RANDOM GAPS in layer view

[JORGECIVANTOS]

Hi everyone! Who can help me? I make a very simple ring (1.2 mm thickness). I can see it well in all the views except the layers one. Some gaps appear and they area printed too. Any idea? Thanks in advance. From Spain. I attach two pictures.

[BagelOrb]

Try Cura 2. Cura 1.15 is not actively being developed any more. You mean the gaps are also present in the print? Saying gaps are printed is confusing me... If you have a 0.6 nozzle size than this has to do with rounding errors. You should set your nozzle size or line width to 0.59. I think you can achieve the same by setting the wall thickness to 0.59. Note that the wall thickness is applied on both sides of the print, so if your print is 1.2mm thick then the walls can maximally be 0.6mm. Op 25 dec. 2016 12:09 schreef "JORGECIVANTOS" <notifications@github.com>:

…

Hi everyone! Who can help me? I make a very simple ring (1.2 mm thickness). I can see it well in all the views except the layers one. Some gaps appear and they area printed too. Any idea? Thanks in advance. From Spain. I attach two pictures. [image: well view] <https://cloud.githubusercontent.com/assets/24762704/21470856/f838edf2-ca9a-11e6-9b43-e53223f299ef.png> [image: layer view] <https://cloud.githubusercontent.com/assets/24762704/21470857/fdd6ca5e-ca9a-11e6-9dcc-971c80d55c0b.png> — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#1548>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AIe9Ece0RGrtqrXpGmT5mN0uDOO13ICUks5rLk72gaJpZM4LVYtt> .