Skip to content

Latest commit

 

History

History
1021 lines (975 loc) · 43.2 KB

README.md

File metadata and controls

1021 lines (975 loc) · 43.2 KB
Raw

homebridge-mi-aqara (repair homebridge-mi-aqara mac 04c...)

npm version npm version npm version npm version npm version npm version

homebridge plugin for XiaoMi Aqara plugin.

Thanks for nfarina(the author of homebridge), snOOrz(the author of homebridge-aqara), licuhui, 攀旺智能, magaHH, isundaylee, ileler, myriky, all other developer and testers.

Note: I have only a part of these devices, so some devices don't have tested. If you find bugs, please submit them to issues or QQ Group: 107927710.

Note: According to aqara local network protocol use UDP port 9898, please notice the relevant configuration of firewall.

Note: 0.5.x update to 0.6.x must be clear register accessories and update configuration file content.

Note: About AcPartner, This project only provides gateway functionality. If you want the use air conditioning function, please refer to the project for homebridge-mi-acPartner.

This repository contains the Aqara plugin for homebridge.
Aqara is a ZigBee gateway with a few sensors.

Supported Devices

Device Name Protocol Model Value
1 Gateway(网关) gateway
gateway.v3
2 ContactSensor(门磁感应) magnet
sensor_magnet
3 MotionSensor(人体感应) motion
4 Button(按钮) switch
sensor_switch
5 TemperatureAndHumiditySensor(温度湿度传感器) sensor_ht
6 SingleSwitch(单按钮墙壁开关) ctrl_neutral1
7 DuplexSwitch(双按钮墙壁开关) ctrl_neutral2
8 SingleSwitchLN(单按钮墙壁开关零火版) ctrl_ln1
ctrl_ln1.aq1
9 DuplexSwitchLN(双按钮墙壁开关零火版) ctrl_ln2
ctrl_ln2.aq1
10 SingleButton86(86型无线单按钮开关) 86sw1
sensor_86sw1.aq1
sensor_86sw1
11 DuplexButton86(86型无线双按钮开关) 86sw2
sensor_86sw2.aq1
sensor_86sw2
12 PlugBase(插座) plug
13 PlugBase86(86型墙壁插座) 86plug
ctrl_86plug
ctrl_86plug.aq1
14 MagicSquare(魔方) cube
sensor_cube
sensor_cube.aqgl01
15 SmokeDetector(烟雾报警器) smoke
sensor_smoke
16 NatgasDetector(天然气报警器) natgas
sensor_natgas
17 ElectricCurtain(电动窗帘) curtain
18 ContactSensor2(门磁感应第二代) sensor_magnet.aq2
19 MotionSensor2(人体感应第二代) sensor_motion.aq2
20 Button2(按钮第二代) sensor_switch.aq2
21 TemperatureAndHumiditySensor2(温度湿度传感器第二代) weather.v1
weather
22 WaterDetector(水浸传感器) sensor_wleak.aq1
23 Lock(门锁) lock.aq1
24 AcPartner(空调伴侣升级版) acpartner.v3
25 Button3(按钮第二代升级版) sensor_switch.aq3
26 DuplexButton862(86型无线双按钮开关升级版) remote.b286acn01
27 VibrationSensor(动静贴) vibration

Pre-Requirements

  1. Make sure your IOS version is ios11 or later.
  2. Make sure you have gateway v2 or acpartner v3. gateway v1 has limited space so can't support this feature.
  3. Update gateway firmware to 1.4.1_155.0143(gateway v2), 1.4.1_148.019(acpartner v3) or later.

