Global utilities
Generic commands
Platform-related commands
- facebook (fb)
- hyphe
- instagram (insta)
- mediacloud (mc)
- telegram (tl)
- tiktok (tk)
- wikipedia (wiki)
- youtube (yt)
If you need help about a command, don't hesitate to use the -h/--help flag or the help command:
minet ct posts -h
# or:
minet ct posts --help
# or
minet help ct posts
To check the installed version of minet, you can use the --version flag:
minet --version
>>> minet x.x.x
Minet supports configuration files so you can skip some tedious command line arguments that you would need to provide each time you call minet otherwise (such as --key for youtube commands).
Those configuration files can be written in YAML or JSON and can either be passed to minet using the --rcfile argument or will be searched at the following paths (with this precedence):
./.minetrc{,.yml,.yaml,.json}~/.minetrc{,.yml,.yaml,.json}
Configuration file
---
facebook:
cookie: "MY_FACEBOOK_COOKIE" # Used as --cookie for `minet fb` commands
instagram:
cookie: "MY_INSTAGRAM_COOKIE" # Used as --cookie for `minet insta` commands
mediacloud:
token: "MY_MC_TOKEN" # Used as --token for `minet mc` commands
tiktok:
cookie: "MY_TIKTOK_COOKIE" # Used as --cookie for `minet tk` commands
twitter:
cookie: "MY_TWITTER_COOKIE" # Used as --cookie for `minet tw scrape` command
api_key: "MY_API_KEY" # Used as --api-key for `minet tw` commands
api_secret_key: "MY_API_SECRET_KEY" # Used as --api-secret-key for `minet tw` commands
access_token: "MY_ACCESS_TOKEN" # Used as --access-token for `minet tw` commands
access_token_secret: "MY_ACCESS_TOKEN_SECRET" # Used as --access-token-secret for `minet tw` commands
youtube:
key: "MY_YT_API_KEY" # Used as --key for `minet yt` commandsAlternatively you can also set some arguments using environment variables whose name starts with MINET_ and followed by the proper key.
To build the name of the variable, first check what can be configured in a minet rcfile and build your variable name by joining its path using an underscore:
For instance, to override facebook.cookie, the variable will be MINET_FACEBOOK_COOKIE.
If one of the path's key already contains underscore, it will work all the same. So to override twitter.api_key, the variable will be MINET_TWITTER_API_KEY.
Note that the given variable will be cast to the proper type as if it was passed as a command line argument.
Finally note that command line arguments and flags will take precedence over environment variables, and that environment variables will take precedence over any rcfile configuration, but you can of course mix and match.
Usage: minet cookies [-h] [--silent] [--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--csv] [--url URL] [-o OUTPUT]
{brave,chrome,chromium,edge,firefox,opera,opera_gx,safari,vivaldi}
# Minet Cookies Command
Grab cookies directly from your browsers to use them easily later
in python scripts, for instance.
Positional Arguments:
{brave,chrome,chromium,edge,firefox,opera,opera_gx,safari,vivaldi}
Name of the browser from which to grab cookies.
Options:
--csv Whether to format the output as CSV. If --url is
set, will output the cookie's morsels as CSV.
--url URL If given, only returns full cookie header value
for this url.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Dumping cookie jar from firefox:
$ minet cookies firefox > jar.txt
. Dumping cookies as CSV:
$ minet cookies firefox --csv > cookies.csv
. Print cookie for lemonde.fr:
$ minet cookies firefox --url https://www.lemonde.fr
. Dump cookie morsels for lemonde.fr as CSV:
$ minet cookies firefox --url https://www.lemonde.fr --csv > morsels.csv
Usage: minet crawl [-h] [-O OUTPUT_DIR] [--silent]
[--refresh-per-second REFRESH_PER_SECOND] [--simple-progress]
[--resume] [--max-depth MAX_DEPTH] [--throttle THROTTLE]
[--domain-parallelism DOMAIN_PARALLELISM] [-t THREADS] [-z]
[--compress-transfer] [-w] [-d]
[--folder-strategy FOLDER_STRATEGY] [-f {csv,jsonl,ndjson}]
[-v] [-u] [-n] [-k] [--spoof-user-agent] [-p PROCESSES]
[--connect-timeout CONNECT_TIMEOUT] [--timeout TIMEOUT]
[--retries RETRIES] [--stateful-redirects] [--pycurl]
[--sqlar] [-m MODULE] [--factory]
[--input-spider INPUT_SPIDER] [-i INPUT] [--explode EXPLODE]
[-s SELECT] [--total TOTAL]
[url_or_url_column]
# Minet Crawl Command
Run a crawl using a minet crawler or spiders defined
in a python module.
Positional Arguments:
url_or_url_column Single start url to process or name of the CSV
column containing start urls when using
-i/--input. Defaults to "url".
Options:
-z, --compress-on-disk Whether to compress the downloaded files when
saving files on disk.
--compress-transfer Whether to send a "Accept-Encoding" header
asking for a compressed response. Usually better
for bandwidth but at the cost of more CPU work.
--connect-timeout CONNECT_TIMEOUT
Maximum socket connection time to host. Defaults
to `5`.
--domain-parallelism DOMAIN_PARALLELISM
Max number of urls per domain to hit at the same
time. Defaults to `1`.
--factory Whether crawl target is a crawler factory
function.
--folder-strategy FOLDER_STRATEGY
Name of the strategy to be used to dispatch the
retrieved files into folders to alleviate issues
on some filesystems when a folder contains too
much files. Note that this will be applied on
top of --filename-template. All of the
strategies are described at the end of this
help. Defaults to `flat`.
-f, --format {csv,jsonl,ndjson}
Serialization format for scraped/extracted data.
Defaults to `csv`.
--input-spider INPUT_SPIDER Name of the spider that will process jobs given
using -i/--input.
-k, --insecure Whether to allow ssl errors when performing
requests or not.
--max-depth MAX_DEPTH Maximum depth for the crawl.
-m, --module MODULE Python module to import to use as spider,
spiders or crawler factory. Suffix it with `:`
to give actual target within module e.g.
`package.module:spider`.
-n, --normalized-url-cache Whether to normalize url cache used to assess if
some url was already visited.
-O, --output-dir OUTPUT_DIR Output directory. Defaults to `crawl`.
-p, --processes PROCESSES Number of processes for the crawler process
pool.
--pycurl Whether to use the pycurl library to perform the
calls.
--retries RETRIES Number of times to retry on timeout & common
network-related issues. Defaults to `0`.
--spoof-user-agent Whether to use a plausible random "User-Agent"
header when making requests.
--sqlar Whether to write files into a single-file sqlite
archive rather than as individual files on the
disk.
--stateful-redirects Whether to keep a cookie jar while redirecting
and allowing self redirections that track state.
-t, --threads THREADS Number of threads to use. Will default to a
conservative number, based on the number of
available cores. Feel free to increase.
--throttle THROTTLE Time to wait - in seconds - between 2 calls to
the same domain. Defaults to `0.2`.
--timeout TIMEOUT Maximum time - in seconds - to spend for each
request before triggering a timeout. Defaults to
`30`.
-v, --verbose Whether to print information about crawl
results.
-u, --visit-urls-only-once Whether to ensure that any url will only be
visited once.
-d, --write-data, -D, --dont-write-data
Whether to write scraped/extracted data on disk.
Defaults to `True`.
-w, --write-files Whether to write downloaded files on disk in
order to save them for later.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the start urls you want to process. Will
consider `-` as stdin.
--resume Whether to resume an interrupted crawl.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
--folder-strategy options:
. "flat": default choice, all files will be written in the indicated
content folder.
. "fullpath": all files will be written in a folder consisting of the
url hostname and then its path.
. "prefix-x": e.g. "prefix-4", files will be written in folders
having a name that is the first x characters of the file's name.
This is an efficient way to partition content into folders containing
roughly the same number of files if the file names are random (which
is the case by default since md5 hashes will be used).
. "hostname": files will be written in folders based on their url's
full host name.
. "normalized-hostname": files will be written in folders based on
their url's hostname stripped of some undesirable parts (such as
"www.", or "m.", for instance).
. "fingerprinted-hostname": files will be written in folders based on
their url's hostname stripped of some more undesirable parts (such as
"fr.", for instance) and their public suffix will be dropped.
Examples:
. Using the most basic crawler following HTML links:
$ minet crawl url -i urls.csv --max-depth 1
. Crawling using the `process` function from the `crawl` module:
$ minet crawl -m crawl:process -O crawl-data
Notes regarding sqlite storage temporary files:
If you spawn a persistent crawler, some of its state will be kept using
specialized sqlite databases on disk.
Be aware that sqlite sometimes need to perform cleanup operations that rely
on temporary files that will be written in a folder configured as the
`SQLITE_TMPDIR` env variable. Be sure to set this variable when running this
command, especially when the crawler files will be stored on a different disk
and if writing in the host's `/tmp` directory can be risky due to insufficient
storage available.
For more info, check out: https://www.sqlite.org/tempfiles.html
Usage: minet focus-crawl [-h] [-C CONTENT_FILTER] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-U URL_FILTER]
[--invert-content-match] [--invert-url-match]
[--extract] [--irrelevant-continue] [--only-html]
[--extraction-fields EXTRACTION_FIELDS] [-O OUTPUT_DIR]
[--resume] [--max-depth MAX_DEPTH]
[--throttle THROTTLE]
[--domain-parallelism DOMAIN_PARALLELISM] [-t THREADS]
[-z] [--compress-transfer] [-w] [-d]
[--folder-strategy FOLDER_STRATEGY]
[-f {csv,jsonl,ndjson}] [-v] [-n] [-k]
[--spoof-user-agent] [-p PROCESSES]
[--connect-timeout CONNECT_TIMEOUT] [--timeout TIMEOUT]
[--retries RETRIES] [--stateful-redirects] [--pycurl]
[--sqlar] [--input-spider INPUT_SPIDER] [-i INPUT]
[--explode EXPLODE] [-s SELECT] [--total TOTAL]
[url_or_url_column]
# Minet Focus Crawl Command
Minet crawl feature with the possibility
to use regular expressions to filter content.
Regex are not case sensitive, but
accents sensitive.
Regex must be written between simple quotes.
Positional Arguments:
url_or_url_column Single start url to process or name of the CSV
column containing start urls when using
-i/--input. Defaults to "url".
Options:
-z, --compress-on-disk Whether to compress the downloaded files when
saving files on disk.
--compress-transfer Whether to send a "Accept-Encoding" header
asking for a compressed response. Usually better
for bandwidth but at the cost of more CPU work.
--connect-timeout CONNECT_TIMEOUT
Maximum socket connection time to host. Defaults
to `5`.
-C, --content-filter CONTENT_FILTER
Regex used to filter fetched content.
--domain-parallelism DOMAIN_PARALLELISM
Max number of urls per domain to hit at the same
time. Defaults to `1`.
--extract Perform regex match on extracted text content
instead of html content using the Trafilatura
library.
--extraction-fields EXTRACTION_FIELDS
Fields of the trafilatura extraction you want to
apply the content filter on, separated using
commas. It must be used with the flag
`--extract`. Available flags are:
`canonical_url`, `title`, `description`,
`content`, `comments`, `author`, `categories`,
`tags`, `date` and `sitename`.
--folder-strategy FOLDER_STRATEGY
Name of the strategy to be used to dispatch the
retrieved files into folders to alleviate issues
on some filesystems when a folder contains too
much files. Note that this will be applied on
top of --filename-template. All of the
strategies are described at the end of this
help. Defaults to `flat`.
-f, --format {csv,jsonl,ndjson}
Serialization format for scraped/extracted data.
Defaults to `csv`.
--input-spider INPUT_SPIDER Name of the spider that will process jobs given
using -i/--input.
-k, --insecure Whether to allow ssl errors when performing
requests or not.
--invert-content-match Flag to turn the content filter into an
exclusion rule.
--invert-url-match Flag to turn the url filter into an exclusion
rule.
--irrelevant-continue Continue exploration whether met content is
relevant or not.
--max-depth MAX_DEPTH Maximum depth for the crawl.
-n, --normalized-url-cache Whether to normalize url cache used to assess if
some url was already visited.
--only-html Add URLs to the crawler queue only if they seem
to lead to a HTML content.
-O, --output-dir OUTPUT_DIR Output directory. Defaults to `crawl`.
-p, --processes PROCESSES Number of processes for the crawler process
pool.
--pycurl Whether to use the pycurl library to perform the
calls.
--retries RETRIES Number of times to retry on timeout & common
network-related issues. Defaults to `0`.
--spoof-user-agent Whether to use a plausible random "User-Agent"
header when making requests.
--sqlar Whether to write files into a single-file sqlite
archive rather than as individual files on the
disk.
--stateful-redirects Whether to keep a cookie jar while redirecting
and allowing self redirections that track state.
-t, --threads THREADS Number of threads to use. Will default to a
conservative number, based on the number of
available cores. Feel free to increase.
--throttle THROTTLE Time to wait - in seconds - between 2 calls to
the same domain. Defaults to `0.2`.
--timeout TIMEOUT Maximum time - in seconds - to spend for each
request before triggering a timeout. Defaults to
`30`.
-U, --url-filter URL_FILTER Regex used to filter URLs added to crawler's
queue.
-v, --verbose Whether to print information about crawl
results.
-d, --write-data, -D, --dont-write-data
Whether to write scraped/extracted data on disk.
Defaults to `True`.
-w, --write-files Whether to write downloaded files on disk in
order to save them for later.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the start urls you want to process. Will
consider `-` as stdin.
--resume Whether to resume an interrupted crawl.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
--folder-strategy options:
. "flat": default choice, all files will be written in the indicated
content folder.
. "fullpath": all files will be written in a folder consisting of the
url hostname and then its path.
. "prefix-x": e.g. "prefix-4", files will be written in folders
having a name that is the first x characters of the file's name.
This is an efficient way to partition content into folders containing
roughly the same number of files if the file names are random (which
is the case by default since md5 hashes will be used).
. "hostname": files will be written in folders based on their url's
full host name.
