Windows 10 Pro - WSL Ubuntu for Web Server (Base Ubuntu 20.04 LTS)

Depending on the operating system you are using:

Ubuntu 18.04 LTS and you can use the wsl-ubuntu-18.04 branch
Ubuntu 20.04 LTS and you can use the master branch

Note for Ubuntu 20.04, pre installation:

sudo apt-get clean
sudo rm -rf /var/lib/apt/lists
sudo mkdir -p /var/lib/apt/lists/partial
sudo apt-get clean
sudo apt-get update
sudo apt-get -u dist-upgrade

Customize your terminal (Oh My Zsh) on Ubuntu

Install ZSH and support for Powerline fonts

sudo apt install zsh -y
sudo apt install powerline fonts-powerline -y

Install Oh-my-zsh se instruction on oh-my-zsh web

via curl

sh -c "$(curl -fsSL https://raw.github.com/ohmyzsh/ohmyzsh/master/tools/install.sh)"

or via wget

sh -c "$(wget https://raw.github.com/ohmyzsh/ohmyzsh/master/tools/install.sh -O -)"

Follow the instruction and change terminal theme do you want.

Install Plugin for your ZSH

zsh-syntax-highlighting repo and installation
zsh-autosuggestions repo and installtion
zsh-completions repo and installation

Now in your .zshrc look:

plugins=(git zsh-syntax-highlighting zsh-autosuggestions zsh-completions)
autoload -U compinit && compinit

Customize your Aliases on Ubuntu

Copy from repo on .config directory and paste to your root or home user.

Rename file .env.sample to .env in your .config directory and change content in block:

# Your environment variables, you should change depend of your system setup
TLD_DOMAIN='test'
NGINX_VHOST_LOCATION=$HOME'/.config/vhosts'
PROJECT_LOCATION=$HOME'/projects/www'

You can change with your own project.

Then

Setup sources aliases and functions to your .zshrc

source $HOME/.config/.aliases
source $HOME/.config/.functions

Customize your VIM on Ubuntu

Copy file .vimrc to your root or home user directory

Open terminal

vim

From your terminal console will see installation all plugin from yout .vimrc or you can add plugin manualy.

LEMP Stack + Node Js

Before run all file bash script

You can mount windows drive to WSL which create wsl config on etc

sudo vim /etc/wsl.conf

Add this config:

# Enable extra metadata options by default
[automount]
enabled = true
root = /
options = "metadata,umask=22,fmask=11"
mountFsTab = false

# Enable DNS – even though these are turned on by default, we’ll specify here just to be explicit.
[network]
generateHosts = true
generateResolvConf = true

Save it :wq and restart WSL (open PowerShell as Administrator) then execute below this

Get-Service LxssManager | Restart-Service

You can check that drive show on wsl:

ls -al /c/ or ls -al /d/

Than you can link (Win10) project directory to (WSL) home directory etc:

ln -s /d/projects ~/.

Next step:

sudo apt update && sudo apt upgrade -y

Copy or clone this repository to your home directory Change directory to project wsl-web-config

1. Install Nginx

./install-nginx-on-wsl.sh

Copy all snippet files configuration: sudo cp -r etc/nginx/snippets/* /etc/nginx/snippets And you can change Nginx config nginx.conf for optimize, sample config: etc/nginx/nginx.conf Adding custom Virtual Hosts to your Nginx config, sample $HOME/.config/vhosts

// you can change "username" with your username

include /home/username/.config/vhosts/*;

Sample virtual host for Laravel project, file name: laravel-project

set $base /home/username/projects/laravel-project; change by your username

server {
    listen 80;
    listen [::]:80;

    server_name laravel-project.test;
    set $base /home/username/projects/laravel-project;
    root $base/public;

    index index.php index.html index.htm;

    location / {
        try_files $uri $uri/ /index.php?$query_string;
    }

    error_page 404 /index.php;

    location ~ \.php$ {
        include snippets/php_fastcgi.conf;
    }

    # additional config
    include snippets/general.conf;

    location ~ /\.(?!well-known).* {
        deny all;
    }
}

After install and custom configurations setup now with aliases you can run services:

s:nginx start
s:nginx restart
s:nginx stop
s:nginx status

2. Install MySQL

./install-mysql8-on-wsl.sh

Handdling MySQL Error Socket /var/run/mysqld/mysqld.sock

s:mdb stop
sudo usermod -d /var/lib/mysql/ mysql
s:mdb start

or

sudo service mysql stop
sudo usermod -d /var/lib/mysql/ mysql
sudo service mysql start