Installation

  1. Install HomeBridge, please follow it's README.
    If you are using Raspberry Pi, please read Running-HomeBridge-on-a-Raspberry-Pi.
  2. Make sure you can see HomeBridge in your iOS devices, if not, please go back to step 1.
  3. Download homebridge-mi-aqara to your HomeBridge path or installation through NPM:
npm install -g homebridge-mi-aqara

Configuration

Name Required Value Type Description Value Example
1 platform True String It must be 'MiAqaraPlatform'
2 gateways True Object set gateway information. { "6409802da3b3": "02i44k56zrgg578b" }
3 bindAddress False String specified network. "10.0.1.1"
4 defaultValue False Object set device default value.
5 manage False Object open manage and manage configs. { "port": 11128, "password": "107927710" }
6 mqtt False Object open mqtt and mqtt configs. { "username": "mqtt", "password": "107927710" }

For more information about config, Please refer to file sampleConfig.json.

gateways configuration

Open aqara gateway's settings, enable local network protocol.
Please follow the steps in this thread: http://wiki.yinhh.com/Wiki.jsp?page=Homebridge-mi-aqara or http://bbs.xiaomi.cn/t-13198850. It's in Chinese so you might need a translator to read it.
To control the devices, put gateway's MAC address (lower case without colon) and password (keep original and case sensitive) to ~/.homebridge/config.json.

Warning: gateway's MAC address (lower case without colon) and password (keep original and case sensitive).
Warning: gateway's MAC address (lower case without colon) and password (keep original and case sensitive).
Warning: gateway's MAC address (lower case without colon) and password (keep original and case sensitive).
Important things are to be repeated for 3 times.

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b"
        }
    }]
}

If you have more than one gateways, fill them in right order, like below.

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        }
    }]
}

Here is a way to search for gateways instead of multicast, because of some friends do not respond to information from gateway in their network environment.
That is to say, we can config the IP address of the gateway to replace search gateway by multicast.

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": {
                "password": "02i44k56zrgg578b",
                "ip": "10.3.3.1"
            },
            "f0b4299a5b2b": {
                "password": "2F92E7DA90C66B86",
                "ip": "10.3.3.2"
            },
            "f0b4299a77dd": {
                "password": "syu3oasva3uqd5qd",
                "ip": "10.3.3.3"
            }
        }
    }]
}

It can also be mixed config, but without full configuration of ip, multicast packets will still be sent to search for other gateways which do not config ip.

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": {
                "password": "2F92E7DA90C66B86",
                "ip": "10.3.3.2"
            },
            "f0b4299a77dd": {
                "password": "syu3oasva3uqd5qd",
                "ip": "10.3.3.3"
            }
        }
    }]
}

bindAddress configuration

If your device(which running homebridge) has multiple network, please add the bindAddress configuration item to decide to listen which network, like below.

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "bindAddress": "10.0.1.1",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        }
    }]
}

defaultValue configuration

If you want to specify the default value, such as specify the name of the accessory, hide the accessory, any other configs. You can add a defaultValue mapping table to your config.json.
The config supported are as follows:

Name Value Type Description Default Value Recommended Value Value Example
1 name String set accessory name. DeviceAccessoryType_device SID last four bits "living room temperature"
2 serviceType String set accessory type for Switch or Lightbulb.
Currently only supported: SingleSwitch, DuplexSwitch, SingleSwitchLN, DuplexSwitchLN.		 "Switch" "Switch" "Lightbulb"
3 disable Boolean disable accessory false the accessories that do not need to be set to true, such as virtual press. true
4 syncValue Boolean accessory will synchronization value when homebridge call the get function, if it's true. false fasle false
5 ignoreWriteResult Boolean if set to true, the result of control is not detected. true If your network is awful, it's recommended to be set true. false
6 disableNoResponse Boolean use jump back the last value to replace show NoResponse, you can set it true. false false true

The rules are as follows:

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        },
        "defaultValue": {
            "device1 sid": {
                "DeviceAccessoryType1": {
                    "config1": "config1 value"
                }
            },
            "device2 sid": {
                "DeviceAccessoryType1": {
                    "config1": "config1 value"
                    "config2": "config2 value"
                },
                "DeviceAccessoryType2": {
                    "config1": "config1 value"
                }
            }
        }
    }]
}

examples:

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        },
        "defaultValue": {
            "158d0001000001": {
                "ContactSensor_ContactSensor": {
                    "name": "entrance door"
                }
            },
            "158d0001000002": {
                "MotionSensor2_MotionSensor": {
                    "name": "study room motion sensor"
                },
                "MotionSensor2_LightSensor": {
                    "name": "study room light sensor"
                }
            }
        }
    }]
}