. "normalized-hostname": files will be written in folders based on
their url's hostname stripped of some undesirable parts (such as
"www.", or "m.", for instance).
. "fingerprinted-hostname": files will be written in folders based on
their url's hostname stripped of some more undesirable parts (such as
"fr.", for instance) and their public suffix will be dropped.
Examples:
. Running a simple crawler:
$ minet focus-crawl url -i urls.csv --content-filter '(?:assembl[ée]e nationale|s[ée]nat)' -O ./result
Notes regarding sqlite storage temporary files:
If you spawn a persistent crawler, some of its state will be kept using
specialized sqlite databases on disk.
Be aware that sqlite sometimes need to perform cleanup operations that rely
on temporary files that will be written in a folder configured as the
`SQLITE_TMPDIR` env variable. Be sure to set this variable when running this
command, especially when the crawler files will be stored on a different disk
and if writing in the host's `/tmp` directory can be risky due to insufficient
storage available.
For more info, check out: https://www.sqlite.org/tempfiles.html
Usage: minet fetch [-h] [--domain-parallelism DOMAIN_PARALLELISM] [--silent]
[--refresh-per-second REFRESH_PER_SECOND] [--simple-progress]
[-t THREADS] [--throttle THROTTLE]
[--url-template URL_TEMPLATE] [--timeout TIMEOUT]
[-g {brave,chrome,chromium,edge,firefox,opera,opera_gx,safari,vivaldi}]
[-H HEADERS] [-k] [-X METHOD] [-x PROXY] [--spoof-user-agent]
[--retries RETRIES] [-f FILENAME_COLUMN]
[--filename-template FILENAME_TEMPLATE]
[--folder-strategy FOLDER_STRATEGY] [-O OUTPUT_DIR]
[--max-redirects MAX_REDIRECTS] [-z] [--compress-transfer]
[-c] [-D] [--keep-failed-contents] [--standardize-encoding]
[--only-html] [--pycurl] [--sqlar] [-i INPUT]
[--explode EXPLODE] [-s SELECT] [--total TOTAL] [--resume]
[-o OUTPUT]
url_or_url_column
# Minet Fetch Command
Use multiple threads to fetch batches of urls from a CSV file. The
command outputs a CSV report with additional metadata about the
HTTP calls and will generally write the retrieved files in a folder
given by the user.
Positional Arguments:
url_or_url_column Single url to process or name of the CSV column
containing urls when using -i/--input.
Options:
-z, --compress-on-disk Whether to compress the contents.
--compress-transfer Whether to send a "Accept-Encoding" header
asking for a compressed response. Usually better
for bandwidth but at the cost of more CPU work.
-c, --contents-in-report Whether to include retrieved contents, e.g.
html, directly in the report and avoid writing
them in a separate folder. This requires to
standardize encoding and won't work on binary
formats.
--domain-parallelism DOMAIN_PARALLELISM
Max number of urls per domain to hit at the same
time. Defaults to `1`.
-f, --filename-column FILENAME_COLUMN
Name of the column used to build retrieved file
names. Defaults to a md5 hash of final url. If
the provided file names have no extension (e.g.
".jpg", ".pdf", etc.) the correct extension will
be added depending on the file type.
--filename-template FILENAME_TEMPLATE
A template for the name of the fetched files.
--folder-strategy FOLDER_STRATEGY
Name of the strategy to be used to dispatch the
retrieved files into folders to alleviate issues
on some filesystems when a folder contains too
much files. Note that this will be applied on
top of --filename-template. All of the
strategies are described at the end of this
help. Defaults to `flat`.
-g, --grab-cookies {brave,chrome,chromium,edge,firefox,opera,opera_gx,safari,vivaldi}
Whether to attempt to grab cookies from your
computer's browser (supports "firefox",
"chrome", "chromium", "opera" and "edge").
-H, --header HEADERS Custom headers used with every requests.
-k, --insecure Whether to allow ssl errors when performing
requests or not.
--keep-failed-contents Whether to keep & write contents for failed
(i.e. non-200) http requests.
--max-redirects MAX_REDIRECTS
Maximum number of redirections to follow before
breaking. Defaults to `10`.
--only-html Only download urls if they are not unambiguously
not html (e.g. if the url has the .pdf or .jpg
extension etc.). Then, if the url was
downloaded, it will only be written on disk if
the http body actually looks like html.
-O, --output-dir OUTPUT_DIR Directory where the fetched files will be
written. Defaults to `downloaded`.
-x, --proxy PROXY Proxy server to use.
--pycurl Whether to use the pycurl library to perform the
calls.
-X, --request METHOD The http method to use. Will default to GET.
Defaults to `GET`.
--retries RETRIES Number of times to retry on timeout & common
network-related issues. Defaults to `0`.
-D, --dont-save Use not to write any downloaded file on disk.
--spoof-user-agent Whether to use a plausible random "User-Agent"
header when making requests.
--sqlar Whether to write files into a single-file sqlite
archive rather than as individual files on the
disk.
--standardize-encoding Whether to systematically convert retrieved text
to UTF-8.
-t, --threads THREADS Number of threads to use. Will default to a
conservative number, based on the number of
available cores. Feel free to increase.
--throttle THROTTLE Time to wait - in seconds - between 2 calls to
the same domain. Defaults to `0.2`.
--timeout TIMEOUT Maximum time - in seconds - to spend for each
request before triggering a timeout. Defaults to
~30s.
--url-template URL_TEMPLATE A template for the urls to fetch. Handy e.g. if
you need to build urls from ids etc.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the urls you want to process. Will consider `-`
as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--resume "Whether to resume from an aborted collection.
Need -o to be set.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Columns being added to the output:
. "original_index": index of the line in the original file (the output will be
arbitrarily ordered since multiple requests are performed concurrently).
. "resolved_url": final resolved url (after templating & solving redirects).
. "http_status": HTTP status code of the request, e.g. 200, 404, 503 etc.
. "datetime_utc": datetime when the response was finished.
. "fetch_error": an error code if anything went wrong when performing the request.
. "path": path to the downloaded file, relative to the folder given
through -O/--output-dir.
. "mimetype": detected mimetype of the requested file.
. "encoding": detected encoding of the requested file if relevant.
. "body_size": size of the downloaded document in bytes.
. "body": if -c/--contents-in-report is set, will contain the
downloaded text and the files won't be written to disk.
--folder-strategy options:
. "flat": default choice, all files will be written in the indicated
content folder.
. "fullpath": all files will be written in a folder consisting of the
url hostname and then its path.
. "prefix-x": e.g. "prefix-4", files will be written in folders
having a name that is the first x characters of the file's name.
This is an efficient way to partition content into folders containing
roughly the same number of files if the file names are random (which
is the case by default since md5 hashes will be used).
. "hostname": files will be written in folders based on their url's
full host name.
. "normalized-hostname": files will be written in folders based on
their url's hostname stripped of some undesirable parts (such as
"www.", or "m.", for instance).
. "fingerprinted-hostname": files will be written in folders based on
their url's hostname stripped of some more undesirable parts (such as
"fr.", for instance) and their public suffix will be dropped.
Examples:
. Fetching a single url (can be useful when piping):
$ minet fetch "https://www.lemonde.fr"
. Fetching a batch of url from existing CSV file:
$ minet fetch url -i file.csv > report.csv
. Piping to minet extract:
$ minet fetch url -i file.csv -c | minet extract -i -
. CSV input from stdin (mind the `-`):
$ xan select url file.csv | minet fetch url -i - > report.csv
. Downloading files in specific output directory:
$ minet fetch url -i file.csv -O html > report.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet fetch "value"
. Here is how to use a command with a CSV file:
$ minet fetch column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet fetch column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet fetch column_name -i file.csv --explode "|"
. This also works with single values:
$ minet fetch "value1,value2" --explode ","
Usage: minet extract [-h] [-g] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-I INPUT_DIR] [-p PROCESSES]
[--chunk-size CHUNK_SIZE] [--body-column BODY_COLUMN]
[--error-column ERROR_COLUMN]
[--status-column STATUS_COLUMN]
[--encoding-column ENCODING_COLUMN]
[--mimetype-column MIMETYPE_COLUMN] [--encoding ENCODING]
[-u] [-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [--resume] [-o OUTPUT]
[path_or_path_column]
# Minet Extract Command
Use multiple processes to extract the main textual content and various
metadata item from large batches of HTML files easily and efficiently.
Extraction of main content is performed using the `trafilatura` library
by Adrien Barbaresi.
Please note that this kind of main content extraction is heavily geared
towards press articles and might not be suited to other kinds of web pages.
More information about the library can be found here:
https://github.com/adbar/trafilatura
Note that this command has been geared towards working in tandem with
the fetch command. This means the command expects, by default, CSV files
containing columns like "path", "http_status", "encoding" etc. that
you can find in a fetch command CSV report.
This said, you can of course feed this command any kind of CSV data,
and use dedicated flags such as --status-column, --body-column to
to inform the command about your specific table.
The command is also able to work on glob patterns, such as: "downloaded/**/*.html",
and can also be fed CSV columns containing HTML content directly if
required.
Positional Arguments:
path_or_path_column Single path to process or name of the CSV column
containing paths when using -i/--input. Defaults
to "path".
Options:
--body-column BODY_COLUMN Name of the CSV column containing html bodies.
Defaults to `body`.
--chunk-size CHUNK_SIZE Chunk size for multiprocessing. Defaults to `1`.
--encoding ENCODING Name of the default encoding to use. If not
given the command will infer it for you.
--encoding-column ENCODING_COLUMN
Name of the CSV column containing file encoding.
Defaults to `encoding`.
--error-column ERROR_COLUMN Name of the CSV column containing a fetch error.
Defaults to `fetch_error`.
-g, --glob Will interpret given paths as glob patterns to
resolve if given.
-I, --input-dir INPUT_DIR Directory where the HTML files are stored. Will
default to fetch default output directory.
--mimetype-column MIMETYPE_COLUMN
Name of the CSV column containing file mimetype.
Defaults to `mimetype`.
-p, --processes PROCESSES Number of processes to use. Defaults to roughly
half of the available CPUs.
--status-column STATUS_COLUMN
Name of the CSV column containing HTTP status.
Defaults to `http_status`.
-u, --unordered Whether to allow the result to be written in an
arbitrary order dependent on the multiprocessing
scheduling. Can improve performance.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the paths you want to process. Will consider `-`
as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--resume "Whether to resume from an aborted collection.
Need -o to be set.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Columns being added to the output:
. "extract_original_index": index of the line in the original file (the output will be
arbitrarily ordered since multiple requests are performed concurrently).
. "extract_error": any error that happened when extracting content.
. "canonical_url": canonical url of target html, extracted from
link.
. "title": title of the web page, from <title> usually.
. "description": description of the web page, as found in its
metadata.
. "content": main content of the web page as extracted.
. "comments": comment text whenever the heuristics succeeds in
identifying them.
. "author": inferred author of the web page article when found in
its metadata.
. "categories": list of categories extracted from the web page's
metadata, separated by "|".
. "tags": list of tags extracted from the web page's metadata,
separated by "|".
. "date": date of publication of the web page article when found in
its metadata.
. "sitename": canonical name as declared by the website.
Examples:
. Extracting content from a single file on disk:
$ minet extract ./path/to/file.html
. Extracting content from a `minet fetch` report:
$ minet extract -i report.csv -I downloaded > extracted.csv
. Extracting content from a single url:
$ minet fetch "https://lemonde.fr" | minet extract -i -
. Indicating a custom path column (e.g. "file"):
$ minet extract file -i report.csv -I downloaded > extracted.csv
. Extracting content from a CSV column containing HTML directly:
$ minet extract -i report.csv --body-column html > extracted.csv
. Extracting content from a bunch of files using a glob pattern:
$ minet extract "./content/**/*.html" --glob > extracted.csv
. Extracting content using a CSV file containing glob patterns:
$ minet extract pattern -i patterns.csv --glob > extracted.csv
. Working on a fetch report from stdin (mind the `-`):
$ minet fetch url file.csv | minet extract -i - -I downloaded > extracted.csv
Usage: minet resolve [-h] [--domain-parallelism DOMAIN_PARALLELISM] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-t THREADS] [--throttle THROTTLE]
[--url-template URL_TEMPLATE] [--timeout TIMEOUT]
[-g {brave,chrome,chromium,edge,firefox,opera,opera_gx,safari,vivaldi}]
[-H HEADERS] [-k] [-X METHOD] [-x PROXY]
[--spoof-user-agent] [--retries RETRIES]
[--max-redirects MAX_REDIRECTS] [--follow-meta-refresh]
[--follow-js-relocation] [--infer-redirection]
[--canonicalize] [--only-shortened] [-i INPUT]
[--explode EXPLODE] [-s SELECT] [--total TOTAL] [--resume]
[-o OUTPUT]
url_or_url_column
# Minet Resolve Command
Use multiple threads to resolve batches of urls from a CSV file. The
command outputs a CSV report with additional metadata about the
HTTP calls and the followed redirections.
Positional Arguments:
url_or_url_column Single url to process or name of the CSV column
containing urls when using -i/--input.
Options:
--canonicalize Whether to extract the canonical url from the
html source code of the web page if found.
Requires to buffer part of the response body, so
it will slow things down.
--domain-parallelism DOMAIN_PARALLELISM
Max number of urls per domain to hit at the same
time. Defaults to `1`.
--follow-js-relocation Whether to follow typical JavaScript window
relocation. Requires to buffer part of the
response body, so it will slow things down.
--follow-meta-refresh Whether to follow meta refresh tags. Requires to
buffer part of the response body, so it will
slow things down.
-g, --grab-cookies {brave,chrome,chromium,edge,firefox,opera,opera_gx,safari,vivaldi}
Whether to attempt to grab cookies from your
computer's browser (supports "firefox",
"chrome", "chromium", "opera" and "edge").
-H, --header HEADERS Custom headers used with every requests.
--infer-redirection Whether to try to heuristically infer
redirections from the urls themselves, without
requiring a HTTP call.
-k, --insecure Whether to allow ssl errors when performing
requests or not.
--max-redirects MAX_REDIRECTS
Maximum number of redirections to follow before
breaking. Defaults to `20`.
