Skip to content

Latest commit

 

History

History
229 lines (174 loc) · 9.65 KB

README.md

File metadata and controls

229 lines (174 loc) · 9.65 KB
Raw

registry-cache

A container/docker registry cache. This runs one or many containers registry as a pull-through cache. Includes a process as a cleaner to control the max size. It allows private registries with credentials.

The container is a container that running some processes via supervisord:

  • registry: based on official registry v2 with an starting script to generate registry config with quay.io cache enabled. Credential are extracted from pull-secret.json
  • logger: which takes the container images requests and update the access time of the layers (blobs) and the manifests, in order to control the aging of them.
  • cleaner: sort blobs by access time an remove oldest blobs until used size of registry was between limits.
  • haproxy: reverse proxy for differents registries running (haproxy 1.8). Its redirect to the registry cache according to the path.
  • rsyslogd: to be able to have logs from haproxy
  • registries in pull through cache mode: every registry specified in pull-secret.json file will be used to run up an registry pull-through cache mode registry.

For example, if you want to cache a quay image instead of pulling quay.io/podman/hello:latest, you will pull yourregistry.local/quay.io/podman/hello:latest

Architecture

                                ┌───────────────────┐
                                │                   ├─────────┐
┌──────────────────┐    ┌──────►│  Registry cache 1 ├────┐    │             datastore
│    HAProxy       ├────┘       └───────────────────┘    │    │         ┌─────────────────────┐
│                  │                                     │    └────────►│                     │
│ (reverse proxy)  ├───────┐    ┌───────────────────┐    │              │  blobs & manifests  │
└────────┬───────┬─┘       │    │                   ├────┼─────────────►│                     │
         │       │         └───►│  Registry cache 2 │────│              └─────────────────────┘
         │       │              └───────────────────┘    │               ▲    ▲    ▲
         │       │              ....                     │               │    │    │
         │       │              ┌───────────────────┐    │               │    │    │
         │       │              │                   │────│               │    │    │
         │       └─────────────►│  Registry cache n ├────┼───────────────┘    │    │
         │                      └───────────────────┘    │                    │    │
         │                                               │                    │    │
         │                                               │                    │    │
         ▼                                               ▼                    │    │
 ┌─────────────────┐                                ┌───────────────────┐     │    │
 │                 │                                │                   │     │    │
 │  RSYSLOG        │                                │   LOGGER          ├─────┘    │
 │                 │                                │                   │          │
 └─────────────────┘                                └───────────────────┘          │
                                                                                   │
                                                    ┌───────────────────┐          │
                                                    │                   │          │
                                                    │   CLEANER         ├──────────┘
                                                    │                   │
                                                    └───────────────────┘

Deployment

1.- Install podman

# yum install -y podman httpd-tools

2.- Generate folders

# mkdir -p /opt/registry/{auth,certs,data}
  • The Auth subdirectory stores the htpasswd file used for authentication.
  • The Certs subdirectory stores certificates used by the registry for authentication.
  • The Data directory stores the actual images stored in the registry.

3.- Generate credentials for the registry (optional)

# htpasswd -bBc /opt/registry/auth/htpasswd registryuser registryuserpassword

4.- Generate TLS certificates and PEM file

# openssl req -newkey rsa:4096 -nodes -sha256 -keyout /opt/registry/certs/domain.key -x509 -days 365 -out /opt/registry/certs/domain.crt

Enter the respective options for your certificate. The CN= value is the hostname of your host. The host's hostname should be resolvable by DNS or the /etc/hosts file.

and then build the .pem file:

cat /opt/registry/certs/domain.crt /opt/registry/certs/domain.key > /certs/certs.pem

IMPORTANT: the name of the PEM must be certs.pem

The certificate will also have to be trusted by your hosts and clients:

# cp /opt/registry/certs/domain.crt /etc/pki/ca-trust/source/anchors/
# update-ca-trust
# trust list | grep -i "<hostname>"

5.- Create a pull-secret.json file

The container and its config process analyze the pull secret JSON file provided and create a registry process per each credential according to it. The format of this JSON file is similar to kubernetes uses. Example:

{
   "auths":{
      "docker.io":{
      },     
      "registry.redhat.io":{
         "auth":"b3Blb=",
         "email":"you@example.com"
      },
      "quay.io":{
         "auth":"b3Blb=",
         "email":"you@example.com"
      }
   }
}

With this example, the container will cache images from quay.io and registry.redhat.io.