The rules of A DeviceAccessoryType:

DeviceName_HomeBridgeAccessoryType(_ExtraMessage)

detail:

Device Name DeviceAccessoryType
1 Gateway(网关) Gateway_Lightbulb
Gateway_LightSensor
Gateway_Switch_JoinPermission
2 ContactSensor(门磁感应) ContactSensor_ContactSensor
3 MotionSensor(人体感应) MotionSensor_MotionSensor
4 Button(按钮) Button_StatelessProgrammableSwitch
Button_Switch_VirtualSinglePress
Button_Switch_VirtualDoublePress
5 TemperatureAndHumiditySensor(温度湿度传感器) TemperatureAndHumiditySensor_TemperatureSensor
TemperatureAndHumiditySensor_HumiditySensor
6 SingleSwitch(单按钮墙壁开关) SingleSwitch_Switch
7 DuplexSwitch(双按钮墙壁开关) DuplexSwitch_Switch_Left
DuplexSwitch_Switch_Right
8 SingleSwitchLN(单按钮墙壁开关零火版) SingleSwitchLN_Switch
9 DuplexSwitchLN(双按钮墙壁开关零火版) DuplexSwitchLN_Switch_Left
DuplexSwitchLN_Switch_Right
10 SingleButton86(86型无线单按钮开关) SingleButton86_StatelessProgrammableSwitch
SingleButton86_Switch_VirtualSinglePress
11 DuplexButton86(86型无线双按钮开关) DuplexButton86_StatelessProgrammableSwitch_Left
DuplexButton86_Switch_VirtualSinglePress_Left
DuplexButton86_StatelessProgrammableSwitch_Right
DuplexButton86_Switch_VirtualSinglePress_Right
DuplexButton86_StatelessProgrammableSwitch_Both
DuplexButton86_Switch_VirtualSinglePress_Both
12 PlugBase(插座) PlugBase_Outlet
13 PlugBase86(86型墙壁插座) PlugBase86_Outlet
14 MagicSquare(魔方) MagicSquare_StatelessProgrammableSwitch_Flip90
MagicSquare_StatelessProgrammableSwitch_Flip180
MagicSquare_StatelessProgrammableSwitch_Move
MagicSquare_StatelessProgrammableSwitch_TapTwice
MagicSquare_StatelessProgrammableSwitch_ShakeAir
MagicSquare_StatelessProgrammableSwitch_Rotate
MagicSquare_Switch_VirtualFlip90
MagicSquare_Switch_VirtualFlip180
MagicSquare_Switch_VirtualMove
MagicSquare_Switch_VirtualTapTwice
MagicSquare_Switch_VirtualShakeAir
15 SmokeDetector(烟雾报警器) SmokeDetector_SmokeSensor
16 NatgasDetector(天然气报警器) NatgasDetector_SmokeSensor
17 ElectricCurtain(电动窗帘) ElectricCurtain_WindowCovering
18 ContactSensor2(门磁感应第二代) ContactSensor2_ContactSensor
19 MotionSensor2(人体感应第二代) MotionSensor2_MotionSensor
MotionSensor2_LightSensor
20 Button2(按钮第二代) Button2_StatelessProgrammableSwitch
Button2_Switch_VirtualSinglePress
Button2_Switch_VirtualDoublePress
21 TemperatureAndHumiditySensor2(温度湿度传感器第二代) TemperatureAndHumiditySensor2_TemperatureSensor
TemperatureAndHumiditySensor2_HumiditySensor
22 WaterDetector(水浸传感器) WaterDetector_LeakSensor
23 Lock(门锁) Lock_MotionSensor
Lock_MotionSensor_{UserID}
24 AcPartner(空调伴侣升级版) AcPartner_LightSensor
AcPartner_Switch_JoinPermission
25 Button3(按钮第二代升级版) Button3_StatelessProgrammableSwitch
Button3_StatelessProgrammableSwitch_Shake
Button3_Switch_VirtualSinglePress
Button3_Switch_VirtualDoublePress
Button3_Switch_VirtualShare
26 DuplexButton862(86型无线双按钮开关升级版) DuplexButton862_StatelessProgrammableSwitch_Left
DuplexButton862_Switch_VirtualSinglePress_Left
DuplexButton862_Switch_VirtualDoublePress_Left
DuplexButton862_StatelessProgrammableSwitch_Right
DuplexButton862_Switch_VirtualSinglePress_Right
DuplexButton862_Switch_VirtualDoublePress_Right
DuplexButton862_StatelessProgrammableSwitch_Both
DuplexButton862_Switch_VirtualSinglePress_Both
27 VibrationSensor(动静贴) VibrationSensor_MotionSensor_Vibrate
VibrationSensor_MotionSensor_Tilt
VibrationSensor_MotionSensor_FreeFall

