This example demonstrates the usage of NFC 2 Click board with BGM220P Explorer Kit based on I2C communication.
NFC 2 Click is based on the PN7150, high-performance full NFC solution with integrated firmware and I2C interface designed for contactless communication at 13.56 MHz from NXP.
NFC 2 Click board can be used for the detection of NFC Tag and can be used for rapidly integrating NFC technology in any application.
-
A T2T tag
The NFC 2 Click board can just be "clicked" into its place. Be sure that the board's 45-degree corner matches the Explorer Kit's 45-degree white line.
You can either create a project based on an example project or start with an empty example project.
-
From the Launcher Home, add the BRD4314A to My Products, click on it, and click on the EXAMPLE PROJECTS & DEMOS tab. Find the example project with the filter: nfc 2.
-
Click Create button on the Third Party Hardware Drivers - PN7150 - NFC 2 Click (Mikroe) - I2C example. Example project creation dialog pops up -> click Create and Finish and Project should be generated.
-
Build and flash this example to the board.
-
Create an "Empty C Project" for the "BGM220 Explorer Kit Board" using Simplicity Studio v5. Use the default project settings.
-
Copy the file
app/example/mikroe_nfc2_pn7150/app.c
into the project root folder (overwriting the existing file). -
Install the software components:
-
Open the .slcp file in the project.
-
Select the SOFTWARE COMPONENTS tab.
-
Install the following components:
- [Services] → [IO Stream] → [IO Stream: USART] → default instance name: vcom
- [Application] → [Utility] → [Log]
- [Third Party Hardware Drivers] → [Wireless Connectivity] → [PN7150 - NFC 2 Click (Mikroe) - I2C] → use default configuration
-
-
Build and flash this example to the board.
Note:
-
Make sure that the SDK extension already be installed. If not please follow this documentation.
-
Third-party Hardware Drivers Extension must be enabled for the project to install "PN7150 - NFC 2 Click (Mikroe) - I2C" component.
The application is composed of three sections :
- Application Initialization: - Initialization driver enables - I2C, hw reset, reset and initialize core, disabling standby mode, starting test procedure, set configuration and start discovery, also write log.
- Application process: NFC 2 Click board can be used for the detection of NFC tag and displays its value via USART terminal.
After initialization, the application automatically looks for nearby compatible tags. Place a T2T tag near NFC 2 Click board. After detecting a tag, the application shows logs on the terminal.
You can launch Console that's integrated into Simplicity Studio or use a third-party terminal tool like TeraTerm to receive the data from the USB. A screenshot of the console output is shown in the figure below.
To report bugs in the Application Examples projects, please create a new "Issue" in the "Issues" section of third_party_hw_drivers_extension repo. Please reference the board, project, and source files associated with the bug, and reference line numbers. If you are proposing a fix, also include information on the proposed fix. Since these examples are provided as-is, there is no guarantee that these examples will be updated to fix these issues.
Questions and comments related to these examples should be made by creating a new "Issue" in the "Issues" section of third_party_hw_drivers_extension repo.