Thermostats turn off, and never on again

[yesnomaybewtf]

Following situation: my BT (3 grouped Max Thermostats) is set to 20 degree.
Ive got a Netatmo as indoor temperature sensor.
When the desired temperature is reached, the BT sets the Max Thermostats to a lower temperature, or turns them off.
But, when the indoor temperature ist falling below 20 degress (18 degrees today for example) the real thermostats doesnt turn on again.
Maybe i did not understand the functionality correctly, but i thought the target temperature, set on the BT, should always be reached.

[yesnomaybewtf]

Here we go: Room Temp is 18.8 Degrees, BT ist set to 19 Degrees.
Shouldnt the BT start heating again?

[SP2FET]

I have the same issue - temperature dropped and then some time, the BT is still turned off:

[yesnomaybewtf]

Installed the beta yesterday,no issues actually.

[SP2FET]

I also installed beta, and that's the result:

I'll try to reinstall, maybe it will help somehow

[yesnomaybewtf]

What Thermostats do you use?Got Max Thermostats and a Max Cube with CUL Firmware.Connected via Homegear and the Homematic Integration to HA.Von meinem iPhone gesendetAm 19.12.2024 um 15:40 schrieb Bartosz Cichocki ***@***.***>: I also installed beta, and that's the result: image.png (view on web) I'll try to reinstall, maybe it will help somehow —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>

[SP2FET]

I'm using MOES Zigbee TRVs (TS0601/_TZE204_qyr2m29i) via Zigbee2MQTT