About Global:
Some similar configurations and repeated multiple copies are boring things. So I provided a global writing method.
The following two methods of writing are equivalent:

....
"158d0001000008": {
    "DuplexSwitch_Switch_Left": {
        "name": "master bedroom room light",
        "serviceType": "Lightbulb"
    },
    "DuplexSwitch_Switch_Right": {
        "name": "study room light",
        "serviceType": "Lightbulb"
    }
}
....

....
"158d0001000008": {
    "Global": {
        "serviceType": "Lightbulb"
    },
    "DuplexSwitch_Switch_Left": {
        "name": "master bedroom room light"
    },
    "DuplexSwitch_Switch_Right": {
        "name": "study room light"
    }
}
....

In the same way, the following two kinds of writing are alse equivalent:

....
"158d0001000003": {
    "Button_StatelessProgrammableSwitch": {
        "name": "living room button"
    },
    "Button_Switch_VirtualSinglePress": {
        "name": "living room button virtual single press",
        "disable": true
    },
    "Button_Switch_VirtualDoublePress": {
        "name": "living room button virtual double press",
        "disable": true
    }
}
....

....
"158d0001000003": {
    "Global": {
        "disable": true 
    },
    "Button_StatelessProgrammableSwitch": {
        "name": "living room button",
        "disable": false
    },
    "Button_Switch_VirtualSinglePress": {
        "name": "living room button virtual single press"
    },
    "Button_Switch_VirtualDoublePress": {
        "name": "living room button virtual double press"
    }
}
....

It also provides a higher level of way, the following three kinds of writing are alse equivalent:

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        },
        "defaultValue": {
            "158d0001000007": {
                "SingleSwitch_Switch": {
                    "name": "living room light",
                    "ignoreWriteResult": true
                }
            },
            "158d0001000008": {
                "DuplexSwitch_Switch_Left": {
                    "name": "master bedroom room light",
                    "ignoreWriteResult": true
                },
                "DuplexSwitch_Switch_Right": {
                    "name": "study room light",
                    "ignoreWriteResult": true
                }
            }
        }
    }]
}

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        },
        "defaultValue": {
            "158d0001000007": {
                "SingleSwitch_Switch": {
                    "name": "living room light",
                    "ignoreWriteResult": true
                }
            },
            "158d0001000008": {
                "Global": {
                    "ignoreWriteResult": true
                },
                "DuplexSwitch_Switch_Left": {
                    "name": "master bedroom room light"
                },
                "DuplexSwitch_Switch_Right": {
                    "name": "study room light"
                }
            }
        }
    }]
}

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        },
        "defaultValue": {
            "Global": {
                "ignoreWriteResult": true
            },
            "158d0001000007": {
                "SingleSwitch_Switch": {
                    "name": "living room light"
                }
            },
            "158d0001000008": {
                "DuplexSwitch_Switch_Left": {
                    "name": "master bedroom room light"
                },
                "DuplexSwitch_Switch_Right": {
                    "name": "study room light"
                }
            }
        }
    }]
}

defaultValue name configuration

If you want to specify the default name of the device, add a mapping table to your config.json like this.

