Is it also controlling thermostat position?

[zer0isdoing]

Is this plug-in also controlling thermostat's position or is it just providing extra sensor informations(like remote temperature, window sensor etc.)? I would not expect it but I could not be sure(because of this [1]) and could not find answer for that.
[1]: Tolerance This is an optional field. It helps prevent the thermostat from turning on an off too often. Here is an example how it works: If you set the target temperature to 20.0 and the tolerance to 0.3 for example. Then BT will heat to 20.0 and then go to idle until the temperature drops again to 19.7 and then it will heat again to 20.0.

I have Bosch TRV and use Bosch's PID, I just want to feed remote temperature sensor information to it. I am using Zigbee2MQTT.

[folfy]

Use the "no calibration" mode of BT, and it will not affect the control behaviour of the TRV (besides turning it off if the window is opened, or reaching the turn-off outdoor temperature, depending on what sensors / values you configure in BT).