--only-shortened Whether to only attempt to resolve urls that are
probably shortened.
-x, --proxy PROXY Proxy server to use.
-X, --request METHOD The http method to use. Will default to GET.
Defaults to `GET`.
--retries RETRIES Number of times to retry on timeout & common
network-related issues. Defaults to `0`.
--spoof-user-agent Whether to use a plausible random "User-Agent"
header when making requests.
-t, --threads THREADS Number of threads to use. Will default to a
conservative number, based on the number of
available cores. Feel free to increase.
--throttle THROTTLE Time to wait - in seconds - between 2 calls to
the same domain. Defaults to `0.2`.
--timeout TIMEOUT Maximum time - in seconds - to spend for each
request before triggering a timeout. Defaults to
~30s.
--url-template URL_TEMPLATE A template for the urls to fetch. Handy e.g. if
you need to build urls from ids etc.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the urls you want to process. Will consider `-`
as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--resume "Whether to resume from an aborted collection.
Need -o to be set.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Columns being added to the output:
. "original_index": index of the line in the original file (the output will be
arbitrarily ordered since multiple requests are performed concurrently).
. "resolved_url": final resolved url (after solving redirects).
. "http_status": HTTP status code of the request, e.g. 200, 404, 503 etc.
. "resolution_error": an error code if anything went wrong when performing the request.
. "redirect_count": total number of redirections to reach the final url.
. "redirect_chain": list of redirection types separated by "|".
Examples:
. Resolving a batch of url from existing CSV file:
$ minet resolve url_column -i file.csv > report.csv
. CSV input from stdin (mind the `-`):
$ xan select url_column file.csv | minet resolve url_column - > report.csv
. Resolving a single url:
$ minet resolve https://lemonde.fr
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet fetch "value"
. Here is how to use a command with a CSV file:
$ minet fetch column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet fetch column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet fetch column_name -i file.csv --explode "|"
. This also works with single values:
$ minet fetch "value1,value2" --explode ","
For more documentation about minet's scraping DSL check this page from the Cookbook.
Usage: minet scrape [-h] [--silent] [--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-m] [-e] [-g] [-I INPUT_DIR]
[-p PROCESSES] [--chunk-size CHUNK_SIZE]
[--body-column BODY_COLUMN] [--url-column URL_COLUMN]
[--error-column ERROR_COLUMN]
[--status-column STATUS_COLUMN]
[--encoding-column ENCODING_COLUMN]
[--mimetype-column MIMETYPE_COLUMN] [--encoding ENCODING]
[--base-url BASE_URL] [-f {csv,jsonl,ndjson}]
[--plural-separator PLURAL_SEPARATOR] [--strain STRAIN] [-u]
[--scraped-column-prefix SCRAPED_COLUMN_PREFIX] [-i INPUT]
[--explode EXPLODE] [-s SELECT] [--total TOTAL] [-o OUTPUT]
scraper [path_or_path_column]
# Minet Scrape Command
Use multiple processes to scrape data from a batch of HTML files using
minet scraping DSL documented here:
https://github.com/medialab/minet/blob/master/docs/cookbook/scraping_dsl.md
or a python function given using the -m/--module flag, or a simple inline
python expression given using the -e/--eval flag, or an already implemented
typical scraping routine (listed below).
It will output the scraped items as a CSV or NDJSON file.
Note that this command has been geared towards working in tandem with
the fetch command. This means the command expects, by default, CSV files
containing columns like "path", "http_status", "encoding" etc. that
you can find in a fetch command CSV report.
This said, you can of course feed this command any kind of CSV data,
and use dedicated flags such as --status-column, --body-column to
to inform the command about your specific table.
The command is also able to work on glob patterns, such as: "downloaded/**/*.html",
and can also be fed CSV columns containing HTML content directly if
required.
Note that a scraper can be "singular", i.e. emitting a single item per scraped
HTML file, or "plural" if it can emit 0 or n items per file.
Know that, for convenience, "singular" scraper will always emit a line
per line in your input, contrary to "plural" ones. This means that sometimes
said lines will be empty because the scraper did not match anything or if
an error occurred.
Positional Arguments:
scraper Path to a scraper definition file, or name of a
builtin scraper, e.g. "title" (see the complete
list below), or a path to a python module and
function (e.g. scraper.py,
scraper.py:scrape_title).
path_or_path_column Single path to process or name of the CSV column
containing paths when using -i/--input. Defaults
to "path".
Options:
--base-url BASE_URL Base url to use if --url-column is not valid.
--body-column BODY_COLUMN Name of the CSV column containing html bodies.
Defaults to `body`.
--chunk-size CHUNK_SIZE Chunk size for multiprocessing. Defaults to `1`.
--encoding ENCODING Name of the default encoding to use. If not
given the command will infer it for you.
--encoding-column ENCODING_COLUMN
Name of the CSV column containing file encoding.
Defaults to `encoding`.
--error-column ERROR_COLUMN Name of the CSV column containing a fetch error.
Defaults to `fetch_error`.
-e, --eval Whether given scraper should be a simple
expression to evaluate.
-f, --format {csv,jsonl,ndjson}
Output format. Defaults to `csv`.
-g, --glob Will interpret given paths as glob patterns to
resolve if given.
-I, --input-dir INPUT_DIR Directory where the HTML files are stored. Will
default to fetch default output directory.
--mimetype-column MIMETYPE_COLUMN
Name of the CSV column containing file mimetype.
Defaults to `mimetype`.
-m, --module Whether given scraper is a python target to
import.
--plural-separator PLURAL_SEPARATOR
Separator use to join lists of values when
serializing to CSV. Defaults to `|`.
-p, --processes PROCESSES Number of processes to use. Defaults to roughly
half of the available CPUs.
--scraped-column-prefix SCRAPED_COLUMN_PREFIX
Prefix to prepend to the names of columns added
by the scraper so they can be easily
distinguished from columns of the input.
--status-column STATUS_COLUMN
Name of the CSV column containing HTTP status.
Defaults to `http_status`.
--strain STRAIN Optional CSS selector used to strain, i.e. only
parse matched tags in the parsed html files in
order to optimize performance.
-u, --unordered Whether to allow the result to be written in an
arbitrary order dependent on the multiprocessing
scheduling. Can improve performance.
--url-column URL_COLUMN Name of the CSV column containing the url.
Defaults to `resolved_url`.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the paths you want to process. Will consider `-`
as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Builtin scrapers:
. "canonical": scrape the <link rel="canonical"> tag href if any.
. "metas": scrape the <meta> tags if any.
. "rss": scrape the RSS feed urls if any.
. "title": scrape the <title> tag if any.
. "urls": scrape all the relevant <a> tag href urls. Will join them
with the correct base url if --url-column is valid.
. "images": scrape all the relevant <img> tag src urls. Will join them
with the correct base url if --url-column is valid.
. "europresse": scrape the articles from europresse HTML files.
Examples:
. Scraping a single file on disk:
$ minet scrape scraper.yml ./path/to/file.html
. Scraping a `minet fetch` report:
$ minet scrape scraper.yml -i report.csv -I downloaded > scraped.csv
. Scraping a single url:
$ minet fetch "https://lemonde.fr" | minet scrape scraper.yml -i -
. Using a builtin scraper:
$ minet scrape title -i report.csv > titles.csv
. Using the `scrape` (default) function of target python module:
$ minet scrape -m scraper.py -i report.csv > titles.csv
. Using the `scrape_title` function of target python module:
$ minet scrape -m scraper.py:scrape_title -i report.csv > titles.csv
. Using an inline python expression to evaluate:
$ minet scrape -e 'soup.scrape_one("title")' -i report.csv > titles.csv
. Indicating a custom path column (e.g. "file"):
$ minet scrape scraper.yml file -i report.csv -I downloaded > scraped.csv
. Scraping a CSV column containing HTML directly:
$ minet scrape scraper.yml -i report.csv --body-column html > scraped.csv
. Scraping a bunch of files using a glob pattern:
$ minet scrape scraper.yml "./content/**/*.html" --glob > scraped.csv
. Scraping using a CSV file containing glob patterns:
$ minet scrape scraper.yml pattern -i patterns.csv --glob > scraped.csv
. Working on a fetch report from stdin (mind the `-`):
$ minet fetch url file.csv | minet scrape scraper.yml -i - -I downloaded > scraped.csv
. Yielding items as newline-delimited JSON (jsonl):
$ minet scrape scraper.yml -i report.csv --format jsonl > scraped.jsonl
. Using a strainer to optimize performance:
$ minet scrape links-scraper.yml --strain "a" -i report.csv > links.csv
. Keeping only some columns from input CSV file:
$ minet scrape scraper.yml -i report.csv -s name,url > scraped.csv
Usage: minet screenshot [-h] [--domain-parallelism DOMAIN_PARALLELISM]
[--silent] [--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-t THREADS] [--throttle THROTTLE]
[--url-template URL_TEMPLATE] [--timeout TIMEOUT]
[-f FILENAME_COLUMN]
[--filename-template FILENAME_TEMPLATE]
[--folder-strategy FOLDER_STRATEGY] [-O OUTPUT_DIR]
[--full-page] [--width WIDTH] [--height HEIGHT]
[--wait-until {commit,domcontentloaded,load,networkidle}]
[--adblock] [--automatic-consent] [--wait WAIT]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [--resume] [-o OUTPUT]
url_or_url_column
# Minet Screenshot Command
Use multithreaded browser emulation to screenshot batches of urls
from a CSV file. The command outputs a CSV report with additional
metadata about the HTTP calls and the produced screenshots on disk.
Positional Arguments:
url_or_url_column Single url to process or name of the CSV column
containing urls when using -i/--input.
Options:
--adblock Whether to use the ublock-origin browser
extension.
--automatic-consent Whether to use the "I still don't care about
cookies" browser extension to try and get rid of
GDPR/cookies consent forms when screenshotting.
--domain-parallelism DOMAIN_PARALLELISM
Max number of urls per domain to hit at the same
time. Defaults to `1`.
-f, --filename-column FILENAME_COLUMN
Name of the column used to build retrieved file
names. Defaults to a md5 hash of final url. If
the provided file names have no extension (e.g.
".jpg", ".pdf", etc.) the correct extension will
be added depending on the file type.
--filename-template FILENAME_TEMPLATE
A template for the name of the fetched files.
--folder-strategy FOLDER_STRATEGY
Name of the strategy to be used to dispatch the
retrieved files into folders to alleviate issues
on some filesystems when a folder contains too
much files. Note that this will be applied on
top of --filename-template. All of the
strategies are described at the end of this
help. Defaults to `flat`.
--full-page Whether to create full page screenshots.
--height HEIGHT Page height in pixels. Defaults to `1080`.
-O, --output-dir OUTPUT_DIR Directory where the screenshots will be written.
Defaults to `screenshots`.
-t, --threads THREADS Number of threads to use. Will default to a
conservative number, based on the number of
available cores. Feel free to increase.
--throttle THROTTLE Time to wait - in seconds - between 2 calls to
the same domain. Defaults to `0.2`.
--timeout TIMEOUT Maximum time - in seconds - to spend for each
request before triggering a timeout. Defaults to
~30s.
--url-template URL_TEMPLATE A template for the urls to fetch. Handy e.g. if
you need to build urls from ids etc.
--wait WAIT Time to wait, in seconds, before taking the
screenshot. This might be a good idea if none of
the --wait-until strategies work for you and if
you need to give more time to the browser
extensions to kick in. This obviously makes the
whole process slower.
--wait-until {commit,domcontentloaded,load,networkidle}
What to wait to consider the web page loaded.
Defaults to `load`.
--width WIDTH Page width in pixels. Defaults to `1920`.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the urls you want to process. Will consider `-`
as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--resume "Whether to resume from an aborted collection.
Need -o to be set.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Columns being added to the output:
. "original_index": index of the line in the original file (the output will be
arbitrarily ordered since multiple requests are performed concurrently).
. "http_status": HTTP status code of the request, e.g. 200, 404, 503 etc.
. "screenshot_error": an error code if anything went wrong when performing the request.
. "path": path to the downloaded file, relative to the folder given
through -O/--output-dir.
--folder-strategy options:
{FolderStrategy.DOCUMENTATION}
Examples:
. Screenshot a batch of url from existing CSV file:
$ minet screenshot url_column -i file.csv > report.csv
. CSV input from stdin (mind the `-`):
$ xan select url_column file.csv | minet screenshot url_column - > report.csv
. Screenshot a single url:
$ minet screenshot https://lemonde.fr
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet fetch "value"
. Here is how to use a command with a CSV file:
$ minet fetch column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet fetch column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet fetch column_name -i file.csv --explode "|"
. This also works with single values:
$ minet fetch "value1,value2" --explode ","
Usage: minet url-extract [-h] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--base-url BASE_URL]
[--from {html,text}] [-s SELECT] [--total TOTAL]
[-o OUTPUT]
column input
# Minet Url Extract Command
Extract urls from a CSV column containing either raw text or raw
HTML.
Positional Arguments:
column Name of the column containing text or html.
input Target CSV file.
Options:
--base-url BASE_URL Base url used to resolve relative urls.
--from {html,text} Extract urls from which kind of source? Defaults
to `text`.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Extracting urls from a text column:
$ minet url-extract text -i posts.csv > urls.csv
. Extracting urls from a html column:
$ minet url-extract html --from html -i posts.csv > urls.csv
Usage: minet url-join [-h] [--silent] [--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-p MATCH_COLUMN_PREFIX]
[--separator SEPARATOR] [-s SELECT] [-o OUTPUT]
column1 input1 column2 input2
# Minet Url Join Command
Join two CSV files by matching them on columns containing urls. It
works by indexing the first file's urls in a specialized
URL trie to match them with the second file's urls.
Positional Arguments:
column1 Name of the column containing urls in the
indexed file.
input1 Path to the file to index. Will understand `-`
as stdin.
column2 Name of the column containing urls in the second
file.
input2 Path to the second file. Will understand `-` as
stdin.
Options:
-p, --match-column-prefix MATCH_COLUMN_PREFIX
Optional prefix to add to the first file's
column names to avoid conflicts. Defaults to ``.
