init_board_efr32xg1.c

/***************************************************************************//**
 * @file
 * @brief init_board_efr32xg1.c
 *******************************************************************************
 * # License
 * <b>Copyright 2018 Silicon Laboratories Inc. www.silabs.com</b>
 *******************************************************************************
 *
 * The licensor of this software is Silicon Laboratories Inc. Your use of this
 * software is governed by the terms of Silicon Labs Master Software License
 * Agreement (MSLA) available at
 * www.silabs.com/about-us/legal/master-software-license-agreement. This
 * software is distributed to you in Source Code format and is governed by the
 * sections of the MSLA applicable to Source Code.
 *
 ******************************************************************************/

#if defined(HAL_CONFIG)
#include "bsphalconfig.h"
#include "hal-config.h"
#else
#include "bspconfig.h"
#endif

#include "board_features.h"
#include "em_cmu.h"

#include "em_cmu.h"

#include "em_usart.h"
#include "mx25flash_spi.h"

#include "bsp.h"

void initBoard(void)
{
  // Enable clock for CRYOTIMER
  CMU_ClockEnable(cmuClock_CRYOTIMER, true);
  // Enable clock for PRS
  CMU_ClockEnable(cmuClock_PRS, true);
#ifdef FEATURE_EXP_HEADER_USART3
  // Enable clock for USART3
  CMU_ClockEnable(cmuClock_USART3, true);
#else
  // Enable clock for USART0
  CMU_ClockEnable(cmuClock_USART0, true);
#endif
  // Enable GPIO clock source
  CMU_ClockEnable(cmuClock_GPIO, true);

  // Put the SPI flash into Deep Power Down mode for those radio boards where it is available
  MX25_init();
  MX25_DP();
  // We must disable SPI communication
  MX25_deinit();
}