Won't print

[mrcrider]

I have my printrbot hooked up, Ive loaded a file and it won't print.

[Ghostkeeper]

It won't start printing until you somehow get the g-code onto your Printrbot.

I suggest you save the g-code on an SD card and put the SD card into your Printrbot. This is the preferred method according to Printrbot.

If you intend to print via the USB cable and you're on Windows, you must first download their USB drivers. See the link they post here: https://printrbot.com/project/simple-metal/

[mrcrider]

Thanks for your response. I have printed on this printer before so my computer has the drivers and I can see the model in the Cura software so the g code is there. Still working on it. thanks

…

On Wed, Nov 30, 2016 at 4:36 PM, Ghostkeeper ***@***.***> wrote: It won't start printing until you somehow get the g-code onto your Printrbot. I suggest you save the g-code on an SD card and put the SD card into your Printrbot. This is the preferred method <https://printrbot.zendesk.com/hc/en-us/articles/201730880-Can-I-print-directly-from-an-SD-card-without-a-computer-> according to Printrbot. If you intend to print via the USB cable and you're on Windows, you must first download their USB drivers. See the link they post here: https://printrbot.com/project/simple-metal/ — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#1546 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AXJbwNIA5rpFmDLxybkOWH0AfBfJzb0fks5rDex3gaJpZM4LAKyZ> .

-- Roger J Crider M.Ed Business Technology Facilitator Technology Coach/Online Education Adviser FBLA, Student Council and BotsIQ Adviser FR Webmaster

[lfleitas]

I am having the exact same issue. Have printed with no problem prior to now and it will not switch to print. It stays in save. Did yours ever get fixed?