--separator SEPARATOR Split indexed url column by a separator?
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Joining two files:
$ minet url-join url webentities.csv post_url posts.csv > joined.csv
. Adding a prefix to first file's column names:
$ minet url-join -p w_ url webentities.csv post_url posts.csv > joined.csv
. Keeping only some columns from first file:
$ minet url-join url webentities.csv post_url posts.csv -s url,id > joined.csv
. Reading one of the files from stdin:
$ xan select url webentities.csv | minet url-join url - post_url posts.csv > joined.csv
Usage: minet url-parse [-h] [--facebook] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--twitter] [--youtube]
[--infer-redirection] [--fix-common-mistakes]
[--normalize-amp] [--quoted] [--sort-query]
[--strip-authentication] [--strip-fragment]
[--strip-index] [--strip-irrelevant-subdomains]
[--strip-protocol] [--strip-trailing-slash]
[--strip-suffix] [--platform-aware] [-i INPUT]
[--explode EXPLODE] [-s SELECT] [--total TOTAL]
[-o OUTPUT]
url_or_url_column
# Minet Url Parse Command
Parse the urls contained in a CSV file using the python `ural`
library to extract useful information about them such as their
normalized version, domain name, etc.
Positional Arguments:
url_or_url_column Single url to process or name of the CSV column
containing urls when using -i/--input.
Options:
--facebook Whether to consider and parse the given urls as
coming from Facebook.
--fix-common-mistakes, --dont-fix-common-mistakes
Whether or not to attempt to fix common URL
mistakes when normalizing url. Defaults to
`True`.
--infer-redirection, --dont-infer-redirection
Whether or not to attempt resolving common
redirects by leveraging well-known GET
parameters when normalizing url. Defaults to
`True`.
--normalize-amp, --dont-normalize-amp
Whether or not to attempt to normalize Google
AMP urls when normalizing url. Defaults to
`True`.
--platform-aware Whether url parsing should know about some
specific platform such as Facebook, YouTube etc.
into account when normalizing urls. Note that
this is different than activating --facebook or
--youtube.
--quoted Whether to produce quoted canonical and
normalized version.
--sort-query, --dont-sort-query
Whether or not to sort query items when
normalizing url. Defaults to `True`.
--strip-authentication, --dont-strip-authentication
Whether or not to strip authentication when
normalizing url. Defaults to `True`.
--strip-fragment, --dont-strip-fragment, --strip-fragment-except-routing
Whether or not to strip the url's fragment when
normalizing url. If set to
`--strip-fragment-except-routing`, will only
strip the fragment if the fragment is not deemed
to be js routing (i.e. if it contains a `/`).
Defaults to `except-routing`.
--strip-index, --dont-strip-index
Whether or not to strip trailing index when
normalizing url. Defaults to `True`.
--strip-irrelevant-subdomains, --dont-strip-irrelevant-subdomains
Whether or not to strip trailing
irrelevant-subdomains such as `www` etc. when
normalizing url. Defaults to `True`.
--strip-protocol, --dont-strip-protocol
Whether or not to strip the protocol when
normalizing the url. Defaults to `True`.
--strip-suffix Whether to strip the hostname suffix when
fingerprinting the url.
--strip-trailing-slash, --dont-strip-trailing-slash
Whether or not to trailing slash when
normalizing url. Defaults to `True`.
--twitter Whether to consider and parse the given urls as
coming from Twitter.
--youtube Whether to consider and parse the given urls as
coming from YouTube.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the urls you want to process. Will consider `-`
as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Columns being added to the output:
. "canonicalized_url": url cleaned up but technically the same.
. "normalized_url": url aggressively normalized by removing any part
that is not useful to determine which resource it is actually
pointing at.
. "fingerprinted_url": url even more aggressively normalized. Might
not be valid anymore, but useful for statistical aggregation.
. "inferred_redirection": redirection directly inferred from the
url without needing to make any HTTP request.
. "domain_name": public suffix-aware domain name of the url.
. "hostname": full hostname of the url.
. "normalized_hostname": normalized hostname, i.e. stripped of "www",
"m" or some language subdomains etc., of the url.
. "fingerprinted_hostname": hostname even more aggressively normalized.
Might not be valid anymore.
. "probably_shortened": whether the url is probably shortened or
not (bit.ly, t.co etc.).
. "probably_typo": whether the url probably contains typo or not
(such as inclusive language in french : curieux.se etc.).
. "probably_homepage": whether the given url looks like a website's
homepage.
. "should_resolve": whether the given url looks like something
we should resolve, i.e. shortened url or DOI etc.
. "could_be_html": whether the given url could lead to a HTML file.
. "could_be_rss": whether the given url could lead to a RSS file.
columns being added with --facebook:
. "facebook_type": the type of Facebook resource symbolized by the
parsed url (post, video etc.).
. "facebook_id": Facebook resource id.
. "facebook_full_id": Facebook full resource id.
. "facebook_handle": Facebook handle for people, pages etc.
. "facebook_normalized_url": normalized Facebook url.
columns being added with --youtube:
. "youtube_type": YouTube resource type (video, channel etc.).
. "youtube_id": YouTube resource id.
. "youtube_name": YouTube resource name.
columns being added with --twitter:
. "twitter_type": Twitter resource type (user or tweet).
. "twitter_user_screen_name": Twitter user's screen name.
. "tweet_id": id of tweet.
Examples:
. Creating a report about a file's urls:
$ minet url-parse url -i posts.csv > report.csv
. Keeping only selected columns from the input file:
$ minet url-parse url -i posts.csv -s id,url,title > report.csv
. Parsing Facebook urls:
$ minet url-parse url -i fbposts.csv --facebook > report.csv
. Parsing YouTube urls:
$ minet url-parse url -i ytvideos.csv --youtube > report.csv
. Parsing Twitter urls:
$ minet url-parse url -i tweets.csv --twitter > report.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet url-parse "value"
. Here is how to use a command with a CSV file:
$ minet url-parse column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet url-parse column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet url-parse column_name -i file.csv --explode "|"
. This also works with single values:
$ minet url-parse "value1,value2" --explode ","
Usage: minet facebook [-h]
{comments,experimental-comments,post-authors,post-stats,post,posts,url-likes,user-infos}
...
# Minet Facebook Command
Collect data from Facebook.
Options:
-h, --help show this help message and exit
Subcommands:
{comments,experimental-comments,post-authors,post-stats,post,posts,url-likes,user-infos}
Subcommand to use.
Usage: minet facebook comments [-h] [-c COOKIE] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--throttle THROTTLE]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
post_url_or_post_url_column
# Minet Facebook Comments Command
Scrape a Facebook post's comments.
This requires to be logged in to a Facebook account, so
by default this command will attempt to grab the relevant
authentication cookies from a local Firefox browser.
If you want to grab cookies from another browser or want
to directly pass the cookie as a string, check out the
-c/--cookie flag.
Positional Arguments:
post_url_or_post_url_column Single post url to process or name of the CSV
column containing post urls when using
-i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "facebook.cookie" or read
from the MINET_FACEBOOK_COOKIE env variable.
--throttle THROTTLE Throttling time, in seconds, to wait between
each request. Defaults to `2.0`.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the post urls you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Scraping a post's comments:
$ minet fb comments https://www.facebook.com/groups/186982532676569/permalink/4096995827030341/ > comments.csv
. Grabbing cookies from chrome:
$ minet fb comments -c chrome https://www.facebook.com/groups/186982532676569/permalink/4096995827030341/ > comments.csv
. Scraping comments from multiple posts listed in a CSV file:
$ minet fb comments post_url -i posts.csv > comments.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet facebook comments "value"
. Here is how to use a command with a CSV file:
$ minet facebook comments column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet facebook comments column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet facebook comments column_name -i file.csv --explode "|"
. This also works with single values:
$ minet facebook comments "value1,value2" --explode ","
Usage: minet facebook post [-h] [-c COOKIE] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--throttle THROTTLE] [-i INPUT]
[--explode EXPLODE] [-s SELECT] [--total TOTAL]
[-o OUTPUT]
post_url_or_post_url_column
# Minet Facebook Post Command
Scrape Facebook post.
This requires to be logged in to a Facebook account, so
by default this command will attempt to grab the relevant
authentication cookies from a local Firefox browser.
If you want to grab cookies from another browser or want
to directly pass the cookie as a string, check out the
-c/--cookie flag.
You must set your account language to English (US) for the
command to work.
Note that, by default, Facebook will translate post text
when they are not written in a language whitelisted here:
https://www.facebook.com/settings/?tab=language
In this case, minet will output both the original text and
the translated one. But be aware that original text may be
truncated, so you might want to edit your Facebook settings
using the url above to make sure text won't be translated
for posts you are interested in.
Of course, the CLI will warn you when translated text is
found so you can choose to edit your settings early as
as possible.
Finally, some post text is always truncated on Facebook
when displayed in lists. This text is not yet entirely
scraped by minet at this time.
Positional Arguments:
post_url_or_post_url_column Single post url to process or name of the CSV
column containing post urls when using
-i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "facebook.cookie" or read
from the MINET_FACEBOOK_COOKIE env variable.
--throttle THROTTLE Throttling time, in seconds, to wait between
each request. Defaults to `2.0`.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the post urls you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Scraping a post:
$ minet fb post https://m.facebook.com/watch/?v=448540820705115 > post.csv
. Grabbing cookies from chrome:
$ minet fb posts -c chrome https://m.facebook.com/watch/?v=448540820705115 > post.csv
. Scraping post from multiple urls listed in a CSV file:
$ minet fb post url -i urls.csv > post.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet facebook post "value"
. Here is how to use a command with a CSV file:
$ minet facebook post column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet facebook post column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet facebook post column_name -i file.csv --explode "|"
. This also works with single values:
$ minet facebook post "value1,value2" --explode ","
Usage: minet facebook posts [-h] [-c COOKIE] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--throttle THROTTLE] [-i INPUT]
[--explode EXPLODE] [-s SELECT] [--total TOTAL]
[-o OUTPUT]
group_url_or_group_url_column
# Minet Facebook Posts Command
Scrape Facebook posts.
This requires to be logged in to a Facebook account, so
by default this command will attempt to grab the relevant
authentication cookies from a local Firefox browser.
If you want to grab cookies from another browser or want
to directly pass the cookie as a string, check out the
-c/--cookie flag.
Scraping posts currently only works for Facebook groups.
Note that, by default, Facebook will translate post text
when they are not written in a language whitelisted here:
https://www.facebook.com/settings/?tab=language
In this case, minet will output both the original text and
the translated one. But be aware that original text may be
truncated, so you might want to edit your Facebook settings
using the url above to make sure text won't be translated
for posts you are interested in.
Of course, the CLI will warn you when translated text is
found so you can choose to edit your settings early as
as possible.
Finally, some post text is always truncated on Facebook
when displayed in lists. This text is not yet entirely
scraped by minet at this time.
Positional Arguments:
group_url_or_group_url_column
Single group url to process or name of the CSV
column containing group urls when using
-i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "facebook.cookie" or read
from the MINET_FACEBOOK_COOKIE env variable.
--throttle THROTTLE Throttling time, in seconds, to wait between
each request. Defaults to `2.0`.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the group urls you want to process. Will
consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Scraping a group's posts:
$ minet fb posts https://www.facebook.com/groups/444175323127747 > posts.csv
. Grabbing cookies from chrome:
$ minet fb posts -c chrome https://www.facebook.com/groups/444175323127747 > posts.csv
. Scraping posts from multiple groups listed in a CSV file:
$ minet fb posts group_url -i groups.csv > posts.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet facebook posts "value"
. Here is how to use a command with a CSV file:
$ minet facebook posts column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet facebook posts column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet facebook posts column_name -i file.csv --explode "|"
. This also works with single values:
$ minet facebook posts "value1,value2" --explode ","
Usage: minet facebook post-authors [-h] [-c COOKIE] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--throttle THROTTLE]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
post_url_or_post_url_column
# Minet Facebook Post Authors Command
Retrieve the author of the given Facebook posts.
Note that it is only relevant for group posts since
only administrators can post something on pages.
Positional Arguments:
post_url_or_post_url_column Single post to process or name of the CSV column
containing posts when using -i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "facebook.cookie" or read
from the MINET_FACEBOOK_COOKIE env variable.
--throttle THROTTLE Throttling time, in seconds, to wait between
each request. Defaults to `2.0`.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the posts you want to process. Will consider `-`
as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Fetching authors of a series of posts in a CSV file:
$ minet fb post-authors post_url -i fb-posts.csv > authors.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet facebook post-authors "value"
. Here is how to use a command with a CSV file:
$ minet facebook post-authors column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet facebook post-authors column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet facebook post-authors column_name -i file.csv --explode "|"
. This also works with single values:
$ minet facebook post-authors "value1,value2" --explode ","
Usage: minet facebook url-likes [-h] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-i INPUT]
[--explode EXPLODE] [-s SELECT] [--total TOTAL]
[-o OUTPUT]
url_or_url_column
# Minet Facebook Url Likes Command
Retrieve the approximate number of "likes" (actually an aggregated engagement metric)
that a url got on Facebook. The command can also be used with a list of urls stored in a CSV file.
This number is found by scraping Facebook's share button, which only gives a
rough estimation of the real engagement metric: "Share 45K" for example.
Note that this number does not actually only correspond to the number of
likes or shares, but it is rather the sum of like, love, ahah, angry, etc.
reactions plus the number of comments and shares that the URL got on Facebook
(here is the official documentation: https://developers.facebook.com/docs/plugins/faqs
explaining "What makes up the number shown next to my Share button?").
Positional Arguments:
url_or_url_column Single url to process or name of the CSV column
containing urls when using -i/--input.
