DtmfDetection & DtmfDetection.NAudio

Implementation of the Goertzel algorithm for the detection of DTMF tones (aka touch tones) in audio data.

package	use case
DtmfDetection	Use this package if you are only working with raw PCM data (i.e. arrays of `float`s).
DtmfDetection.NAudio	Integrates with NAudio to detect DTMF tones in audio files and audio streams (e.g. mic-in or the current audio output).

Quick start

In case DtmfDetection is not detecting any or only some of the DTMF tones in your audio data, have look at the troubleshooting section first.

With NAudio

How to detect and print DTMF changes (DTMF tone starting or stopping) in an mp3 file:

using System;
using DtmfDetection.NAudio;
using NAudio.Wave;

class Program {
    static void Main() {
        using var audioFile = new AudioFileReader("long_dtmf_tones.mp3");
        var dtmfs = audioFile.DtmfChanges();
        foreach (var dtmf in dtmfs) Console.WriteLine(dtmf);
    }
}

Output

1 started @ 00:00:02.7675736 (ch: 0)
1 stopped @ 00:00:05.5607029 (ch: 0)
2 started @ 00:00:06.7138321 (ch: 0)
2 stopped @ 00:00:06.8675736 (ch: 0)
3 started @ 00:00:07.3031972 (ch: 0)
3 stopped @ 00:00:07.4313378 (ch: 0)
4 started @ 00:00:08.2000680 (ch: 0)
4 stopped @ 00:00:10.5319501 (ch: 0)
5 started @ 00:00:12.0950793 (ch: 0)
5 stopped @ 00:00:12.2744444 (ch: 0)
6 started @ 00:00:12.7357142 (ch: 0)
6 stopped @ 00:00:12.8125850 (ch: 0)
7 started @ 00:00:14.5038321 (ch: 0)
7 stopped @ 00:00:14.5294557 (ch: 0)
7 started @ 00:00:14.5550793 (ch: 0)
7 stopped @ 00:00:16.8357142 (ch: 0)
8 started @ 00:00:17.6813378 (ch: 0)
8 stopped @ 00:00:17.7582086 (ch: 0)
9 started @ 00:00:18.4500680 (ch: 0)
9 stopped @ 00:00:18.5269614 (ch: 0)
# started @ 00:00:19.1163265 (ch: 0)
# stopped @ 00:00:19.1419501 (ch: 0)
# started @ 00:00:19.1675736 (ch: 0)
# stopped @ 00:00:19.3469614 (ch: 0)
0 started @ 00:00:19.8338321 (ch: 0)
0 stopped @ 00:00:19.8850793 (ch: 0)
* started @ 00:00:20.4744444 (ch: 0)
* stopped @ 00:00:20.6025850 (ch: 0)
1 started @ 00:00:22.0119501 (ch: 0)
1 stopped @ 00:00:23.7544444 (ch: 0)

How to detect and print multi-channel DTMF changes in a wav file while also merging the start and stop of each DTMF tone into a single data structure:

using System;
using DtmfDetection;
using DtmfDetection.NAudio;
using NAudio.Wave;

class Program {
    static void Main() {
        using var audioFile = new AudioFileReader("stereo_dtmf_tones.wav");
        var dtmfs = audioFile.DtmfChanges(forceMono: false).ToDtmfTones();
        foreach (var dtmf in dtmfs) Console.WriteLine(dtmf);
    }
}

Output

1 @ 00:00:00 (len: 00:00:00.9994557, ch: 0)
2 @ 00:00:01.9988208 (len: 00:00:00.9993878, ch: 1)
3 @ 00:00:03.9975736 (len: 00:00:01.9987529, ch: 0)
4 @ 00:00:04.9969614 (len: 00:00:01.9987528, ch: 1)
5 @ 00:00:07.9950793 (len: 00:00:00.9993651, ch: 0)
6 @ 00:00:07.9950793 (len: 00:00:00.9993651, ch: 1)
7 @ 00:00:09.9938321 (len: 00:00:02.9981180, ch: 0)
8 @ 00:00:11.0188208 (len: 00:00:00.9737642, ch: 1)
9 @ 00:00:14.0169614 (len: 00:00:00.9737415, ch: 0)
0 @ 00:00:15.0163265 (len: 00:00:00.9737415, ch: 0)

How to detect and print DTMF changes in audio output:

using System;
using DtmfDetection.NAudio;
using NAudio.CoreAudioApi;
using NAudio.Wave;

class Program {
    static void Main() {
        using var audioSource = new WasapiLoopbackCapture {
            ShareMode = AudioClientShareMode.Shared
        };

        using var analyzer = new BackgroundAnalyzer(audioSource);

        analyzer.OnDtmfDetected += dtmf => Console.WriteLine(dtmf);

