-
Notifications
You must be signed in to change notification settings - Fork 0
/
adsp.b12
184 lines (184 loc) · 47.7 KB
/
adsp.b12
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
uerr_inject_crash.c:Should have crashed due to div0: 7/%u=%duerr_inject_crash.c:Should have crashed due to null access: %#x->%#xsns_dd_lsm6ds3_uimg.c:LSM6DS3 - get_data read bytes (%d) p_sensors (%d) num_sensors %dsns_dd_lsm6ds3_fifo_uimg.c:LSM6DS3 - write reg failed . status=%usns_dd_lsm6ds3_fifo_uimg.c:LSM6DS3 - Failed status (%u) odr_idx (%d)sns_dd_lsm6ds3_fifo_uimg.c:LSM6DS3 - trigger_fifo: SNS_DDF_EINVALID_PARAM , sensor=%u num_samples %dsns_dd_lsm6ds3_fifo_uimg.c:LSM6DS3 - trigger_fifo: returning .. trigger_now (%d) fifo_info.fifo_enabled (%d)sns_dd_lsm6ds3_fifo_uimg.c:LSM6DS3 - No raw buffer FIFO already disabledsns_dd_lsm6ds3_fifo_uimg.c:LSM6DS3 - Resetting - FIFO bytes (%d) not multiple of 6 - pattern (%d)sns_dd_lsm6ds3_fifo_uimg.c:LSM6DS3 - ERROR*** not enough bytes in fifo to make a samplesns_dd_lsm6ds3_fifo_uimg.c:LSM6DS3 - sns_dd_send_fifo_data:invalid rate_idx (%d) sns_dd_mag_fifo_akm099xx_uimg.c: set_operation start. mode=%dsns_dd_mag_fifo_akm099xx_uimg.c: Skip because same mode(%d) is specified.sns_dd_mag_fifo_akm099xx_uimg.c: Writing CNTL1 failed. status=%d.sns_dd_mag_fifo_akm099xx_uimg.c: Writing CNTL2 failed. status=%d.sns_dd_mag_fifo_akm099xx_uimg.c: after power_down mode change, time_prev_int=%d.sns_dd_mag_fifo_akm099xx_uimg.c: sample_fifo: num_sample=%u, in_irq=%usns_dd_mag_fifo_akm099xx_uimg.c: Set to SNS_DDF_EINVALID_DATA Count=%dsns_dd_mag_fifo_akm099xx_uimg.c: This is the first data.sns_dd_mag_fifo_akm099xx_uimg.c: Update time_prev_int and time_last_report_sample time for delay of the wm is changed.sns_dd_mag_fifo_akm099xx_uimg.c: ts_now= %u, last_report_sample= %u, sampleInterval= %u avg_sampling_intvl= %dsns_dd_mag_fifo_akm099xx_uimg.c: ts_now is incorrect, ts_now= %u, time_prev_in= %u, prev_average_interval= %d, avg_sampling_intvl= %dsns_dd_mag_fifo_akm099xx_uimg.c: FIFO data is get asynchronously.sns_dd_mag_fifo_akm099xx_uimg.c: After Validate: timestamp= %u, end_timestamp= %u, total_samples= %d, time_last_report_sample= %usns_dd_mag_fifo_akm099xx_uimg.c: After apply filter delay sent to SMGR: timestamp= %u, end_timestamp= %u ts_now= %u now= %usns_dd_mag_fifo_akm099xx_uimg.c: Sensor status incorrect! no 0x14c1sns_dd_mag_fifo_akm099xx_uimg.c: handle_irq: gpio_num=%dsns_dd_mag_fifo_akm099xx_uimg.c: FIFO WM event notify failed. Status = %d.sns_dd_mag_fifo_akm099xx_uimg.c: FIFO overflow check failed. Status = %d.sns_dd_mag_fifo_akm099xx_uimg.c: FIFO overflow event notify failed. Status = %d.sns_dd_mag_fifo_akm099xx_uimg.c: handle_timersns_dd_mag_fifo_akm099xx_uimg.c: get_data: powerstate=%d, mode=%dsns_dd_mag_fifo_akm099xx_uimg.c: Setting timer failed. Status = %d.sns_dd_mag_fifo_akm099xx_uimg.c: Unknown Power Status = %d.sns_dd_mag_fifo_akm099xx_uimg.c: trigger_fifo_data: trigger_now = %u num_samples = %usns_dd_mag_fifo_akm099xx_uimg.c: Reading FIFO data failed. Status = %d.sns_dd_mag_fifo_akm099xx_uimg.c: read_sensor: samples to read=%usns_dd_mag_fifo_akm099xx_uimg.c: Malloc error for sensor_data (%d).sns_dd_mag_fifo_akm099xx_uimg.c: Malloc error for sensor_sample (%d).sns_dd_mag_fifo_akm099xx_uimg.c: read_port() error (%d).sns_dd_mag_fifo_akm099xx_uimg.c: akm,Q16,X,Y,Z before DC: %d %d %dsns_dd_mag_fifo_akm099xx_uimg.c: DC error (%d).sns_dd_mag_fifo_akm099xx_uimg.c: akm,Q16,X,Y,Z after DC: %d %d %dsns_dd_mag_fifo_akm099xx_uimg.c: notify_smgr_err: status=%dsns_dd_mag_fifo_akm099xx_uimg.c: akm Validate timestamp:adjusting end time to current time by :%usns_dd_mag_fifo_akm099xx_uimg.c: akm Validate timestamp:adjusting end time bigger :%usns_dd_mag_fifo_akm099xx_uimg.c: Validate timestamp errorsns_dd_mag_fifo_akm099xx_uimg.c: Adjusted timestamps start %u-->%u end %u-->%usns_dd_mag_fifo_akm099xx_uimg.c: sns_logpkt_commit error = 0x%X.sns_dd_mag_fifo_akm099xx_uimg.c: Reading a port failed. status = %d.sns_dd_mag_fifo_akm099xx_uimg.c: sample_sensor: in_timer=%dsns_dd_mag_fifo_akm099xx_uimg.c: ts_now= %u, timestamp= %u, sampleInterval= %u, average_interval= %dsns_dd_icm206xx_uimg.c:INVN - sns_dd_send_fifo_data - sub device hasn't been fully initialized yet.(acc id:%d, gyro id:%d)sns_dd_icm206xx_uimg.c:INVN - Opps, FIFO is overflow somehow, resetting fifo...sns_dd_icm206xx_uimg.c:INVN - warning: bytes_to_read bigger than device_fifo_sizesns_dd_icm206xx_uimg.c:INVN - malloc memory for fifo_buffer failedsns_dd_icm206xx_uimg.c:INVN - ts_end bigger than real TS now: %dsns_dd_icm206xx_uimg.c:INVN - sns_dd_parse_fifo_data - sub device hasn't been fully initialized yet.(acc id:%d, gyro id:%d)sns_dd_icm206xx_uimg.c:INVN - Can't find acc sensor!sns_dd_icm206xx_uimg.c:INVN - Can't find gyro sensor!sns_dd_icm206xx_uimg.c:INVN - WARNING: Can't find temperature sensor!sns_dd_icm206xx_uimg.c:INVN - warning: fifo is not enabled!sns_dd_icm206xx_uimg.c:INVN - No memory is available to acc sensor sample(%d)sns_dd_icm206xx_uimg.c:INVN - No memory is available to gyro sensor sample(%d)sns_dd_icm206xx_uimg.c:INVN - No memory is available to temperature sensor sample(%d)sns_dd_icm206xx_uimg.c:INVN - sns_dd_icm206xx_get_data(error = %d)sns_dd_icm206xx_uimg.c:INVN - sns_dd_icm206xx_handle_timer - enter(sub_dev_id = %d)sns_dd_icm206xx_uimg.c:INVN - sns_dd_icm206xx_handle_timer - end sns_dd_icm206xx_uimg.c:INVN - sns_dd_icm206xx_handle_irq - sub device hasn't been fully initialized yet.(acc id:%d, gyro id:%d)sns_dd_icm206xx_uimg.c:INVN - sns_dd_icm206xx_handle_irq sub_dev_id = %dsns_dd_icm206xx_uimg.c:INVN - MOTION IS DETECTED!sns_dd_icm206xx_uimg.c:INVN - Unexpected WOM happened just after acc is enabled, ignore it!sns_dd_icm206xx_uimg.c:INVN - Opps, FIFO is overflow, resetting fifo...sns_dd_icm206xx_uimg.c:INVN - handle unexpected IRQ which trigger in enable_sched_data functionsns_dd_icm206xx_uimg.c:INVN - handle unexpected IRQsns_dd_icm206xx_uimg.c:INVN - sns_dd_icm206xx_trigger_fifo_data entered (sensor = %d, num_samples = %d, trigger_now = %d)
sns_dd_icm206xx_uimg.c:INVN - sns_dd_icm206xx_trigger_fifo_data - device doesn't support FIFO!sns_dd_icm206xx_base_driver_uimg.c:INVN - inv_read_acc_raw_data(error = %d).
