You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
The external SSD my Home Assistant Green used as data disk got corrupted because the cable got a little bit loose. When trying the new factory reset introduced in HAOS 13.1, the device seemed to still initiate the usual booting sequence. The device was pingable, but observer and HA Core were down. When connected a screen, it kept showing the "Waiting for the Home Assistant CLI to be ready" line.
One log file survived the wipe I eventually did using the SD card procedure, and although the date and time don't match, the attached USB keyboard and the errors reflect the situation yesterday. On screen, there was a warning saying date and time were not reliable. The log shows the reset was not initiated:
mei 27 23:48:37 homeassistant systemd[1]: Home Assistant OS Device Wipe Service was skipped because of an unmet condition check (ConditionKernelCommandLine=haos.wipe=1).
I had HAOS 13.2 installed and followed the reset to factory settings guide. During the reset procedure, the orange led turned on solid as shown in the GIF. After that, there seemed to be no difference in behaviour between booting the HA Green with or without the reset procedure.
When booting the device without the external SSD, it went into the emergency console. This happened both with and without the reset button pressed at power on.
What operating system image do you use?
green (Home Assistant Green)
What version of Home Assistant Operating System is installed?
13.2
Did the problem occur after upgrading the Operating System?
No
Hardware details
Home Assistant Green with 250GB external SSD attached.
Describe the issue you are experiencing
The external SSD my Home Assistant Green used as data disk got corrupted because the cable got a little bit loose. When trying the new factory reset introduced in HAOS 13.1, the device seemed to still initiate the usual booting sequence. The device was pingable, but observer and HA Core were down. When connected a screen, it kept showing the "Waiting for the Home Assistant CLI to be ready" line.
One log file survived the wipe I eventually did using the SD card procedure, and although the date and time don't match, the attached USB keyboard and the errors reflect the situation yesterday. On screen, there was a warning saying date and time were not reliable. The log shows the reset was not initiated:
mei 27 23:48:37 homeassistant systemd[1]: Home Assistant OS Device Wipe Service was skipped because of an unmet condition check (ConditionKernelCommandLine=haos.wipe=1).
I had HAOS 13.2 installed and followed the reset to factory settings guide. During the reset procedure, the orange led turned on solid as shown in the GIF. After that, there seemed to be no difference in behaviour between booting the HA Green with or without the reset procedure.
When booting the device without the external SSD, it went into the emergency console. This happened both with and without the reset button pressed at power on.
What operating system image do you use?
green (Home Assistant Green)
What version of Home Assistant Operating System is installed?
13.2
Did the problem occur after upgrading the Operating System?
No
Hardware details
Home Assistant Green with 250GB external SSD attached.
The Fan-X usb dongle (for controlling ventilation) was also attached during use: https://github.com/Marcelh1/fanx/wiki
Steps to reproduce the issue
Anything in the Supervisor logs that might be useful for us?
Anything in the Host logs that might be useful for us?
System information
No response
Additional information
No response
The text was updated successfully, but these errors were encountered: