSON. Since AutoConnect v0.9.7 you can insert user-owned web pages that can consist of representative HTML elements as styled TEXT, INPUT, BUTTON, CHECKBOX, SELECT, SUBMIT and invoke them from the AutoConnect menu. These HTML elements can be added by Sketches using the AutoConnect API. Further it possible importing the custom Web pages declarations described with JSON which stored in PROGMEM, SPIFFS, or SD. ArduinoJson is required to use this feature. 2 AutoConnect can work with ArduinoJson both version 5 and version 6 . Install the AutoConnect \u00b6 Clone or download from the AutoConnect GitHub repository . When you select Download, you can import it to Arduino IDE immediately. After downloaded, the AutoConnect-master.zip file will be saved in your download folder. Then in the Arduino IDE, navigate to \"Sketch > Include Library\" . At the top of the drop down list, select the option to \"Add .ZIP Library...\" . Details for Arduino official page . Supported by Library manager. AutoConnect was added to the Arduino IDE library manager. It can be used with the PlatformIO library also. window.onload = function() { Gifffer(); }; Since AutoConnect v1.2.3, PageBuilder v1.5.0 later is required. \u21a9 Using the AutoConnect API natively allows you to Sketch custom Web pages without JSON. \u21a9","title":"Overview"},{"location":"index.html#autoconnect-for-esp8266esp32","text":"An Arduino library for ESP8266/ESP32 WLAN configuration at run time with web interface.","title":"AutoConnect for ESP8266/ESP32"},{"location":"index.html#overview","text":"To the dynamic configuration for joining to WLAN with SSID and PSK accordingly. It an Arduino library united with ESP8266WebServer class for ESP8266 or WebServer class for ESP32. Easy implementing the Web interface constituting the WLAN for ESP8266/ESP32 WiFi connection. With this library to make a Sketch easily which connects from ESP8266/ESP32 to the access point at runtime by the web interface without hard-coded SSID and password.","title":"Overview"},{"location":"index.html#no-need-pre-coded-ssid-password","text":"It is no needed hard-coding in advance the SSID and Password into the Sketch to connect between ESP8266/ESP32 and WLAN. You can input SSID & Password from a smartphone via the web interface at runtime.","title":" No need pre-coded SSID & password"},{"location":"index.html#simple-usage","text":"AutoConnect control screen will be displayed automatically for establishing new connections. It aids by the captive portal when vested the connection cannot be detected. By using the AutoConnect menu , to manage the connections convenient.","title":" Simple usage"},{"location":"index.html#store-the-established-connection","text":"The connection authentication data as credentials are saved automatically in the flash of ESP8266/ESP32 and You can select the past SSID from the AutoConnect menu .","title":" Store the established connection"},{"location":"index.html#easy-to-embed-in","text":"AutoConnect can be placed easily in your Sketch. It's \" begin \" and \" handleClient \" only.","title":" Easy to embed in"},{"location":"index.html#lives-with-your-sketches","text":"The Sketches which provide the web page using ESP8266WebServer there is, AutoConnect will not disturb it. AutoConnect can use an already instantiated ESP8266WebServer object, or itself can assign it. This effect also applies to ESP32. The corresponding class for ESP32 will be the WebServer.","title":" Lives with your Sketches"},{"location":"index.html#easy-to-add-the-custom-web-pages-enhanced-wv097","text":"You can easily add your owned web pages that can consist of representative HTML elements and invoke them from the menu. Further it possible importing the custom Web pages declarations described with JSON which stored in PROGMEM, SPIFFS, or SD.","title":" Easy to add the custom Web pages ENHANCED w/v0.9.7"},{"location":"index.html#quick-and-easy-to-equip-the-ota-update-feature-updated-wv115","text":"You can quickly and easily equip the OTA update feature to your Sketch and also you can operate the firmware update process via OTA from AutoConnect menu.","title":" Quick and easy to equip the OTA update