sns_dd_icm206xx_base_driver_uimg.c:INVN - inv_read_acc_sensor_data(error = %d).
sns_dd_icm206xx_base_driver_uimg.c:INVN - inv_read_temp_raw_data(error = %d).
sns_dd_icm206xx_base_driver_uimg.c:INVN - inv_read_temp_sensor_data(error = %d).
sns_dd_icm206xx_base_driver_uimg.c:INVN - inv_read_gyro_raw_data(error = %d).
sns_dd_icm206xx_base_driver_uimg.c:INVN - inv_read_gyro_sensor_data(error = %d).
sns_dd_icm206xx_base_driver_uimg.c:INVN - inv_read_int_status(error = %d).
sns_dd_icm206xx_base_driver_uimg.c:INVN - inv_read_wm_int_status(error = %d).
sns_dd_icm206xx_base_driver_uimg.c:INVN - inv_reset_fifo(resetting fifo...)
sns_dd_icm206xx_base_driver_uimg.c:INVN - inv_reset_fifo(error = %d).
sns_dd_icm206xx_base_driver_uimg.c:INVN - inv_read_fifo_count(error = %d).
sns_dd_icm206xx_base_driver_uimg.c:INVN - FIFO data was not read out completely!(bytes_read = %d, len = %d)sns_dd_icm206xx_base_driver_uimg.c:INVN - inv_read_fifo_raw_data(error = %d, read size = %d).
sns_dd_icm206xx_base_driver_uimg.c:INVN - inv_chip_init(error=%d).sns_dd_alsprx_silergy_uimg.c: Interface not definedsns_dd_alsprx_silergy_uimg.c: async malloc failsns_dd_alsprx_silergy_uimg.c: cannot notify smgr prxsns_dd_alsprx_silergy_uimg.c: async_notify: als Lux=%d, count=%d
sns_dd_alsprx_silergy_uimg.c: async_notify: prx data = %d
sns_dd_alsprx_silergy_uimg.c: prox_samples()sns_dd_alsprx_silergy_uimg.c: prx sample malloc failsns_dd_alsprx_silergy_uimg.c: prox_samples: Event=%d Data=%d Raw Data=%dsns_dd_alsprx_silergy_uimg.c: als sample malloc failsns_dd_alsprx_silergy_uimg.c: ALS data: MLux:%d Reported Data: %dsns_dd_alsprx_silergy_uimg.c: async_notify: @silergy_als_sensor_samples als data = %d
sns_dd_alsprx_silergy_uimg.c: Interrupt enable ,gpio = %dsns_dd_alsprx_silergy_uimg.c: Interrupt disablesns_dd_alsprx_silergy_uimg.c: Start ALS polling timersns_dd_alsprx_silergy_uimg.c: Cancel ALS polling timersns_dd_alsprx_silergy_uimg.c: Start PS polling timersns_dd_alsprx_silergy_uimg.c: Cancel PS polling timersns_dd_alsprx_silergy_uimg.c: handle_irq() - NULL driver handlesns_dd_alsprx_silergy_uimg.c: handle_irq()sns_dd_alsprx_silergy_uimg.c: handle_timer() Timer:%dsns_dd_alsprx_silergy_uimg.c: handle_timer() - NULL driver handlesns_dd_alsprx_silergy_uimg.c: First ALS handle_timersns_dd_alsprx_silergy_uimg.c: First PS handle_timersns_dd_alsprx_silergy_uimg.c: PS data pollingsns_dd_alsprx_silergy_uimg.c: ALS data pollingsns_dd_alsprx_silergy_uimg.c: get_data()sns_dd_alsprx_silergy_uimg.c: first PS integ cycle not complete yet.sns_dd_alsprx_silergy_uimg.c: first ALS integ cycle not complete yet.sns_dd_alsprx_silergy_uimg.c: malloc get data error, size: %dsns_dd_alsprx_silergy_uimg.c: system get PRX data,%dsns_dd_alsprx_silergy_uimg.c: system get ALS data,%dsns_dd_mag_mmc5603nj_uimg.c:ERR - in mmc5603nj get data, para passed null sns_dd_mag_mmc5603nj_uimg.c:DD - mmc5603nj get data insns_dd_mag_mmc5603nj_uimg.c:ERR - get data fail, state->port_handle is %dsns_dd_mag_mmc5603nj_uimg.c:ERR - get data fail, status is %dsns_dd_mag_mmc5603nj_uimg.c:DD - in mmc5603nj get data, reg data %d %d %d sns_dd_mag_mmc5603nj_uimg.c:ERR - in mmc5603nj-get data malloc mem fail !sns_dd_mag_mmc5603nj_uimg.c:DD - mmc5603nj get data, donesns_dd_mag_mmc5603nj_uimg.c:DD - mmc5603nj don't use async modesilergy_sy3088as.c: is_sy3088as_enabledsilergy_sy3088as.c: REG[0x%02x] = 0x%02x
silergy_sy3088as.c: Set Register Default
silergy_sy3088as.c: PS enable:%d
silergy_sy3088as.c: ALS enable:%d
silergy_sy3088as.c: %s ERROR
silergy_sy3088as.c: PS ON als_temp_data=%d
silergy_sy3088as.c: als_cal_data=%d
silergy_sy3088as.c: ps_temp_data=%d
silergy_sy3088as.c: ps_cal_data=%d
silergy_sy3088as.c: als data:%d lux:%d
silergy_sy3088as.c: Sun light State
silergy_sy3088as.c: FARTHER AWAY state
silergy_sy3088as.c: New cross talk : %d
silergy_sy3088as.c: FAR to NEAR state
silergy_sy3088as.c: NEAR to FAR state
silergy_sy3088as.c: STEADY cross talk : %d
silergy_sy3088as.c: Samples : {%d %d %d %d %d}
silergy_sy3088as.c: Oil Samples : {%d %d %d %d %d}
silergy_sy3088as.c: CT:%d, LT:%d, HT:%d, PS:%d, Event:%d
silergy_sy3088as.c: Oil_occurred:%d, Saturation:%d
silergy_sy3088as.c: caliLux:%d
silergy_sy3088as.c: als_adc_coefs:%d
silergy_sy3088as.c: ALS COUNT:%d, MLUX:%d
silergy_sy3088as.c: SY3088AS SY3088AS_REG_PS_TH=:%d ,res=%d
silergy_sy3088as.c: SY3088AS Device id:%d is error! res=%d
silergy_sy3088as.c: SY3088AS Device id:%d!!