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        },
        "defaultValue": {
            "158d0001000001": {
                "ContactSensor_ContactSensor": {
                    "name": "entrance door"
                }
            },
            "158d0001000002": {
                "MotionSensor2_MotionSensor": {
                    "name": "study room motion sensor"
                },
                "MotionSensor2_LightSensor": {
                    "name": "study room light sensor"
                }
            },
            "158d0001000004": {
                "TemperatureAndHumiditySensor_TemperatureSensor": {
                    "name": "living room temperature"
                },
                "TemperatureAndHumiditySensor_HumiditySensor": {
                    "name": "living room humidity"
                }
            }
        }
    }]
}

defaultValue serviceType configuration

If you like to use Light Bulb type for Light Switch to make grandma Siri happy, like snOOrz, you can set the following in the config.
Currently only supported: SingleSwitch, DuplexSwitch, SingleSwitchLN, DuplexSwitchLN.
If you changed serviceType config, Please clear register accessories.

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        },
        "defaultValue": {
            "158d0001000007": {
                "SingleSwitch_Switch": {
                    "name": "living room light",
                    "serviceType": "Lightbulb"
                }
            },
            "158d0001000008": {
                "Global": {
                    "serviceType": "Lightbulb"
                },
                "DuplexSwitch_Switch_Left": {
                    "name": "master bedroom room light"
                },
                "DuplexSwitch_Switch_Right": {
                    "name": "study room light"
                }
            },
            "158d10010000001": {
                "DuplexSwitch_Switch_Left": {
                    "name": "master bedroom room light",
                    "serviceType": "Lightbulb"
                },
                "DuplexSwitch_Switch_Right": {
                    "name": "study room light"
                }
            }
        }
    }]
}

defaultValue disable configuration

If you want to disable accessories, you can add disable attribute to config.

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        },
        "defaultValue": {
            "158d0001000007": {
                "SingleSwitch_Switch": {
                    "name": "living room light",
                    "serviceType": "Lightbulb"
                }
            },
            "158d0001000008": {
                "DuplexSwitch_Switch_Left": {
                    "name": "master bedroom room light",
                    "serviceType": "Lightbulb",
                    "disable": false
                },
                "DuplexSwitch_Switch_Right": {
                    "name": "study room light",
                    "serviceType": "Lightbulb",
                    "disable": true
                }
            },
            "158d0001000004": {
                "TemperatureAndHumiditySensor_TemperatureSensor": {
                    "name": "living room temperature"
                },
                "TemperatureAndHumiditySensor_HumiditySensor": {
                    "name": "living room humidity",
                    "disable": true
                }
            },
            "158d0001000012": {
                "Global": {
                    "disable": true
                }
            },
            "158d0001000015": {
                "Global": {
                    "disable": true
                },
                "MagicSquare_StatelessProgrammableSwitch_Flip90": {
                    "name": "study room magic square flip90",
                    "disable": false
                }
            }
        }
    }]
}

defaultValue syncValue configuration

If you want to accessory value exact, you can set syncValue is true.
when syncValue is true, accessory will synchronization value when homebridge call the get function. At the same time, it's going to waste more time.
when syncValue is false, accessory will use the device last reported value. It's going to respond quickly.

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        },
        "defaultValue": {
            "158d0001000007": {
                "SingleSwitch_Switch": {
                    "name": "living room light",
                    "serviceType": "Lightbulb",
                    "syncValue": true
                }
            }
        }
    }]
}

defaultValue ignoreWriteResult configuration

If you control device always timeout, but in fact it's already working.
you can set ignoreWriteResult is true.

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        },
        "defaultValue": {
            "Global": {
                "ignoreWriteResult": true
            },
            "158d0001000007": {
                "SingleSwitch_Switch": {
                    "name": "living room light",
                    "serviceType": "Lightbulb",
                    "syncValue": true
                }
            }
        }
    }]
}

defaultValue disableNoResponse configuration

If you don't like "No Response", you can set disableNoResponse is true.
When the device is no pesponse and disableNoResponse is true, the accessory value will auto jump back to before the control.