feature UPDATED w/v1.1.5"},{"location":"index.html#installation","text":"","title":"Installation"},{"location":"index.html#requirements","text":"","title":"Requirements"},{"location":"index.html#supported-hardware","text":"Generic ESP8266 modules (applying the ESP8266 Community's Arduino core) Adafruit HUZZAH ESP8266 (ESP-12) ESP-WROOM-02 Heltec WiFi Kit 8 NodeMCU 0.9 (ESP-12) / NodeMCU 1.0 (ESP-12E) Olimex MOD-WIFI-ESP8266 SparkFun Thing SweetPea ESP-210 ESP32Dev Board (applying the Espressif's arduino-esp32 core) SparkFun ESP32 Thing WEMOS LOLIN D32 Ai-Thinker NodeMCU-32S Heltec WiFi Kit 32 M5Stack And other ESP8266/ESP32 modules supported by the Additional Board Manager URLs of the Arduino-IDE. About flash size on the module The AutoConnect Sketch size is relatively large. Large flash capacity is necessary. 512Kbyte (4Mbits) flash inclusion module such as ESP-01 is not recommended.","title":"Supported hardware"},{"location":"index.html#required-libraries","text":"AutoConnect requires the following environment and libraries. Arduino IDE The current upstream at the 1.8 level or later is needed. Please install from the official Arduino IDE download page . This step is not required if you already have a modern version. ESP8266 Arduino core AutoConnect targets Sketches made on the assumption of ESP8266 Community's Arduino core . Stable 2.4.0 or higher required and the latest release is recommended. Install third-party platform using the Boards Manager of Arduino IDE. Package URL is http://arduino.esp8266.com/stable/package_esp8266com_index.json ESP32 Arduino core Also, to apply AutoConnect to ESP32, the arduino-esp32 core provided by Espressif is needed. Stable 1.0.1 or required and the latest release is recommended. Install third-party platform using the Boards Manager of Arduino IDE. You can add multiple URLs into Additional Board Manager URLs field, separating them with commas. Package URL is https://dl.espressif.com/dl/package_esp32_index.json for ESP32. Arduino core for ESP32 1.0.3 or later For ESP32, AutoConnect v1.0.0 later is required for arduino-esp32 1.0.3 or later. Additional library (Required) The PageBuilder library to build HTML for ESP8266WebServer is needed. To install the PageBuilder library into your Arduino IDE, you can use the Library Manager . Select the board of ESP8266 series in the Arduino IDE, open the library manager and search keyword ' PageBuilder ' with the topic ' Communication ', then you can see the PageBuilder . The latest version is required 1.4.2 later . 1 Additional library (Optional) By adding the ArduinoJson library, AutoConnect will be able to handle the custom Web pages described with JSON. Since AutoConnect v0.9.7 you can insert user-owned web pages that can consist of representative HTML elements as styled TEXT, INPUT, BUTTON, CHECKBOX, SELECT, SUBMIT and invoke them from the AutoConnect menu. These HTML elements can be added by Sketches using the AutoConnect API. Further it possible importing the custom Web pages declarations described with JSON which stored in PROGMEM, SPIFFS, or SD. ArduinoJson is required to use this feature. 2 AutoConnect can work with ArduinoJson both version 5 and version 6 .","title":"Required libraries"},{"location":"index.html#install-the-autoconnect","text":"Clone or download from the AutoConnect GitHub repository . When you select Download, you can import it to Arduino IDE immediately. After downloaded, the AutoConnect-master.zip file will be saved in your download folder. Then in the Arduino IDE, navigate to \"Sketch > Include Library\" . At the top of the drop down list, select the option to \"Add .ZIP Library...