        _ = Console.ReadKey(intercept: true);
    }
}

How to detect and print DTMF changes in microphone input while also lowering the detection threshold:

using System;
using DtmfDetection;
using DtmfDetection.NAudio;
using NAudio.Wave;

class Program {
    static void Main() {
        using var audioSource = new WaveInEvent {
            WaveFormat = new WaveFormat(Config.Default.SampleRate, bits: 32, channels: 1)
        };

        using var analyzer = new BackgroundAnalyzer(
            audioSource,
            Config.Default.WithThreshold(10));

        analyzer.OnDtmfDetected += dtmf => Console.WriteLine(dtmf);

        _ = Console.ReadKey(intercept: true);
    }
}

Without NAudio

How to detect and print DTMF tones in an array of PCM samples:

using System;
using System.Linq;
using DtmfDetection;

using static DtmfDetection.DtmfGenerator;

class Program {
    static void Main() {
        var samples = GenerateStereoSamples();
        foreach (var dtmf in samples.DtmfChanges(channels: 2))
            Console.WriteLine(dtmf);
    }

    // `DtmfDetection.DtmfGenerator` has helpers for generating DTMF tones.
    static float[] GenerateStereoSamples() =>
        Stereo(
            left: Generate(PhoneKey.Star),
            right: Concat(Mark(PhoneKey.One, ms: 40), Space(ms: 20), Mark(PhoneKey.Two, ms: 40)))
        .Take(NumSamples(milliSeconds: 40 + 20 + 40, channels: 2))
        .ToArray();
}

Output

* started @ 00:00:00 (ch: 0)
1 started @ 00:00:00 (ch: 1)
1 stopped @ 00:00:00.0000026 (ch: 1)
2 started @ 00:00:00.0000051 (ch: 1)
* stopped @ 00:00:00.0000100 (ch: 0)
2 stopped @ 00:00:00.0000100 (ch: 1)

Pre-built example tool

TODO: deploy example tool to choco

DTMF tone localization accuracy

Be aware that this library cannot locate DTMF tones with 100% accuracy, because the detector analyzes the data in ~26 ms blocks with the default configuration. This block size determines the resolution of the localization and every DTMF tone starting position will be "rounded off" to the start of the nearest block.

For instance, if a DTMF tone starts at 35 ms into the audio, its calculated starting position will be around 26 ms, i.e. at the beginning of the second block.

A resolution of 26 ms might seem rather inaccurate relative to the typical duration of a DTMF tone (40 ms). However, keep in mind that DTMF analysis typically is about correctly detecting DTMF tones and not about accurately locating them.

Configuring the detector

The library is designed to be very configurable. Of course, each setting of the detector configuration can be changed. Additionally it is possible to replace any part of its logic with a custom implementation.

Adjusting the detection threshold

The detector's threshold value is probably the setting that needs to be tweaked most often. Depending on the audio source and quality, the threshold might have to be increased to reduce false positives or decreased to reduce false negatives.

Typical values are between 30 and 35 with enabled Goertzel response normalization and 100 to 115 without it. Its default value is 30.

Changing the threshold value is easy, because each of the three main entry points take an optional Config argument (defaulting to Config.Default):

List<DtmfChange> float[].DtmfChanges(int, int, Config?)
List<DtmfChange> WaveStream.DtmfChanges(bool, Config?)
BackgroundAnalyzer(IWaveIn, bool, Action<DtmfChange>?, Config?, IAnalyzer?)

Now, simply create your own Config instance and pass it to the entry point you want to use:

var mycfg = new Config(threshold: 20, sampleBlockSize: ..., ...);
var dmtfs = waveStream.DtmfChanges(config: mycfg);

Or you start off with the default config and adjust it with one of its builder methods:

var mycfg = Config.Default.WithThreshold(20);

Disabling Goertzel response normalization

As of version 1.0.0 the frequency response calculated with Goertzel algorithm will be normalized with the total energy of the input signal. This effectively makes the detector invariant against changes in the loudness of the signal with very little additional computational costs.

You can test this yourself with a simple example program that detects DTMF tones in your system's current audio output, but with disabled response normalization:

using System;
using DtmfDetection.NAudio;
using NAudio.CoreAudioApi;
using NAudio.Wave;

class Program {
    static void Main() {
        using var audioSource = new WasapiLoopbackCapture {
            ShareMode = AudioClientShareMode.Shared
        };

        using var analyzer = new BackgroundAnalyzer(
            audioSource,
            config: Config.Default.WithNormalizeResponse(false));

        analyzer.OnDtmfDetected += dtmf => Console.WriteLine(dtmf);

        _ = Console.ReadKey(intercept: true);
    }
}

Now play any of the test files and observe the program's output. If your playback volume is high enough, DTMF tones should be detected. Try to gradually decrease the volume and see that no more DTMF tones will be detected as soon as the Goertzel responses fall below the detection threshold. With enabled response normalization all DTMF tones should be detected regardless of the volume level.

I generally recommend to leave response normalization enabled, because loudness invariance ensures that DTMF tones are detected correctly in a wider range of scenarios. However, if you are analyzing audio signals that feature strong background noises, you might accomplish better detection results by disabling response normalization.

Just note that without response normalization the detection threshold has to be significantly increased and depends on the loudness of your signal. A good starting point is a value of 100.