silergy_sy3088as.c: average PS:%d, abs_slope_sum:%d, is_ps_steady:%d
sns_dd_sx9324_uimg.c:SMTC - SX9324_DIFFMSB=%xsns_dd_sx9324_uimg.c:SMTC - SX9324_DIFFLSB=%xsns_dd_pa22a.c: is_pa22a_enabledsns_dd_pa22a.c: Clear interrupt flag, sensor = %x
sns_dd_pa22a.c: REG[0x%02x] = 0x%02x
sns_dd_pa22a.c: Set Register Default
sns_dd_pa22a.c: nvdb->nv_size:%d
sns_dd_pa22a.c: PS enable:%d
sns_dd_pa22a.c: ALS enable:%d
sns_dd_pa22a.c: ALS Offset Off flag set
sns_dd_pa22a.c: %s ERROR
sns_dd_pa22a.c: als_temp_data=%d als raw data:%d
sns_dd_pa22a.c: als_cal_data[%d]=%d
sns_dd_pa22a.c: ps_temp_data=%d
sns_dd_pa22a.c: ps_cal_data=%d
sns_dd_pa22a.c: ALS state:%d
sns_dd_pa22a.c: ALS COUNT:%d, MLUX:%d, ALS_GAIN:0x%02x
sns_dd_pa22a.c: Sun light State
sns_dd_pa22a.c: FARTHER AWAY state
sns_dd_pa22a.c: New cross talk : %d
sns_dd_pa22a.c: PS still in saturation
sns_dd_pa22a.c: FAR to NEAR state
sns_dd_pa22a.c: NEAR to FAR state
sns_dd_pa22a.c: STEADY cross talk : %d
sns_dd_pa22a.c: Samples : {%d %d %d %d %d}
sns_dd_pa22a.c: Oil Samples : {%d %d %d %d %d}
sns_dd_pa22a.c: CT:%d, LT:%d, HT:%d, PS:%d, Event:%d
sns_dd_pa22a.c: Oil_occurred:%d, Saturation:%d
sns_dd_pa22a.c: pa22a_read_als:%d
sns_dd_pa22a.c: pa22a_read_als:Clear ALS Offset Off flag
sns_dd_pa22a.c: PA22A Device id:%d is error!!
sns_dd_pa22a.c: PA22A Device id:%d!!
sns_dd_pa22a.c: average PS:%d, abs_slope_sum:%d, is_ps_steady:%d
sns_dd_alsprx_uimg.c: i2c_write_byte failed :%dsns_dd_alsprx_uimg.c: i2c_read_byte failed :%dsns_dd_alsprx_uimg.c: i2c_read_buf failed :%dsns_dd_alsprx_uimg.c: Interface not definedsns_dd_alsprx_uimg.c: async malloc failsns_dd_alsprx_uimg.c: cannot notify smgr prxsns_dd_alsprx_uimg.c: async_notify: als Lux=%d, count=%d
sns_dd_alsprx_uimg.c: async_notify: prx data = %d
sns_dd_alsprx_uimg.c: sns_dd_txc_async_notify_pending_data num_sensors:%dsns_dd_alsprx_uimg.c: prox_samples()sns_dd_alsprx_uimg.c: prx sample malloc failsns_dd_alsprx_uimg.c: prox_samples: Event=%d Data=%d Raw Data=%dsns_dd_alsprx_uimg.c: als sample malloc failsns_dd_alsprx_uimg.c: ALS data: MLux:%d Reported Data: %dsns_dd_alsprx_uimg.c: Interrupt enable ,gpio = %dsns_dd_alsprx_uimg.c: Interrupt disablesns_dd_alsprx_uimg.c: Start ALS polling timersns_dd_alsprx_uimg.c: Cancel ALS polling timersns_dd_alsprx_uimg.c: Start PS polling timersns_dd_alsprx_uimg.c: Cancel PS polling timersns_dd_alsprx_uimg.c: handle_irq() - NULL driver handlesns_dd_alsprx_uimg.c: handle_irq() CFG2:0x%02xsns_dd_alsprx_uimg.c: handle_irq() For PS:0x%02xsns_dd_alsprx_uimg.c: handle_irq() Notify change %dsns_dd_alsprx_uimg.c: handle_irq() For ALS:0x%02xsns_dd_alsprx_uimg.c: handle_timer() Timer:%dsns_dd_alsprx_uimg.c: handle_timer() - NULL driver handlesns_dd_alsprx_uimg.c: First ALS handle_timersns_dd_alsprx_uimg.c: First PS handle_timersns_dd_alsprx_uimg.c: PS data pollingsns_dd_alsprx_uimg.c: ALS data pollingsns_dd_alsprx_uimg.c: get_data() num_sensor:%dsns_dd_alsprx_uimg.c: first PS integ cycle not complete yet.sns_dd_alsprx_uimg.c: first ALS integ cycle not complete yet.sns_dd_alsprx_uimg.c: First PS integ cycle completesns_dd_alsprx_uimg.c: First ALS integ cycle completesns_dd_alsprx_uimg.c: malloc get data error, size: %dsns_dd_alsprx_uimg.c: system get PRX data,%dsns_dd_alsprx_uimg.c: system get ALS data,%dsns_scm_ext.c:read gyro_cal algo config registry params, enable:%d sample rate:%d report rate:%dsns_scm_ext.c:Sending SMGR Cal Req SensorId x:%dsns_scm_ext.c:Sending SMGR Cal Req Bias x:%d, y:%d, z:%dsns_scm_ext.c:Sending SMGR Cal Req Scale x:%d, y:%d, z:%dsns_scm_ext.c:Sending SMGR Cal Req Accuracy x:%dsns_scm_ext.c:read qmag_cal algo config registry params, enable:%d sample rate:%d report rate:%dsns_rh_main_uimg.c:data_type_latest_sample_ts(%u)sns_rh_main_uimg.c:WAKE_SIG curr state(%u) change count(%u)sns_rh_main_uimg.c:SLEEP_SIG curr state(%u), change count(%u)sns_smgr_ddf_if_uimg.c:DAF Indication ID: %d size: %dsns_smgr_ddf_if_uimg.c:notify_daf_ind - conn_handle=0x%x ind_msg=0x%x ind_size=%usns_smgr_ddf_if_uimg.c:Indication size of %d is truncated to %dsns_smgr_ddf_if_uimg.c:calling callback function - heap size %d, peak heap %d, callback func num %dsns_smgr_ddf_if_uimg.c:default heap calling callback function i=%dsns_smgr_ddf_if_uimg.c:SNS_OS_MALLOC failed - size %dsns_rh_rpt_gen_uimg.c:RH: Out of bounds ind_ptr->Indices_len =%u, ind_ptr->Samples_len=%usns_rh_mr.c:update_connection - conn=%u proc_type(was/now)=%u/%usns_smgr_ddf_if.c:notify_test_cmplt - sensor=%u status=%u err=%usns_smgr_ddf_if.c:set_attr - ddf_sensor=%u attrib=%u value=%u now=%usns_smgr_ddf_if.c:odr_changed_event - sensor=%u state=%usns_smgr_ddf_if.c:event_daf_active - ddf_sensor=%usns_smgr_ddf_if.c:event_daf_inactive - ddf_sensor=%usns_smgr_ddf_if.c:enable_sched_data - ddf_sensor=%u enable=%u stat=%u now=%usns_smgr_ddf_if.c:set_power_attr - !!WARNING!! powerstate going low while DAF is active!!sns_rh_sol.c:deactivate_report - addr=0x%x state=%u #inds=%u queued=%usns_rh_sol.c:resched_rpts - rpt_id=%u/0x%x tick=%u #inds=%usns_rh_sol.c:handle_pending_rpt - rpt_id=%u/0x%x ext_state=0x%04x pending=0x%xsns_rh_sol.c:resume_sensor_clients - #reports=%usns_rh_sol.c:find_report - rpt_id=%u/0x%x found=%u suspended=%usns_rh_sol.c:sched_existing_report - state=%u/%u identical=%u rpt_pending=0x%xsns_rh_sol.c:sched_existing_report - deleting existing pending reportsns_rh_sol.c:activate_report - addr=0x%x proc=%u state=%u #reports=%usns_rh_sol.c:schedule_periodic_report - alloc %u bytes failedsns_rh_sol.c:schedule_buffering_rpt - alloc %u bytes failedsns_rh_sol.c:same_report_rate - id=%u/0x%x intvl=%u next=%usns_smgr_reg.c:proc_reg_data - unable to find empty gpio_config slot for gpio_num %usns_rh_restricted_svc.c:cancel_restricted_req - conn_handle %usns_smgr_sensor_uimg.c:dri_fifo_async - ddf_sensor=%u #samples=%usns_smgr_sensor_uimg.c:validate_timestamps - sensor=%u sample_ts=%u now=%usns_smgr_sensor.c:update_sampling - mod orig: sensor=%u odr=%u depot=0x%X sampling=0x%Xsns_smgr_sensor.c:update_sampling - ddf val: sensor=%u