Is the remote control model YADOF not yet supported?

[lijiazhiren]

The Gree air conditioner I use uses this YADOF remote control
Is this model relatively rare?
I can find very little information
I tried this method without success to control my Gree air conditioner
https://github.com/Hagakurje/ESPHome_Gree_AC

[crankyoldgit]

I don't know. Why don't you try it and find out?
See FAQ item: https://github.com/crankyoldgit/IRremoteESP8266/wiki/Frequently-Asked-Questions#user-content-How_do_I_work_out_what_protocol_my_remote_uses

[lijiazhiren]

i think i found the problem I found two codes that work
https://github.com/zhang5hb5/Gree_YADOF/blob/master/STANDARD.txt

关机：
8950,4400,700,1550,700,500,700,500,700,500,700,1600,700,1550,700,1600,700,500,700,500,700,1600,700,450,750,450,700,500,700,500,750,450,700,500,700,500,700,500,700,500,700,500,700,1550,750,1550,700,500,700,500,700,500,700,500,650,500,750,450,700,1600,700,500,700,1600,700,450,700,500,700,1600,700,500,700,19750,700,1550,700,500,700,500,700,500,700,1600,700,500,700,500,700,450,700,500,750,450,750,450,750,450,750,450,700,1600,700,500,700,450,700,500,700,500,700,500,700,500,700,500,700,500,700,500,700,500,700,450,700,500,700,500,700,500,700,500,700,500,700,500,700,500,700,39550,8950,4400,700,1550,700,500,700,500,700,500,700,1600,700,1550,700,1600,700,500,700,500,700,1600,700,450,750,450,700,500,700,500,700,500,700,500,700,500,700,500,700,500,700,450,750,1550,700,1600,700,500,700,500,700,500,700,450,750,450,700,500,700,1600,700,1600,700,1550,700,500,700,500,700,1600,700,500,700,19750,700,450,700,500,700,500,700,500,700,500,700,500,700,500,700,500,700,500,700,450,700,500,700,500,700,500,700,500,700,500,700,500,700,500,700,450,750,450,700,500,700,1600,700,500,700,1600,700,500,700,450,700,500,700,500,700,500,700,500,700,1600,700,500,700,500,700

开机：18℃ 制冷 超强 上下左右扫风 风速 5档
8900,4450,650,1600,650,550,650,550,650,1650,650,1650,600,1700,600,1650,650,550,650,550,650,1650,600,550,650,550,650,550,650,550,650,550,650,550,650,550,650,500,650,550,650,550,650,1700,650,1600,650,550,650,500,700,500,650,550,650,550,650,550,650,1650,650,550,650,1650,600,550,650,550,650,1650,650,550,650,19750,700,1650,600,550,650,550,650,550,650,1650,650,500,700,500,650,550,650,550,650,550,650,550,650,550,650,550,600,1700,650,500,700,500,700,500,650,550,650,550,700,500,700,500,700,500,700,450,750,450,700,500,700,500,700,500,700,500,700,500,700,500,700,500,700,1550,700,39550,9000,4350,700,1600,700,500,700,500,700,1550,750,1550,700,1600,700,1600,700,450,750,450,700,1600,700,500,700,500,700,500,700,500,700,500,700,450,750,450,700,500,700,500,700,500,700,1600,700,1550,750,450,700,500,700,500,700,500,700,500,700,500,700,1600,700,1550,700,1600,700,500,700,500,700,1550,700,500,700,19750,700,500,700,500,700,500,700,500,700,500,700,450,700,500,700,500,700,500,700,500,700,500,700,500,700,500,700,500,700,450,750,450,700,500,700,500,700,500,700,500,700,1600,700,450,750,1550,700,500,700,500,700,500,700,500,700,500,700,500,700,1550,700,500,700,1600,700

In the first code, there are two large values 39550 19750
In the second code, there are also two large values 39550 19750

