diff --git a/package/boot/uboot-envtools/files/qualcommax_ipq60xx b/package/boot/uboot-envtools/files/qualcommax_ipq60xx
index 749b053aabce47..3737f2654efb42 100644
--- a/package/boot/uboot-envtools/files/qualcommax_ipq60xx
+++ b/package/boot/uboot-envtools/files/qualcommax_ipq60xx
@@ -14,6 +14,11 @@ case "$board" in
 	[ -n "$idx" ] && \
 		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x10000" "0x10000"
 	;;
+linksys,mr7350)
+	idx="$(find_mtd_index u_env)"
+	[ -n "$idx" ] && \
+		ubootenv_add_uci_config "/dev/mtd$idx" "0x0" "0x40000" "0x20000" "2"
+	;;
 netgear,wax214)
 	idx="$(find_mtd_index 0:appsblenv)"
 	[ -n "$idx" ] && \
diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile
index 86e2337e00bf17..2b913dc8433488 100644
--- a/package/firmware/ipq-wifi/Makefile
+++ b/package/firmware/ipq-wifi/Makefile
@@ -35,6 +35,7 @@ ALLWIFIBOARDS:= \
 	dynalink_dl-wrx36 \
 	edgecore_eap102 \
 	edimax_cax1800 \
+	linksys_mr7350 \
 	linksys_mx4200 \
 	linksys_mx5300 \
 	netgear_lbr20 \
@@ -153,6 +154,7 @@ $(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
 $(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
 $(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
 $(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
+$(eval $(call generate-ipq-wifi-package,linksys_mr7350,Linksys MR7350))
 $(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
 $(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
 $(eval $(call generate-ipq-wifi-package,netgear_lbr20,Netgear LBR20))
diff --git a/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-mr7350.dts b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-mr7350.dts
new file mode 100644
index 00000000000000..3bc75b7b2a0a20
--- /dev/null
+++ b/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq6000-mr7350.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/dts-v1/;
+
+#include "ipq6018.dtsi"
+#include "ipq6018-cp-cpu.dtsi"
+#include "ipq6018-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Linksys MR7350";
+	compatible = "linksys,mr7350", "qcom,ipq6018";
+
+	aliases {
+		serial0 = &blsp1_uart3;
+		serial1 = &blsp1_uart2;
+		led-boot = &led_system_blue;
+		led-running = &led_system_blue;
+		led-failsafe = &led_system_red;
+		led-upgrade = &led_system_green;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs-append = " root=/dev/ubiblock0_0";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		wps-button {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&tlmm 56 GPIO_ACTIVE_LOW>;
+		};
+
+		reset-button {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 57 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		lan1-amber {
+			label = "amber:lan1";
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&qca8075_0 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan1-green {
+			label = "green:lan1";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&qca8075_0 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan2-amber {
+			label = "amber:lan2";
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&qca8075_1 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan2-green {
+			label = "green:lan2";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&qca8075_1 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan3-amber {
+			label = "amber:lan3";
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&qca8075_2 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan3-green {
+			label = "green:lan3";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&qca8075_2 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan4-amber {
+			label = "amber:lan4";
+			color = <LED_COLOR_ID_AMBER>;
+			gpios = <&qca8075_3 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		lan4-green {
+			label = "green:lan4";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&qca8075_3 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan-amber {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&qca8075_4 0 GPIO_ACTIVE_HIGH>;
+		};
+
+		wan-green {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&qca8075_4 1 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_USB;
+			gpios = <&tlmm 60 GPIO_ACTIVE_HIGH>;
+			trigger-sources = <&usb3_port1>, <&usb3_port2>;
+			linux,default-trigger = "usbport";
+		};
+	};
+
+	reg_usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&tlmm 61 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+};
+
+&tlmm {
+	hsuart_pins: hsuart-pins {
+		mux {
+			pins = "gpio69", "gpio70",
+				"gpio71", "gpio72";
+			function = "blsp1_uart";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	i2c_pins: i2c-pins {
+		mux {
+			pins = "gpio42", "gpio43";
+			function = "blsp2_i2c";
+			drive-strength = <8>;
+			bias-pull-down;
+		};
+	};
+
+	mdio_pins: mdio-state {
+		mdc-pins {
+			pins = "gpio64";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mdio-pins {
+			pins = "gpio65";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+};
+
+&blsp1_i2c3 {
+	pinctrl-0 = <&i2c_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	led-controller@62 {
+		compatible = "nxp,pca9633";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x62>;
+
+		led_system_red: led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led_system_green: led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led_system_blue: led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&hsuart_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_uart3 {
+	pinctrl-0 = <&serial_3_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&dwc_0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb3_port1: port@1 {
+		reg = <1>;
+		#trigger-source-cells = <0>;
+	};
+
+	usb3_port2: port@2 {
+		reg = <2>;
+		#trigger-source-cells = <0>;
+	};
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&qpic_nand {
+	status = "okay";
+
+	nand@0 {
+		reg = <0>;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+		nand-bus-width = <8>;
+
+		partitions {
+			compatible = "qcom,smem-part";
+		};
+	};
+};
+
+&qusb_phy_0 {
+	status = "okay";
+};
+
+&ssphy_0 {
+	status = "okay";
+};
+
+&usb3 {
+	vbus-supply = <&reg_usb_vbus>;
+	status = "okay";
+};
+
+&mdio {
+	status = "okay";
+
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
+
+	ethernet-phy-package@0 {
+		compatible = "qcom,qca8075-package";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0>;
+
+		qca8075_0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		qca8075_1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		qca8075_2: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		qca8075_3: ethernet-phy@3 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <3>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		qca8075_4: ethernet-phy@4 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+};
+
+&switch {
+	status = "okay";
+
+	switch_lan_bmp = <(ESS_PORT1 | ESS_PORT2 | ESS_PORT3 | ESS_PORT4)>;
+	switch_wan_bmp = <ESS_PORT5>;
+	switch_mac_mode = <MAC_MODE_PSGMII>;
+
+	qcom,port_phyinfo {
+		port@1 {
+			port_id = <1>;
+			phy_address = <0>;
+		};
+		port@2 {
+			port_id = <2>;
+			phy_address = <1>;
+		};
+		port@3 {
+			port_id = <3>;
+			phy_address = <2>;
+		};
+		port@4 {
+			port_id = <4>;
+			phy_address = <3>;
+		};
+		port@5 {
+			port_id = <5>;
+			phy_address = <4>;
+		};
+	};
+};
+
+&edma {
+	status = "okay";
+};
+
+&dp1 {
+	status = "okay";
+	phy-handle = <&qca8075_0>;
+	label = "lan1";
+};
+
+&dp2 {
+	status = "okay";
+	phy-handle = <&qca8075_1>;
+	label = "lan2";
+};
+
+&dp3 {
+	status = "okay";
+	phy-handle = <&qca8075_2>;
+	label = "lan3";
+};
+
+&dp4 {
+	status = "okay";
+	phy-handle = <&qca8075_3>;
+	label = "lan4";
+};
+
+&dp5 {
+	status = "okay";
+	phy-handle = <&qca8075_4>;
+	label = "wan";
+};
+
+&wifi {
+	status = "okay";
+
+	qcom,ath11k-calibration-variant = "Linksys-MR7350";
+	qcom,ath11k-fw-memory-mode = <1>;
+};
diff --git a/target/linux/qualcommax/image/ipq60xx.mk b/target/linux/qualcommax/image/ipq60xx.mk
index 79822ceb0118bf..90a61dff477aba 100644
--- a/target/linux/qualcommax/image/ipq60xx.mk
+++ b/target/linux/qualcommax/image/ipq60xx.mk
@@ -11,6 +11,24 @@ define Device/8devices_mango-dvk
 endef
 TARGET_DEVICES += 8devices_mango-dvk
 