odr=%u depot=0x%X sampling=0x%Xsns_smgr_sensor.c:update_odr - sensor=%u req=%u old=%u new=%usns_smgr_sensor.c:idle_state_events - unexpected events=0x%xsns_smgr_sensor.c:config_odr - ddf_sensor=%d req=%u curr=%u new=%usns_smgr_sensor.c:turn_off_sensor - enter - sensor=%u state=%u flags=0x%xsns_smgr_sensor.c:turn_off_sensor - exit - sensor=%d state=%u flags=0x%xsns_smgr_sensor.c:filter_done - ddf_sensor=%u fifo_intvl=%usns_smgr_sensor.c:md_state_events - unexpected events=0x%xsns_smgr_sensor.c:proc_cal - sensor=%u - unreliable accuracysns_smgr_main.c:WAKE_SIG curr state(%u) powerrail(%u) change count(%u)sns_smgr_main.c:SLEEP_SIG curr state(%u), change count(%u)sns_smgr_hw.c:gpio_config - sleep=%uqurt_elite_memorymap.cpp:qurt_elite_memorymap_add_remove_pool_page size or start addr is not a multiple of 4K (addr, size, status)->(0x%x, 0x%x, 0x%x)qurt_elite_memorymap.cpp:qurt_elite_memorymap_add_remove_pool_page poolID:(%d, 0x%lx%lx, %lx)qurt_elite_memorymap.cpp:qurt_elite_memorymap_add_remove_pool_page qurt_mem_pool_attach failed, poolID:(%d)qurt_elite_memorymap.cpp:qurt_elite_memorymap_add_remove_pool_page done. poolID:(%d, 0x%lx%lx, %lx). result 0x%lxsns_usmr.c:Client initiated : qmi_err %d, local idxsns_sam_main.c:sns_usam_initsns_sam_main.c:Algorithm %x has Sensor %x with Input Bin Count: %dsns_sam_main.c:Algorithm %x has Client %x with Output Bin Count: %dsns_sam_error.c:Removing algorithm %x from error queuesns_sam_error.c:Disabling SAM algorithm %xsns_sam_error.c:Unable to send error ind for %x, error: %isns_sam_error.c:Cannot create mutex %isns_sam_error.c:Sending error ind of size %d with ptr %xsns_sam_error.c:Error sending error ind for %x, error: %isns_sam_error.c:Error getting struct size for %x, error: %isns_sam_error.c:Unable to register for SMR service check: %xsns_sam_error.c:Unregistering algo %x, due to dependency %xsns_sam_client.c:Service ID check failed %isns_sam_client.c:Checking for service %isns_sam_client.c:sns_sam_client_error_cb error: %dsns_sam_client.c:sns_sam_client_init_cb %isns_sam_pm.c:Error voting for PM MIPS %isns_sam_init.c:Error initializing Prov FW %isns_sam_dep.c:Error starting dependency %x for %x. Removing algo instance.%xsns_sam_dep.c:Inform algorithm %x of min report period: %isns_sam_dep.c:Unable to send batch request %isns_sam_dep.c:New sensor available %xsns_sam_dep.c:Alerting algo %x of dependency %xsns_sam_dep.c:Updating batch period for sensor %x request %i to %dsns_sam_ind.c:Error getting Service IDsns_sam_ind.c:Flushing all outputs not sent earliersns_sam_ind.c:Error resuming client timer %isns_sam_cb.c:Sensor request not found for %xsns_sam_cb.c:Algorithm %x sending update request to %xsns_sam_cb.c:Error sending update request %isns_sam_req.c:Algorithm instance state allocated in DDR due to insufficient TCMsns_sam_req.c:Received batch request (request: %i ms)sns_sam_io.c:Exiting uImage: Exhausted TCM bins (%x)sns_sam_io.c:Exiting uImage: Unable to alloc input queue (%x)sns_sam_io.c:CB: Flush Island -> DDRsns_sam_io.c:CB: Drop unneeded Datasns_sam_prov.c:Timeout expired for %isns_sam_prov.c:Error %i initializing PROV connection %isns_sam_prov.c:QMI Service ID Lookup error %isns_sam_prov.c:SAM client check failed %isns_sam_prov.c:Error registering provider %isns_sam_prov.c:Adding new sensor %xsns_sam_prov.c:Added sensor already exists %xsns_sam_prov.c:sns_sam_prov_stop_stream %xsns_sam_algo_utils.c:ERROR: Out of bounds indPtr->Indices_len =%dsns_batchbuff.c:batchbuff free ptr error %xsns_batchbuff.c:batchbuff free ptr not found %xsns_batchbuff.c:sam heap calling callback function - heap usage %d, largest_free %d, checkCounter %d,sns_batchbuff.c:sam heap calling callback function i=%dsns_batchbuff.c:SNS_OS_SENSOR_HEAP_MALLOC failed - size %dsns_dd_mag_fifo_akm099xx.c: Entering init().sns_dd_mag_fifo_akm099xx.c: init: Failed to allocate memory space.sns_dd_mag_fifo_akm099xx.c: init: Failed to open port.sns_dd_mag_fifo_akm099xx.c: init: Failed to initialize timer.sns_dd_mag_fifo_akm099xx.c: Cannot determine device parameter (0x%02X).sns_dd_mag_fifo_akm099xx.c: init finished.sns_dd_mag_fifo_akm099xx.c: Writing RST bit failed. status=%d.sns_dd_mag_fifo_akm099xx.c: reset done.sns_dd_mag_fifo_akm099xx.c: set_attr: sensor=%d, attr=%dsns_dd_mag_fifo_akm099xx.c: Invalid ODR %d Hz was specified.sns_dd_mag_fifo_akm099xx.c: Skip because same odr (%d).sns_dd_mag_fifo_akm099xx.c: Transition to power-down mode failed.sns_dd_mag_fifo_akm099xx.c: Transition to mode (%d) failed.sns_dd_mag_fifo_akm099xx.c: ATTRIB_ODR avg_sampling_intvl Q16:%d sampling_intvl_factor Q16:%dsns_dd_mag_fifo_akm099xx.c: set_odr: odr=%d, powerstate=%d, delay=%ldsns_dd_mag_fifo_akm099xx.c: FIFO is not available on the current device.sns_dd_mag_fifo_akm099xx.c: Invalid WM was set. WM = %d.sns_dd_mag_fifo_akm099xx.c: Skip because same watermark (%d).sns_dd_mag_fifo_akm099xx.c: Transition to power-down mode failed. Status = %d.sns_dd_mag_fifo_akm099xx.c: Set to continuous mode failed. status = %d.sns_dd_mag_fifo_akm099xx.c: set_fifo: wm=%dsns_dd_mag_fifo_akm099xx.c: get_attr: sensor=%d, attr=%dsns_dd_mag_fifo_akm099xx.c: Undefined Parameter is requested.sns_dd_mag_fifo_akm099xx.c: self-test: test=%dsns_dd_mag_fifo_akm099xx.c: Transition to test mode is only from power down mode.sns_dd_mag_fifo_akm099xx.c: Requested test (test = %d) is not supported.sns_dd_mag_fifo_akm099xx.c: Port open failed. Status = %d.sns_dd_mag_fifo_akm099xx.c: Couldn't allocate memory.sns_dd_mag_fifo_akm099xx.c: enable_sched_data: sensor=%d, enable=%dsns_dd_mag_fifo_akm099xx.c: This device does not have DRDY.sns_dd_mag_fifo_akm099xx.c: Failed to read device id. status = %d.sns_dd_mag_fifo_akm099xx.c: WIA1,WIA2 = 0x%02X,0x%02X.sns_dd_mag_fifo_akm099xx.c: RSV1,RSV2 = 0x%02X,0x%02X.sns_dd_mag_fifo_akm099xx.c: Unknown company id (0x%02X).sns_dd_mag_fifo_akm099xx.c: Unknown device id (0x%02X).sns_dd_mag_fifo_akm099xx.c: sens_adj: type=%dsns_dd_mag_fifo_akm099xx.c: Writing CNTL2 failed. Status = %d.sns_dd_mag_fifo_akm099xx.c: Reading ASA* data failed. Status = %d.sns_dd_mag_fifo_akm099xx.c: ASA = 0x%02X,0x%02X,0x%02X.sns_dd_mag_fifo_akm099xx.c: clear data cachesns_dd_mag_fifo_akm099xx.c: config_powerstate: state=%dsns_dd_mag_fifo_akm099xx.c: test_self_sw:sns_dd_mag_fifo_akm099xx.c: Device reset failed. Status = %d.sns_dd_mag_fifo_akm099xx.c: test_val=%6d, %6d, %6dsns_dd_alsprx.c: set_powerstate(): odr=%d sensor=%dsns_dd_alsprx.c: Sensor ALS, Start first cycle