Now you have MySQL Server on your system (use aliases).

s:mdb start
s:mdb restart
s:mdb stop
s:mdb status

Start Service and try use mysql cli

sudo mysql -u root -p

Setup secure MySQL with password

sudo mysql_secure_installation

You can see password validate configuration metrics using the following query in MySQL client:

sudo mysql -u root -p

mysql> SHOW VARIABLES LIKE 'validate_password%';

The output should be something like that :

Variable_name	Value
validate_password.check_user_name	ON
validate_password.dictionary_file
validate_password.length	8
validate_password.mixed_case_count	1
validate_password.number_count	1
validate_password.policy	MEDIUM
validate_password.special_char_count	1

Then you can set the password policy level lower, for example:

mysql> SET GLOBAL validate_password.length = 6;
mysql> SET GLOBAL validate_password.number_count = 0;
mysql> SET GLOBAL validate_password.policy = 0;

mysql> SHOW VARIABLES LIKE 'validate_password%';

The output should be something like that :

Variable_name	Value
validate_password.check_user_name	ON
validate_password.dictionary_file
validate_password.length	6
validate_password.mixed_case_count	1
validate_password.number_count	1
validate_password.policy	LOW
validate_password.special_char_count	1

You can install with above script and with aliases you can run services:

s:mdb start
s:mdb restart
s:mdb stop
s:mdb status

3. Install PHP7.4 FPM

NOTE: Ubuntu 20.04 ships with PHP 7.4 in its upstream repositories. Just install it and the extensions you with the apt package manager.

./install-php-fpm-on-wsl.sh

You can install with above script and with aliases you can run services:

s:php start
s:php restart
s:php stop
s:php status

Fastcgi Settings on /etc/nginx/snippets/php_fastcgi.conf TCP fastcgi_pass 127.0.0.1:9000; Socket fastcgi_pass unix:/var/run/php/php7.4-fpm.sock;

Before you can user fastcgi_pass TCP you should change php7.4-fpm config on www.conf: /etc/php/7.4/fpm/pool.d/www.conf

; The address on which to accept FastCGI requests.
; Valid syntaxes are:
;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
;                            a specific port;
;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
;                            a specific port;
;   'port'                 - to listen on a TCP socket to all addresses
;                            (IPv6 and IPv4-mapped) on a specific port;
;   '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
listen = /run/php/php7.4-fpm.sock

Change to:

; The address on which to accept FastCGI requests.
; Valid syntaxes are:
;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
;                            a specific port;
;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
;                            a specific port;
;   'port'                 - to listen on a TCP socket to all addresses
;                            (IPv6 and IPv4-mapped) on a specific port;
;   '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
; listen = /run/php/php7.4-fpm.sock
listen = 127.0.0.1:9000

4. Install Redis Server

./install-redis-on-wsl.sh

Now you have Redis Server on your system (use aliases).

s:rdb start
s:rdb restart
s:rdb stop
s:rdb status

5. Install NODE JS use NVM

./install-nvm-on-wsl.sh

Now you have Node JS on your system.

Reference NVM Repo

6. Install MongoDB from Package Repo Ubuntu

./install-mongodb-on-wsl.sh

Now you have MongoDB Server on your system (use aliases).

s:mgdb start
s:mgdb restart
s:mgdb stop
s:mgdb status

Connection to mongodb shell

mongo --host 127.0.0.1:27017

Adding Admin User

By default, authentication is not enabled for MongoDB users. In production environment, it may be required to secure your server and enable user authentication.

Use the steps below to do that.

