Security System

A Security System, that can be used to trigger an alarm and send notifications. Can be activated with a group of sensors using HomeKit automations.

Type	Service Type
55	Security System

The following configuration is available:

Section	Key	Description
Actions	"0", "1" etc.	The actions performed by the service
State & Status Inputs	"f[n]" & "g[n]"	Inputs that manage service state
Service Notifications	"m"	Notifications to send by another service

Example

{
  "a": [{
    "t": 55,
    "es":[{
      "h": 2,
      "i": 1,
      "1": { "m": [ [ 1, 4 ] ] }
    }]
  }]
}

This is an example of a security system ("t": 55) with a hidden switch used to trigger alarm when security system is activated.

Actions

Key	Action	Description
"0"	Stay at Home mode selected	(default)
"1"	Away from Home mode selected
"2"	Night mode selected
"3"	OFF mode selected
"4"	Alarm triggered
"5"	Alarm triggered when Stay at Home mode selected
"6"	Alarm triggered when Away from Home mode selected
"7"	Alarm triggered when Night mode selected

Service Notifications

The list of notifications "m" supported are as follows:

Value	Notification
0	Set Stay at Home mode
1	Set Away from Home mode
2	Set Night mode
3	Set OFF mode
4	Trigger alarm
5	Trigger alarm if Stay at Home mode selected
6	Trigger alarm if Away from Home mode selected
7	Trigger alarm if Night mode selected
10	Set Stay at Home mode status only
11	Set Away from Home mode status only
12	Set Night mode status only
13	Set OFF mode status only

Setting status only will not exec any associated action.

See the general Service Notifications section for details of how to configure these notifications.