sns_dd_alsprx.c: sensor PS
sns_dd_alsprx.c: Set threshold ps_polling:%d
sns_dd_alsprx.c: start 1st cycle timersns_dd_alsprx.c: set_powerstate on CFG0=%x sns_dd_alsprx.c: prx_attr_query()sns_dd_alsprx.c: invalid attr_MALLOC!!sns_dd_alsprx.c: get_attr PRX device infosns_dd_alsprx.c: get_attr PRX rangesns_dd_alsprx.c: invalid attr4444!!sns_dd_alsprx.c: get_attr PRX resolution ADCsns_dd_alsprx.c: in get_attr PRX resolutionsns_dd_alsprx.c: in get_attr PRX power infosns_dd_alsprx.c: in get_attr PRX accuracysns_dd_alsprx.c: in get_attr PRX ODR %dsns_dd_alsprx.c: invalid attr!!sns_dd_alsprx.c: als_attr_query()sns_dd_alsprx.c: get_attr ALS device infosns_dd_alsprx.c: get_attr ALS rangesns_dd_alsprx.c: get_attr ALS resolution ADCsns_dd_alsprx.c: in get_attr ALS resolutionsns_dd_alsprx.c: in get_attr ALS power infosns_dd_alsprx.c: in get_attr ALS accuracysns_dd_alsprx.c: in get_attr ALS ODR %dsns_dd_alsprx.c: enable_sched_data() ,sensor = %d,enable = %dsns_dd_alsprx.c: alp.D reset()
sns_dd_alsprx.c: set_attrib() - sensor=%d attr=%dsns_dd_alsprx.c: set_attrib power mode = %dsns_dd_alsprx.c: set_attrib ADC resolutionsns_dd_alsprx.c: set_attrib ODR - %dsns_dd_alsprx.c: get_attrib() - sensor=%d attr=%dsns_dd_alsprx.c: get attrib Driver infosns_dd_alsprx.c: get attrib reg groupsns_dd_alsprx.c: copy NV itemsns_dd_alsprx.c: run_test()sns_dd_alsprx.c: In selftest sensor_proximity sns_dd_alsprx.c: In proximity factory test! sns_dd_alsprx.c: In proximity self fast test! sns_dd_alsprx.c: In ambient factory test! sns_dd_alsprx.c: In ambient self fast test! sns_dd_alsprx.c: FAILED_FACTORY_TESTsns_dd_alsprx.c: SUCCESS_FACTORY_TESTsns_dd_alsprx.c: SUCCESS_SELF_TESTsns_dd_alsprx.c: PA22A Device id:%d is error!!
sns_dd_alsprx.c: PA22A Device id:%d!!
sns_dd_alsprx.c: probe()sns_dd_alsprx.c: port open errorsns_dd_alsprx.c: Wrong ChipIDsns_dd_alsprx.c: init()sns_dd_alsprx.c: invalid paramsns_dd_alsprx.c: malloc errorsns_dd_alsprx.c: Init Mode = %d
sns_dd_alsprx.c: Failed to get device interfacesns_dd_alsprx.c: first PS cycle timer registry errorsns_dd_alsprx.c: first ALS cycle timer registry errorsns_dd_alsprx.c: polling ps timer registry errorsns_dd_alsprx.c: polling als timer registry errorsns_dd_alsprx.c: past timer enablesns_dd_alsprx.c: No registry datasns_dd_alsprx.c: Set defaults for registry datasns_dd_alsprx.c: notify system update NV itemsns_dd_alsprx.c: after notify system update NV itemsns_dd_alsprx.c: als_caliLUX=%d sns_dd_alsprx.c: als_caliADC[%d]=%d als_caliADC_IR[%d]=%d sns_dd_sx9324.c:SMTC - INITsns_dd_sx9324.c:SMTC - INIT failed to clear irq!!sns_dd_sx9324.c:SMTC - INIT SUCCESS!!sns_dd_sx9324.c:SMTC - write device error %d reg: %d data: %dsns_dd_sx9324.c:SMTC - read device error %d reg: %d data: %dsns_dd_sx9324.c:SMTC - ATTRIB_DRIVER_INFOsns_dd_sx9324.c:SMTC - ATTRIB_DEVICE_INFOsns_dd_sx9324.c:SMTC - run_test Read Reg. Failed!!! %dsns_dd_sx9324.c:SMTC - run_test Read Reg. Completed!!!sns_dd_sx9324.c:SMTC - PROBEsns_dd_sx9324.c:SMTC - PROBE open port fail!sns_dd_sx9324.c:SMTC - I'm [chipID=%x],not SX9325,I will come out!sns_dd_sx9324.c:SMTC - PROBE SUCCESS!sns_dd_sx9324.c:SMTC - enable_sched_data %dsns_dd_sx9324.c:SMTC - enable_sched_data, fail state invalidsns_dd_sx9324.c:SMTC - enable_sched_data, fail not sar sensorsns_dd_sx9324.c:SMTC - enable_sched_data, fail no interruptssns_dd_sx9324.c:SMTC - enable_sched_data endsns_dd_alsprx_silergy.c: set_powerstate(): odr=%d sensor=%dsns_dd_alsprx_silergy.c: Sensor ALS, Start first cycle
sns_dd_alsprx_silergy.c: sensor PS
sns_dd_alsprx_silergy.c: start 1st cycle timersns_dd_alsprx_silergy.c: set_powerstate on REG_CON0=%x sns_dd_alsprx_silergy.c: prx_attr_query()sns_dd_alsprx_silergy.c: invalid attr_MALLOC!!sns_dd_alsprx_silergy.c: get_attr PRX device infosns_dd_alsprx_silergy.c: get_attr PRX rangesns_dd_alsprx_silergy.c: invalid attr4444!!sns_dd_alsprx_silergy.c: get_attr PRX resolution ADCsns_dd_alsprx_silergy.c: in get_attr PRX resolutionsns_dd_alsprx_silergy.c: in get_attr PRX power infosns_dd_alsprx_silergy.c: in get_attr PRX accuracysns_dd_alsprx_silergy.c: in get_attr PRX ODR %dsns_dd_alsprx_silergy.c: invalid attr!!sns_dd_alsprx_silergy.c: als_attr_query()sns_dd_alsprx_silergy.c: get_attr ALS device infosns_dd_alsprx_silergy.c: get_attr ALS rangesns_dd_alsprx_silergy.c: get_attr ALS resolution ADCsns_dd_alsprx_silergy.c: in get_attr ALS resolutionsns_dd_alsprx_silergy.c: in get_attr ALS power infosns_dd_alsprx_silergy.c: in get_attr ALS accuracysns_dd_alsprx_silergy.c: in get_attr ALS ODR %dsns_dd_alsprx_silergy.c: enable_sched_data() ,sensor = %d,enable = %dsns_dd_alsprx_silergy.c: alp.D reset()
sns_dd_alsprx_silergy.c: set_attrib() - sensor=%d attr=%dsns_dd_alsprx_silergy.c: set_attrib power mode = %dsns_dd_alsprx_silergy.c: set_attrib ADC resolutionsns_dd_alsprx_silergy.c: set_attrib ODR - %dsns_dd_alsprx_silergy.c: get_attrib() - sensor=%d attr=%dsns_dd_alsprx_silergy.c: get attrib Driver infosns_dd_alsprx_silergy.c: get attrib reg groupsns_dd_alsprx_silergy.c: copy NV itemsns_dd_alsprx_silergy.c: run_test()sns_dd_alsprx_silergy.c: In selftest sensor_proximity sns_dd_alsprx_silergy.c: In proximity factory test! sns_dd_alsprx_silergy.c: FAILED_FACTORY_TESTsns_dd_alsprx_silergy.c: SUCCESS_FACTORY_TESTsns_dd_alsprx_silergy.c: In proximity self fast test! sns_dd_alsprx_silergy.c: SUCCESS_SELF_TESTsns_dd_alsprx_silergy.c: In ambient factory test! sns_dd_alsprx_silergy.c: In ambient self fast test! sns_dd_alsprx_silergy.c: SY3088AS Device id:%d is error! res=%d
sns_dd_alsprx_silergy.c: SY3088AS Device id:%d!!