\" . Details for Arduino official page . Supported by Library manager. AutoConnect was added to the Arduino IDE library manager. It can be used with the PlatformIO library also. window.onload = function() { Gifffer(); }; Since AutoConnect v1.2.3, PageBuilder v1.5.0 later is required. \u21a9 Using the AutoConnect API natively allows you to Sketch custom Web pages without JSON. \u21a9","title":"Install the AutoConnect"},{"location":"acelements.html","text":"The elements for the custom Web pages \u00b6 Representative HTML elements for making the custom Web page are provided as AutoConnectElements. AutoConnectButton : Labeled action button AutoConnectCheckbox : Labeled checkbox AutoConnectElement : General tag AutoConnectFile : File uploader AutoConnectInput : Labeled text input box AutoConnectRadio : Labeled radio button AutoConnectRange : Labeled range slider AutoConnectSelect : Selection list AutoConnectStyle : Custom CSS code AutoConnectSubmit : Submit button AutoConnectText : Style attributed text Layout on a custom Web page \u00b6 AutoConnect will not actively be involved in the layout of custom Web pages generated from AutoConnectElements. However, each element has an attribute to arrange placement on a custom web page by horizontally or vertically. Custom CSS for a custom Web page \u00b6 All custom Web page styles are limited to the built-in unique CSS embedded in the library code. Direct modification of the CSS affects AutoConnect behavior. You can use dedicated elements to relatively safely modify the style of your custom Web page. The AutoConnectStyle will insert the raw CSS code into the style block in HTML of the custom Web page. Form and AutoConnectElements \u00b6 All AutoConnectElements placed on custom web pages will be contained into one form. Its form is fixed and created by AutoConnect. The form value (usually the text or checkbox you entered) is sent by AutoConnectSubmit using the POST method with HTTP. The post method sends the actual form data which is a query string whose contents are the name and value of AutoConnectElements. You can retrieve the value for the parameter with the Sketch from the query string with ESP8266WebServer::arg function or PageArgument class of the AutoConnect::on handler when the form is submitted. AutoConnectElement - A basic class of elements \u00b6 AutoConnectElement is a base class for other element classes and has common attributes for all elements. It can also be used as a variant of each element. The following items are attributes that AutoConnectElement has and are common to other elements. Sample AutoConnectElement element(\"element\", \"
    \"); On the page: Constructor \u00b6 AutoConnectElement( const char * name, const char * value, const ACPosterior_t post) name \u00b6 Each element has a name. The name is the String data type. You can identify each element by the name to access it with sketches. value \u00b6 The value is the string which is a source to generate an HTML code. Characteristics of Value vary depending on the element. The value of AutoConnectElement is native HTML code. A string of value is output as HTML as it is. post \u00b6 The post specifies a tag to add behind the HTML code generated from the element. Its purpose is to place elements on the custom Web page as intended by the user sketch. AutoConnect will not actively be involved in the layout of custom Web pages generated from AutoConnectElements. Each element follows behind the previous one, with the exception of some elements. You can use the post value to arrange vertically or horizontal when the elements do not have the intended position on the custom Web Page specifying the following enumeration value as ACPosterior_t type for the post . AC_Tag_None : No generate additional tags. AC_Tag_BR : Add a
    tag to the end of the element. AC_Tag_P : Include the element in the

    ~

    tag. AC_Tag_DIV : Include the element in the
    ~
    tag. The default interpretation of the post value is specific to each element. AutoConnectElements Default interpretation of the post value AutoConnectElement AC_Tag_None AutoConnectButton AC_Tag_None AutoConnectCheckBox AC_Tag_BR AutoConnectFile AC_Tag_BR AutoConnectInput AC_Tag_BR AutoConnectRadio AC_Tag_BR AutoConnectRange AC_Tag_BR AutoConnectSelect AC_Tag_BR AutoConnectSubmit AC_Tag_None AutoConnectText AC_Tag_None A placement posterior of AutoConnectText A placement posterior for AutoConnectText has a slightly peculiar specification. AutoConnectText element without the style attribute will be drained to HTML as a raw value and is accompanied by

    ,
    or

    tags according to the post enumeration values. If the style attribute is specified, the post enumeration value will be ignored and always be enclosed in the
    tag, and the style value will be inserted into style attribute of the
    tag. type \u00b6 The type indicates the type of the element and represented as the ACElement_t enumeration type in the Sketch. Since AutoConnectElement also acts as a variant of other elements, it can be applied to handle elements collectively. At that time, the type can be referred to by the typeOf() function. The following example changes the font color of all AutoConnectText elements of a custom Web page to gray. AutoConnectAux customPage; AutoConnectElementVT & elements = customPage.getElements(); for (AutoConnectElement & elm : elements) { if (elm.typeOf() == AC_Text) { AutoConnectText & text = reinterpret_cast < AutoConnectText &> (elm); text.style = \"color:gray;\" ; } } The enumerators for ACElement_t are as follows: AutoConnectButton: AC_Button AutoConnectCheckbox: AC_Checkbox AutoConnectElement: AC_Element AutoConnectFile: AC_File AutoConnectInput: AC_Input AutoConnectRadio: AC_Radio AutoConnectRange: AC_Range AutoConnectSelect: AC_Select AutoConnectStyle: AC_Style AutoConnectSubmit: AC_Submit AutoConnectText: AC_Text Uninitialized element: AC_Unknown Furthermore, to convert an entity that is not an AutoConnectElement to its native type, you must re-interpret that type with c++. Or, you can be coding the Sketch more easily with using the as function. AutoConnectAux customPage; AutoConnectElementVT & elements = customPage.getElements(); for (AutoConnectElement & elm : elements) { if (elm.type() == AC_Text) { AutoConnectText & text = customPage[elm.name].as < AutoConnectText > (); text.style = \"color:gray;\" ; // Or, it is also possible to write the code further reduced as follows. // customPage[elm.name].as().style = \"color:gray;\"; } } AutoConnectButton \u00b6 AutoConnectButton generates an HTML < button type = \"button\" > tag and locates a clickable button to a custom Web page. Currently AutoConnectButton corresponds only to name, value, an onclick attribute of HTML button tag. An onclick attribute is generated from an action member variable of the AutoConnectButton, which is mostly used with a JavaScript to activate a script. Sample AutoConnectButton button(\"button\", \"OK\", \"myFunction()\"); On the page: Constructor \u00b6 AutoConnectButton( const char * name, const char * value, const String & action, const ACPosterior_t post) name \u00b6 It is the name of the AutoConnectButton element and matches the name attribute of the button tag. It also becomes the parameter name of the query string when submitted. value \u00b6 It becomes a value of the value attribute of an HTML button tag. action \u00b6 action is String data type and is an onclick attribute fire on a mouse click on the element. It is mostly used with a JavaScript to activate a script. 1 For example, the following code defines a custom Web page that copies a content of Text1 to Text2 by clicking Button . const char * scCopyText = R\"( )\" ; ACInput(Text1, \"Text1\" ); ACInput(Text2, \"Text2\" ); ACButton(Button, \"COPY\" , \"CopyText()\" ); ACElement(TextCopy, scCopyText); post \u00b6 Specifies a tag to add behind the HTML code generated from the element. The default values is AC_Tag_None . AutoConnectCheckbox \u00b6 AutoConnectCheckbox generates an HTML < input type = \"checkbox\" > tag and a < label > tag. It places horizontally on a custom Web page by default. Sample AutoConnectCheckbox checkbox(\"checkbox\", \"uniqueapid\", \"Use APID unique\", false); On the page: Constructor \u00b6 AutoConnectCheckbox( const char * name, const char * value, const char * label, const bool checked, const ACPosition_t labelPosition, const ACPosterior_t post) name \u00b6 It is the name of the AutoConnectCheckbox element and matches the name attribute of the input tag. It also becomes the parameter name of the query string when submitted. value \u00b6 It becomes a value of the value attribute of an HTML < input type = \"checkbox\" > tag. label \u00b6 A label is an optional string. A label is always arranged on the right side of the checkbox. Specification of a label will generate an HTML