From 2ea347572c141cafe9dbd47825b3886e7b8f731b Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Fri, 26 Jan 2024 17:27:08 +0000 Subject: [PATCH] kernel: add driver for Airoha EN8811H PHY as module Add PHY driver for Airoha EN8811H PHY and package it as kernel module. The PHY needs to load firmware from rootfs, so there is no point in having the driver built-into the kernel. Signed-off-by: Daniel Golle --- package/kernel/linux/modules/netdevices.mk | 17 + .../700-swconfig_switch_drivers.patch | 2 +- ...ha-Add-the-Airoha-EN8811H-PHY-driver.patch | 1024 +++++++++++++++++ .../500-gsw-rtl8367s-mt7622-support.patch | 4 +- ...er-for-MediaTek-SoC-built-in-GE-PHYs.patch | 4 +- ...phy-add-driver-for-MediaTek-2.5G-PHY.patch | 4 +- 6 files changed, 1048 insertions(+), 7 deletions(-) create mode 100644 target/linux/generic/pending-6.1/750-net-phy-airoha-Add-the-Airoha-EN8811H-PHY-driver.patch diff --git a/package/kernel/linux/modules/netdevices.mk b/package/kernel/linux/modules/netdevices.mk index 63f75e959145b2..72504d8de7f4b6 100644 --- a/package/kernel/linux/modules/netdevices.mk +++ b/package/kernel/linux/modules/netdevices.mk @@ -375,6 +375,23 @@ endef $(eval $(call KernelPackage,phy-smsc)) +define KernelPackage/phy-airoha-en8811h + SUBMENU:=$(NETWORK_DEVICES_MENU) + TITLE:=Airoha EN8811H 2.5G Ethernet PHY + DEPENDS:=+airoha-en8811h-firmware +kmod-libphy @LINUX_6_1 + KCONFIG:=CONFIG_AIR_EN8811H_PHY + FILES:= \ + $(LINUX_DIR)/drivers/net/phy/air_en8811h.ko + AUTOLOAD:=$(call AutoLoad,18,air_en8811h,1) +endef + +define KernelPackage/phy-airoha-en8811h/description + Kernel modules for Airoha EN8811H 2.5G Ethernet PHY +endef + +$(eval $(call KernelPackage,phy-airoha-en8811h)) + + define KernelPackage/phy-aquantia SUBMENU:=$(NETWORK_DEVICES_MENU) TITLE:=Aquantia Ethernet PHYs diff --git a/target/linux/generic/hack-6.1/700-swconfig_switch_drivers.patch b/target/linux/generic/hack-6.1/700-swconfig_switch_drivers.patch index 5f49678a34b979..a50fb20e3f5885 100644 --- a/target/linux/generic/hack-6.1/700-swconfig_switch_drivers.patch +++ b/target/linux/generic/hack-6.1/700-swconfig_switch_drivers.patch @@ -92,7 +92,7 @@ Signed-off-by: Felix Fietkau + comment "MII PHY device drivers" - config AMD_PHY + config AIR_EN8811H_PHY --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -24,6 +24,21 @@ libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_ diff --git a/target/linux/generic/pending-6.1/750-net-phy-airoha-Add-the-Airoha-EN8811H-PHY-driver.patch b/target/linux/generic/pending-6.1/750-net-phy-airoha-Add-the-Airoha-EN8811H-PHY-driver.patch new file mode 100644 index 00000000000000..38bb52f10b458f --- /dev/null +++ b/target/linux/generic/pending-6.1/750-net-phy-airoha-Add-the-Airoha-EN8811H-PHY-driver.patch @@ -0,0 +1,1024 @@ +From 981fe7877af366e6c2820cb10da0cce08087969a Mon Sep 17 00:00:00 2001 +From: Eric Woudstra +Date: Sat, 4 Nov 2023 14:30:14 +0100 +Subject: [PATCH] net: phy: airoha: Add the Airoha EN8811H PHY driver + + * Source originated from airoha's en8811h v1.2.1 driver + * Moved air_en8811h.h to air_en8811h.c + * Removed air_pbus_reg_write() as it writes to another device on mdio-bus + * Load firmware from /lib/firmware/airoha/ instead of /lib/firmware/ + * Added .get_rate_matching() + * Use generic phy_read/write() and phy_read/write_mmd() + * Edited .get_features() to use generic C45 functions + * Edited .config_aneg() and .read_status() to use a mix of generic C22/C45 + * Use led handling functions from mediatek-ge-soc.c + * Simplified led handling by storing led rules + * Cleanup macro definitions + * Cleanup code to pass checkpatch.pl + * General code cleanup + * include fixes from RFC Patch + * use genphy_update_link as recommended by datasheet +--- + drivers/net/phy/Kconfig | 5 + + drivers/net/phy/Makefile | 1 + + drivers/net/phy/air_en8811h.c | 970 ++++++++++++++++++++++++++++++++++ + 3 files changed, 976 insertions(+) + create mode 100644 drivers/net/phy/air_en8811h.c + +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -71,6 +71,11 @@ config SFP + + comment "MII PHY device drivers" + ++config AIR_EN8811H_PHY ++ tristate "Airoha EN8811H 2.5 Gigabit PHY" ++ help ++ Currently supports the Airoha EN8811H PHY. ++ + config AMD_PHY + tristate "AMD and Altima PHYs" + help +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -32,6 +32,7 @@ obj-y += $(sfp-obj-y) $(sfp-obj-m) + + obj-$(CONFIG_ADIN_PHY) += adin.o + obj-$(CONFIG_ADIN1100_PHY) += adin1100.o ++obj-$(CONFIG_AIR_EN8811H_PHY) += air_en8811h.o + obj-$(CONFIG_AMD_PHY) += amd.o + obj-$(CONFIG_AQUANTIA_PHY) += aquantia/ + obj-$(CONFIG_AT803X_PHY) += at803x.o +--- /dev/null ++++ b/drivers/net/phy/air_en8811h.c +@@ -0,0 +1,970 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * Driver for Airoha Ethernet PHYs ++ * ++ * Currently supporting the EN8811H. ++ * ++ * Limitations of the EN8811H: ++ * - Forced speed (AN off) is not supported by hardware (!00Mbps) ++ * - Hardware does not report link-partner 2500Base-T advertisement ++ * ++ * Source originated from airoha's en8811h.c and en8811h.h v1.2.1 ++ * ++ * Copyright (C) 2023 Airoha Technology Corp. ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#define EN8811H_PHY_ID 0x03a2a411 ++ ++#define EN8811H_MD32_DM "airoha/EthMD32.dm.bin" ++#define EN8811H_MD32_DSP "airoha/EthMD32.DSP.bin" ++ ++#define AIR_FW_ADDR_DM 0x00000000 ++#define AIR_FW_ADDR_DSP 0x00100000 ++ ++ ++/* u32 (DWORD) component macros */ ++#define LOWORD(d) ((u16)(u32)(d)) ++#define HIWORD(d) ((u16)(((u32)(d)) >> 16)) ++ ++/* MII Registers */ ++#define AIR_SPEED_STATUS_REFCLK 0x1d ++#define AIR_SPEED_STATUS_REFCLK_MASK GENMASK(4, 2) ++#define AIR_SPEED_STATUS_REFCLK_100 0x4 ++#define AIR_SPEED_STATUS_REFCLK_1000 0x8 ++#define AIR_SPEED_STATUS_REFCLK_2500 0xc ++ ++#define AIR_EXT_PAGE_ACCESS 0x1f ++#define AIR_PHY_PAGE_STANDARD 0x0000 ++#define AIR_PHY_PAGE_EXTENDED_4 0x0004 ++ ++/* MII Registers Page 4*/ ++#define AIR_PBUS_MODE 0x10 ++#define AIR_PBUS_MODE_ADDR_FIXED 0x0000 ++#define AIR_PBUS_MODE_ADDR_INCR BIT(15) ++#define AIR_PBUS_WR_ADDR_HIGH 0x11 ++#define AIR_PBUS_WR_ADDR_LOW 0x12 ++#define AIR_PBUS_WR_DATA_HIGH 0x13 ++#define AIR_PBUS_WR_DATA_LOW 0x14 ++#define AIR_PBUS_RD_ADDR_HIGH 0x15 ++#define AIR_PBUS_RD_ADDR_LOW 0x16 ++#define AIR_PBUS_RD_DATA_HIGH 0x17 ++#define AIR_PBUS_RD_DATA_LOW 0x18 ++ ++/* Registers on MDIO_MMD_VEND1 */ ++#define EN8811H_PHY_FW_STATUS 0x8009 ++#define EN8811H_PHY_READY 0x02 ++ ++#define AIR_PHY_HOST_CMD_1 0x800c ++#define AIR_PHY_HOST_CMD_1_MODE1 0x0 ++#define AIR_PHY_HOST_CMD_2 0x800d ++#define AIR_PHY_HOST_CMD_2_MODE1 0x0 ++#define AIR_PHY_HOST_CMD_3 0x800e ++#define AIR_PHY_HOST_CMD_3_MODE1 0x1101 ++#define AIR_PHY_HOST_CMD_3_INTCLR 0x1100 ++#define AIR_PHY_HOST_CMD_4 0x800f ++#define AIR_PHY_HOST_CMD_4_MODE1 0x0002 ++#define AIR_PHY_HOST_CMD_4_INTCLR 0x00e4 ++ ++/* Registers on MDIO_MMD_VEND2 */ ++#define AIR_PHY_LED_BCR 0x021 ++#define AIR_PHY_LED_BCR_MODE_MASK GENMASK(1, 0) ++#define AIR_PHY_LED_BCR_TIME_TEST BIT(2) ++#define AIR_PHY_LED_BCR_CLK_EN BIT(3) ++#define AIR_PHY_LED_BCR_EXT_CTRL BIT(15) ++ ++#define AIR_PHY_LED_DUR_ON 0x022 ++ ++#define AIR_PHY_LED_DUR_BLINK 0x023 ++ ++#define AIR_PHY_LED_ON(i) (0x024 + ((i) * 2)) ++#define AIR_PHY_LED_ON_MASK (GENMASK(6, 0) | BIT(8)) ++#define AIR_PHY_LED_ON_LINK1000 BIT(0) ++#define AIR_PHY_LED_ON_LINK100 BIT(1) ++#define AIR_PHY_LED_ON_LINK10 BIT(2) ++#define AIR_PHY_LED_ON_LINKDOWN BIT(3) ++#define AIR_PHY_LED_ON_FDX BIT(4) /* Full duplex */ ++#define AIR_PHY_LED_ON_HDX BIT(5) /* Half duplex */ ++#define AIR_PHY_LED_ON_FORCE_ON BIT(6) ++#define AIR_PHY_LED_ON_LINK2500 BIT(8) ++#define AIR_PHY_LED_ON_POLARITY BIT(14) ++#define AIR_PHY_LED_ON_ENABLE BIT(15) ++ ++#define AIR_PHY_LED_BLINK(i) (0x025 + ((i) * 2)) ++#define AIR_PHY_LED_BLINK_1000TX BIT(0) ++#define AIR_PHY_LED_BLINK_1000RX BIT(1) ++#define AIR_PHY_LED_BLINK_100TX BIT(2) ++#define AIR_PHY_LED_BLINK_100RX BIT(3) ++#define AIR_PHY_LED_BLINK_10TX BIT(4) ++#define AIR_PHY_LED_BLINK_10RX BIT(5) ++#define AIR_PHY_LED_BLINK_COLLISION BIT(6) ++#define AIR_PHY_LED_BLINK_RX_CRC_ERR BIT(7) ++#define AIR_PHY_LED_BLINK_RX_IDLE_ERR BIT(8) ++#define AIR_PHY_LED_BLINK_FORCE_BLINK BIT(9) ++#define AIR_PHY_LED_BLINK_2500TX BIT(10) ++#define AIR_PHY_LED_BLINK_2500RX BIT(11) ++ ++/* Registers on BUCKPBUS */ ++ ++#define EN8811H_FW_VERSION 0x3b3c ++ ++#define EN8811H_POLARITY 0xca0f8 ++#define EN8811H_POLARITY_TX_NORMAL BIT(0) ++#define EN8811H_POLARITY_RX_REVERSE BIT(1) ++ ++#define EN8811H_GPIO_OUTPUT 0xcf8b8 ++#define EN8811H_GPIO_OUTPUT_345 (BIT(3) | BIT(4) | BIT(5)) ++ ++#define EN8811H_FW_CTRL_1 0x0f0018 ++#define EN8811H_FW_CTRL_1_START 0x0 ++#define EN8811H_FW_CTRL_1_FINISH 0x1 ++#define EN8811H_FW_CTRL_2 0x800000 ++#define EN8811H_FW_CTRL_2_LOADING BIT(11) ++ ++#define EN8811H_LED_COUNT 3 ++ ++/* GPIO5 <-> BASE_T_LED0 ++ * GPIO4 <-> BASE_T_LED1 ++ * GPIO3 <-> BASE_T_LED2 ++ * ++ * Default setup suitable for 2 leds connected: ++ * 100M link up triggers led0, only led0 blinking on traffic ++ * 1000M link up triggers led1, only led1 blinking on traffic ++ * 2500M link up triggers led0 and led1, both blinking on traffic ++ * Also suitable for 1 led connected: ++ * any link up triggers led2 ++ */ ++#define AIR_DEFAULT_TRIGGER_LED0 (BIT(TRIGGER_NETDEV_LINK_2500) | \ ++ BIT(TRIGGER_NETDEV_LINK_100) | \ ++ BIT(TRIGGER_NETDEV_RX) | \ ++ BIT(TRIGGER_NETDEV_TX)) ++#define AIR_DEFAULT_TRIGGER_LED1 (BIT(TRIGGER_NETDEV_LINK_2500) | \ ++ BIT(TRIGGER_NETDEV_LINK_1000) | \ ++ BIT(TRIGGER_NETDEV_RX) | \ ++ BIT(TRIGGER_NETDEV_TX)) ++#define AIR_DEFAULT_TRIGGER_LED2 BIT(TRIGGER_NETDEV_LINK) ++ ++struct led { ++ unsigned long rules; ++ unsigned long state; ++}; ++ ++struct en8811h_priv { ++ struct led led[EN8811H_LED_COUNT]; ++}; ++ ++enum { ++ AIR_PHY_LED_STATE_FORCE_ON, ++ AIR_PHY_LED_STATE_FORCE_BLINK, ++}; ++ ++enum { ++ AIR_PHY_LED_DUR_BLINK_32M, ++ AIR_PHY_LED_DUR_BLINK_64M, ++ AIR_PHY_LED_DUR_BLINK_128M, ++ AIR_PHY_LED_DUR_BLINK_256M, ++ AIR_PHY_LED_DUR_BLINK_512M, ++ AIR_PHY_LED_DUR_BLINK_1024M, ++}; ++ ++enum { ++ AIR_LED_DISABLE, ++ AIR_LED_ENABLE, ++}; ++ ++enum { ++ AIR_ACTIVE_LOW, ++ AIR_ACTIVE_HIGH, ++}; ++ ++enum { ++ AIR_LED_MODE_DISABLE, ++ AIR_LED_MODE_USER_DEFINE, ++}; ++ ++#define AIR_PHY_LED_DUR_UNIT 1024 ++#define AIR_PHY_LED_DUR (AIR_PHY_LED_DUR_UNIT << AIR_PHY_LED_DUR_BLINK_64M) ++ ++static const unsigned long en8811h_led_trig = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) | ++ BIT(TRIGGER_NETDEV_LINK) | ++ BIT(TRIGGER_NETDEV_LINK_10) | ++ BIT(TRIGGER_NETDEV_LINK_100) | ++ BIT(TRIGGER_NETDEV_LINK_1000) | ++ BIT(TRIGGER_NETDEV_LINK_2500) | ++ BIT(TRIGGER_NETDEV_RX) | ++ BIT(TRIGGER_NETDEV_TX)); ++ ++static int air_phy_read_page(struct phy_device *phydev) ++{ ++ return __phy_read(phydev, AIR_EXT_PAGE_ACCESS); ++} ++ ++static int air_phy_write_page(struct phy_device *phydev, int page) ++{ ++ return __phy_write(phydev, AIR_EXT_PAGE_ACCESS, page); ++} ++ ++static int __air_buckpbus_reg_write(struct phy_device *phydev, ++ u32 pbus_address, u32 pbus_data) ++{ ++ int ret; ++ ++ ret = __phy_write(phydev, AIR_PBUS_MODE, AIR_PBUS_MODE_ADDR_FIXED); ++ if (ret < 0) ++ return ret; ++ ++ ret = __phy_write(phydev, AIR_PBUS_WR_ADDR_HIGH, HIWORD(pbus_address)); ++ if (ret < 0) ++ return ret; ++ ++ ret = __phy_write(phydev, AIR_PBUS_WR_ADDR_LOW, LOWORD(pbus_address)); ++ if (ret < 0) ++ return ret; ++ ++ ret = __phy_write(phydev, AIR_PBUS_WR_DATA_HIGH, HIWORD(pbus_data)); ++ if (ret < 0) ++ return ret; ++ ++ ret = __phy_write(phydev, AIR_PBUS_WR_DATA_LOW, LOWORD(pbus_data)); ++ if (ret < 0) ++ return ret; ++ ++ return 0; ++} ++ ++static int air_buckpbus_reg_write(struct phy_device *phydev, ++ u32 pbus_address, u32 pbus_data) ++{ ++ int ret, saved_page; ++ ++ saved_page = phy_select_page(phydev, AIR_PHY_PAGE_EXTENDED_4); ++ ++ ret = __air_buckpbus_reg_write(phydev, pbus_address, pbus_data); ++ if (ret < 0) ++ phydev_err(phydev, "%s 0x%08x failed: %d\n", __func__, ++ pbus_address, ret); ++ ++ return phy_restore_page(phydev, saved_page, ret); ++; ++} ++ ++static int __air_buckpbus_reg_read(struct phy_device *phydev, ++ u32 pbus_address, u32 *pbus_data) ++{ ++ int pbus_data_low, pbus_data_high; ++ int ret; ++ ++ ret = __phy_write(phydev, AIR_PBUS_MODE, AIR_PBUS_MODE_ADDR_FIXED); ++ if (ret < 0) ++ return ret; ++ ++ ret = __phy_write(phydev, AIR_PBUS_RD_ADDR_HIGH, HIWORD(pbus_address)); ++ if (ret < 0) ++ return ret; ++ ++ ret = __phy_write(phydev, AIR_PBUS_RD_ADDR_LOW, LOWORD(pbus_address)); ++ if (ret < 0) ++ return ret; ++ ++ pbus_data_high = __phy_read(phydev, AIR_PBUS_RD_DATA_HIGH); ++ if (pbus_data_high < 0) ++ return ret; ++ ++ pbus_data_low = __phy_read(phydev, AIR_PBUS_RD_DATA_LOW); ++ if (pbus_data_low < 0) ++ return ret; ++ ++ *pbus_data = (u16)pbus_data_low | ((u32)(u16)pbus_data_high << 16); ++ return 0; ++} ++ ++static int air_buckpbus_reg_read(struct phy_device *phydev, ++ u32 pbus_address, u32 *pbus_data) ++{ ++ int ret, saved_page; ++ ++ saved_page = phy_select_page(phydev, AIR_PHY_PAGE_EXTENDED_4); ++ ++ ret = __air_buckpbus_reg_read(phydev, pbus_address, pbus_data); ++ if (ret < 0) ++ phydev_err(phydev, "%s 0x%08x failed: %d\n", __func__, ++ pbus_address, ret); ++ ++ return phy_restore_page(phydev, saved_page, ret); ++} ++ ++static int __air_write_buf(struct phy_device *phydev, u32 address, ++ const struct firmware *fw) ++{ ++ unsigned int offset; ++ int ret; ++ u16 val; ++ ++ ret = __phy_write(phydev, AIR_PBUS_MODE, AIR_PBUS_MODE_ADDR_INCR); ++ if (ret < 0) ++ return ret; ++ ++ ret = __phy_write(phydev, AIR_PBUS_WR_ADDR_HIGH, HIWORD(address)); ++ if (ret < 0) ++ return ret; ++ ++ ret = __phy_write(phydev, AIR_PBUS_WR_ADDR_LOW, LOWORD(address)); ++ if (ret < 0) ++ return ret; ++ ++ for (offset = 0; offset < fw->size; offset += 4) { ++ val = get_unaligned_le16(&fw->data[offset + 2]); ++ ret = __phy_write(phydev, AIR_PBUS_WR_DATA_HIGH, val); ++ if (ret < 0) ++ return ret; ++ ++ val = get_unaligned_le16(&fw->data[offset]); ++ ret = __phy_write(phydev, AIR_PBUS_WR_DATA_LOW, val); ++ if (ret < 0) ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int air_write_buf(struct phy_device *phydev, u32 address, ++ const struct firmware *fw) ++{ ++ int ret, saved_page; ++ ++ saved_page = phy_select_page(phydev, AIR_PHY_PAGE_EXTENDED_4); ++ ++ ret = __air_write_buf(phydev, address, fw); ++ if (ret < 0) ++ phydev_err(phydev, "%s 0x%08x failed: %d\n", __func__, ++ address, ret); ++ ++ return phy_restore_page(phydev, saved_page, ret); ++} ++ ++static int en8811h_load_firmware(struct phy_device *phydev) ++{ ++ struct device *dev = &phydev->mdio.dev; ++ const struct firmware *fw1, *fw2; ++ unsigned int pbus_value; ++ int ret; ++ ++ ret = request_firmware_direct(&fw1, EN8811H_MD32_DM, dev); ++ if (ret < 0) ++ return ret; ++ ++ ret = request_firmware_direct(&fw2, EN8811H_MD32_DSP, dev); ++ if (ret < 0) ++ goto en8811h_load_firmware_rel1; ++ ++ ret = air_buckpbus_reg_write(phydev, EN8811H_FW_CTRL_1, ++ EN8811H_FW_CTRL_1_START); ++ if (ret < 0) ++ goto en8811h_load_firmware_out; ++ ++ ret = air_buckpbus_reg_read(phydev, EN8811H_FW_CTRL_2, &pbus_value); ++ if (ret < 0) ++ goto en8811h_load_firmware_out; ++ pbus_value |= EN8811H_FW_CTRL_2_LOADING; ++ ret = air_buckpbus_reg_write(phydev, EN8811H_FW_CTRL_2, pbus_value); ++ if (ret < 0) ++ goto en8811h_load_firmware_out; ++ ++ ret = air_write_buf(phydev, AIR_FW_ADDR_DM, fw1); ++ if (ret < 0) ++ goto en8811h_load_firmware_out; ++ ++ ret = air_write_buf(phydev, AIR_FW_ADDR_DSP, fw2); ++ if (ret < 0) ++ goto en8811h_load_firmware_out; ++ ++ ret = air_buckpbus_reg_read(phydev, EN8811H_FW_CTRL_2, &pbus_value); ++ if (ret < 0) ++ goto en8811h_load_firmware_out; ++ pbus_value &= ~EN8811H_FW_CTRL_2_LOADING; ++ ret = air_buckpbus_reg_write(phydev, EN8811H_FW_CTRL_2, pbus_value); ++ if (ret < 0) ++ goto en8811h_load_firmware_out; ++ ++ ret = air_buckpbus_reg_write(phydev, EN8811H_FW_CTRL_1, ++ EN8811H_FW_CTRL_1_FINISH); ++ if (ret < 0) ++ goto en8811h_load_firmware_out; ++ ++ ret = 0; ++ ++en8811h_load_firmware_out: ++ release_firmware(fw2); ++ ++en8811h_load_firmware_rel1: ++ release_firmware(fw1); ++ ++ return ret; ++} ++ ++static int air_hw_led_on_set(struct phy_device *phydev, u8 index, bool on) ++{ ++ struct en8811h_priv *priv = phydev->priv; ++ bool changed; ++ ++ if (index >= EN8811H_LED_COUNT) ++ return -EINVAL; ++ ++ if (on) ++ changed = !test_and_set_bit(AIR_PHY_LED_STATE_FORCE_ON, ++ &priv->led[index].state); ++ else ++ changed = !!test_and_clear_bit(AIR_PHY_LED_STATE_FORCE_ON, ++ &priv->led[index].state); ++ ++ changed |= (priv->led[index].rules != 0); ++ ++ if (changed) ++ return phy_modify_mmd(phydev, MDIO_MMD_VEND2, ++ AIR_PHY_LED_ON(index), ++ AIR_PHY_LED_ON_MASK, ++ on ? AIR_PHY_LED_ON_FORCE_ON : 0); ++ ++ return 0; ++} ++ ++static int air_hw_led_blink_set(struct phy_device *phydev, u8 index, ++ bool blinking) ++{ ++ struct en8811h_priv *priv = phydev->priv; ++ bool changed; ++ ++ if (index >= EN8811H_LED_COUNT) ++ return -EINVAL; ++ ++ if (blinking) ++ changed = !test_and_set_bit(AIR_PHY_LED_STATE_FORCE_BLINK, ++ &priv->led[index].state); ++ else ++ changed = !!test_and_clear_bit(AIR_PHY_LED_STATE_FORCE_BLINK, ++ &priv->led[index].state); ++ ++ changed |= (priv->led[index].rules != 0); ++ ++ if (changed) ++ return phy_write_mmd(phydev, MDIO_MMD_VEND2, ++ AIR_PHY_LED_BLINK(index), ++ blinking ? ++ AIR_PHY_LED_BLINK_FORCE_BLINK : 0); ++ else ++ return 0; ++} ++ ++static int air_led_blink_set(struct phy_device *phydev, u8 index, ++ unsigned long *delay_on, ++ unsigned long *delay_off) ++{ ++ struct en8811h_priv *priv = phydev->priv; ++ bool blinking = false; ++ int err; ++ ++ if (index >= EN8811H_LED_COUNT) ++ return -EINVAL; ++ ++ if (delay_on && delay_off && (*delay_on > 0) && (*delay_off > 0)) { ++ blinking = true; ++ *delay_on = 50; ++ *delay_off = 50; ++ } ++ ++ err = air_hw_led_blink_set(phydev, index, blinking); ++ if (err) ++ return err; ++ ++ /* led-blink set, so switch led-on off */ ++ err = air_hw_led_on_set(phydev, index, false); ++ if (err) ++ return err; ++ ++ /* hw-control is off*/ ++ if (!!test_bit(AIR_PHY_LED_STATE_FORCE_BLINK, &priv->led[index].state)) ++ priv->led[index].rules = 0; ++ ++ return 0; ++} ++ ++static int air_led_brightness_set(struct phy_device *phydev, u8 index, ++ enum led_brightness value) ++{ ++ struct en8811h_priv *priv = phydev->priv; ++ int err; ++ ++ if (index >= EN8811H_LED_COUNT) ++ return -EINVAL; ++ ++ /* led-on set, so switch led-blink off */ ++ err = air_hw_led_blink_set(phydev, index, false); ++ if (err) ++ return err; ++ ++ err = air_hw_led_on_set(phydev, index, (value != LED_OFF)); ++ if (err) ++ return err; ++ ++ /* hw-control is off */ ++ if (!!test_bit(AIR_PHY_LED_STATE_FORCE_ON, &priv->led[index].state)) ++ priv->led[index].rules = 0; ++ ++ return 0; ++} ++ ++static int air_led_hw_control_get(struct phy_device *phydev, u8 index, ++ unsigned long *rules) ++{ ++ struct en8811h_priv *priv = phydev->priv; ++ ++ if (index >= EN8811H_LED_COUNT) ++ return -EINVAL; ++ ++ *rules = priv->led[index].rules; ++ ++ return 0; ++}; ++ ++static int air_led_hw_control_set(struct phy_device *phydev, u8 index, ++ unsigned long rules) ++{ ++ struct en8811h_priv *priv = phydev->priv; ++ u16 on = 0, blink = 0; ++ int ret; ++ ++ priv->led[index].rules = rules; ++ ++ if (index >= EN8811H_LED_COUNT) ++ return -EINVAL; ++ ++ if (rules & (BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK))) { ++ on |= AIR_PHY_LED_ON_LINK10; ++ if (rules & BIT(TRIGGER_NETDEV_RX)) ++ blink |= AIR_PHY_LED_BLINK_10RX; ++ if (rules & BIT(TRIGGER_NETDEV_TX)) ++ blink |= AIR_PHY_LED_BLINK_10TX; ++ } ++ ++ if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK))) { ++ on |= AIR_PHY_LED_ON_LINK100; ++ if (rules & BIT(TRIGGER_NETDEV_RX)) ++ blink |= AIR_PHY_LED_BLINK_100RX; ++ if (rules & BIT(TRIGGER_NETDEV_TX)) ++ blink |= AIR_PHY_LED_BLINK_100TX; ++ } ++ ++ if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK))) { ++ on |= AIR_PHY_LED_ON_LINK1000; ++ if (rules & BIT(TRIGGER_NETDEV_RX)) ++ blink |= AIR_PHY_LED_BLINK_1000RX; ++ if (rules & BIT(TRIGGER_NETDEV_TX)) ++ blink |= AIR_PHY_LED_BLINK_1000TX; ++ } ++ ++ if (rules & (BIT(TRIGGER_NETDEV_LINK_2500) | BIT(TRIGGER_NETDEV_LINK))) { ++ on |= AIR_PHY_LED_ON_LINK2500; ++ if (rules & BIT(TRIGGER_NETDEV_RX)) ++ blink |= AIR_PHY_LED_BLINK_2500RX; ++ if (rules & BIT(TRIGGER_NETDEV_TX)) ++ blink |= AIR_PHY_LED_BLINK_2500TX; ++ } ++ ++ if (on == 0) { ++ if (rules & BIT(TRIGGER_NETDEV_RX)) { ++ blink |= AIR_PHY_LED_BLINK_10RX | ++ AIR_PHY_LED_BLINK_100RX | ++ AIR_PHY_LED_BLINK_1000RX | ++ AIR_PHY_LED_BLINK_2500RX; ++ } ++ if (rules & BIT(TRIGGER_NETDEV_TX)) { ++ blink |= AIR_PHY_LED_BLINK_10TX | ++ AIR_PHY_LED_BLINK_100TX | ++ AIR_PHY_LED_BLINK_1000TX | ++ AIR_PHY_LED_BLINK_2500TX; ++ } ++ } ++ ++ if (rules & BIT(TRIGGER_NETDEV_FULL_DUPLEX)) ++ on |= AIR_PHY_LED_ON_FDX; ++ ++ if (rules & BIT(TRIGGER_NETDEV_HALF_DUPLEX)) ++ on |= AIR_PHY_LED_ON_HDX; ++ ++ if (blink || on) { ++ /* switch hw-control on, so led-on and led-blink are off */ ++ clear_bit(AIR_PHY_LED_STATE_FORCE_ON, &priv->led[index].state); ++ clear_bit(AIR_PHY_LED_STATE_FORCE_BLINK, &priv->led[index].state); ++ } else { ++ priv->led[index].rules = 0; ++ } ++ ++ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_ON(index), ++ AIR_PHY_LED_ON_MASK, on); ++ ++ if (ret < 0) ++ return ret; ++ ++ return phy_write_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_BLINK(index), ++ blink); ++}; ++ ++static int air_led_init(struct phy_device *phydev, u8 index, u8 state, u8 pol) ++{ ++ int cl45_data; ++ int err; ++ ++ if (index >= EN8811H_LED_COUNT) ++ return -EINVAL; ++ ++ cl45_data = phy_read_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_ON(index)); ++ if (cl45_data < 0) ++ return cl45_data; ++ ++ if (state == AIR_LED_ENABLE) ++ cl45_data |= AIR_PHY_LED_ON_ENABLE; ++ else ++ cl45_data &= ~AIR_PHY_LED_ON_ENABLE; ++ ++ if (pol == AIR_ACTIVE_HIGH) ++ cl45_data |= AIR_PHY_LED_ON_POLARITY; ++ else ++ cl45_data &= ~AIR_PHY_LED_ON_POLARITY; ++ ++ err = phy_write_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_ON(index), ++ cl45_data); ++ if (err < 0) ++ return err; ++ ++ return 0; ++} ++ ++static int air_leds_init(struct phy_device *phydev, int num, int dur, int mode) ++{ ++ struct en8811h_priv *priv = phydev->priv; ++ int cl45_data = dur; ++ int ret, i; ++ ++ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_DUR_BLINK, ++ cl45_data); ++ if (ret < 0) ++ return ret; ++ ++ cl45_data >>= 1; ++ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_DUR_ON, ++ cl45_data); ++ if (ret < 0) ++ return ret; ++ ++ cl45_data = phy_read_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_BCR); ++ if (cl45_data < 0) ++ return cl45_data; ++ ++ switch (mode) { ++ case AIR_LED_MODE_DISABLE: ++ cl45_data &= ~AIR_PHY_LED_BCR_EXT_CTRL; ++ cl45_data &= ~AIR_PHY_LED_BCR_MODE_MASK; ++ break; ++ case AIR_LED_MODE_USER_DEFINE: ++ cl45_data |= AIR_PHY_LED_BCR_EXT_CTRL; ++ cl45_data |= AIR_PHY_LED_BCR_CLK_EN; ++ break; ++ default: ++ phydev_err(phydev, "LED mode %d is not supported\n", mode); ++ return -EINVAL; ++ } ++ ++ ret = phy_write_mmd(phydev, MDIO_MMD_VEND2, AIR_PHY_LED_BCR, cl45_data); ++ if (ret < 0) ++ return ret; ++ ++ for (i = 0; i < num; ++i) { ++ ret = air_led_init(phydev, i, AIR_LED_ENABLE, AIR_ACTIVE_HIGH); ++ if (ret < 0) { ++ phydev_err(phydev, "LED%d init failed: %d\n", i, ret); ++ return ret; ++ } ++ air_led_hw_control_set(phydev, i, priv->led[i].rules); ++ } ++ ++ return 0; ++} ++ ++static int en8811h_led_hw_is_supported(struct phy_device *phydev, u8 index, ++ unsigned long rules) ++{ ++ if (index >= EN8811H_LED_COUNT) ++ return -EINVAL; ++ ++ /* All combinations of the supported triggers are allowed */ ++ if (rules & ~en8811h_led_trig) ++ return -EOPNOTSUPP; ++ ++ return 0; ++}; ++ ++static int en8811h_probe(struct phy_device *phydev) ++{ ++ struct en8811h_priv *priv; ++ ++ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(struct en8811h_priv), ++ GFP_KERNEL); ++ if (!priv) ++ return -ENOMEM; ++ ++ priv->led[0].rules = AIR_DEFAULT_TRIGGER_LED0; ++ priv->led[1].rules = AIR_DEFAULT_TRIGGER_LED1; ++ priv->led[2].rules = AIR_DEFAULT_TRIGGER_LED2; ++ ++ phydev->priv = priv; ++ ++ /* MDIO_DEVS1/2 empty, so set mmds_present bits here */ ++ phydev->c45_ids.mmds_present |= MDIO_DEVS_PMAPMD | MDIO_DEVS_AN; ++ ++ return 0; ++} ++ ++static int en8811h_config_init(struct phy_device *phydev) ++{ ++ struct device *dev = &phydev->mdio.dev; ++ int ret, pollret, reg_value; ++ unsigned int pbus_value; ++ ++ ret = en8811h_load_firmware(phydev); ++ if (ret) { ++ phydev_err(phydev, "Load firmware failed: %d\n", ret); ++ return ret; ++ } ++ ++ /* Because of mdio-lock, may have to wait for multiple loads */ ++ pollret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, ++ EN8811H_PHY_FW_STATUS, reg_value, ++ reg_value == EN8811H_PHY_READY, ++ 20000, 7500000, true); ++ ++ ret = air_buckpbus_reg_read(phydev, EN8811H_FW_VERSION, &pbus_value); ++ if (ret < 0) ++ return ret; ++ phydev_info(phydev, "MD32 firmware version: %08x\n", pbus_value); ++ ++ if (pollret) { ++ phydev_err(phydev, "Firmware not ready: 0x%x\n", reg_value); ++ return -ENODEV; ++ } ++ ++ /* Select mode 1, the only mode supported */ ++ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_HOST_CMD_1, ++ AIR_PHY_HOST_CMD_1_MODE1); ++ if (ret < 0) ++ return ret; ++ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_HOST_CMD_2, ++ AIR_PHY_HOST_CMD_2_MODE1); ++ if (ret < 0) ++ return ret; ++ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_HOST_CMD_3, ++ AIR_PHY_HOST_CMD_3_MODE1); ++ if (ret < 0) ++ return ret; ++ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_HOST_CMD_4, ++ AIR_PHY_HOST_CMD_4_MODE1); ++ if (ret < 0) ++ return ret; ++ ++ /* Serdes polarity */ ++ ret = air_buckpbus_reg_read(phydev, EN8811H_POLARITY, &pbus_value); ++ if (ret < 0) ++ return ret; ++ if (device_property_read_bool(dev, "airoha,pnswap-rx")) ++ pbus_value |= EN8811H_POLARITY_RX_REVERSE; ++ else ++ pbus_value &= ~EN8811H_POLARITY_RX_REVERSE; ++ if (device_property_read_bool(dev, "airoha,pnswap-tx")) ++ pbus_value &= ~EN8811H_POLARITY_TX_NORMAL; ++ else ++ pbus_value |= EN8811H_POLARITY_TX_NORMAL; ++ ret = air_buckpbus_reg_write(phydev, EN8811H_POLARITY, pbus_value); ++ if (ret < 0) ++ return ret; ++ ++ ret = air_leds_init(phydev, EN8811H_LED_COUNT, AIR_PHY_LED_DUR, ++ AIR_LED_MODE_USER_DEFINE); ++ if (ret < 0) { ++ phydev_err(phydev, "Failed to initialize leds: %d\n", ret); ++ return ret; ++ } ++ ++ ret = air_buckpbus_reg_read(phydev, EN8811H_GPIO_OUTPUT, &pbus_value); ++ if (ret < 0) ++ return ret; ++ pbus_value |= EN8811H_GPIO_OUTPUT_345; ++ ret = air_buckpbus_reg_write(phydev, EN8811H_GPIO_OUTPUT, pbus_value); ++ if (ret < 0) ++ return ret; ++ ++ return 0; ++} ++ ++static int en8811h_get_features(struct phy_device *phydev) ++{ ++ linkmode_set_bit_array(phy_basic_ports_array, ++ ARRAY_SIZE(phy_basic_ports_array), ++ phydev->supported); ++ ++ return genphy_c45_pma_read_abilities(phydev); ++} ++ ++static int en8811h_get_rate_matching(struct phy_device *phydev, ++ phy_interface_t iface) ++{ ++ return RATE_MATCH_PAUSE; ++} ++ ++static int en8811h_config_aneg(struct phy_device *phydev) ++{ ++ bool changed = false; ++ int err, val; ++ ++ val = 0; ++ if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, ++ phydev->advertising)) ++ val |= MDIO_AN_10GBT_CTRL_ADV2_5G; ++ err = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL, ++ MDIO_AN_10GBT_CTRL_ADV2_5G, val); ++ if (err < 0) ++ return err; ++ if (err > 0) ++ changed = true; ++ ++ return __genphy_config_aneg(phydev, changed); ++} ++ ++static int en8811h_read_status(struct phy_device *phydev) ++{ ++ int ret, val; ++ ++ ret = genphy_update_link(phydev); ++ if (ret) ++ return ret; ++ ++ phydev->master_slave_get = MASTER_SLAVE_CFG_UNSUPPORTED; ++ phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED; ++ phydev->speed = SPEED_UNKNOWN; ++ phydev->duplex = DUPLEX_UNKNOWN; ++ phydev->pause = 0; ++ phydev->asym_pause = 0; ++ ++ if (phydev->is_gigabit_capable) { ++ ret = genphy_read_master_slave(phydev); ++ if (ret < 0) ++ return ret; ++ } ++ ++ ret = genphy_read_lpa(phydev); ++ if (ret < 0) ++ return ret; ++ ++ if (phydev->autoneg == AUTONEG_ENABLE) ++ phy_resolve_aneg_pause(phydev); ++ ++ if (!phydev->link) ++ return 0; ++ ++ /* Get real speed from vendor register */ ++ val = phy_read(phydev, AIR_SPEED_STATUS_REFCLK); ++ if (val < 0) ++ return val; ++ switch (val & AIR_SPEED_STATUS_REFCLK_MASK) { ++ case AIR_SPEED_STATUS_REFCLK_2500: ++ phydev->speed = SPEED_2500; ++ /* BUG in PHY: MDIO_AN_10GBT_STAT_LP2_5G does not get set ++ * Assume link partner advertised it ++ */ ++ linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, ++ phydev->lp_advertising); ++ break; ++ case AIR_SPEED_STATUS_REFCLK_1000: ++ phydev->speed = SPEED_1000; ++ break; ++ case AIR_SPEED_STATUS_REFCLK_100: ++ phydev->speed = SPEED_100; ++ break; ++ } ++ ++ /* Only supports full duplex */ ++ phydev->duplex = DUPLEX_FULL; ++ ++ return 0; ++} ++ ++static int en8811h_clear_intr(struct phy_device *phydev) ++{ ++ int ret; ++ ++ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_HOST_CMD_3, ++ AIR_PHY_HOST_CMD_3_INTCLR); ++ if (ret < 0) ++ return ret; ++ ++ ret = phy_write_mmd(phydev, MDIO_MMD_VEND1, AIR_PHY_HOST_CMD_4, ++ AIR_PHY_HOST_CMD_4_INTCLR); ++ if (ret < 0) ++ return ret; ++ ++ return 0; ++} ++ ++static irqreturn_t en8811h_handle_interrupt(struct phy_device *phydev) ++{ ++ int ret; ++ ++ ret = en8811h_clear_intr(phydev); ++ if (ret < 0) { ++ phy_error(phydev); ++ return IRQ_NONE; ++ } ++ ++ phy_trigger_machine(phydev); ++ ++ return IRQ_HANDLED; ++} ++ ++static struct phy_driver en8811h_driver[] = { ++{ ++ PHY_ID_MATCH_MODEL(EN8811H_PHY_ID), ++ .name = "Airoha EN8811H", ++ .probe = en8811h_probe, ++ .get_features = en8811h_get_features, ++ .config_init = en8811h_config_init, ++ .get_rate_matching = en8811h_get_rate_matching, ++ .config_aneg = en8811h_config_aneg, ++ .read_status = en8811h_read_status, ++ .config_intr = en8811h_clear_intr, ++ .handle_interrupt = en8811h_handle_interrupt, ++ .led_hw_is_supported = en8811h_led_hw_is_supported, ++ .read_page = air_phy_read_page, ++ .write_page = air_phy_write_page, ++ .led_blink_set = air_led_blink_set, ++ .led_brightness_set = air_led_brightness_set, ++ .led_hw_control_set = air_led_hw_control_set, ++ .led_hw_control_get = air_led_hw_control_get, ++} }; ++ ++module_phy_driver(en8811h_driver); ++ ++static struct mdio_device_id __maybe_unused en8811h_tbl[] = { ++ { PHY_ID_MATCH_MODEL(EN8811H_PHY_ID) }, ++ { } ++}; ++MODULE_DEVICE_TABLE(mdio, en8811h_tbl); ++MODULE_FIRMWARE(EN8811H_MD32_DM); ++MODULE_FIRMWARE(EN8811H_MD32_DSP); ++ ++MODULE_DESCRIPTION("Airoha EN8811H PHY drivers"); ++MODULE_AUTHOR("Airoha"); ++MODULE_AUTHOR("Eric Woudstra "); ++MODULE_LICENSE("GPL"); ++ diff --git a/target/linux/mediatek/patches-6.1/500-gsw-rtl8367s-mt7622-support.patch b/target/linux/mediatek/patches-6.1/500-gsw-rtl8367s-mt7622-support.patch index 9c575d694b1cf1..3ae2693a2a4e39 100644 --- a/target/linux/mediatek/patches-6.1/500-gsw-rtl8367s-mt7622-support.patch +++ b/target/linux/mediatek/patches-6.1/500-gsw-rtl8367s-mt7622-support.patch @@ -1,6 +1,6 @@ --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -386,6 +386,12 @@ config ROCKCHIP_PHY +@@ -391,6 +391,12 @@ config ROCKCHIP_PHY help Currently supports the integrated Ethernet PHY. @@ -15,7 +15,7 @@ help --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile -@@ -94,6 +94,7 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o +@@ -95,6 +95,7 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o obj-$(CONFIG_REALTEK_PHY) += realtek.o obj-$(CONFIG_RENESAS_PHY) += uPD60620.o obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o diff --git a/target/linux/mediatek/patches-6.1/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch b/target/linux/mediatek/patches-6.1/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch index a0f6ed5be6882f..0e6be604e65c25 100644 --- a/target/linux/mediatek/patches-6.1/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch +++ b/target/linux/mediatek/patches-6.1/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch @@ -42,7 +42,7 @@ Signed-off-by: David S. Miller L: linux-i2c@vger.kernel.org --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -311,6 +311,18 @@ config MEDIATEK_GE_PHY +@@ -316,6 +316,18 @@ config MEDIATEK_GE_PHY help Supports the MediaTek Gigabit Ethernet PHYs. @@ -63,7 +63,7 @@ Signed-off-by: David S. Miller depends on PTP_1588_CLOCK_OPTIONAL --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile -@@ -80,6 +80,7 @@ obj-$(CONFIG_MARVELL_PHY) += marvell.o +@@ -81,6 +81,7 @@ obj-$(CONFIG_MARVELL_PHY) += marvell.o obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o diff --git a/target/linux/mediatek/patches-6.1/733-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch b/target/linux/mediatek/patches-6.1/733-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch index a3dcefd3f1824f..0e1ef004d02487 100644 --- a/target/linux/mediatek/patches-6.1/733-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch +++ b/target/linux/mediatek/patches-6.1/733-net-phy-add-driver-for-MediaTek-2.5G-PHY.patch @@ -13,7 +13,7 @@ Signed-off-by: Daniel Golle --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig -@@ -323,6 +323,13 @@ config MEDIATEK_GE_SOC_PHY +@@ -328,6 +328,13 @@ config MEDIATEK_GE_SOC_PHY present in the SoCs efuse and will dynamically calibrate VCM (common-mode voltage) during startup. @@ -29,7 +29,7 @@ Signed-off-by: Daniel Golle depends on PTP_1588_CLOCK_OPTIONAL --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile -@@ -79,6 +79,7 @@ obj-$(CONFIG_MARVELL_10G_PHY) += marvell +@@ -80,6 +80,7 @@ obj-$(CONFIG_MARVELL_10G_PHY) += marvell obj-$(CONFIG_MARVELL_PHY) += marvell.o obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o