Skip to content

Latest commit

 

History

History
62 lines (39 loc) · 3.08 KB

README.md

File metadata and controls

62 lines (39 loc) · 3.08 KB
Raw

Haute42 : COSMOX Bottom Foam

Haute42 : COSMOX Bottom Foam

Attribution

The following text must be included in any distribution of derivatives of these files. All links must also be included.

Copyright © 2024 TheTrain

Licensed under CC BY 4.0

Changes from the original design:

  • list any changes you make here

Summary

These are files for cutting foam that will fit the bottom of Haute42 : COSMOX units.

Cutting Process

Each of these have been tested on my Cricut Maker 3 and fit on their respective unit.

These have also been tested on a Glowforge by someone else and work as well.

It is recommended to use adhesive back foam for these.

Dimensions

Haute42 B Series Bottom Foam - 196mm x 96mm
Haute42 G Series Bottom Foam - 194mm x 123mm
Haute42 M Series Bottom Foam - 235.8mm x 161.8mm
Haute42 M+ Series Bottom Foam (smaller cut) - 290mm x 190mm - NOTE 1
Haute42 M+ Series Bottom Foam - 293.9mm x 193.9mm
Haute42 Mini Series Bottom Foam (old) - 158mm x 73mm - NOTE 2
Haute42 Mini Series Bottom Foam - 158mm x 71.2mm
Haute42 S Series Bottom Foam - 194mm x 123mm
Haute42 T Series Bottom Foam - 291mm x 191mm
Haute42 T Series Bottom Foam (Updated T Clear) - 291mm x 191mm
Haute42 R Series Bottom Foam - 291mm x 191mm

NOTE 1 - The new M+ Series is larger than most A4 sized foam sheets. I have made a slightly smaller cut that will fit an A4 sheet. NOTE 2 - There is an older version of the Mini that does not have a passthrough USB port on it.

All source files were made in Affinity Designer 2 based off of reference files that were provided to me directly by Haute42 : COSMOX. The source files for Affinity Designer 2 can be found in the Source folder. The files provided by Haute42 : COSMOX are not available.

Donations

Donations are not necessary but always welcome! All received donations will be used to try out new designs or send boards to people for testing, iterations and helping people get board setups that might not be in an economic position to get one themselves.

https://www.paypal.com/donate/?hosted_button_id=2JMTZVCGLDYC2

Revision History

v1.0

  • Initial open source design

Acknowledgments

  • TheTrain for doing the foam design
  • Haute42/COSMOX for providing the reference files