+define Device/linksys_mr7350
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := MR7350
+	SOC := ipq6000
+	NAND_SIZE := 256m
+	KERNEL_SIZE := 8192k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGE_SIZE := 75776k
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
+		append-ubi | linksys-image type=MR7350
+	DEVICE_PACKAGES := ipq-wifi-linksys_mr7350 \
+		kmod-leds-pca963x kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += linksys_mr7350
+
 define Device/netgear_wax214
        $(call Device/FitImage)
        $(call Device/UbiFit)
diff --git a/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/01_leds b/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/01_leds
index 189822157f3c79..dc7bb49eae0c1b 100644
--- a/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/01_leds
+++ b/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/01_leds
@@ -7,6 +7,18 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+linksys,mr7350)
+	ucidef_set_led_netdev "lan1-port-activity" "LAN1-PORT-ACTIVITY" "amber:lan1" "lan1" "link tx rx"
+	ucidef_set_led_netdev "lan1-port-link" "LAN1-PORT-LINK" "green:lan1" "lan1" "link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan2-port-activity" "LAN2-PORT-ACTIVITY" "amber:lan2" "lan2" "link tx rx"
+	ucidef_set_led_netdev "lan2-port-link" "LAN2-PORT-LINK" "green:lan2" "lan2" "link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan3-port-activity" "LAN3-PORT-ACTIVITY" "amber:lan3" "lan3" "link tx rx"
+	ucidef_set_led_netdev "lan3-port-link" "LAN3-PORT-LINK" "green:lan3" "lan3" "link_10 link_100 link_1000"
+	ucidef_set_led_netdev "lan4-port-activity" "LAN4-PORT-ACTIVITY" "amber:lan4" "lan4" "link tx rx"
+	ucidef_set_led_netdev "lan4-port-link" "LAN4-PORT-LINK" "green:lan4" "lan4" "link_10 link_100 link_1000"
+	ucidef_set_led_netdev "wan-port-activity" "WAN-PORT-ACTIVITY" "amber:wan" "wan" "link tx rx"
+	ucidef_set_led_netdev "wan-port-link" "WAN-PORT-LINK" "green:wan" "wan" "link_10 link_100 link_1000"
+	;;
 yuncore,fap650)
 	ucidef_set_led_netdev "wlan5ghz" "WLAN 5GHz LED" "blue:wlan-5ghz" "wlan0" "tx rx"
 	ucidef_set_led_netdev "wlan2ghz" "WLAN 2.4GHz LED" "green:wlan-2ghz" "wlan1" "tx rx"
diff --git a/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network b/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network
index f5fd35cf440787..79dbe0084d1eb1 100644
--- a/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network
+++ b/target/linux/qualcommax/ipq60xx/base-files/etc/board.d/02_network
@@ -14,6 +14,9 @@ ipq60xx_setup_interfaces()
 	8devices,mango-dvk)
 		ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
 		;;
+	linksys,mr7350)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		;;
 	netgear,wax214)
 		ucidef_set_interfaces_lan_wan "lan"
 		;;
@@ -26,9 +29,30 @@ ipq60xx_setup_interfaces()
 	esac
 }
 