If you want to enable authentication, run the commands to create a new admin user after you’ve logged into MongoDB server.

mongo --host 127.0.0.1:27017

> use admin

Then run the commands below to create a new admin user

> db.createUser({user:"admin", pwd:"new_password_here", roles:[{role:"root", db:"admin"}]})

You should see a successful admin user created:

Successfully added user: {
	"user" : "admin",
	"roles" : [
		{
			"role" : "root",
			"db" : "admin"
		}
	]
}

Exit and continue below to enable MongoDB logon authentication.

Run the commands below to open MongoDB config file.

sudo vim /lib/systemd/system/mongod.service

Then change the highlighted line to look like the one below and save.

[Service]
User=mongodb
Group=mongodb
ExecStart=/usr/bin/mongod --auth --config /etc/mongod.conf
PIDFile=/var/run/mongodb/mongod.pid

Save and exit.

Restart MongDB to make the changes apply.

s:mgdb start

After installing MongoDB, its default configuration file is located at /etc/mongod.conf.

It is recommended to enable authentication since all users can access the database without authenticating.

To do that, open the configuration file by running the commands below:

sudo nano /etc/mongod.conf

Then edit the line shown below to enabled:

security:
  authorization: enabled

Restart MongoDB services after making the changes above.

s:mgdb restart

Now only authentication users will be allowed to access the database server.

mongo -u admin -p new_password_here --authenticationDatabase admin

Run the commands below to verify that authentication is enabled.

mongo -u admin -p --authenticationDatabase admin

You should then be prompted for a password.

7. Install Postgresql

./install-postgrsql-on-wsl.sh

Now you have Postgres Server on your system (use aliases).

s:pdb start
s:pdb restart
s:pdb stop
s:pdb status

Set PostgreSQL admin user’s password and do testing

Set a password for the default admin user

sudo su - postgres
postgres@asap:~$ psql -c "alter user postgres with password 'StrongPassword'"

Testing create user

createuser asapdotid

Add test database:

createdb testdb -O asapdotid

Setup password for user Asapdotid

psql
postgres=# alter user asapdotid with password 'asapdotid123';

Connect to use database testdb

\c testdb

Create table and add some dummy data:

create table test_table ( id int,first_name text, last_name text );
insert into test_table (id,first_name,last_name) values (1,'Foo','Bar');
select * from test_table;

After successfully create table, you should drop table and quite from testdb

DROP TABLE test_table;
/q

So you can drop databse testdb:

postgres@asap:~$ dropdb testdb;

Add correct permission files and directory optional (Laravel storage & boostrap/cache directory)

You can run shell script setPermission.sh and follow instruction

first setup setPermission.sh to executable:

chmod +x setPermission.sh

Then execute the file in terminal: ./setPermission.sh

or

You can add in composer.json on root Laravel project

"scripts": {
    "post-install-cmd": [
      "chgrp -R www-data storage bootstrap/cache",
      "chmod -R ug+rwx storage bootstrap/cache"
    ]
}

Do not hesitate if there are suggestions and criticisms 😃 @asapdotid

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Windows 10 Pro - WSL Ubuntu for Web Server (Base Ubuntu 20.04 LTS)

Customize your terminal (Oh My Zsh) on Ubuntu

Customize your Aliases on Ubuntu

Customize your VIM on Ubuntu

LEMP Stack + Node Js

Before run all file bash script

1. Install Nginx

2. Install MySQL

3. Install PHP7.4 FPM

4. Install Redis Server

5. Install NODE JS use NVM

6. Install MongoDB from Package Repo Ubuntu

7. Install Postgresql

Add correct permission files and directory optional (Laravel storage & boostrap/cache directory)

Files

README.md

Latest commit

History

README.md

File metadata and controls

Windows 10 Pro - WSL Ubuntu for Web Server (Base Ubuntu 20.04 LTS)

Customize your terminal (Oh My Zsh) on Ubuntu

Customize your Aliases on Ubuntu

Customize your VIM on Ubuntu

LEMP Stack + Node Js

Before run all file bash script

1. Install Nginx

2. Install MySQL

3. Install PHP7.4 FPM

4. Install Redis Server

5. Install NODE JS use NVM

6. Install MongoDB from Package Repo Ubuntu

7. Install Postgresql

Add correct permission files and directory optional (Laravel storage & boostrap/cache directory)