Skip to content

Latest commit

 

History

History
323 lines (254 loc) · 8.8 KB

09-bootstrapping-kubernetes-workers.md

File metadata and controls

323 lines (254 loc) · 8.8 KB
Raw

Bootstrapping the Kubernetes Worker Nodes

In this lab you will bootstrap three Kubernetes worker nodes. The following components will be installed on each node: runc, container networking plugins, containerd, kubelet, and kube-proxy.

Prerequisites

The commands in this lab must be run on each worker instance: worker-0, worker-1, and worker-2. Login to each worker instance using the ssh command. Example:

for instance in worker-0 worker-1 worker-2; do
  external_ip=$(aws ec2 describe-instances --filters \
    "Name=tag:Name,Values=${instance}" \
    "Name=instance-state-name,Values=running" \
    --output text --query 'Reservations[].Instances[].PublicIpAddress')

  echo ssh -i kubernetes.id_rsa ubuntu@$external_ip
done

Now ssh into each one of the IP addresses received in last step.

Running commands in parallel with tmux

tmux can be used to run commands on multiple compute instances at the same time. See the Running commands in parallel with tmux section in the Prerequisites lab.

Provisioning a Kubernetes Worker Node

Install the OS dependencies:

sudo apt-get update
sudo apt-get -y install socat conntrack ipset

The socat binary enables support for the kubectl port-forward command.

Disable Swap

By default the kubelet will fail to start if swap is enabled. It is recommended that swap be disabled to ensure Kubernetes can provide proper resource allocation and quality of service.

Verify if swap is enabled:

sudo swapon --show

If output is empthy then swap is not enabled. If swap is enabled run the following command to disable swap immediately:

sudo swapoff -a

To ensure swap remains off after reboot consult your Linux distro documentation.

Download and Install Worker Binaries

wget -q --show-progress --https-only --timestamping \
  https://github.com/kubernetes-sigs/cri-tools/releases/download/v1.21.0/crictl-v1.21.0-linux-amd64.tar.gz \
  https://github.com/opencontainers/runc/releases/download/v1.0.0-rc93/runc.amd64 \
  https://github.com/containernetworking/plugins/releases/download/v0.9.1/cni-plugins-linux-amd64-v0.9.1.tgz \
  https://github.com/containerd/containerd/releases/download/v1.4.4/containerd-1.4.4-linux-amd64.tar.gz \
  https://storage.googleapis.com/kubernetes-release/release/v1.21.0/bin/linux/amd64/kubectl \
  https://storage.googleapis.com/kubernetes-release/release/v1.21.0/bin/linux/amd64/kube-proxy \
  https://storage.googleapis.com/kubernetes-release/release/v1.21.0/bin/linux/amd64/kubelet

Create the installation directories:

sudo mkdir -p \
  /etc/cni/net.d \
  /opt/cni/bin \
  /var/lib/kubelet \
  /var/lib/kube-proxy \
  /var/lib/kubernetes \
  /var/run/kubernetes

Install the worker binaries:

mkdir containerd
tar -xvf crictl-v1.21.0-linux-amd64.tar.gz
tar -xvf containerd-1.4.4-linux-amd64.tar.gz -C containerd
sudo tar -xvf cni-plugins-linux-amd64-v0.9.1.tgz -C /opt/cni/bin/
sudo mv runc.amd64 runc
chmod +x crictl kubectl kube-proxy kubelet runc 
sudo mv crictl kubectl kube-proxy kubelet runc /usr/local/bin/
sudo mv containerd/bin/* /bin/

Configure CNI Networking

Retrieve the Pod CIDR range for the current compute instance:

POD_CIDR=$(curl -s http://169.254.169.254/latest/user-data/ \
  | tr "|" "\n" | grep "^pod-cidr" | cut -d"=" -f2)
echo "${POD_CIDR}"

Create the bridge network configuration file:

cat <<EOF | sudo tee /etc/cni/net.d/10-bridge.conf
{
    "cniVersion": "0.4.0",
    "name": "bridge",
    "type": "bridge",
    "bridge": "cnio0",
    "isGateway": true,
    "ipMasq": true,
    "ipam": {
        "type": "host-local",
        "ranges": [
          [{"subnet": "${POD_CIDR}"}]
        ],
        "routes": [{"dst": "0.0.0.0/0"}]
    }
}
EOF

Create the loopback network configuration file:

cat <<EOF | sudo tee /etc/cni/net.d/99-loopback.conf
{
    "cniVersion": "0.4.0",
    "name": "lo",
    "type": "loopback"
}
EOF

Configure containerd

Create the containerd configuration file:

sudo mkdir -p /etc/containerd/

cat << EOF | sudo tee /etc/containerd/config.toml
[plugins]
  [plugins.cri.containerd]
    snapshotter = "overlayfs"
    [plugins.cri.containerd.default_runtime]
      runtime_type = "io.containerd.runtime.v1.linux"
      runtime_engine = "/usr/local/bin/runc"
      runtime_root = ""
EOF