Options:
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the urls you want to process. Will consider `-`
as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
example:
. Retrieving the "like" number for one url:
$ minet fb url-likes "www.example-url.com" > url_like.csv
. Retrieving the "like" number for the urls listed in a CSV file:
$ minet fb url-likes url -i url.csv > url_likes.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet facebook url-likes "value"
. Here is how to use a command with a CSV file:
$ minet facebook url-likes column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet facebook url-likes column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet facebook url-likes column_name -i file.csv --explode "|"
. This also works with single values:
$ minet facebook url-likes "value1,value2" --explode ","
Usage: minet facebook user-infos [-h] [-c COOKIE] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--throttle THROTTLE]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [--resume] [-o OUTPUT]
user_url_or_user_url_column
# Minet Facebook User Infos Command
Retrieve various information about Facebook users like their name, hometown,
current city, gender etc.
Positional Arguments:
user_url_or_user_url_column Single user to process or name of the CSV column
containing users when using -i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "facebook.cookie" or read
from the MINET_FACEBOOK_COOKIE env variable.
--throttle THROTTLE Throttling time, in seconds, to wait between
each request. Defaults to `2.0`.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the users you want to process. Will consider `-`
as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--resume "Whether to resume from an aborted collection.
Need -o to be set.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Fetching user infos of a series of users in a CSV file:
$ minet fb user-infos user_url -i fb-users.csv > user-infos.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet facebook user-infos "value"
. Here is how to use a command with a CSV file:
$ minet facebook user-infos column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet facebook user-infos column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet facebook user-infos column_name -i file.csv --explode "|"
. This also works with single values:
$ minet facebook user-infos "value1,value2" --explode ","
Usage: minet google [-h] {sheets} ...
# Minet Google Command
Collect data from Google.
Options:
-h, --help show this help message and exit
Subcommands:
{sheets} Subcommand to use.
Usage: minet google sheets [-h] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-a AUTHUSER] [-c COOKIE]
[-o OUTPUT]
url
# Minet Google Sheets Command
Grab the given google spreadsheet as a CSV file from
its url, its sharing url or id.
It can access public spreadsheets without issues, but to
you will need to tell the command how to retrieve Google
drive authentication cookies to also be able to access
private ones.
Also note that by default, the command will try to access
your spreadsheet using your first 4 connected Google
accounts.
If you have more connected accounts or know beforehand
to which account some spreadsheets are tied to, be sure
to give --authuser.
Positional Arguments:
url Url, sharing url or id of the spreadsheet to
export.
Options:
-a, --authuser AUTHUSER Connected google account number to use.
-c, --cookie COOKIE Google Drive cookie or browser from which to
extract it (supports "firefox", "chrome",
"chromium", "opera" and "edge").
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Exporting from the spreadsheet id:
$ minet google sheets 1QXQ1yaNYrVUlMt6LQ4jrLGt_PvZI9goozYiBTgaC4RI > file.csv
. Using your Firefox authentication cookies:
$ minet google sheets --cookie firefox 1QXQ1yaNYrVUlMt6LQ4jrLGt_PvZI9goozYiBTgaC4RI > file.csv
Usage: minet hyphe crawl [-h] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--id-column ID_COLUMN]
[--status-column STATUS_COLUMN]
[--prefixes-column PREFIXES_COLUMN]
[--prefix-separator PREFIX_SEPARATOR]
[--start-pages-column START_PAGES_COLUMN]
[--start-page-separator START_PAGE_SEPARATOR]
[--ignore-internal-links] [-O OUTPUT_DIR] [--resume]
[--max-depth MAX_DEPTH] [--throttle THROTTLE]
[--domain-parallelism DOMAIN_PARALLELISM] [-t THREADS]
[-z] [--compress-transfer] [-w] [-d]
[--folder-strategy FOLDER_STRATEGY]
[-f {csv,jsonl,ndjson}] [-v] [-n] [-k] [-p PROCESSES]
[--connect-timeout CONNECT_TIMEOUT] [--timeout TIMEOUT]
[--retries RETRIES] [--pycurl] [--sqlar]
corpus
# Minet Hyphe Crawl Command
Specialized crawl command that can be used to reproduce
a Hyphe crawl from a corpus exported in CSV.
Positional Arguments:
corpus Path to the Hyphe corpus exported to CSV.
Options:
-z, --compress-on-disk Whether to compress the downloaded files when
saving files on disk.
--compress-transfer Whether to send a "Accept-Encoding" header
asking for a compressed response. Usually better
for bandwidth but at the cost of more CPU work.
--connect-timeout CONNECT_TIMEOUT
Maximum socket connection time to host. Defaults
to `15`.
--domain-parallelism DOMAIN_PARALLELISM
Max number of urls per domain to hit at the same
time. Defaults to `1`.
--folder-strategy FOLDER_STRATEGY
Name of the strategy to be used to dispatch the
retrieved files into folders to alleviate issues
on some filesystems when a folder contains too
much files. Note that this will be applied on
top of --filename-template. All of the
strategies are described at the end of this
help. Defaults to `fullpath`.
-f, --format {csv,jsonl,ndjson}
Serialization format for scraped/extracted data.
Defaults to `csv`.
--id-column ID_COLUMN Name of the CSV column containing the webentity
ids. Defaults to `ID`.
--ignore-internal-links Whether not to write links internal to a
webentity on disk.
-k, --insecure Whether to allow ssl errors when performing
requests or not.
--max-depth MAX_DEPTH Maximum depth for the crawl.
-n, --normalized-url-cache Whether to normalize url cache used to assess if
some url was already visited.
-O, --output-dir OUTPUT_DIR Output directory. Defaults to `crawl`.
--prefix-separator PREFIX_SEPARATOR
Separator character for the webentity prefixes.
Defaults to ` `.
--prefixes-column PREFIXES_COLUMN
Name of the CSV column containing the webentity
prefixes, separated by --prefix-separator.
Defaults to `PREFIXES AS URL`.
-p, --processes PROCESSES Number of processes for the crawler process
pool.
--pycurl Whether to use the pycurl library to perform the
calls.
--retries RETRIES Number of times to retry on timeout & common
network-related issues. Defaults to `3`.
--sqlar Whether to write files into a single-file sqlite
archive rather than as individual files on the
disk.
--start-page-separator START_PAGE_SEPARATOR
Separator character for the webentity start
pages. Defaults to ` `.
--start-pages-column START_PAGES_COLUMN
Name of the CSV column containing the webentity
start pages, separated by
--start-page-separator. Defaults to `START
PAGES`.
--status-column STATUS_COLUMN
Name of the CSV column containing the webentity
statuses. Defaults to `STATUS`.
-t, --threads THREADS Number of threads to use. Will default to a
conservative number, based on the number of
available cores. Feel free to increase.
--throttle THROTTLE Time to wait - in seconds - between 2 calls to
the same domain. Defaults to `0`.
--timeout TIMEOUT Maximum time - in seconds - to spend for each
request before triggering a timeout. Defaults to
`60`.
-v, --verbose Whether to print information about crawl
results.
-d, --write-data, -D, --dont-write-data
Whether to write scraped/extracted data on disk.
Defaults to `True`.
-w, --write-files Whether to write downloaded files on disk in
order to save them for later.
--resume Whether to resume an interrupted crawl.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
--folder-strategy options:
. "flat": default choice, all files will be written in the indicated
content folder.
. "fullpath": all files will be written in a folder consisting of the
url hostname and then its path.
. "prefix-x": e.g. "prefix-4", files will be written in folders
having a name that is the first x characters of the file's name.
This is an efficient way to partition content into folders containing
roughly the same number of files if the file names are random (which
is the case by default since md5 hashes will be used).
. "hostname": files will be written in folders based on their url's
full host name.
. "normalized-hostname": files will be written in folders based on
their url's hostname stripped of some undesirable parts (such as
"www.", or "m.", for instance).
. "fingerprinted-hostname": files will be written in folders based on
their url's hostname stripped of some more undesirable parts (such as
"fr.", for instance) and their public suffix will be dropped.
Examples:
. Reproducing a crawl:
$ minet hyphe crawl corpus.csv
Notes regarding sqlite storage temporary files:
If you spawn a persistent crawler, some of its state will be kept using
specialized sqlite databases on disk.
Be aware that sqlite sometimes need to perform cleanup operations that rely
on temporary files that will be written in a folder configured as the
`SQLITE_TMPDIR` env variable. Be sure to set this variable when running this
command, especially when the crawler files will be stored on a different disk
and if writing in the host's `/tmp` directory can be risky due to insufficient
storage available.
For more info, check out: https://www.sqlite.org/tempfiles.html
Usage: minet hyphe declare [-h] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--password PASSWORD]
[--total TOTAL] [-o OUTPUT]
url corpus webentities
# Minet Hyphe Declare Command
Command that can be used to declare series of webentities
in a corpus.
It is ideal to start or restart a corpus using the same exact
webentity declarations as another one.
Positional Arguments:
url Url of the Hyphe API.
corpus Id of the corpus.
webentities CSV file of webentities (exported from Hyphe).
Options:
--password PASSWORD The corpus's password if required.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Declaring webentities from a Hyphe export:
$ minet hyphe declare http://myhyphe.com/api/ target-corpus export.csv
Usage: minet hyphe destroy [-h] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--password PASSWORD] [-o OUTPUT]
url corpus
# Minet Hyphe Destroy Command
Command that can be used to destroy a corpus entirely.
Positional Arguments:
url Url of the Hyphe API.
corpus Id of the corpus.
Options:
--password PASSWORD The corpus's password if required.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Destroying a corpus:
$ minet hyphe destroy http://myhyphe.com/api/ my-corpus
Usage: minet hyphe dump [-h] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-O OUTPUT_DIR] [--body]
[--statuses STATUSES] [--page-count PAGE_COUNT]
[--password PASSWORD] [-o OUTPUT]
url corpus
# Minet Hyphe Dump Command
Command dumping page-level information from a given
Hyphe corpus.
Positional Arguments:
url Url of the Hyphe API.
corpus Id of the corpus.
Options:
--body Whether to download pages body.
-O, --output-dir OUTPUT_DIR Output directory for dumped files. Will default
to some name based on corpus name.
--page-count PAGE_COUNT Number of pages to download per pagination call.
Tweak if corpus has large pages or if the
network is unreliable. Defaults to `500`.
--password PASSWORD The corpus's password if required.
--statuses STATUSES Webentity statuses to dump, separated by comma.
Possible statuses being "IN", "OUT", "UNDECIDED"
and "DISCOVERED".
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Dumping a corpus into the ./corpus directory:
$ minet hyphe dump http://myhyphe.com/api/ corpus-name -O corpus
Usage: minet hyphe reset [-h] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--password PASSWORD] [-o OUTPUT]
url corpus
# Minet Hyphe Reset Command
Command that can be used to reset a corpus entirely.
Positional Arguments:
url Url of the Hyphe API.
corpus Id of the corpus.
Options:
--password PASSWORD The corpus's password if required.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Resetting a corpus:
$ minet hyphe reset http://myhyphe.com/api/ my-corpus
Usage: minet hyphe tag [-h] [--silent] [--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--separator SEPARATOR]
[--password PASSWORD] [--total TOTAL] [-o OUTPUT]
url corpus webentity_id_column tag_columns data
# Minet Hyphe Tag Command
Command that can be used to tag webentities in batch using
metadata recorded in a CSV file.
Positional Arguments:
url Url of the Hyphe API.
corpus Id of the corpus.
webentity_id_column Column of the CSV file containing the webentity
ids.
tag_columns Columns, separated by comma, to use as tags.
data CSV file of webentities (exported from Hyphe).
Options:
--password PASSWORD The corpus's password if required.
--separator SEPARATOR Separator use to split multiple tag values in
the same column. Defaults to `|`.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Tag webentities from two columns of CSV file:
$ minet hyphe tag http://myhyphe.com/api/ my-corpus webentity_id type,creator metadata.csv
Usage: minet instagram [-h] [-c COOKIE] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress]
{comments,hashtag,location,post-infos,user-followers,user-following,user-infos,user-posts}
...
# Minet Instagram Command
Gather data from Instagram.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "instagram.cookie" or read
from the MINET_INSTAGRAM_COOKIE env variable.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Subcommands:
{comments,hashtag,location,post-infos,user-followers,user-following,user-infos,user-posts}
Subcommand to use.
Usage: minet instagram comments [-h] [-c COOKIE] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-l LIMIT] [-i INPUT]
[--explode EXPLODE] [-s SELECT] [--total TOTAL]
[-o OUTPUT]
post_or_post_column
# Instagram Comments Command
Scrape Instagram comments with a given post url, post shortcode or post id.
This requires to be logged in to an Instagram account, so
by default this command will attempt to grab the relevant
authentication cookies from a local Firefox browser.
If you want to grab cookies from another browser or want
to directly pass the cookie as a string, check out the
-c/--cookie flag.
Positional Arguments:
post_or_post_column Single post url, post shortcode or post id to
process or name of the CSV column containing
post urls, post shortcodes or post ids when
using -i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "instagram.cookie" or read
from the MINET_INSTAGRAM_COOKIE env variable.
-l, --limit LIMIT Maximum number of comments to retrieve per post.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the post urls, post shortcodes or post ids you
want to process. Will consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Example:
. Searching comments from the post https://www.instagram.com/p/CpA46rmU26Y/:
$ minet instagram comments https://www.instagram.com/p/CpA46rmU26Y/ > comments.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet instagram comments "value"
. Here is how to use a command with a CSV file:
$ minet instagram comments column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet instagram comments column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet instagram comments column_name -i file.csv --explode "|"
. This also works with single values:
$ minet instagram comments "value1,value2" --explode ","
Usage: minet instagram hashtag [-h] [-c COOKIE] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-l LIMIT] [-i INPUT]
[--explode EXPLODE] [-s SELECT] [--total TOTAL]
[-o OUTPUT]
hashtag_or_hashtag_column
# Instagram hashtag
Scrape Instagram posts with a given hashtag.
This requires to be logged in to an Instagram account, so
by default this command will attempt to grab the relevant
authentication cookies from a local Firefox browser.
If you want to grab cookies from another browser or want
to directly pass the cookie as a string, check out the
-c/--cookie flag.
display_url is not the media url, but a thumbnail of the post.
There is no way with this command to get the media urls.
Positional Arguments:
hashtag_or_hashtag_column Single hashtag to process or name of the CSV
column containing hashtags when using
-i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "instagram.cookie" or read
from the MINET_INSTAGRAM_COOKIE env variable.