sns_dd_alsprx_silergy.c: probe()sns_dd_alsprx_silergy.c: port open errorsns_dd_alsprx_silergy.c: Wrong ChipIDsns_dd_alsprx_silergy.c: init()sns_dd_alsprx_silergy.c: invalid paramsns_dd_alsprx_silergy.c: malloc errorsns_dd_alsprx_silergy.c: Init Mode = %d
sns_dd_alsprx_silergy.c: Failed to get device interfacesns_dd_alsprx_silergy.c: first als cycle timer registry errorsns_dd_alsprx_silergy.c: first ps cycle timer registry errorsns_dd_alsprx_silergy.c: polling ps timer registry errorsns_dd_alsprx_silergy.c: polling als timer registry errorsns_dd_alsprx_silergy.c: past timer enablesns_dd_alsprx_silergy.c: No registry datasns_dd_alsprx_silergy.c: Set defaults for registry datasns_dd_alsprx_silergy.c: notify system update NV itemsns_dd_alsprx_silergy.c: after notify system update NV itemsns_dd_alsprx_silergy.c: als_caliADC=%d sns_ddf_timer.c:obj_match - timer 0x%x idx %u changed to %usns_ddf_timer.c:start - timer 0x%x not foundsns_ddf_timer.c:cancel - timer 0x%x not foundsns_ddf_timer.c:release - timer 0x%x not foundsns_ddf_timer.c:calling callback function - heap size %d, peak heap %d, callback func num %dsns_ddf_timer.c:default heap calling callback function i=%dsns_ddf_timer.c:SNS_OS_MALLOC failed - size %dsns_ddf_timer.c:que_add - queue full!!!sns_ddf_timer.c:que_del - timer 0x%x not found!!!sns_dd_lsm6ds3.c:LSM6DS3 - sensor (%d) new_rate (%d) invalid parameterssns_dd_lsm6ds3.c:LSM6DS3 - ODR MATCH failed desired_rate (%d) STM_LSM6DS3_MAX_ODR (%d)sns_dd_lsm6ds3.c:LSM6DS3 - read_port failed- read_count does not match - read_count (%d)sns_dd_lsm6ds3.c:LSM6DS3 - Reset already done!sns_dd_lsm6ds3.c:LSM6DS3 - ESP not enabled - Init failed sensor (%d) status (%d)sns_dd_lsm6ds3.c:LSM6DS3 - cur_time (%u) now (%u) delay (%u) sns_dd_lsm6ds3.c:LSM6DS3 - reset failed status=%usns_dd_lsm6ds3_selftest.c:LSM6DS3 - Data not ready for 50ms sns_dd_lsm6ds3_selftest.c:LSM6DS3 - LSM6DS3 run test returning error - status %d %d %dsns_dd_lsm6ds3_selftest.c:LSM6DS3 - read_port failed- status (%d)sns_dd_lsm6ds3_selftest.c:LSM6DS3 - read_port failed (bytes count or WHOAMI failed)- rw_bytes (%d) rw_buffer (0x%x) WHOAMI (0x%x)sns_dd_lsm6ds3_selftest.c:LSM6DS3 - LSM6DS3 run test sensor (%d) reset failed (%d) (%d)sns_dd_lsm6ds3_selftest.c:LSM6DS3 - LSM6DS3 run test sensor (%d) set power failed (%d),(%d)sns_dd_lsm6ds3_selftest.c:LSM6DS3 - LSM6DS3 HW self test write port failed status %d %d %dsns_dd_lsm6ds3_fifo.c:LSM6DS3 - free fifo_acc_data samples failed. status=%usns_dd_lsm6ds3_fifo.c:LSM6DS3 - free fifo_temp_data samples failed. status=%usns_dd_lsm6ds3_fifo.c:LSM6DS3 - free gyr_fifo_data samples failed. status=%usns_dd_lsm6ds3_fifo.c:LSM6DS3 - ACC is not availablesns_dd_lsm6ds3_fifo.c:LSM6DS3 - free raw_buffer failed. status=%usns_dd_lsm6ds3_fifo.c:LSM6DS3 - malloc fifo_acc_data samples failed. status=%usns_dd_lsm6ds3_fifo.c:LSM6DS3 - malloc fifo_temp_data samples failed. status=%usns_dd_lsm6ds3_fifo.c:LSM6DS3 - malloc fifo_gyr_data samples failed. status=%usns_dd_lsm6ds3_fifo.c:LSM6DS3 - malloc raw_buffer failed. status=%usns_dd_lsm6ds3_fifo.c:LSM6DS3 - lsm6ds3_enable_fifo: Memory alloc failed status %d sensor %dsns_dd_mag_mmc5603nj.c:DD - odr = %dsns_dd_mag_mmc5603nj.c:ERR - invalid param !sns_dd_mag_mmc5603nj.c:DD - mmc5603nj_init sns_dd_mag_mmc5603nj.c:ERR - can't malloc memsns_dd_mag_mmc5603nj.c:ERR - can't open port, status is %dsns_dd_mag_mmc5603nj.c:ERR - can't init timer, status is %dsns_dd_mag_mmc5603nj.c:ERR - read device_id fail, status is %dsns_dd_mag_mmc5603nj.c:ERR - invalid device, id is 0x%xsns_dd_mag_mmc5603nj.c:ERR - sns_dd_mmc5603nj_reset fail, status is %dsns_dd_mag_mmc5603nj.c:DD - mmc5603nj_init donesns_dd_mag_mmc5603nj.c:DD - in mmc5603nj set, attr is %dsns_dd_mag_mmc5603nj.c:DD - set power, power state is %d (0 enable, 1 disable)sns_dd_mag_mmc5603nj.c:DD - set power, ret_val = %d (zero is OK)sns_dd_mag_mmc5603nj.c:DD - set rangesns_dd_mag_mmc5603nj.c:DD - set lowpasssns_dd_mag_mmc5603nj.c:DD - set odr, state->current_odr is %dsns_dd_mag_mmc5603nj.c:DD - in mmc5603nj set attr, do nothingsns_dd_mag_mmc5603nj.c:DD - in mmc5603nj get, attr is %dsns_dd_mag_mmc5603nj.c:DD - get attr pwr infosns_dd_mag_mmc5603nj.c:DD - get attr rangesns_dd_mag_mmc5603nj.c:DD - get attr res aDCsns_dd_mag_mmc5603nj.c:DD - bit_len %d max_freq %dsns_dd_mag_mmc5603nj.c:DD - get attr ressns_dd_mag_mmc5603nj.c:DD - get attr delaysns_dd_mag_mmc5603nj.c:DD - get attr drv infosns_dd_mag_mmc5603nj.c:DD - driver version 1sns_dd_mag_mmc5603nj.c:DD - get attr dev infosns_dd_mag_mmc5603nj.c:DD - device version 1sns_dd_mag_mmc5603nj.c:DD - get_attr ODRsns_dd_mag_mmc5603nj.c:ERR - malloc ODR memory error !sns_dd_mag_mmc5603nj.c:DD - *odr is %d **value is %dsns_dd_mag_mmc5603nj.c:DD - get_attr ODR LISTsns_dd_mag_mmc5603nj.c:DD - malloc ODR LIST memory errorsns_dd_mag_mmc5603nj.c:DD - ODR number %dsns_dd_mag_mmc5603nj.c:DD - get_attr ODR LIST %dsns_dd_mag_mmc5603nj.c:DD - in mmc5603nj get attr, do nothingsns_dd_mag_mmc5603nj.c:DD - mmc5603nj-resetsns_dd_mag_mmc5603nj.c:DD - mmc5603nj-reset donesns_dd_mag_mmc5603nj.c:DD - mmc5603nj-test insns_dd_mag_mmc5603nj.c:DD - in mmc5603nj-test donesns_dd_mag_mmc5603nj.c:DD - in mmc5603nj-test fail, because delta values are too small %d %d %dsns_dd_mag_mmc5603nj.c:DD - mmc5603j_probe, entrysns_dd_mag_mmc5603nj.c:ERR - in mmc5603j_probe, open_port fail, status is %dsns_dd_mag_mmc5603nj.c:ERR - in mmc5603j_probe, read_port fail, status is %dsns_dd_mag_mmc5603nj.c:ERR - in mmc5603j_probe, this is not mmc5603nj, status is %dsns_dd_mag_mmc5603nj.c:ERR - in mmc5603j_probe, can't malloc mem, status is %dsns_dd_mag_mmc5603nj.c:DD - mmc5603nj_probe, donesns_dd_icm206xx_base_driver.c:INVN - chip_read_id(whoami = %#X)sns_dd_icm206xx_base_driver.c:INVN - chip_read_id(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_soft_reset(pwr_mgmt_1 = %#X).
sns_dd_icm206xx_base_driver.c:INVN - chip_soft_reset(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_power_mode(power_mode = %#X, asleep = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_power_mode(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_dis_i2c_if(i2c_if = %#X, i2c_if_dis = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_dis_i2c_if(user_control = %#X, i2c_if_dis = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_dis_i2c_if(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_clk_source(pwr_mgmt_1 = %#X, selected clock source = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_clk_source(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_config_intosc(product = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_config_intosc(cfg_user_bank = %#X, intosc = %#X).
