You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Using the example: floris/examples/10_optimize_yaw.py
I have calculated the AEP for my wind farm both baseline and after yaw optimization. However, I would like to calculate AEP after yaw optimization, optimizing not only for one wind speed which is then applied to a range of speeds, but optimizing for all wind speeds at steps of 1m/s. Then applying the yaw offsets for each wind speed to calculate the AEP gain. Do you have an example that does this you could share?
This discussion was converted from issue #461 on January 26, 2023 17:49.
Heading
Bold
Italic
Quote
Code
Link
Numbered list
Unordered list
Task list
Attach files
Mention
Reference
Menu
reacted with thumbs up emoji reacted with thumbs down emoji reacted with laugh emoji reacted with hooray emoji reacted with confused emoji reacted with heart emoji reacted with rocket emoji reacted with eyes emoji
-
Dear Floris team,
Using the example: floris/examples/10_optimize_yaw.py
I have calculated the AEP for my wind farm both baseline and after yaw optimization. However, I would like to calculate AEP after yaw optimization, optimizing not only for one wind speed which is then applied to a range of speeds, but optimizing for all wind speeds at steps of 1m/s. Then applying the yaw offsets for each wind speed to calculate the AEP gain. Do you have an example that does this you could share?
Many thanks!
Best regards,
Ana
Originally posted by @Ana-GS in #433 (comment)
Beta Was this translation helpful? Give feedback.
All reactions