The AP is detectable but the dchp does not give an ip

[cdelgehier]

Hello

I am configuring my RaspAP via RJ45 and I dedicate wlan0 to the RaspAP.

I can connect to my SSID but it does not give me an IP in the expected range.

By doing a port forward via ssh through the eth0, I managed to configure the AP via the webui but I do not understand what is wrong

My logs:
https://pastebin.com/gSMZnXxu

Thanks

[cdelgehier]

The issue is probably here DHCP packet received on wlan0 which has no address but I expected that thise did the job

[billz]

RaspAP has a number of tools to help you perform a self-diagnosis. A short list, in order of priority:

1. Generate a debug log.
2. Enable logging for hostapd and DHCP.
3. Perform a system reset.

The latter is useful if you've modified RaspAP's default settings. In the absence of system logs (your pastbin is the install log) or other details, there's nothing I or anyone else can do to assist you with troubleshooting.

[cdelgehier]

Hello

Thanks for your answer

1. I have already provided the debug log in the pastebin https://pastebin.com/gSMZnXxu
2. the pastebin also contains the dnsmasq log but here is the DHCP log

wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
wlan0: interface state COUNTRY_UPDATE->ENABLED
wlan0: AP-ENABLED 
wlan0: INTERFACE-DISABLED 
wlan0: INTERFACE-ENABLED 
nl80211: kernel reports: key not allowed
Failed to set beacon parameters
wlan0: interface state ENABLED->DISABLED
wlan0: AP-DISABLED 
wlan0: CTRL-EVENT-TERMINATING 
nl80211: deinit ifname=wlan0 disabled_11b_rates=0
wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
wlan0: interface state COUNTRY_UPDATE->ENABLED
wlan0: AP-ENABLED 

3. I have already tested the reset several times, I changed the SSID only to have the impression of moving forward.

The SSID is announced and we can connect to it but we do not receive an IP from the DHCP and strangely the IP defined in the webui is not configured on wlan0

[billz]

Here's a clue:

Sep  3 09:20:33 dnsmasq[1519]: warning: interface wlan0 does not currently exist

You'll need to resolve this first before using RaspAP.