sns_dd_icm206xx_base_driver.c:INVN - chip_config_intosc(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_enable_ois(ois_enable = %#X).
sns_dd_icm206xx_base_driver.c:INVN - chip_enable_ois(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_enable_dri(interrupt enable = %#X).
sns_dd_icm206xx_base_driver.c:INVN - chip_enable_dri(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_sample_rate_divider(div = %#X).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_sample_rate_divider(error = %d, div = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_enable_fifo_access(enable = %d, user_control = %#X).
sns_dd_icm206xx_base_driver.c:INVN - chip_enable_fifo_access(error = %d, enable = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_start_fifo(en_acc = %d, en_gyro = %d, fifo_enable = %#X).
sns_dd_icm206xx_base_driver.c:INVN - chip_start_fifo(error = %d, en_acc = %d, en_gyro = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_fifo_size(acc_cfg_2 = %#X, max_fifo_size index = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_fifo_size(error = %d, max_fifo_size index = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_fifo_wm_threshold(wm_th = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_fifo_wm_threshold(error = %d, wm_th = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_enable_fifo_overflow_int(interrupt enable = %#X, enable = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_enable_fifo_overflow_int(error = %d, enable = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_fifo_mode(cfg = %#X, mode = %#X).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_fifo_mode(error = %d, mode = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_fifo_count_mode(cfg = %#X, mode = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_fifo_count_mode(error = %d, mode = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_enable_wom(wom enable = %#X).
sns_dd_icm206xx_base_driver.c:INVN - chip_enable_wom(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_enable_acc_intel_crtl(acc_intel_ctrl = %#X).
sns_dd_icm206xx_base_driver.c:INVN - chip_enable_acc_intel_crtl(error = %d, acc_intel_ctrl = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_wom_threshold(threshold = %d mg).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_wom_threshold(error = %d, threshold = %d mg).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_acc_lp_odr_ctrl(acc_lp_odr = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_acc_lp_odr_ctrl(error = %d, acc_lp_odr = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_gyro_lp_average_num(gyro_avg = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_gyro_lp_average_num(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_gyro_lp_mode(lp_mode_ctrl = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_gyro_lp_mode(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_acc_fsr(acc_cfg = %#X, range = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_acc_fsr(error = %d, range = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_ois_acc_fsr(acc_cfg = %#X, range = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_ois_acc_fsr(error = %d, range = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_acc_lp_average_num(acc_avg = %#X, avg = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_acc_lp_average_num(error = %d, avg = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_acc_filter(acc_cfg_2 = %#X, filter = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_acc_filter(error = %d, filter = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_gyro_fsr(gyro_cfg = %#X, range = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_gyro_fsr(error = %d, range = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_ois_gyro_fsr(signal_path_reset = %#X, range = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_ois_gyro_fsr(error = %d, range = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_gyro_filter(cfg = %#X, filter = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_gyro_filter(error = %d, filter = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_init_ois_odr(acc_intel_ctrl = %#X, signal_path_reset = %#X).
sns_dd_icm206xx_base_driver.c:INVN - chip_init_ois_odr(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_enable_sensor(sensor = %d, enable = %d, pre_enable = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_enable_sensor(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_start_fifo(en_acc = %d, en_gyro = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_start_fifo(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_enable_fifo_wm_int(wm_th = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_enable_fifo_wm_int(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_enable_fifo_overflow_int(enable = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_enable_fifo_overflow_int(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip selftest start...sns_dd_icm206xx_base_driver.c:INVN - inv_chip_selftest(error=%d).sns_dd_icm206xx_base_driver.c:INVN - chip selftest finished(test_result = %d)sns_dd_icm206xx_base_driver.c:INVN - inv_enable_dri(enable = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_enable_dri(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_enable_wom(enable = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_enable_wom(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_set_fsr(sensor = %d, fsr_sel = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_set_fsr(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_set_filter(sensor = %d, filter = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_set_filter(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_set_odr(odr = %d).
sns_dd_icm206xx_base_driver.c:INVN - inv_set_odr - ODR is out of rangesns_dd_icm206xx_base_driver.c:INVN - inv_set_odr(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_enable_sensor(pwr_mgmt_2 = %#X).
sns_dd_icm206xx_base_driver.c:INVN - chip_enable_sensor(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_setup_selftest(error=%d).sns_dd_icm206xx_base_driver.c:INVN - chip_read_st_code(acc[%d,%d,%d]).
sns_dd_icm206xx_base_driver.c:INVN - chip_read_st_code(gyro[%d,%d,%d]).
sns_dd_icm206xx_base_driver.c:INVN - chip_read_st_code(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_do_test_acc(error=%d).sns_dd_icm206xx_base_driver.c:INVN - chip_set_acc_selftest(acc_cfg = %#X).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_acc_selftest(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - chip_do_test_gyro(error=%d).sns_dd_icm206xx_base_driver.c:INVN - chip_set_gyro_selftest(gyro_cfg = %#X).
