Update firmware 1.20 powerwall 2

[blokl]

Hello,

A new firmware V 1.20 and it wont work anymore.
Any Idee?

Kind regads,

Leo

[ekul135]

What error message are you getting?

[blokl]

Hello Ekul, Thats the problem. I don’t get any error exept “no data returned” And the strange thin is when I use “python PW_Simple.py”he sends the data tot he pvoutput. But when I start “python PW_Datalogger.py”nothing happens. I renew also the sqlite file tob e sure this was ok. But it don’t work. Kind regards, Leo Blok Van: ekul135 <notifications@github.com> Verzonden: vrijdag 3 augustus 2018 00:45 Aan: ekul135/Powerwall2PVOutput <Powerwall2PVOutput@noreply.github.com> CC: Leo Blok <blokl@blokl.nl>; Author <author@noreply.github.com> Onderwerp: Re: [ekul135/Powerwall2PVOutput] Update firmware 1.20 powerwall 2 (#9) What error message are you getting? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<#9 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AkBhTwMEPTkO0ADBQjlc_JHUmDFR4IJcks5uM4EJgaJpZM4VshoI>.

[blokl]

Hello Ekul, I see now in the log 2018-08-03 10:36:27,626 - Main: Sleeping 5 minutes Bad request 400: Invalid power value [-154] 2018-08-03 10:46:38,276 - Main: Sleeping 5 minutes Bad request 400: Invalid power value [-118] I hope this helps? Kind regards, Leo Blok Van: ekul135 <notifications@github.com> Verzonden: vrijdag 3 augustus 2018 00:45 Aan: ekul135/Powerwall2PVOutput <Powerwall2PVOutput@noreply.github.com> CC: Leo Blok <blokl@blokl.nl>; Author <author@noreply.github.com> Onderwerp: Re: [ekul135/Powerwall2PVOutput] Update firmware 1.20 powerwall 2 (#9) What error message are you getting? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<#9 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AkBhTwMEPTkO0ADBQjlc_JHUmDFR4IJcks5uM4EJgaJpZM4VshoI>.

[blokl]

Halo Ekul, I think it was a hikup with pvoutput. I changed nothing and it works again. Thx, Leo Blok Van: ekul135 <notifications@github.com> Verzonden: vrijdag 3 augustus 2018 00:45 Aan: ekul135/Powerwall2PVOutput <Powerwall2PVOutput@noreply.github.com> CC: Leo Blok <blokl@blokl.nl>; Author <author@noreply.github.com> Onderwerp: Re: [ekul135/Powerwall2PVOutput] Update firmware 1.20 powerwall 2 (#9) What error message are you getting? — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<#9 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/AkBhTwMEPTkO0ADBQjlc_JHUmDFR4IJcks5uM4EJgaJpZM4VshoI>.