Providing a custom source of sample data

Different kinds of sample data are fed to the analysis in a unified way using the ISamples interface. Currently there are three implementations of ISamples:

implementation	package	usage
`AudioData`	`DtmfDetection`	created from a `float[]`
`AudioFile`	`DtmfDetection.NAudio`	created from an NAudio `WaveStream`
`AudioStream`	`DtmfDetection.NAudio`	created from an NAudio `IWaveIn`

In case none of the above implementations suit your needs, you can implement the interface yourself and pass it directly to the Analyzer:

// Untested `ISamples` implementation for `System.IO.Stream`s.
public class MySamples : ISamples, IDisposable {
    private readonly BinaryReader reader;
    private long position;
    public int Channels => 1;
    public int SampleRate => 8000;
    public TimeSpan Position => new TimeSpan((long)Math.Round(position * 1000.0 / SampleRate));
    public MySamples(Stream samples) => this.reader = new BinaryReader(samples);
    public int Read(float[] buffer, int count) {
        var safeCount = Math.Min(count, reader.BaseStream.Length / sizeof(float) - position);
        for (var i = 0; i < safeCount; i++, position++)
            buffer[i] = reader.ReadSingle();
        return (int)safeCount;
    }
    public void Dispose() => reader.Dispose();
}

// ...

var mySamples = new MySamples(myStream);
var analyzer = Analyzer.Create(mySamples, Config.Default);
var dtmfs = new List<DtmfChange>();

while (analyzer.MoreSamplesAvailable)
    dtmfs.AddRange(analyzer.AnalyzeNextBlock());

Refer to the API reference of the ISamples interface for more details on how to implement it correctly.

Injecting a custom detector implementation

TODO: document how to

Other configuration options

TODO: document other options

Troubleshooting

None or not all expected DTMF tones are detected

You should first try to lower the detection threshold. The default config uses a value of 30 which might be too high for your audio data. In case you get false positives afterwards, try increasing the threshold again to find the "sweet spot". If possible try to de-noise the audio data.

You can also try to disable the Goertzel response normalization. Generally this is not recommended, but it might give better results in certain cases. Be aware that without normalization you need to ensure that the threshold is tuned to the loudness of your audio data. I.e. when your audio becomes louder, you should also increase the threshold and when it becomes quieter, you have to decrease it. You should also use a higher starting value for the threshold (around 100).

API reference

DtmfDetection: ./src/DtmfDetection/README.md

DtmfDetection.NAudio: ./src/DtmfDetection.NAudio/README.md

Changelog

1.2.2

refactor wait time estimation of the BackgroundAnalyzer to a less handcrafted solution

1.2.1

BackgroundAnalyzer ctor now also takes a handler for the OnDtmfDetected event

1.2.0

add XML documentation
generate API reference

1.1.0

DtmfDetection:

add extension method for analyzing float arrays
add helpers for generating DTMF tones

1.0.1

DtmfDetection:

remove unwanted dependencies from nuget package

1.0.0

upgrade to netstandard2.1
make implementation much more configurable
improve runtime performance by ~25%

DtmfDetection:

normalize Goertzel response with total signal energy for loudness invariance

DtmfDetection.NAudio:

update NAudio reference to 1.10.0
correctly calculate wait time until enough samples can be read when analyzing audio provided by a NAudio.Wave.BufferedWaveProvider stream

0.9.2

DtmfDetection.NAudio:

update NAudio reference to 1.8.4.0

0.9.1

DtmfDetection:

update to .NET framework 4.7
reduce memory footprint a little bit

DtmfDetection.NAudio:

update to .NET framework 4.7

0.9.0

DtmfDetection:

implement multi-channel support
fix short DTMF tones not being detected
adjust Goertzel algorithm implementation a bit

DtmfDetection.NAudio:

fix mono-conversion (average all channels)

TODO

finish README
continuous deployment of CLI tool to choco
add config options to CLI tool

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

DtmfDetection & DtmfDetection.NAudio

Quick start

With NAudio

Without NAudio

Pre-built example tool

DTMF tone localization accuracy

Configuring the detector

Adjusting the detection threshold

Disabling Goertzel response normalization

Providing a custom source of sample data

Injecting a custom detector implementation

Other configuration options

Troubleshooting

None or not all expected DTMF tones are detected

API reference

Changelog

1.2.2

1.2.1

1.2.0

1.1.0

1.0.1

1.0.0

0.9.2

0.9.1

0.9.0

TODO

Files

README.md

Latest commit

History

README.md

File metadata and controls

DtmfDetection & DtmfDetection.NAudio

Quick start

With NAudio

Without NAudio

Pre-built example tool

DTMF tone localization accuracy

Configuring the detector

Adjusting the detection threshold

Disabling Goertzel response normalization

Providing a custom source of sample data

Injecting a custom detector implementation

Other configuration options

Troubleshooting

None or not all expected DTMF tones are detected

API reference

Changelog

1.2.2

1.2.1

1.2.0

1.1.0

1.0.1

1.0.0

0.9.2

0.9.1

0.9.0

TODO