-l, --limit LIMIT Maximum number of posts to retrieve per hashtag.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the hashtags you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Example:
. Searching posts with the hashtag paris:
$ minet instagram hashtag paris > paris_posts.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet instagram hashtag "value"
. Here is how to use a command with a CSV file:
$ minet instagram hashtag column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet instagram hashtag column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet instagram hashtag column_name -i file.csv --explode "|"
. This also works with single values:
$ minet instagram hashtag "value1,value2" --explode ","
Usage: minet instagram location [-h] [-c COOKIE] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-l LIMIT] [-i INPUT]
[--explode EXPLODE] [-s SELECT] [--total TOTAL]
[-o OUTPUT]
location_or_location_column
# Instagram location
Scrape Instagram posts with a given location id.
This requires to be logged in to an Instagram account, so
by default this command will attempt to grab the relevant
authentication cookies from a local Firefox browser.
If you want to grab cookies from another browser or want
to directly pass the cookie as a string, check out the
-c/--cookie flag.
display_url is not the media url, but a thumbnail of the post.
There is no way with this command to get the media urls.
Positional Arguments:
location_or_location_column Single location to process or name of the CSV
column containing locations when using
-i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "instagram.cookie" or read
from the MINET_INSTAGRAM_COOKIE env variable.
-l, --limit LIMIT Maximum number of posts to retrieve per
location.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the locations you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Example:
. Searching posts with the location id for Milan, Italy:
$ minet instagram location 213050058 > 213050058_posts.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet instagram location "value"
. Here is how to use a command with a CSV file:
$ minet instagram location column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet instagram location column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet instagram location column_name -i file.csv --explode "|"
. This also works with single values:
$ minet instagram location "value1,value2" --explode ","
Usage: minet instagram post-infos [-h] [-c COOKIE] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-i INPUT]
[--explode EXPLODE] [-s SELECT]
[--total TOTAL] [--resume] [-o OUTPUT]
post_or_post_column
# Instagram post-infos
Scrape Instagram infos with a given post url, post shortcode or post id.
This requires to be logged in to an Instagram account, so
by default this command will attempt to grab the relevant
authentication cookies from a local Firefox browser.
If you want to grab cookies from another browser or want
to directly pass the cookie as a string, check out the
-c/--cookie flag.
Beware, instagram only provides temporary links, not permalinks,
for profile picture urls retrieved as the "profile_pic_url_hd" in
the result. Be sure to download them fast if you need them (you can
use the `minet fetch` command for that, and won't need to use cookies).
Positional Arguments:
post_or_post_column Single post url, post shortcode or post id to
process or name of the CSV column containing
post urls, post shortcodes or post ids when
using -i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "instagram.cookie" or read
from the MINET_INSTAGRAM_COOKIE env variable.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the post urls, post shortcodes or post ids you
want to process. Will consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--resume "Whether to resume from an aborted collection.
Need -o to be set.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Example:
. Searching infos for the post https://www.instagram.com/p/CpA46rmU26Y/:
$ minet instagram post-infos https://www.instagram.com/p/CpA46rmU26Y/ > post_infos.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet instagram post-infos "value"
. Here is how to use a command with a CSV file:
$ minet instagram post-infos column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet instagram post-infos column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet instagram post-infos column_name -i file.csv --explode "|"
. This also works with single values:
$ minet instagram post-infos "value1,value2" --explode ","
Usage: minet instagram user-followers [-h] [-c COOKIE] [--rcfile RCFILE]
[--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-l LIMIT] [-i INPUT]
[--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
user_or_user_column
# Instagram User Followers Command
Scrape Instagram followers with a given username, user url or user id.
On verified accounts, you may be unable to get all of them.
This requires to be logged in to an Instagram account, so
by default this command will attempt to grab the relevant
authentication cookies from a local Firefox browser.
If you want to grab cookies from another browser or want
to directly pass the cookie as a string, check out the
-c/--cookie flag.
Beware, instagram only provides temporary links, not permalinks,
for profile picture urls retrieved as the "profile_pic_url" in
the result. Be sure to download them fast if you need them (you can
use the `minet fetch` command for that, and won't need to use cookies).
If a username is a number without '@' at the beginning, it will be
considered as an id.
Positional Arguments:
user_or_user_column Single username, user url or user id to process
or name of the CSV column containing usernames,
user urls or user ids when using -i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "instagram.cookie" or read
from the MINET_INSTAGRAM_COOKIE env variable.
-l, --limit LIMIT Maximum number of followers to retrieve per
user.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the usernames, user urls or user ids you want to
process. Will consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Example:
. Searching followers with the username banksrepeta:
$ minet instagram user-followers banksrepeta > banksrepeta_followers.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet instagram user-followers "value"
. Here is how to use a command with a CSV file:
$ minet instagram user-followers column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet instagram user-followers column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet instagram user-followers column_name -i file.csv --explode "|"
. This also works with single values:
$ minet instagram user-followers "value1,value2" --explode ","
Usage: minet instagram user-following [-h] [-c COOKIE] [--rcfile RCFILE]
[--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-l LIMIT] [-i INPUT]
[--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
user_or_user_column
# Instagram User Following Command
Scrape Instagram accounts followed with a given username, user url or user id.
This requires to be logged in to an Instagram account, so
by default this command will attempt to grab the relevant
authentication cookies from a local Firefox browser.
If you want to grab cookies from another browser or want
to directly pass the cookie as a string, check out the
-c/--cookie flag.
Beware, instagram only provides temporary links, not permalinks,
for profile picture urls retrieved as the "profile_pic_url" in
the result. Be sure to download them fast if you need them (you can
use the `minet fetch` command for that, and won't need to use cookies).
If a username is a number without '@' at the beginning, it will be
considered as an id.
Positional Arguments:
user_or_user_column Single username, user url or user id to process
or name of the CSV column containing usernames,
user urls or user ids when using -i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "instagram.cookie" or read
from the MINET_INSTAGRAM_COOKIE env variable.
-l, --limit LIMIT Maximum number of accounts to retrieve per user.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the usernames, user urls or user ids you want to
process. Will consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Example:
. Searching accounts followed with the username paramountplus:
$ minet instagram user-following paramountplus > paramountplus_following.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet instagram user-following "value"
. Here is how to use a command with a CSV file:
$ minet instagram user-following column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet instagram user-following column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet instagram user-following column_name -i file.csv --explode "|"
. This also works with single values:
$ minet instagram user-following "value1,value2" --explode ","
Usage: minet instagram user-infos [-h] [-c COOKIE] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-i INPUT]
[--explode EXPLODE] [-s SELECT]
[--total TOTAL] [--resume] [-o OUTPUT]
user_or_user_column
# Instagram user-infos
Scrape Instagram infos with a given username, user url or user id.
This requires to be logged in to an Instagram account, so
by default this command will attempt to grab the relevant
authentication cookies from a local Firefox browser.
If you want to grab cookies from another browser or want
to directly pass the cookie as a string, check out the
-c/--cookie flag.
Beware, instagram only provides temporary links, not permalinks,
for profile picture urls retrieved as the "profile_pic_url_hd" in
the result. Be sure to download them fast if you need them (you can
use the `minet fetch` command for that, and won't need to use cookies).
If a username is a number without '@' at the beginning, it will be
considered as an id.
Positional Arguments:
user_or_user_column Single username, user url or user id to process
or name of the CSV column containing usernames,
user urls or user ids when using -i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "instagram.cookie" or read
from the MINET_INSTAGRAM_COOKIE env variable.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the usernames, user urls or user ids you want to
process. Will consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--resume "Whether to resume from an aborted collection.
Need -o to be set.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Example:
. Searching infos with the username banksrepeta:
$ minet instagram user-infos banksrepeta > banksrepeta_infos.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet instagram user-infos "value"
. Here is how to use a command with a CSV file:
$ minet instagram user-infos column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet instagram user-infos column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet instagram user-infos column_name -i file.csv --explode "|"
. This also works with single values:
$ minet instagram user-infos "value1,value2" --explode ","
Usage: minet instagram user-posts [-h] [-c COOKIE] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-l LIMIT] [-i INPUT]
[--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
user_or_user_column
# Instagram User Posts Command
Scrape Instagram posts with a given username, user url or user id.
This requires to be logged in to an Instagram account, so
by default this command will attempt to grab the relevant
authentication cookies from a local Firefox browser.
If you want to grab cookies from another browser or want
to directly pass the cookie as a string, check out the
-c/--cookie flag.
The urls in the medias_url column have a limited life time.
It is not the case for the url in main_thumbnail_url, which
corresponds to the first image (the video cover if the first
media is a video). Be sure to download them fast if you need
them (you can use the `minet fetch` command for that, and
won't need to use cookies).
If a username is a number without '@' at the beginning, it will be
considered as an id.
Positional Arguments:
user_or_user_column Single username, user url or user id to process
or name of the CSV column containing usernames,
user urls or user ids when using -i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "instagram.cookie" or read
from the MINET_INSTAGRAM_COOKIE env variable.
-l, --limit LIMIT Maximum number of posts to retrieve per user.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the usernames, user urls or user ids you want to
process. Will consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Example:
. Searching posts from the account paramountplus:
$ minet instagram user-posts paramountplus > paramountplus_posts.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet instagram user-posts "value"
. Here is how to use a command with a CSV file:
$ minet instagram user-posts column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet instagram user-posts column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet instagram user-posts column_name -i file.csv --explode "|"
. This also works with single values:
$ minet instagram user-posts "value1,value2" --explode ","
Usage: minet mediacloud medias [-h] [-t TOKEN] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--feeds FEEDS] [-i INPUT]
[--explode EXPLODE] [-s SELECT] [--total TOTAL]
[-o OUTPUT]
media_or_media_column
# Minet Mediacloud Medias Command
Retrieve metadata about a list of Mediacloud medias.
Positional Arguments:
media_or_media_column Single Mediacloud media id to process or name of
the CSV column containing Mediacloud media ids
when using -i/--input.
Options:
--feeds FEEDS If given, path of the CSV file listing media RSS
feeds.
-t, --token TOKEN Mediacloud API token (also called "key"
sometimes). Can also be configured in a .minetrc
file as "mediacloud.token" or read from the
MINET_MEDIACLOUD_TOKEN env variable.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the Mediacloud media ids you want to process.
Will consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet mediacloud medias "value"
. Here is how to use a command with a CSV file:
$ minet mediacloud medias column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet mediacloud medias column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet mediacloud medias column_name -i file.csv --explode "|"
. This also works with single values:
$ minet mediacloud medias "value1,value2" --explode ","
Usage: minet mediacloud search [-h] [-t TOKEN] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-c COLLECTIONS]
[--filter-query FILTER_QUERY] [-m MEDIAS]
[--publish-day PUBLISH_DAY]
[--publish-month PUBLISH_MONTH]
[--publish-year PUBLISH_YEAR] [--skip-count]
[-o OUTPUT]
query
# Minet Mediacloud Search Command
Search stories on the Mediacloud platform.
To learn how to compose more relevant queries, check out this guide:
https://mediacloud.org/support/query-guide
Positional Arguments:
query Search query.
Options:
-c, --collections COLLECTIONS
List of collection ids to search, separated by
commas.
--filter-query FILTER_QUERY Solr filter query `fq` to use. Can be used to
optimize some parts of the query.
-m, --medias MEDIAS List of media ids to search, separated by
commas.
--publish-day PUBLISH_DAY Only search stories published on provided day
(iso format, e.g. "2018-03-24").
--publish-month PUBLISH_MONTH
Only search stories published on provided month
(iso format, e.g. "2018-03").
--publish-year PUBLISH_YEAR Only search stories published on provided year
(iso format, e.g. "2018").
--skip-count Whether to skip the first API call counting the
number of posts for the progress bar.
-t, --token TOKEN Mediacloud API token (also called "key"
sometimes). Can also be configured in a .minetrc
file as "mediacloud.token" or read from the
MINET_MEDIACLOUD_TOKEN env variable.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Usage: minet mediacloud topic stories [-h] [-t TOKEN] [--rcfile RCFILE]
[--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--media-id MEDIA_ID]
[--from-media-id FROM_MEDIA_ID]
[-o OUTPUT]
topic_id
# Minet Mediacloud Topic Stories Command
Retrieves the list of stories from a mediacloud topic.
Positional Arguments:
topic_id Id of the topic.
Options:
--from-media-id FROM_MEDIA_ID
Return only stories that are linked from stories
in the given media_id.
--media-id MEDIA_ID Return only stories belonging to the given
media_ids.
-t, --token TOKEN Mediacloud API token (also called "key"
sometimes). Can also be configured in a .minetrc
file as "mediacloud.token" or read from the
MINET_MEDIACLOUD_TOKEN env variable.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Usage: minet telegram channel-infos [-h] [--throttle THROTTLE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-i INPUT]
[--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
channel_name_or_channel_name_column
# Minet Telegram Channel-Infos Command
Scrape a Telegram channel's infos.
Positional Arguments:
channel_name_or_channel_name_column
Single channel name / url to process or name of
the CSV column containing channel names / urls
when using -i/--input.
Options:
--throttle THROTTLE Throttling time, in seconds, to wait between
each request. Defaults to `0.5`.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the channel names / urls you want to process.
Will consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Scraping a channel's infos:
$ minet telegram channel-infos nytimes > infos.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet telegram channel-infos "value"
. Here is how to use a command with a CSV file:
$ minet telegram channel-infos column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet telegram channel-infos column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet telegram channel-infos column_name -i file.csv --explode "|"
. This also works with single values:
$ minet telegram channel-infos "value1,value2" --explode ","
Usage: minet telegram channel-messages [-h] [--throttle THROTTLE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-i INPUT]
[--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
channel_name_or_channel_name_column
# Minet Telegram Channel-Messages Command
Scrape Telegram channel messages.
Positional Arguments:
channel_name_or_channel_name_column
Single channel name / url to process or name of
the CSV column containing channel names / urls
when using -i/--input.
Options:
--throttle THROTTLE Throttling time, in seconds, to wait between
each request. Defaults to `0.5`.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the channel names / urls you want to process.
