Skip to content

Latest commit

 

History

History
79 lines (72 loc) · 4.27 KB

README.md

File metadata and controls

79 lines (72 loc) · 4.27 KB
Raw

What is RETC

RETC is a custom server application with a dll shim for clients, designed to be the middleman between the Razer Chroma SDK and various output sdks. I believe in performance so RETC is designed to run with the smallest amount of overhead possible.

Installation:

Automatic

Follow the guide how to install RETC.
tl:dr Just download the latest installer executable from here and follow the installation steps. In both cases you should have working effects afterwards, if not proceed to the troubleshooting section.

If you want to add a custom application see Patching application

Manual

Patching application

Copy both RzChromaSDK.dll and RzChromaSDK64.dll into the folder of the Application you want to use e.g C:\Program Files\Overwatch.

WARNING: Never move these dlls to a global dll loading path like C:\Windows\System32 or the retc-server.exe directory itself otherwise you will end up crashing the application.

Preparing files

Download the latest release from github or compile it yourself. Download and extract the corsair cue sdk from the official corsair download page Create a new folder called retc-server this will be the place where you start RETC from.

The following steps depend on your systems architecture

i.e whether you are using a 64bit (x64, x86_64, AMD64, etc.) or 32bit (x86, i386, etc) system.

64 Bit

Put the extracted CUESDK\bin\amd64\CUESDK.x64_2015.dll into the retc-server folder you just created. Copy the retc-rpc-server-64.exe from the github download into the same folder.

32 Bit

Put the extracted CUESDK\bin\i386\CUESDK_2015.dll into the retc-server folder you just created. Copy the retc-rpc-server.exe from the github download into the same folder.

Usage

Choose one of the following sections depending on how you installed RETC.

Automatic installation

The service should start right after the installation is done and should continue doing so on every boot. However if thats not the case check your services within windows and make sure you find a RETC service thats set to autostart.

Manual installation

Before you start any games run either retc-rpc-server.exe or retc-rpc-server-64.exe, depending on the system architecture you have, and leave the console window open.

Supported Output SDKs:

Only 1 output SDK is supported per device type (Keyboard, etc.).

Corsair

Only the effect types in the following list are supported.

Keyboards:
    CHROMA_NONE, CHROMA_STATIC, CHROMA_CUSTOM, CHROMA_CUSTOM_KEY
Mice:
    CHROMA_NONE, CHROMA_STATIC, CHROMA_CUSTOM, CHROMA_CUSTOM2
Headsets:
    CHROMA_NONE, CHROMA_STATIC, CHROMA_CUSTOM
Mousepads: (since sdk version 2015)
    CHROMA_NONE, CHROMA_STATIC, CHROMA_CUSTOM

Razer

The razer sdk implementation is just forwarding to the real and installed sdk if available.

Which applications are supported?

Pretty much every application that uses the Razer Chroma SDK through the supplied dlls is supported. Keep in mind that some (now deprecated) effects might not work correctly in some output sdks.

Troubleshooting:

Corsair Output SDK

Did you start the Corsair Utility Engine ?
Did you enable the SDK in Corsair CUE ?

cue-sdk-settings

[error] [SDKLoader::load] LoadLibraryA(CUESDK[.x64_]2015.dll) failed with code 126 ?

Download the latest VC++2015 x86 and x64 redistributable from here

Razer Output SDK

Make sure Razer Synapse is installed properly and allows SDK access.

General

Take a look at the server.log it can help with your problems.

Service

Restart the RETC service from within services.msc (win+r and type it in). Then select the RTEC service, rightclick it and hit restart.

Found an issue ?

Try to fix it yourself.

This is an opensource project if you think you can fix the issue yourself do so and shoot me a pull request.

Create an Issue on github.

If nothing works for you just report the issue and let the community help you.