NanoBud is a simple electronic project created for workshops into FabLabs. Basically this project is provided with "Space Invaders" retro game made by makestuffordie. With simple electronic components you can make some great stuffs. But you can use it not only for gaming. Per example, replace the rotary encoder by a temperature sensor, load the suitable arduino sketch, then you have a beautiful portable weather station!
With this project you can do a workshop and show people how to assembly electronic components and get perfect welds. Please visit the wiki to get the workshop kit. -> Wiki
But not only, if you want go further and make different kind of workshops, here some quick ideas:
- How to load and programm Arduino boards
- How to manage oled screen.
- Design your own case for 3D print or 2D Lasercut.
As you understood, the only limit is your creativity. :-)
Enjoy and don't hesitate to share your experiences.
Version 1
- 1x Rotary encoder
- 1x Arduino Nano
- 1x OLED screen 0.96" 128x64pix
- 1x micro switch
- 1x 9V Battery
- 1x 9V to wire adapter
- 1x Buzzer
- 1x Resistor 100 Ohms
- 1x Female pin header 1x4
Black edition
- 1x Female pin header 1x4
- 1x Arduino Nano
- 1x OLED screen 0.96" 128x64pix
- 1x micro switch
- 1x 9V Battery
- 1x 9V to wire adapter
- 1x Buzzer
- 1x Resistor 100 Ohms
- 1x Capacitor 100pF
- 1x Shotkky diode 1N5819
- 1x Vibrator 3.3V
- 1x Resistor 300 Ohms
- 1x Resistor 10k
- 1x MOSFET BS170
- 1x Mini Joystick
- 1x Battery holder 9V
- 1x ScrewVis M2.5 x8mm
- 1 PCB black
The version 1 is the sketch from makestuffordie Black edition need the software made for. sotware/nanobud. It will manage the vibrator and the joystick
Improvements or other applications would be appreciated. Don't hesitate to share it! Don't hesitate participate to the project.