Will consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Scraping a group's posts:
$ minet telegram channel-messages nytimes > messages.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet telegram channel-messages "value"
. Here is how to use a command with a CSV file:
$ minet telegram channel-messages column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet telegram channel-messages column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet telegram channel-messages column_name -i file.csv --explode "|"
. This also works with single values:
$ minet telegram channel-messages "value1,value2" --explode ","
Usage: minet tiktok [-h] {search-videos} ...
# Minet Tiktok Command
Gather data from Tiktok.
Options:
-h, --help show this help message and exit
Subcommands:
{search-videos} Subcommand to use.
Usage: minet tiktok search-videos [-h] [-c COOKIE] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-l LIMIT] [-i INPUT]
[--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
query_or_query_column
# Tiktok Search Videos Command
Scrape Tiktok videos with given keyword(s).
This requires to be logged in to an Tiktok account, so
by default this command will attempt to grab the relevant
authentication cookies from a local Firefox browser.
If you want to grab cookies from another browser or want
to directly pass the cookie as a string, check out the
-c/--cookie flag.
Challenges are hashtags, that can be associated with a description.
The url have a limited life time (indicated by a timestamp in the
url). If you want to get the resources associated to it, you should
use the `minet fetch` command.
This command allows you to get about 450 results, ordered by user
relevance (a mix of most popular, and most relevant according to your
profile).
Positional Arguments:
query_or_query_column Single tiktok keyword to process or name of the
CSV column containing tiktok keywords when using
-i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "tiktok.cookie" or read from
the MINET_TIKTOK_COOKIE env variable.
-l, --limit LIMIT Maximum number of videos to retrieve per query.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the tiktok keywords you want to process. Will
consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Example:
. Searching videos with the keyword paris:
$ minet tiktok search-videos paris > paris_videos.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet tiktok search-videos "value"
. Here is how to use a command with a CSV file:
$ minet tiktok search-videos column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet tiktok search-videos column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet tiktok search-videos column_name -i file.csv --explode "|"
. This also works with single values:
$ minet tiktok search-videos "value1,value2" --explode ","
Usage: minet twitter attrition [-h] [--user USER] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--retweeted-id RETWEETED_ID]
[--ids] [--api-key API_KEY] [--rcfile RCFILE]
[--api-secret-key API_SECRET_KEY]
[--access-token ACCESS_TOKEN]
[--access-token-secret ACCESS_TOKEN_SECRET]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [--resume] [-o OUTPUT]
tweet_url_or_id_or_tweet_url_or_id_column
# Minet Twitter Attrition Command
Using Twitter API to find whether batches of tweets are still
available today and if they aren't, attempt to find a reason why.
This command relies on tweet ids or tweet urls. We recommend to add `--user` and
the tweet's user id to the command if you can, as more information can
be obtained when the user id (or the full url) is known.
The same can be said about retweet information and the `--retweeted-id` flag.
The command will output a report similar to the input file and
containing an additional column named "current_tweet_status" that can take
the following values:
- "available_tweet": tweet is still available.
- "user_or_tweet_deleted": tweet was deleted or its author was deactivated. To know whether it is one or the other reason
for unavailability that is the right one, add --user to the command.
- "suspended_user": tweet cannot be found because its user is suspended.
- "deactivated_user": tweet cannot be found because its user is deactivated.
- "deactivated_or_renamed_user": tweet cannot be found because its user is either deactivated or changed its screen name
(only when using tweet urls or tweet ids and screen names instead of user ids).
- "protected_user": tweet cannot be found because its user is protected.
- "censored_tweet": tweet is unavailable because it was consored by Twitter.
- "blocked_by_tweet_author": tweet cannot be found because you were blocked by its author.
- "unavailable_tweet": tweet is not available, which means it was
deleted by its user.
- "unavailable_retweet": retweet is not available, meaning that the user
cancelled their retweet.
- "unavailable_retweeted_tweet": the retweeted tweet is unavailable,
meaning it was either deleted by its original
user or the original user was deactivated.
- "censored_retweeted_tweet": the original tweet was censored by Twitter, making the retweet unavailable.
- "protected_retweeted_user": tweet cannot be found because it is a retweet of a protected user.
- "suspended_retweeted_user": tweet cannot be found because it is a retweet of a suspended user.
- "blocked_by_original_tweet_author": tweet cannot be found because it is a retweet of a user who blocked you.
Positional Arguments:
tweet_url_or_id_or_tweet_url_or_id_column
Single tweet url or id to process or name of the
CSV column containing tweet urls or ids when
using -i/--input.
Options:
--access-token ACCESS_TOKEN Twitter API access token. Can also be configured
in a .minetrc file as "twitter.access_token" or
read from the MINET_TWITTER_ACCESS_TOKEN env
variable.
--access-token-secret ACCESS_TOKEN_SECRET
Twitter API access token secret. Can also be
configured in a .minetrc file as
"twitter.access_token_secret" or read from the
MINET_TWITTER_ACCESS_TOKEN_SECRET env variable.
--api-key API_KEY Twitter API key. Can also be configured in a
.minetrc file as "twitter.api_key" or read from
the MINET_TWITTER_API_KEY env variable.
--api-secret-key API_SECRET_KEY
Twitter API secret key. Can also be configured
in a .minetrc file as "twitter.api_secret_key"
or read from the MINET_TWITTER_API_SECRET_KEY
env variable.
--ids Whether your users are given as ids rather than
screen names.
--retweeted-id RETWEETED_ID Name of the column containing the ids of the
original tweets in case the tweets no longer
available were retweets.
--user USER Name of the column containing the tweet's author
(given as ids or screen names). This is useful
to have more information on a tweet's
unavailability.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the tweet urls or ids you want to process. Will
consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--resume "Whether to resume from an aborted collection.
Need -o to be set.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Finding out if tweets in a CSV files are still available or not using tweet ids:
$ minet tw attrition tweet_url -i deleted_tweets.csv > attrition-report.csv
. Finding out if tweets are still available or not using tweet & user ids:
$ minet tw attrition tweet_id -i deleted_tweets.csv --user user_id --ids > attrition-report.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet twitter attrition "value"
. Here is how to use a command with a CSV file:
$ minet twitter attrition column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet twitter attrition column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet twitter attrition column_name -i file.csv --explode "|"
. This also works with single values:
$ minet twitter attrition "value1,value2" --explode ","
Usage: minet twitter followers [-h] [--ids] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--v2] [--api-key API_KEY]
[--rcfile RCFILE]
[--api-secret-key API_SECRET_KEY]
[--access-token ACCESS_TOKEN]
[--access-token-secret ACCESS_TOKEN_SECRET]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [--resume] [-o OUTPUT]
user_or_user_column
# Minet Twitter Followers Command
Retrieve followers, i.e. followed users, of given user.
Positional Arguments:
user_or_user_column Single Twitter account screen name or id to
process or name of the CSV column containing
Twitter account screen names or ids when using
-i/--input.
Options:
--access-token ACCESS_TOKEN Twitter API access token. Can also be configured
in a .minetrc file as "twitter.access_token" or
read from the MINET_TWITTER_ACCESS_TOKEN env
variable.
--access-token-secret ACCESS_TOKEN_SECRET
Twitter API access token secret. Can also be
configured in a .minetrc file as
"twitter.access_token_secret" or read from the
MINET_TWITTER_ACCESS_TOKEN_SECRET env variable.
--api-key API_KEY Twitter API key. Can also be configured in a
.minetrc file as "twitter.api_key" or read from
the MINET_TWITTER_API_KEY env variable.
--api-secret-key API_SECRET_KEY
Twitter API secret key. Can also be configured
in a .minetrc file as "twitter.api_secret_key"
or read from the MINET_TWITTER_API_SECRET_KEY
env variable.
--ids Whether your users are given as ids rather than
screen names.
--v2 Whether to use latest Twitter API v2 rather than
v1.1.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the Twitter account screen names or ids you want
to process. Will consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--resume "Whether to resume from an aborted collection.
Need -o to be set.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Getting followers of a list of user:
$ minet tw followers screen_name -i users.csv > followers.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet twitter followers "value"
. Here is how to use a command with a CSV file:
$ minet twitter followers column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet twitter followers column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet twitter followers column_name -i file.csv --explode "|"
. This also works with single values:
$ minet twitter followers "value1,value2" --explode ","
Usage: minet twitter followers-you-know [-h] [-c COOKIE] [--rcfile RCFILE]
[--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress]
[--timezone TIMEZONE] [-i INPUT]
[--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
user_id_or_user_id_column
# Minet Twitter Followers You Know Command
Scrape Twitter's public facing "followers you know" lists such
as the one shown here on the website:
https://twitter.com/DEFACTO_UE/followers_you_follow
Note that this command only work when you provide user ids, as
providing screen names will not work.
Be aware that follower lists on Twitter currently are known
to be inconsistent when the actual number of users is roughly
over 50.
Positional Arguments:
user_id_or_user_id_column Single user_id to process or name of the CSV
column containing user ids when using
-i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "twitter.cookie" or read from
the MINET_TWITTER_COOKIE env variable.
--timezone TIMEZONE Timezone for dates, for example 'Europe/Paris'.
Defaults to UTC.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the user ids you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Collecting the followers you know from some user id:
$ minet tw followers-you-know 794083798912827393 > users.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet twitter followers-you-know "value"
. Here is how to use a command with a CSV file:
$ minet twitter followers-you-know column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet twitter followers-you-know column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet twitter followers-you-know column_name -i file.csv --explode "|"
. This also works with single values:
$ minet twitter followers-you-know "value1,value2" --explode ","
Usage: minet twitter friends [-h] [--ids] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--v2] [--api-key API_KEY]
[--rcfile RCFILE] [--api-secret-key API_SECRET_KEY]
[--access-token ACCESS_TOKEN]
[--access-token-secret ACCESS_TOKEN_SECRET]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [--resume] [-o OUTPUT]
user_or_user_column
# Minet Twitter Friends Command
Retrieve friends, i.e. followed users, of given user.
Positional Arguments:
user_or_user_column Single Twitter account screen name or id to
process or name of the CSV column containing
Twitter account screen names or ids when using
-i/--input.
Options:
--access-token ACCESS_TOKEN Twitter API access token. Can also be configured
in a .minetrc file as "twitter.access_token" or
read from the MINET_TWITTER_ACCESS_TOKEN env
variable.
--access-token-secret ACCESS_TOKEN_SECRET
Twitter API access token secret. Can also be
configured in a .minetrc file as
"twitter.access_token_secret" or read from the
MINET_TWITTER_ACCESS_TOKEN_SECRET env variable.
--api-key API_KEY Twitter API key. Can also be configured in a
.minetrc file as "twitter.api_key" or read from
the MINET_TWITTER_API_KEY env variable.
--api-secret-key API_SECRET_KEY
Twitter API secret key. Can also be configured
in a .minetrc file as "twitter.api_secret_key"
or read from the MINET_TWITTER_API_SECRET_KEY
env variable.
--ids Whether your users are given as ids rather than
screen names.
--v2 Whether to use latest Twitter API v2 rather than
v1.1.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the Twitter account screen names or ids you want
to process. Will consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--resume "Whether to resume from an aborted collection.
Need -o to be set.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Getting friends of a list of user:
$ minet tw friends screen_name -i users.csv > friends.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet twitter friends "value"
. Here is how to use a command with a CSV file:
$ minet twitter friends column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet twitter friends column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet twitter friends column_name -i file.csv --explode "|"
. This also works with single values:
$ minet twitter friends "value1,value2" --explode ","
Usage: minet twitter list-followers [-h] [--api-key API_KEY] [--rcfile RCFILE]
[--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress]
[--api-secret-key API_SECRET_KEY]
[--access-token ACCESS_TOKEN]
[--access-token-secret ACCESS_TOKEN_SECRET]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
list_or_list_column
# Minet Twitter List Followers Command
Retrieve followers of given list using Twitter API v2.
Positional Arguments:
list_or_list_column Single Twitter list id or url to process or name
of the CSV column containing Twitter list ids or
urls when using -i/--input.
Options:
--access-token ACCESS_TOKEN Twitter API access token. Can also be configured
in a .minetrc file as "twitter.access_token" or
read from the MINET_TWITTER_ACCESS_TOKEN env
variable.
--access-token-secret ACCESS_TOKEN_SECRET
Twitter API access token secret. Can also be
configured in a .minetrc file as
"twitter.access_token_secret" or read from the
MINET_TWITTER_ACCESS_TOKEN_SECRET env variable.
--api-key API_KEY Twitter API key. Can also be configured in a
.minetrc file as "twitter.api_key" or read from
the MINET_TWITTER_API_KEY env variable.
--api-secret-key API_SECRET_KEY
Twitter API secret key. Can also be configured
in a .minetrc file as "twitter.api_secret_key"
or read from the MINET_TWITTER_API_SECRET_KEY
env variable.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the Twitter list ids or urls you want to
process. Will consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Getting followers of a list of lists:
$ minet tw list-followers id -i lists.csv > followers.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet twitter list-followers "value"
. Here is how to use a command with a CSV file:
$ minet twitter list-followers column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet twitter list-followers column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet twitter list-followers column_name -i file.csv --explode "|"
. This also works with single values:
$ minet twitter list-followers "value1,value2" --explode ","
Usage: minet twitter list-members [-h] [--api-key API_KEY] [--rcfile RCFILE]
[--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress]
[--api-secret-key API_SECRET_KEY]
[--access-token ACCESS_TOKEN]
[--access-token-secret ACCESS_TOKEN_SECRET]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
list_or_list_column
# Minet Twitter List Members Command
Retrieve members of given list using Twitter API v2.
Positional Arguments:
list_or_list_column Single Twitter list id or url to process or name
of the CSV column containing Twitter list ids or
urls when using -i/--input.
Options:
--access-token ACCESS_TOKEN Twitter API access token. Can also be configured
in a .minetrc file as "twitter.access_token" or
read from the MINET_TWITTER_ACCESS_TOKEN env
variable.
