Home Assistant OS 13.0

[sairon]

Home Assistant Operating System

• Use EROFS for the root filesystem (Use EROFS for the root filesystem #3456) @sairon
• Bump buildroot to 2024.02.4 (Bump buildroot to 2024.02.4 #3487) @sairon
• Enable Netfilter MARK match kernel configuration (Enable Netfilter MARK match kernel configuration #3492) @agners
• Reduce log spam from Docker health checks (Reduce log spam from Docker health checks #3491) @sairon
• Generate version information for RAUC when rauc.db is empty (Generate version information for RAUC when rauc.db is empty #3436) @sairon
• Remove old code from rauc-hook and GRUB env initialization (Remove old code from rauc-hook and GRUB env initialization #3457) @sairon
• Increase block size of kernel squashfs image to 128K (Increase block size of kernel squashfs image to 128K #3509) @sairon

Raspberry Pi

• Patch genimage to force first usable LBA @ 34 to fix RPi 5/Windows issues (Patch genimage to force first usable LBA @ 34 to fix RPi 5/Windows issues #3497) @sairon

Home Assistant Green

• Linux: Update kernel to 6.6.44 (Linux: Update kernel to 6.6.44 #3500) @sairon
• Enable eMMC HS200 mode in Green's U-Boot defconfig (Enable eMMC HS200 mode in Green's U-Boot defconfig #3511) @sairon

Open Virtual Appliance

• Linux: Update kernel to 6.6.44 (Linux: Update kernel to 6.6.44 #3500) @sairon
• Enable aQuantia AQtion ethernet driver (Enable aQuantia AQtion ethernet driver #3467) @sairon
• Fix boot slot A marked as bad on the very first boot (Fix boot slot A marked as bad on the very first boot #3435) @sairon

Generic x86-64

• Linux: Update kernel to 6.6.44 (Linux: Update kernel to 6.6.44 #3500) @sairon
• Use GRUB2 legacy loader only on some Intel Atom boards specifically (Use GRUB2 legacy loader only on some Intel Atom boards specifically #3498) @sairon
• Revert "Revert GRUB2 patch causing boot failure on some old x86_64 BIOSes (Revert GRUB2 patch causing boot failure on some old x86_64 BIOSes #3324)" (Revert "Revert GRUB2 patch causing boot failure on some old x86_64 BIOSes (#3324)" #3470) @sairon
• Enable aQuantia AQtion ethernet driver (Enable aQuantia AQtion ethernet driver #3467) @sairon
• Fix boot slot A marked as bad on the very first boot (Fix boot slot A marked as bad on the very first boot #3435) @sairon

Hardkernel ODROID

• Linux: Update kernel to 6.6.44 (Linux: Update kernel to 6.6.44 #3500) @sairon
• Fix writing U-Boot environment on ODROID-M1 (Fix writing U-Boot environment on ODROID-M1 #3510) @sairon
• Bump ODROID N2's U-Boot to v2024.01 again (Bump ODROID N2's U-Boot to v2024.01 again #3508) @sairon

ASUS Tinker

• Linux: Update kernel to 6.6.44 (Linux: Update kernel to 6.6.44 #3500) @sairon

Khadas VIM Series

• Linux: Update kernel to 6.6.44 (Linux: Update kernel to 6.6.44 #3500) @sairon

Generic aarch64

• Linux: Update kernel to 6.6.44 (Linux: Update kernel to 6.6.44 #3500) @sairon
• Enable i6300ESB watchdog driver for generic-aarch64 (Enable i6300ESB watchdog driver for generic-aarch64 #3468) @sairon
• Populate grubenv with RAUC data in clean aarch64 OS image (Populate grubenv with RAUC data in clean aarch64 OS image #3458) @sairon
• Fix rauc hook to restore machine-id in new grub environment (Fix rauc hook to restore machine-id in new grub environment #3451) @claplace

Build System

• Test landing page is reachable without internet connection (Test landing page is reachable without internet connection #3499) @sairon
• Patch genimage to force first usable LBA @ 34 to fix RPi 5/Windows issues (Patch genimage to force first usable LBA @ 34 to fix RPi 5/Windows issues #3497) @sairon

Documentation

• Refer to GRUB instead of Barebox in top-level readme (Refer to GRUB instead of Barebox in top-level readme #3464) @sairon

---

This discussion was created from the release Home Assistant OS 13.0.

[Anto79-ops]

hey looks like the build finished but waiting on stable reveiw. Thanks

Installed no problem on NUC 12.

Thanks

[ThePatricide]

All seems well on x86-64 machine, thanks again for your hard and great work.

[RedDaveNY]

I always wait usually one day after update system. Nice to know x86 work .^^

[m-rossi]

Someone with RaspberryPi 5 and ZHA already updated and can check if #3352 is still an issue?

[thezfunk]

Or Raspberry Pi3. I think we are both waiting on the same issue. I am stuck at 11.5. Any of the 12 versions cause a boot loop.

[tescophil]

Bricked my Pi3, well done...

[Veldkornet]

Seems like all my USB devices that were connected to a USB hub no longer work after this update.... I'll make an issue........

[claplace]

Just updated and so far so good. The rauc hook fix for generic aarch64 worked :)

[dmelideo]

Update on Odriod N2+ was flawless. Thank you

[brugk000]

Updated from 12.3 to 13.o on HP T620
12.4 had issues. Updated to 13.0 and this works after a manual restart of the T620
Thanks

[hundehausen]

Updated on Proxmox, now the CPU usage is lower! Thank You!

[g1mp11]

Update worked flawless from 12.4 -> 13.0 on RPi5 with NVMe in 1 min.

[thezfunk]

Are you using a USB Z-Wave dongle?

[jhiggason]

Upgraded HA OS 12.4 to 13.0. I saw the update appear in the gui- but then when I went to upgrade it was gone. ha os update --version 13.0 worked from the terminal to upgrade to 13.

I am seeing a "Enity is currently unavailable: Home (weather.forecast_home) but besides that everything else appears to be working.

Update took about 1 minute on Proxmox. 4 cpu, 4gb ram VM.

[jhiggason]

"I am seeing a "Enity is currently unavailable: Home (weather.forecast_home) but besides that everything else appears to be working."

It looks like the update created a new enitity for Meteorologisk institutt but didn't remove the old one. I just deleted the old entity and it all looks good now.

[LG69Domo]

Problem updating from 12.4 to 13.0 with Raspberry PI 4

[apadua]

No release notes for HA Yellow. Anyone tried it?

[andyshinn]

Also patiently waiting to hear more reports on Yellow. Burned by too many HA OS updates and now I am scared to ever upgrade again 😆