Below is my configuration and received code
I am using esphome

remote_receiver:
pin:
number: GPIO5
inverted: true
dump: raw

[20:52:46][D][remote.raw:028]: Received Raw: 8996, -4482, 657, -1653, 657, -549, 657, -550, 656, -1651, 656, -1651, 657, -554, 653, -550, 653, -553, 653, -1653, 655, -553, 654, -551, 654, -1653, 656, -551, 654, -642, 570, -550, 652, -552, 654, -595, 614, -549, 657, -550, 655, -551,
[20:52:46][D][remote.raw:041]: 654, -601, 608, -1654, 655, -550, 653, -556, 654, -552, 654, -550, 656, -550, 656, -550, 657, -1653, 655, -551, 653, -1653, 655, -549, 660, -549, 654, -1652, 659, -549, 657
[20:52:46][D][remote.raw:028]: Received Raw: 663, -578, 624, -549, 653, -554, 657, -549, 658, -549, 656, -549, 655, -552, 656, -552, 655, -551, 656, -549, 658, -549, 660, -546, 656, -551, 656, -1649, 659, -551, 655, -550, 655, -551, 655, -552, 658, -549, 657, -550, 656, -548, 655,
[20:52:46][D][remote.raw:041]: -570, 639, -550, 656, -551, 653, -555, 654, -551, 655, -550, 656, -551, 657, -550, 656, -1651, 655, -1652, 658, -1651, 656
[20:52:46][D][remote.raw:028]: Received Raw: 8996, -4482, 659, -1650, 661, -548, 654, -552, 656, -1651, 656, -1650, 656, -551, 657, -549, 657, -549, 658, -1651, 654, -551, 657, -550, 655, -1651, 658, -552, 654, -551, 656, -549, 658, -549, 655, -551, 656, -551, 657, -550, 653, -552,
[20:52:46][D][remote.raw:041]: 658, -549, 656, -1652, 657, -550, 655, -586, 620, -550, 656, -549, 659, -550, 654, -551, 656, -1650, 660, -1648, 658, -1650, 656, -551, 657, -551, 654, -1651, 656, -552, 658
[20:52:46][D][remote.raw:028]: Received Raw: 657, -599, 609, -599, 609, -549, 655, -550, 658, -549, 656, -550, 662, -548, 653, -551, 656, -549, 656, -553, 651, -551, 659, -549, 653, -553, 654, -551, 655, -551, 657, -551, 653, -552, 656, -550, 656, -552, 657, -549, 657, -1649, 659,
[20:52:46][D][remote.raw:041]: -549, 656, -550, 656, -551, 656, -550, 657, -549, 662, -546, 655, -550, 655, -1649, 659, -552, 654, -1651, 656, -1651, 659

It can be seen that there is no such value as 39550 19750
It seems that the method of esphome cannot receive values exceeding 10000
Maybe I should receive codes in a different way

[crankyoldgit]

I decoded the first raw message (关机) for your above message, and it decodes as:

Code type      18 (KELVINATOR)
Code bits      128
State value    0x71023050112000007102307000005020
Msg Description: Power: Off, Mode: 1 (Cool), Temp: 18C, Fan: 5 (High), Turbo: On, Quiet: Off, XFan: Off, Ion: Off, Light: On, Swing(H): On, Swing(V): 1 (Auto)

and the second one (开机：18℃ 制冷 超强 上下左右扫风 风速 5档) as:

Code type      18 (KELVINATOR)
Code bits      128
State value    0x790230501120008079023070000050A0
Msg Description: Power: On, Mode: 1 (Cool), Temp: 18C, Fan: 5 (High), Turbo: On, Quiet: Off, XFan: Off, Ion: Off, Light: On, Swing(H): On, Swing(V): 1 (Auto)

So the answer is, yes it is supported. But it's not the "GREE" protocol, you need to use the "KELVINATOR" protocol instead.

[lijiazhiren]

Yes, after troublesome manual export, I finally connected this air conditioner to my universal remote control, thank you