It's important you map your pull secret to /pull-secret.json into the container.

6.- Start registry

There are two ways, with podman play feature or just with podman run:

with podman play

Edit variables in deployment.yaml and run:

podman play kube deployment.yaml

with podman

podman run -d --name registry-cache \
  -v /opt/registry/pull-secret.json:/pull-secret.json \
  -v /opt/registry/data:/var/lib/registry:z \
  -e CLEANER_MAXSIZE=10G \
  -e CLEANER_THRESHOLD_PERCENTAGE=20 \
  -e CLEANER_RUNEVERY_TIME=30m \
  -v /opt/registry/certs:/certs:z \
  -v /opt/registry/auth:/auth:z  
  -e "REGISTRY_AUTH=htpasswd" \
  -e "REGISTRY_AUTH_HTPASSWD_REALM=Registry Realm" \
  -e REGISTRY_AUTH_HTPASSWD_PATH=/auth/htpasswd \  
  -p 8443:8443 \
  quay.io/mvalledi/registry-cache:main

Tear Down

podman play kube deployment.yaml --down

or

podman stop registry-cache

Configuration ENV vars

  • CLEANER_MAXSIZE: Max Size in human redeable size (M, MB, MiB, G, GB, GiB, ...). By default "10G"
  • CLEANER_THRESHOLD_PERCENTAGE: Percentage threshold. If cache takes more than CLEANER_MAXSIZE + CLEANER_THRESHOLD_PERCENTAGE%, then cleaner cleans. By default '20' (== 20%).
  • CLEANER_RUNEVERY_TIME:Cleaner check every CLEANER_RUNEVERY_TIME the cache size. In format "1h2m3s". By default "30m" (== 30 minutes).
  • IGNOREREGISTRYLIST: Space separated list of registries to be ignored from pull secret. By default 'cloud.openshift.com'.

Firewall config

If a firewall is running on the hosts, the exposed port (8443) will need to be permitted.

# # Registry port
# firewall-cmd --add-port=8443/tcp --zone=internal --permanent
# firewall-cmd --add-port=8443/tcp --zone=public --permanent
# firewall-cmd --reload

Verify

We will try to pull quay.io/podman/hello image through our registry

# podman login <hostname>:8443
Enter Username:xxxxxxxx
Enter Password:yyyyyyyy
Login Succeeded!

# podman pull <hostname>:8443/quay.io/podman/hello
Trying to pull <hostname>:8443/quay.io/podman/hello:latest...
Getting image source signatures
Copying blob 35e2aab76e8b done  
Copying config 133ff45f55 done  
Writing manifest to image destination
Storing signatures
133ff45f557da063a1f6f301866c7276c22ea07aeda078d00a790ea50516dcbc

Image

Image is building by Quay.io. You can find it in https://quay.io/repository/mvalledi/registry-cache

Configure in Openshift

You can configure your Openshift Cluster to be able to use this registry cache instance applying this yaml file:

apiVersion: operator.openshift.io/v1alpha1
kind: ImageContentSourcePolicy
metadata:
  name: mirror-ocp
spec:
  repositoryDigestMirrors:
  - mirrors:
    - <your registry hostname>:8443/quay.io/openshift-release-dev/ocp-release
    source: quay.io/openshift-release-dev/ocp-release
  - mirrors:
    - <your registry hostname>:8443/quay.io/openshift-release-dev/ocp-v4.0-art-dev
    source: quay.io/openshift-release-dev/ocp-v4.0-art-dev

References: