-
-
Notifications
You must be signed in to change notification settings - Fork 63
Tardiness
In certain circumstances in a Lingua Franca program, it is possible that an event occurs at a later tag than what was originally intended. This discrepancy can be interpreted as a tardiness
with a scalar value equal to the amount by which the original intended logical tag has been missed. The concept of tardiness
could either be considered an integral part of the language (where this discrepancy is explicitly allowed) or an error condition that arose due to some violated assumption. Here, we discuss each scenario where tardiness
can occur.
Physical actions are a language feature that are designed to allow a Lingua Franca program to respond to outside events from the physical world. For a physical action a
, a schedule
function can (and should) be called outside of a reaction asynchronously with an optional desired delay d
, and consequently trigger reactions to a particular external event. For a concrete example on how to use physical actions, see AsyncCallback.
For the purposes of this document, let's assume an asynchronous invocation of schedule
on a physical action a
with a delay of d1
has occurred when the Lingua Franca program was at tag t1(time, microstep)
and the underlying physical clock was indicating a time T1
. In this case, the intended tag of the external event can be interpreted to be (t1.time + d1,0)
.
There are two scenarios to be considered:
t1.time + d1 >= T1
: Since t.time<=T1
when a physical action is present, the intended timestamp at the time of calling schedule
can be honored. In other words, the Lingua Franca runtime can safely ensure that the corresponding event is in the future and will not interfere with reactions executing at the current tag. In this circumstance, tardiness
is zero.
T1 > t1.time + d1
: In this case, the intended logical tag cannot be honored and a new tag in the future must be assigned. For purposes beyond the scope of this document, the future assigned tag in this case will be (T1, 0)
. In such a scenario, a tardiness has occurred, where the original intended tag was not honored. The calculated tardiness
will be T1 - t1.time - d1
. In code, this tardiness can be accessed via a->trigger->tardiness
. See AsyncCallback for a more concrete example of this scenario. Alternatively, the Tardy
handler could be used as an alternative to the original reaction triggered by the physical action.
**Marten: I have two comments about this:
- Tardiness does not make a whole lot of sense when the physical action is scheduled with zero delay. The intended tag here is arguably T1. I think that in this case tardiness should therefore be zero.
- I would consider tardiness of a physical action to not be an error condition, so I don't think it should trigger the invocation of an error handler. If the reaction cares about tardiness, it could implement checks in normal reaction code. **
In a Lingua Franca program, a deadline is defined as a bound on the relation between logical time and physical time. More specifically, a deadline d
"specifies an alternative reaction body b2
that should be invoked if the physical time [T
] at which the normal reaction b1
would invoked is greater than the logical time [t
] of the trigger by at least d
". Inherently, whenever b2
is triggered, a tardiness has occurred. The amount of this tardiness will be T - t - d
.
FIXME: How it is accessed and implemented.
In a federated execution, communication between two federates can either happen on a physical (denoted by ~>
) or a logical (denoted by ->
) connection. In the case of physical connections, messages sent over the physical connection will be assigned a timestamp t
at the sender with an optional delay d
imposed using after
. In this scenario, the intended tag of the message is thus considered to be t_intended = (t.time + d,t.microstep)
. At the receiving end, the tag of the remote federate will be t'
, where it is possible that t != t'
. Similar to physical actions, there will be two scenarios:
t_intended > t'
: In this scenario, the original intended tag is in the future and thus can be honored.
t_intended <= t'
: In this scenario, the original intended tag cannot be feasibly honored on the receiver without breaking the causality between past events (or events currently in process) and future events. In this case, a new tag must be assigned to the message. For consistency, physical connections will follow physical actions, and assign t_new = (T',0)
(where T is the physical time at the receiver and t'.time < T'
). In this case, a tardiness has occurred and the calculated value would be (T1 - t.time - d,0)
. In code, this tardiness can be accessed on the input port of the reaction at the receiver by accessing port->tardiness
. See DistributedCountDecentralized.lf for a more concrete example of this scenario. Alternatively, the Tardy
handler could be used as an alternative to the original reaction.
As was mentioned in the previous section, federates can use a logical connection (->
) to send message to each other over the network. By definition, logical connections differ from physical connections in that they will make a concerted effort to keep and apply the original intended tag of the message.
However, the network channel is inherently unreliable. To remedy this limitation, by default, messages exchanged between the federates will go through the runtime infrastructure (RTI) and each federate will ask the RTI before advancing its logical time. This mechanism ensures that tardiness will never occur. In code, this mode can be explicitly enabled by setting the coordination
target property to centralized
(although this is the default). For a more concrete example, see DistributedCount.lf.
However, the federated synchronized barrier on logical time might add extra overhead for certain applications. This barrier on logical time can be eliminated by using the decentralized
coordination. To clarify this mode of coordination, imagine a scenario where the sender with current logical tag t
assigns a tag t_intended = (t.time + d, t.microstep)
to an outgoing message. At the receiving end with a logical tag t'
, similar to the case for physical connections, two scenarios can arise:
t_intended > t'
: In this scenario, the original intended tag is in the future and thus can be honored. Specifically, either the delay d
(specified using an after
) is sufficiently large to cover the inherent latencies (and variations) in such a system or the receiver, via an alternative mechanism, has been able to hold its logical time t'
long enough to receive this message. This alternative mechanism is beyond the scope of this document. For more detailed description on how this can be achieved and the inherent latencies involved, see Ptides.
t_intended <= t'
: In this scenario, the spirit of logical connections has been violated since the intended tag of the message cannot be honored. Instead, an alternative tag must be assigned to the incoming message. Because logical connections are considered a mission-critical component, this tag will be the smallest possible tag, namely, t'_new = (t'.time, t'.microstep + 1)
. In this case, a tardiness has occurred with a tardiness
amount equal to t'_new - t_intended
. In code, this tardiness can be accessed on the input port of the reaction at the receiver by accessing port->tardiness
. See DistributedCountDecentralized.lf for a more concrete example. Alternatively, the Tardy
handler could be used as an alternative to the original reaction.
To facilitate handling of tardiness in a unified manner, a Tardy
handler has been added to the language, where it can be used as an alternative reaction body to a reaction:
reaction(in) {=
// Code that can assume
// no tardiness has occured.
=} tardy {=
// Code that will deal
// with tardiness.
=}
What is unique to tardy
is that it is an optional modifier even if tardiness
is present in the system. If a Tardy
handler is added to a reaction and a tardiness
value is present, the Tardy
handler will be invoked instead of the original reaction.
In other words, the presence of the tardy
handler can facilitate an assumption that the body of the original reaction can be executed in a such a way that assumes a tardiness will never occur. If a tardiness
value is present and it is not handled in a tardy
handler, the tardiness
value will be propagated downstream because the aforementioned assumption is also violated for every downstream reaction triggered by the original reaction.
For more examples of using the tardy
handler on the aforementioned scenarios, see:
Physical Connections
DistributedCountPhysicalLate.lf
DistributedCountPhysicalDecentralized.lf
DistributedCountPhysicalDecentralizedLate.lf
Logical Connections
DistributedCountDecentralizedLate.lf