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        },
        "defaultValue": {
            "Global": {
                "disableNoResponse": true
            },
            "158d0001000007": {
                "SingleSwitch_Switch": {
                    "name": "living room light",
                    "serviceType": "Lightbulb",
                    "syncValue": true
                }
            }
        }
    }]
}

defaultValue other configuration

If you want to use Aqara lock,you need add some configuration like this:

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        },
        "defaultValue": {
            "LockDeviceID": {
                "Lock_MotionSensor": {
                    "name": "door"
                },
                "Lock_MotionSensor_{User1ID}": {
                    "name": "User1Name"
                },
                "Lock_MotionSensor_{User2ID}": {
                    "name": "User2Name"
                }
            }
        }
    }]
}

{UserID} is user identification from lock.
The value can get from Aqara Lock Plugin in MIHOME APP. The user ID contains the ID type.
The integer value obtained by dividing the user ID by 65536 is the ID type. The ID type value is:
1 fingerprint
2 password
3 proximity card
5 check-in password
Example:

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        },
        "defaultValue": {
            "158d0001dd0289": {
                "Lock_MotionSensor": {
                    "name": "door"
                },
                "Lock_MotionSensor_65536": {
                    "name": "Administrator"
                },
                "Lock_MotionSensor_65537": {
                    "name": "Finger"
                },
                "Lock_MotionSensor_196608": {
                    "name": "Card"
                }
            }
        }
    }]
}

manage configuration

Before version 0.7.x, the addition and deletion of accessories are automatic. The rules are as follows:
find new accessories every one hour, delete accessories which did not receive heartbeat over 7 days.
Obviously, this is not easy to use. So version 0.7.0 added http web manage(if you do not set manage item, then http web manage is close.). config add these:

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "manage": {
            "port": 11128,
            "password": "107927710"
        },
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        }
    }]
}

Config items description:

Name Required Value Type Description Recommended Value Value Example
1 port True Integer set manage web port. 11128 11128
2 password True String set manage web password. "107927710" "107927710"

mqtt configuration

config add these:

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "mqtt": {
        },
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        }
    }]
}

Or

{
    "platforms": [{
        "platform": "MiAqaraPlatform",
        "mqtt": {
            "server": "10.0.1.1",
            "username": "mqtt",
            "password": "mqtt"
        },
        "gateways": {
            "6409802da3b3": "02i44k56zrgg578b",
            "f0b4299a5b2b": "2F92E7DA90C66B86",
            "f0b4299a77dd": "syu3oasva3uqd5qd"
        }
    }]
}

Config items description:

Name Required Value Type Description Default Value Value Example
1 server False String set mqtt server ip. "127.0.0.1" "10.0.1.1"
2 username False String set mqtt username. "mqtt" "mqtt"
3 password False String set mqtt password. "mqtt" "mqtt"

plugin will send these topic:

  1. /homebridge-mi-aqara: all message.
  2. /homebridge-mi-aqara/{cmd}: all message after {cmd} filter.
  3. /homebridge-mi-aqara/{sid}: all message after {sid} filter.
  4. /homebridge-mi-aqara/{sid}/{cmd}: all message after {sid} and {cmd} filter.

{cmd} is iam/get_id_list_ack/discovery_rsp/write_ack/write_rsp/read_ack/read_rsp/report.
{sid} is device's sid.

plugin will accept these topic:

  1. /homebridge-mi-aqara/write: write device.
    about write key, send the ${key} is okay, this plugin will automatically calculate the key value, for example:
    {"cmd": "write", "model": "ctrl_neutral2", "sid": "158d00014a1bcd", "params": [{"channel_0": "off"}], "key": "${key}"}

Some explanation

Button/Button2 StatelessProgrammableSwitch support SinglePress, DoublePress, LongPress.
SingleButton86/DuplexButton86(Left, Right, Both) StatelessProgrammableSwitch only support SinglePress.
MagicSquare(Flip90, Flip180, Move, TapTwice, ShakeAir, Rotate) StatelessProgrammableSwitch only support SinglePress.

Run it

homebridge -D

Clear register accessories

cd ~/.homebridge/accessories/
mv cachedAccessories cachedAccessories_`date '+%Y%m%d_%H%M%S'`.bak
echo [] > cachedAccessories

Version Logs

0.8.0 (2018-11-04)

  1. add mqtt support.

0.7.3 (2018-10-27)

  1. add support for VibrationSensor.