+ipq60xx_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+	local label_mac=""
+
+	case $board in
+	linksys,mr7350)
+		label_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		lan_mac=$label_mac
+		wan_mac=$label_mac
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
 board_config_update
 board=$(board_name)
 ipq60xx_setup_interfaces $board
+ipq60xx_setup_macs $board
 board_config_flush
 
 exit 0
diff --git a/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata b/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata
index 23a3da0b4bffe2..c056b679838d93 100644
--- a/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata
+++ b/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/firmware/11-ath11-caldata
@@ -12,6 +12,7 @@ case "$FIRMWARE" in
 	8devices,mango-dvk)
 		caldata_extract "0:ART" 0x1000 0x20000
 		;;
+	linksys,mr7350|\
 	netgear,wax214)
 		caldata_extract "0:art" 0x1000 0x10000
 		;;
diff --git a/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
new file mode 100644
index 00000000000000..a67cc7262b3cac
--- /dev/null
+++ b/target/linux/qualcommax/ipq60xx/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac
@@ -0,0 +1,18 @@
+[ "$ACTION" == "add" ] || exit 0
+
+PHYNBR=${DEVPATH##*/phy}
+
+[ -n $PHYNBR ] || exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board=$(board_name)
+
+case "$board" in
+	linksys,mr7350)
+		addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		[ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress
+		[ "$PHYNBR" = "1" ] && macaddr_add $addr 1 > /sys${DEVPATH}/macaddress
+		;;
+esac
diff --git a/target/linux/qualcommax/ipq60xx/base-files/etc/init.d/bootcount b/target/linux/qualcommax/ipq60xx/base-files/etc/init.d/bootcount
old mode 100755
new mode 100644
index 6347976372b14f..0b8a84ca5a9422
--- a/target/linux/qualcommax/ipq60xx/base-files/etc/init.d/bootcount
+++ b/target/linux/qualcommax/ipq60xx/base-files/etc/init.d/bootcount
@@ -6,6 +6,9 @@ START=99
 
 boot() {
 	case $(board_name) in
+		linksys,mr7350)
+			mtd resetbc s_env || true
+		;;
 		yuncore,fap650)
 			fw_setenv owrt_bootcount 0
 		;;
diff --git a/target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh b/target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh
index a8e4872cdd55e4..a0f5023af56bb1 100644
--- a/target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/qualcommax/ipq60xx/base-files/lib/upgrade/platform.sh
@@ -33,6 +33,20 @@ EOF
 
 platform_do_upgrade() {
 	case "$(board_name)" in
+	linksys,mr7350)
+		boot_part="$(fw_printenv -n boot_part)"
+		if [ "$boot_part" -eq "1" ]; then
+			fw_setenv boot_part 2
+			CI_KERNPART="alt_kernel"
+			CI_UBIPART="alt_rootfs"
+		else
+			fw_setenv boot_part 1
+			CI_UBIPART="rootfs"
+		fi
+		fw_setenv boot_part_ready 3
+		fw_setenv auto_recovery yes
+		nand_do_upgrade "$1"
+		;;
 	netgear,wax214)
 		nand_do_upgrade "$1"
 		;;