Create the containerd.service systemd unit file:

cat <<EOF | sudo tee /etc/systemd/system/containerd.service
[Unit]
Description=containerd container runtime
Documentation=https://containerd.io
After=network.target

[Service]
ExecStartPre=/sbin/modprobe overlay
ExecStart=/bin/containerd
Restart=always
RestartSec=5
Delegate=yes
KillMode=process
OOMScoreAdjust=-999
LimitNOFILE=1048576
LimitNPROC=infinity
LimitCORE=infinity

[Install]
WantedBy=multi-user.target
EOF

Configure the Kubelet

WORKER_NAME=$(curl -s http://169.254.169.254/latest/user-data/ \
| tr "|" "\n" | grep "^name" | cut -d"=" -f2)
echo "${WORKER_NAME}"

sudo mv ${WORKER_NAME}-key.pem ${WORKER_NAME}.pem /var/lib/kubelet/
sudo mv ${WORKER_NAME}.kubeconfig /var/lib/kubelet/kubeconfig
sudo mv ca.pem /var/lib/kubernetes/

Create the kubelet-config.yaml configuration file:

cat <<EOF | sudo tee /var/lib/kubelet/kubelet-config.yaml
kind: KubeletConfiguration
apiVersion: kubelet.config.k8s.io/v1beta1
authentication:
  anonymous:
    enabled: false
  webhook:
    enabled: true
  x509:
    clientCAFile: "/var/lib/kubernetes/ca.pem"
authorization:
  mode: Webhook
clusterDomain: "cluster.local"
clusterDNS:
  - "10.32.0.10"
podCIDR: "${POD_CIDR}"
resolvConf: "/run/systemd/resolve/resolv.conf"
runtimeRequestTimeout: "15m"
tlsCertFile: "/var/lib/kubelet/${WORKER_NAME}.pem"
tlsPrivateKeyFile: "/var/lib/kubelet/${WORKER_NAME}-key.pem"
EOF

The resolvConf configuration is used to avoid loops when using CoreDNS for service discovery on systems running systemd-resolved.

Create the kubelet.service systemd unit file:

cat <<EOF | sudo tee /etc/systemd/system/kubelet.service
[Unit]
Description=Kubernetes Kubelet
Documentation=https://github.com/kubernetes/kubernetes
After=containerd.service
Requires=containerd.service

[Service]
ExecStart=/usr/local/bin/kubelet \\
  --config=/var/lib/kubelet/kubelet-config.yaml \\
  --container-runtime=remote \\
  --container-runtime-endpoint=unix:///var/run/containerd/containerd.sock \\
  --image-pull-progress-deadline=2m \\
  --kubeconfig=/var/lib/kubelet/kubeconfig \\
  --network-plugin=cni \\
  --register-node=true \\
  --v=2
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

Configure the Kubernetes Proxy

sudo mv kube-proxy.kubeconfig /var/lib/kube-proxy/kubeconfig

Create the kube-proxy-config.yaml configuration file:

cat <<EOF | sudo tee /var/lib/kube-proxy/kube-proxy-config.yaml
kind: KubeProxyConfiguration
apiVersion: kubeproxy.config.k8s.io/v1alpha1
clientConnection:
  kubeconfig: "/var/lib/kube-proxy/kubeconfig"
mode: "iptables"
clusterCIDR: "10.200.0.0/16"
EOF

Create the kube-proxy.service systemd unit file:

cat <<EOF | sudo tee /etc/systemd/system/kube-proxy.service
[Unit]
Description=Kubernetes Kube Proxy
Documentation=https://github.com/kubernetes/kubernetes

[Service]
ExecStart=/usr/local/bin/kube-proxy \\
  --config=/var/lib/kube-proxy/kube-proxy-config.yaml
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

Start the Worker Services

sudo systemctl daemon-reload
sudo systemctl enable containerd kubelet kube-proxy
sudo systemctl start containerd kubelet kube-proxy

Remember to run the above commands on each worker node: worker-0, worker-1, and worker-2.

Verification

The compute instances created in this tutorial will not have permission to complete this section. Run the following commands from the same machine used to create the compute instances.

List the registered Kubernetes nodes:

external_ip=$(aws ec2 describe-instances --filters \
    "Name=tag:Name,Values=controller-0" \
    "Name=instance-state-name,Values=running" \
    --output text --query 'Reservations[].Instances[].PublicIpAddress')

ssh -i kubernetes.id_rsa ubuntu@${external_ip} kubectl get nodes --kubeconfig admin.kubeconfig

output

NAME             STATUS   ROLES    AGE   VERSION
ip-10-0-1-20   Ready    <none>   51s   v1.21.0
ip-10-0-1-21   Ready    <none>   51s   v1.21.0
ip-10-0-1-22   Ready    <none>   51s   v1.21.0

Next: Configuring kubectl for Remote Access