0.7.2 (2018-10-09)

  1. fixed bug that move 'sensor_switch' type form Button2 to Button.
  2. add support for Button3(sensor_switch.aq3).
  3. add support for DuplexButton862(remote.b286acn01).

0.7.1 (2018-09-14)

  1. fixed bug that delete orphan accessory list item fail in http web manage.

0.7.0 (2018-09-13)

  1. fixed bug that DuplexSwitchLN right switch not work.
  2. fixed bug that sometimes Gateway, AcPartner and MotionSensor2 light senor no response.
  3. fixed bug that MagicSquare Rotate StatelessProgrammableSwitch not work.
  4. fixed bug that crash when auto remove accessory.
  5. add http web manage.

0.6.9 (2018-06-23)

  1. fixed bug that config 'defaultValue' can not support: Button2, MotionSensor2, ContactSensor2, PlugBase86.
  2. fixed bug that MotionSensor not work in aqara local network protocol 2.x version.
  3. support config gateway ip feature.

0.6.9_beta (2018-03-26)

  1. optimized some of the basic code to facilitate the subsequent support of new hardware.
  2. supports aqara local network protocol 2.x version.
  3. add support for lock device.
  4. add support for acpartner accessory.

0.6.8 (2018-01-21)

  1. fixed bug that sometimes DuplexSwitchLN and DuplexSwitch no response.
  2. fixed bug that it still show battery low power after replacing the battery.
  3. fixed bug that TemperatureAndHumiditySensor and TemperatureAndHumiditySensor2 temperature sensor accessory can't show the negative number.
  4. remove a duplicated function.
  5. add the choice bindAddress feature.

0.6.7 (2017-12-10)

  1. optimizing log content.

0.6.6 (2017-12-10)

  1. fixed bug that sometimes DuplexSwitchLN and DuplexSwitch no response.
  2. fixed bug that sometimes Gateway and MotionSensor2 light senor no response.
  3. fixed bug that global config not work in some cases.
  4. add setting "ignoreWriteResult" feature.
  5. remove the SingleButton86, DuplexButton86, MagicSquare redundant event action.

0.6.5 (2017-10-31)

  1. optimizing log content.
  2. optimizing read/write device response timeout rules.
  3. optimizing read/write device no response rules.
  4. add gateway join permission switch accessory.
  5. add setting disable "No Response" feature.

0.6.4 (2017-10-27)

  1. add virtual switch accessory can trigger homekit click events.
  2. optimizing log content.
  3. optimizing HomeBridge startup read device info algorithm.

0.6.3 (2017-10-26)

  1. fixed bug that ElectricCurtain can't work.
  2. remove synchronization value when homebridge call the get function(only electrify device) and add setting synchronization value feature.
  3. add config Global mode.

0.6.2 (2017-10-25)

  1. fixed bug that MotionSensor motion sonser accessory status is error.
  2. fixed bug that MotionSensor2 motion sonser accessory status is error.

0.6.1 (2017-10-23)

  1. fixed bug that MotionSensor2 light sonser accessory value is error.

0.6.0 (2017-10-22)

  1. refactoring code.
  2. add feedback when control accessory.
  3. synchronization value when homebridge call the get function. (only electrify device)
  4. optimizing program structure, send fewer packets.
  5. optimizing config item name, easier to read.
  6. fixed some bug.
  7. add Button(single press, double press) virtual switch accessory.
  8. add Button2(single press, double press) virtual switch accessory.
  9. add SingleButton86(single press) virtual switch accessory.
  10. add DuplexButton86(left button single press, right button single press, both press) virtual switch accessory.
  11. add MagicSquare(flip90, flip180, move, tapTwice, shakeAir) virtual switch accessory.

0.5.3 (2017-08-26)

  1. optimized code.

0.5.2 (2017-08-23)

  1. fixed bug that gateway light brightness is 100 when it light up.

0.5.1 (2017-08-14)

  1. fixed bug that natgas detector is not alarm.

0.5.0 (2017-08-13)

  1. add support for water detector accessory.
  2. fixed bug that natgas detector is not alarm.
  3. fixed bug that smoke detector is not alarm.

0.4.4 (2017-08-09)

  1. add log content that show plugin version when homebridge started.
  2. fixed bug that run homebridge error there is no MiAqaraPlatform in config.json file.

0.4.3 (2017-08-01)

  1. fixed bug that gateway light sensor not support when value is 0;
  2. fixed bug that motion sensor version 2 light sensor not support when value is 0;

0.4.2 (2017-07-29)

  1. adjustment gateway light sensor value(subtract 279).
  2. delete PlugBase, PlugBase86, SingleSwitch, DuplexSwitch, SingleSwitchLN, DuplexSwitchLN battery information.
  3. add motion sensor version 2 light sensor battery information.
  4. add setting accessory disable feature.
  5. fixed bug that electric curtain can't work, but there is no current operation state information now.

0.4.1 (2017-07-26)

  1. code collation.

0.4.0 (2017-07-26)

  1. add support for electric curtain accessory.
  2. add support for contact sensor version 2 accessory.
  3. add support for motion sensor version 2 accessory.
  4. add support for button version 2 accessory.
  5. add support for temperature and humidity sensor version 2 accessory.
  6. optimize log content.
  7. add setting default name feature.
  8. add setting default service type feature.
  9. fixed motion sensor bug that wrong trigger when homebridge start.
    10.adjustment gateway light sensor value(subtract 300).

0.3.3 (2017-06-16)

  1. add single button 86 long press event.
  2. add duplex button 86 long press event.
  3. changed button click event value from Characteristic.ProgrammableSwitchEvent.CLICK back to Characteristic.ProgrammableSwitchEvent.SINGLE_PRESS.
  4. changed single button 86 click event value from Characteristic.ProgrammableSwitchEvent.CLICK back to Characteristic.ProgrammableSwitchEvent.SINGLE_PRESS.
  5. changed duplex button 86 click event value from Characteristic.ProgrammableSwitchEvent.CLICK back to Characteristic.ProgrammableSwitchEvent.SINGLE_PRESS.

0.3.2 (2017-06-15)

  1. fixed bug that duplex switch LN charging state.
  2. fixed bug that single switch LN charging state.
  3. fixed bug that single button 86 charging state.
  4. changed button click event value from Characteristic.ProgrammableSwitchEvent.SINGLE_PRESS to Characteristic.ProgrammableSwitchEvent.CLICK.
  5. changed single button 86 click event value from Characteristic.ProgrammableSwitchEvent.SINGLE_PRESS to Characteristic.ProgrammableSwitchEvent.CLICK.
  6. changed duplex button 86 click event value from Characteristic.ProgrammableSwitchEvent.SINGLE_PRESS to Characteristic.ProgrammableSwitchEvent.CLICK.
  7. fixed bug that natgas detector is not alarm.
  8. fixed bug that smoke detector is not alarm.

0.3.1 (2017-06-14)

  1. code collation.

0.3.0 (2017-06-14)

  1. add support for single switch LN accessory.
  2. add support for duplex switch LN accessory.
  3. add support for plug base 86 accessory.
  4. add support for smoke detector accessory.
  5. add support for natgas detector accessory.

0.2.1 (2017-06-14)

  1. change accessory registration mechanism, fixed bug that new accessory can't correlate associated with gateway.

0.2.0 (2017-06-14)

  1. add support for duplex switch accessory.
  2. add support for single button 86 accessory.
  3. add support for duplex button 86 accessory.

0.1.0 (2017-06-13)

  1. add support for plug base accessory.
  2. add support for magic square accessory.

0.0.6 (2017-06-12)

  1. add some logs.

0.0.5 (2017-06-08)

  1. fixed bug.

0.0.4 (2017-06-08)

  1. fixed bug.

0.0.3 (2017-06-08)

  1. add support for gateway accessory: light sensor, hue light.

0.0.2 (2017-06-07)

  1. add support for single switch accessory.

0.0.1 (2017-06-07)

  1. supported contact sensor accessory.
  2. supported motion sensor accessory.
  3. supported button accessory.
  4. supported temperature and humidity sensor accessory.