HAOS fails if virtual hardware switches from Intel 440FX to Q35

[wojciechczyz]

Describe the issue you are experiencing

I want to upgrade the VM configuration of HAOS. I switched from Intel 440FX to Q35.
HAOS boots but does not connect network interfaces nor console and stays with 1 CPU on 100% usage.

What operating system image do you use?

generic-x86-64 (Generic UEFI capable x86-64 systems)

What version of Home Assistant Operating System is installed?

13.2

Did the problem occur after upgrading the Operating System?

No

Hardware details

VM on Proxmox host

Steps to reproduce the issue

1. Change VM hardware from Intel 440FX to Q35.
2. Reboot

Anything in the Supervisor logs that might be useful for us?

No

Anything in the Host logs that might be useful for us?

No

System information

No response

Additional information

No response

[Impact123]

I can reproduce the network issue but not the 100% CPU utilization. I recommend you run top -o %CPU to check why that is. I'm guessing it's the DNS plugin.

Anyways, here's the output of ha network info.

# ha network info
docker:
  address: 172.30.32.0/23
  dns: 172.30.32.3
  gateway: 172.30.32.1
  interface: hassio
host_internet: null
interfaces:
- connected: false
  enabled: false
  interface: enp6s18
  ipv4:
    address: []
    gateway: null
    method: disabled
    nameservers: []
    ready: false
  ipv6:
    address: []
    gateway: null
    method: disabled
    nameservers: []
    ready: false
  mac: XX
  primary: false
  type: ethernet
  vlan: null
  wifi: null
supervisor_internet: false

And nmcli con.

Supervisor enp0s18  ca1fcaf2-f250-306f-9989-afcfe8a38b27  ethernet  --

See the difference in the device name? /mnt/overlay/etc/NetworkManager/system-connections/ still has the old name.
Manually triggering ha supervisor repair and rebooting does not seem to fix it.
I used this to fix it: https://github.com/home-assistant/operating-system/blob/dev/Documentation/network.md#reset-network.
I suppose you can also use nmcli. nmtui should probably be made part of the OS too.
By the way are you sure you use generic-x86-64? A VM ususally uses OVA.

[wojciechczyz]

How did you got to use console? I cannot connect via disconnected network interface nor VM console which is not initialized.

[Impact123]

Please edit your message to not needlessly quote my whole message. It prevents me from editing it and clutters the issue.
I used noVNC and xterm.

[wojciechczyz]

What is the type of the display that you set in the Hardware/Display? Tried Default, Standard VGA, Serial - yet result it is the same, does not connect to the console

[Impact123]

Just the default. I also added a serial port for xterm. If you come to discord I can help you with that. Let's try to keep this issue focused on the actual bug. Remember that lots of people get notified when a post is made here.