sns_dd_icm206xx_base_driver.c:INVN - chip_set_gyro_selftest(error = %d).
sns_dd_icm206xx_base_driver.c:INVN - self test code is zerosns_dd_icm206xx_base_driver.c:INVN - ACC Fail@Criteria A(<MIN): st_shift_cust[%d] = %d, st_otp[%d] = %dsns_dd_icm206xx_base_driver.c:INVN - ACC Fail@Criteria A(>MAX): st_shift_cust[%d] = %d, st_otp[%d] = %dsns_dd_icm206xx_base_driver.c:INVN - ACC Fail@Criteria B(<MIN): st_shift_cust[%d] = %dsns_dd_icm206xx_base_driver.c:INVN - ACC Fail@Criteria B(>MAX): st_shift_cust[%d] = %dsns_dd_icm206xx_base_driver.c:INVN - GYRO Fail@Criteria A: st_shift_cust[%d] = %d, st_otp[%d] = %dsns_dd_icm206xx_base_driver.c:INVN - GYRO Fail@Criteria B: st_shift_cust[%d] = %dsns_dd_icm206xx_base_driver.c:INVN - GYRO Fail@Criteria C: gyro[%d] = %dsns_dd_icm206xx.c:INVN - sub devices id[acc:%d,gyro:%d,ois_acc:%d,ois_gyro:%d]sns_dd_icm206xx.c:INVN - sns_dd_icm206xx_reset - enter sub_dev_id = %dsns_dd_icm206xx.c:INVN - sub device acc is activesns_dd_icm206xx.c:INVN - sub device gyro is activesns_dd_icm206xx.c:INVN - sub device ois acc is activesns_dd_icm206xx.c:INVN - sub device ois gyro is activesns_dd_icm206xx.c:INVN - motion detect sensor is activesns_dd_icm206xx.c:INVN - sensor is active(acc enabled:%d, gyro enabled:%d)sns_dd_icm206xx.c:INVN - resetting sensor devicesns_dd_icm206xx.c:INVN - sns_dd_icm206xx_reset - exitsns_dd_icm206xx.c:INVN - sns_dd_icm206xx_init - entersns_dd_icm206xx.c:INVN - malloc failedsns_dd_icm206xx.c:INVN - slave address=%#Xsns_dd_icm206xx.c:INVN - I2C open failedsns_dd_icm206xx.c:INVN - init - unable to initialize any sensorssns_dd_icm206xx.c:INVN - init - set sub device id failedsns_dd_icm206xx.c:INVN - init - failed to get axes map(error = %d)sns_dd_icm206xx.c:INVN - init - reset device failedsns_dd_icm206xx.c:INVN - out of sub-device slotssns_dd_icm206xx.c:INVN - sns_dd_icm206xx_init - exitsns_dd_icm206xx.c:INVN - sns_dd_icm206xx_set_attrib - enter sensor = %d, sub_dev_id = %d, attrib = %d, value = %dsns_dd_icm206xx.c:INVN - sns_dd_icm206xx_set_attrib - set attribute failed(ret: %d)sns_dd_icm206xx.c:INVN - sns_dd_icm206xx_set_attrib - register gpio for INT failedsns_dd_icm206xx.c:INVN - sns_dd_icm206xx_get_attrib - enter sensor = %d, attrib = %d, sub_dev_id = %dsns_dd_icm206xx.c:INVN - SNS_DDF_ATTRIB_BIAS - get bias(%d, %d, %d)sns_dd_icm206xx.c:INVN - Invalid sensor type for SNS_DDF_ATTRIB_BIASsns_dd_icm206xx.c:INVN - ODR memory errorsns_dd_icm206xx.c:INVN - sns_dd_icm206xx_enable_sched_data - enter (sensor = %d, enable = %d)sns_dd_icm206xx.c:INVN - sns_dd_icm206xx_enable_sched_data - sub device hasn't been fully initialized yet.(acc id:%d, gyro id:%d)sns_dd_icm206xx.c:INVN - sns_dd_icm206xx_enable_sched_data - register gpio for INT failedsns_dd_icm206xx.c:INVN - disable sched(%d)sns_dd_icm206xx.c:INVN - sns_dd_icm206xx_run_test entered
sns_dd_icm206xx.c:INVN - sns_dd_icm206xx_process_daf_req entered
sns_dd_icm206xx.c:INVN - sns_dd_icm206xx_cancel_daf_trans entered
sns_dd_icm206xx.c:INVN - sns_dd_icm206xx_probe - entersns_dd_icm206xx.c:INVN - sns_dd_icm206xx_probe(whoami = %#X)sns_dd_icm206xx.c:INVN - InvenSense Driver Version:%d.%d.%d-rc%dsns_dd_icm206xx.c:INVN - InvenSense Driver Version:%d.%d.%dsns_dd_icm206xx.c:INVN - sns_dd_fill_sub_dev_slot(sensor:%d, sub device slot index:%d)sns_dd_icm206xx.c:INVN - sub_dev_acc_id = %dsns_dd_icm206xx.c:INVN - sub_dev_gyro_id = %dsns_dd_icm206xx.c:INVN - sub_dev_ois_acc_id = %dsns_dd_icm206xx.c:INVN - sub_dev_ois_gyro_id = %dsns_dd_icm206xx.c:INVN - acc axis index: %d, %d, %d
sns_dd_icm206xx.c:INVN - acc axis sign: %d, %d, %d
sns_dd_icm206xx.c:INVN - gyro axis index: %d, %d, %d
sns_dd_icm206xx.c:INVN - gyro axis sign: %d, %d, %d
sns_dd_icm206xx.c:INVN - sns_dd_set_odr - enter (sensor = %d, odr = %d)sns_dd_icm206xx.c:INVN - sns_dd_set_odr - sub device hasn't been fully initialized yet.(acc id:%d, gyro id:%d)sns_dd_icm206xx.c:INVN - unknown sensor type! (sensor_type:%d)sns_dd_icm206xx.c:INVN - sns_dd_enable_fifo - enter (en_acc = %d, en_gyro = %d, odr = %d)sns_dd_icm206xx.c:INVN - sns_dd_enable_fifo - sub device hasn't been fully initialized yet.(acc id:%d, gyro id:%d)sns_dd_icm206xx.c:INVN - sns_dd_enable_fifo - device doesn't support FIFO!sns_dd_icm206xx.c:INVN - sns_dd_set_fifo - enter (sensor = %d, watermark = %d)sns_dd_icm206xx.c:INVN - sns_dd_set_fifo - sub device hasn't been fully initialized yet.(acc id:%d, gyro id:%d)sns_dd_icm206xx.c:INVN - sns_dd_set_fifo - device doesn't support FIFO!sns_dd_icm206xx.c:INVN - sns_dd_set_pwr_mode - invalid parameter!sns_dd_icm206xx.c:INVN - sns_dd_enable_interrupt_pin - enter (sensor = %d, enable = %d)sns_dd_icm206xx.c:INVN - sns_dd_enable_interrupt_pin - sub device hasn't been fully initialized yet.(acc id:%d, gyro id:%d)sns_dd_icm206xx.c:INVN - Interrupt pin configuration for sensor(%d) is absentsns_dd_icm206xx.c:INVN - sns_dd_enable_interrupt_pin(error = %d)sns_dd_icm206xx.c:INVN - sns_dd_run_inertial_test - enter(sensor = %d)sns_dd_icm206xx.c:INVN - sns_dd_inertial_test_notify - enter (sensor = %d, status = %d, err = %d)sns_dd_icm206xx.c:INVN - err != SNS_DD_ITEST_ZERO_VARIANCE err = %dsns_dd_icm206xx.c:INVN - err == SNS_DD_ITEST_ZERO_VARIANCEsns_dd_icm206xx.c:INVN - Notify SMGR that bias is ready(bias:%d, %d, %d)sns_dd_icm206xx.c:INVN - sns_dd_inertial_test_notify - exit