intel-power-gadget

Updated for 8th generation Intel processors on Ubuntu 18.04.

• Updated Makefile to include -lm flags.
• Updated rapl.c to include 8th generation processor.

Follow the instructions below to make the executable. Make sure you run power_gadget with sudo, otherwise it will fail when attempting to read msr.

Intel(r) Power Gadget {#mainpage}

Intel(r) Power Gadget is a software utility and library, which allows developers to monitor power at very fine time granularities (few tens of milliseconds). Power monitoring is available for the following power domains:

• per package domain (CPU socket)
• per core domain (all the cpu cores on a package)
• per uncore domain (uncore components, e.g. integrated graphics, client parts only)
• per memory node (memory local to a package, server parts only) To do this, the tool uses an architected capability in Intel(r) processors which is called RAPL (Runtime Average Power Limiting). RAPL is available on Intel(r) codename Sandy Bridge and later processors.

How to use it

Prerequisites: This tool uses the msr and cpuid kernel modules. You may have to do:

modprobe msr

modprobe cpuid

On RedHat, you may have to run:

mk_msr_dev_redhat.sh

To build:

make

To run:

sudo ./power_gadget [-e [sampling_delay_ms ] optional] -d duration]

Known Limitations / Issues / BKMs

• The DRAM RAPL is not enabled in BIOS by default. To enable in BIOS, go to Memory Configuration and change the mode from 'Performance' to 'Power Efficient'. Then select 'Mode 1'. This is the VR (voltage regulator) mode of power estimation. The accuracy of this mode is highly dependent on the OEM platform. For Intel reference platforms the accuracy of DRAM power estimation may produce up to ~30% error.