--access-token-secret ACCESS_TOKEN_SECRET
Twitter API access token secret. Can also be
configured in a .minetrc file as
"twitter.access_token_secret" or read from the
MINET_TWITTER_ACCESS_TOKEN_SECRET env variable.
--api-key API_KEY Twitter API key. Can also be configured in a
.minetrc file as "twitter.api_key" or read from
the MINET_TWITTER_API_KEY env variable.
--api-secret-key API_SECRET_KEY
Twitter API secret key. Can also be configured
in a .minetrc file as "twitter.api_secret_key"
or read from the MINET_TWITTER_API_SECRET_KEY
env variable.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the Twitter list ids or urls you want to
process. Will consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Getting members of a list of lists:
$ minet tw list-members id -i lists.csv > members.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet twitter list-members "value"
. Here is how to use a command with a CSV file:
$ minet twitter list-members column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet twitter list-members column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet twitter list-members column_name -i file.csv --explode "|"
. This also works with single values:
$ minet twitter list-members "value1,value2" --explode ","
Usage: minet twitter retweeters [-h] [--timezone TIMEZONE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--api-key API_KEY]
[--rcfile RCFILE]
[--api-secret-key API_SECRET_KEY]
[--access-token ACCESS_TOKEN]
[--access-token-secret ACCESS_TOKEN_SECRET]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
tweet_id_or_tweet_id_column
# Minet Twitter Retweeters Command
Retrieve retweeters of given tweet using Twitter API v2.
Positional Arguments:
tweet_id_or_tweet_id_column Single tweet id to process or name of the CSV
column containing tweet ids when using
-i/--input.
Options:
--access-token ACCESS_TOKEN Twitter API access token. Can also be configured
in a .minetrc file as "twitter.access_token" or
read from the MINET_TWITTER_ACCESS_TOKEN env
variable.
--access-token-secret ACCESS_TOKEN_SECRET
Twitter API access token secret. Can also be
configured in a .minetrc file as
"twitter.access_token_secret" or read from the
MINET_TWITTER_ACCESS_TOKEN_SECRET env variable.
--api-key API_KEY Twitter API key. Can also be configured in a
.minetrc file as "twitter.api_key" or read from
the MINET_TWITTER_API_KEY env variable.
--api-secret-key API_SECRET_KEY
Twitter API secret key. Can also be configured
in a .minetrc file as "twitter.api_secret_key"
or read from the MINET_TWITTER_API_SECRET_KEY
env variable.
--timezone TIMEZONE Timezone for dates, for example 'Europe/Paris'.
Defaults to UTC.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the tweet ids you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Getting the users who retweeted a list of tweets:
$ minet tw retweeters tweet_id -i tweets.csv > retweeters.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet twitter retweeters "value"
. Here is how to use a command with a CSV file:
$ minet twitter retweeters column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet twitter retweeters column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet twitter retweeters column_name -i file.csv --explode "|"
. This also works with single values:
$ minet twitter retweeters "value1,value2" --explode ","
Usage: minet twitter scrape [-h] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--include-refs] [-l LIMIT]
[--query-template QUERY_TEMPLATE] [-c COOKIE]
[--rcfile RCFILE] [-f] [--timezone TIMEZONE]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
{tweets,users} query_or_query_column
# Minet Twitter Scrape Command
Scrape Twitter's public facing search API to collect tweets or users.
Be sure to check Twitter's advanced search to check what kind of
operators you can use to tune your queries (time range, hashtags,
mentions, boolean etc.):
https://twitter.com/search-advanced?f=live
Useful operators include "since" and "until" to search specific
time ranges like so: "since:2014-01-01 until:2017-12-31", or "from" that
let you search all tweets from a given user like so: "from:medialab_ScPo".
Note that since 2023-04-21, Twitter search is not available to
visitors of the website without being logged in. This means that
the scraper now requires some cookies to be able to work. So, by
default, the command will grab the relevant cookies from your
local Firefox browser (be sure to be logged in). But you can also
ask the command to grab the cookie from another browser or provide
the cookie string directly instead. Check the -c/--cookie docs to
figure out how to proceed.
Finally, be advised that since you are actually using your account
to scrape data, there is nothing preventing Twitter from banning your
account and it might very well happen in the future (who knows?).
BEWARE: the web search results seem to become inconsistent when
queries return vast amounts of tweets. In which case you are
strongly advised to segment your queries using temporal filters.
NOTE 2023-07-12: scraping users does not work anymore for now.
Tweet scraping was fixed but He-Who-Must-Not-Be-Named breaks things
on a daily basis so be warned this might not be very stable nor
consistent.
Positional Arguments:
{tweets,users} What to scrape. Currently only allows for
`tweets` or `users`.
query_or_query_column Single query to process or name of the CSV
column containing queries when using -i/--input.
Options:
-c, --cookie COOKIE Authenticated cookie to use or browser from
which to extract it (supports "firefox",
"chrome", "chromium", "opera" and "edge").
Defaults to `firefox`. Can also be configured in
a .minetrc file as "twitter.cookie" or read from
the MINET_TWITTER_COOKIE env variable.
-f, --force Bypass confirmation.
--include-refs Whether to emit referenced tweets (quoted,
retweeted & replied) in the CSV output. Note
that it consumes a memory proportional to the
total number of unique tweets retrieved.
-l, --limit LIMIT Maximum number of tweets or users to collect per
query.
--query-template QUERY_TEMPLATE
Query template. Can be useful for instance to
change a column of twitter user screen names
into from:@user queries.
--timezone TIMEZONE Timezone for dates, for example 'Europe/Paris'.
Defaults to UTC.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the queries you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Collecting the latest 500 tweets of a given Twitter user:
$ minet tw scrape tweets "from:@jack" --limit 500 > tweets.csv
. Collecting the tweets from multiple Twitter queries listed in a CSV file:
$ minet tw scrape tweets query -i queries.csv > tweets.csv
. Templating the given CSV column to query tweets by users:
$ minet tw scrape tweets user -i users.csv --query-template 'from:@{value}' > tweets.csv
. Collecting users with "adam" in their user_name or user_description:
$ minet tw scrape users adam > users.csv
Tips:
- You can add a "OR @aNotExistingHandle" to your query to avoid searching
for your query terms in usernames or handles. Note that this is a temporary hack
which might stop working at any time so be sure to double check before relying on
this trick.
$ minet tw scrape tweets "keyword OR @anObviouslyNotExistingHandle"
For more information see the related discussion here:
https://webapps.stackexchange.com/questions/127425/how-to-exclude-usernames-and-handles-while-searching-twitter
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet twitter scrape "value"
. Here is how to use a command with a CSV file:
$ minet twitter scrape column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet twitter scrape column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet twitter scrape column_name -i file.csv --explode "|"
. This also works with single values:
$ minet twitter scrape "value1,value2" --explode ","
Usage: minet twitter tweet-date [-h] [--timezone TIMEZONE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-i INPUT]
[--explode EXPLODE] [-s SELECT] [--total TOTAL]
[-o OUTPUT]
tweet_or_tweet_column
# Minet Twitter Tweet Date Command
Getting timestamp and date from tweet url or id.
Positional Arguments:
tweet_or_tweet_column Single tweet url or id to process or name of the
CSV column containing tweet urls or ids when
using -i/--input.
Options:
--timezone TIMEZONE Timezone for dates, for example 'Europe/Paris'.
Defaults to UTC.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the tweet urls or ids you want to process. Will
consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
$ minet tw tweet-date url -i tweets.csv --timezone 'Europe/Paris'> tweets_timestamp_date.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet twitter tweet-date "value"
. Here is how to use a command with a CSV file:
$ minet twitter tweet-date column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet twitter tweet-date column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet twitter tweet-date column_name -i file.csv --explode "|"
. This also works with single values:
$ minet twitter tweet-date "value1,value2" --explode ","
Usage: minet twitter tweet-search [-h] [--since-id SINCE_ID] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--until-id UNTIL_ID]
[--start-time START_TIME]
[--end-time END_TIME] [--academic]
[--timezone TIMEZONE]
[--sort-order {recency,relevancy}]
[--api-key API_KEY] [--rcfile RCFILE]
[--api-secret-key API_SECRET_KEY]
[--access-token ACCESS_TOKEN]
[--access-token-secret ACCESS_TOKEN_SECRET]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
query_or_query_column
# Minet Twitter Tweets Search Command
Search Twitter tweets using API v2.
This will only return the last 8 days of results maximum per query (unless you have Academic Research access).
To search the full archive of public tweets, use --academic if you have academic research access.
Positional Arguments:
query_or_query_column Single query to process or name of the CSV
column containing queries when using -i/--input.
Options:
--academic Flag to add if you want to use your academic
research access (in order to search the complete
history of public tweets).
--access-token ACCESS_TOKEN Twitter API access token. Can also be configured
in a .minetrc file as "twitter.access_token" or
read from the MINET_TWITTER_ACCESS_TOKEN env
variable.
--access-token-secret ACCESS_TOKEN_SECRET
Twitter API access token secret. Can also be
configured in a .minetrc file as
"twitter.access_token_secret" or read from the
MINET_TWITTER_ACCESS_TOKEN_SECRET env variable.
--api-key API_KEY Twitter API key. Can also be configured in a
.minetrc file as "twitter.api_key" or read from
the MINET_TWITTER_API_KEY env variable.
--api-secret-key API_SECRET_KEY
Twitter API secret key. Can also be configured
in a .minetrc file as "twitter.api_secret_key"
or read from the MINET_TWITTER_API_SECRET_KEY
env variable.
--end-time END_TIME The newest UTC datetime from which the tweets
will be counted. The date should have the
format: "YYYY-MM-DDTHH:mm:ssZ" but incomplete
dates will be completed for you e.g. "2002-04".
--since-id SINCE_ID Will return tweets with ids that are greater
than the specified id. Takes precedence over
--start-time.
--sort-order {recency,relevancy}
How to sort retrieved tweets. Defaults to
`recency`.
--start-time START_TIME The oldest UTC datetime from which the tweets
will be counted. The date should have the
format: "YYYY-MM-DDTHH:mm:ssZ" but incomplete
dates will be completed for you e.g. "2002-04".
--timezone TIMEZONE Timezone for dates, for example 'Europe/Paris'.
Defaults to UTC.
--until-id UNTIL_ID Will return tweets that are older than the tweet
with the specified id.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the queries you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Searching tweets using "cancer" as a query:
$ minet tw tweet-search cancer > tweets.csv
. Running multiple queries in series:
$ minet tw tweet-search query -i queries.csv > tweets.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet twitter tweet-search "value"
. Here is how to use a command with a CSV file:
$ minet twitter tweet-search column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet twitter tweet-search column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet twitter tweet-search column_name -i file.csv --explode "|"
. This also works with single values:
$ minet twitter tweet-search "value1,value2" --explode ","
Usage: minet twitter tweet-count [-h] [--granularity {day,hour,minute}]
[--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--since-id SINCE_ID]
[--until-id UNTIL_ID] [--start-time START_TIME]
[--end-time END_TIME] [--academic]
[--api-key API_KEY] [--rcfile RCFILE]
[--api-secret-key API_SECRET_KEY]
[--access-token ACCESS_TOKEN]
[--access-token-secret ACCESS_TOKEN_SECRET]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
query_or_query_column
# Minet Twitter Tweets Count Command
Count the number of tweets matching a given query using
Twitter API v2.
The counts can be granularized by day, hour or minute.
The API is also meant to return the total number of tweets
matching the query but this has been found to be unreliable
and inconsistent so you will have to sum the granularized
counts instead.
The current command does not aggregate per month or year
because sometimes the order of counts does not seem
to be reliable either (even if they are found to be complete
in the final output).
Note that if you don't have an academic access, this command
will only return counts for the last ~7 days only.
If you have an academic access, don't forget to use the
--academic flag.
Finally note that sometimes, the API returns no data instead
of counts of 0, in which case no lines will be emitted in
the CSV output for the affected query.
API docs for the relevant call:
https://developer.twitter.com/en/docs/twitter-api/tweets/counts/api-reference/get-tweets-counts-recent
API docs for the academic call:
https://developer.twitter.com/en/docs/twitter-api/tweets/counts/api-reference/get-tweets-counts-all
Positional Arguments:
query_or_query_column Single query to process or name of the CSV
column containing queries when using -i/--input.
Options:
--academic Flag to add if you want to use your academic
research access (in order to search the complete
history of public tweets).
--access-token ACCESS_TOKEN Twitter API access token. Can also be configured
in a .minetrc file as "twitter.access_token" or
read from the MINET_TWITTER_ACCESS_TOKEN env
variable.
--access-token-secret ACCESS_TOKEN_SECRET
Twitter API access token secret. Can also be
configured in a .minetrc file as
"twitter.access_token_secret" or read from the
MINET_TWITTER_ACCESS_TOKEN_SECRET env variable.
--api-key API_KEY Twitter API key. Can also be configured in a
.minetrc file as "twitter.api_key" or read from
the MINET_TWITTER_API_KEY env variable.
--api-secret-key API_SECRET_KEY
Twitter API secret key. Can also be configured
in a .minetrc file as "twitter.api_secret_key"
or read from the MINET_TWITTER_API_SECRET_KEY
env variable.
--end-time END_TIME The newest UTC datetime from which the tweets
will be counted. The date should have the
format: "YYYY-MM-DDTHH:mm:ssZ" but incomplete
dates will be completed for you e.g. "2002-04".
--granularity {day,hour,minute}
Granularity used to group the data by. Defaults
to `day`.
--since-id SINCE_ID Will return tweets with ids that are greater
than the specified id. Takes precedence over
--start-time.
--start-time START_TIME The oldest UTC datetime from which the tweets
will be counted. The date should have the
format: "YYYY-MM-DDTHH:mm:ssZ" but incomplete
dates will be completed for you e.g. "2002-04".
--until-id UNTIL_ID Will return tweets that are older than the tweet
with the specified id.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the queries you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Counting tweets using "cancer" as a query:
$ minet tw tweet-count cancer
. Running multiple queries in series:
$ minet tw tweet-count query -i queries.csv > counts.csv
. Number of tweets matching the query per day:
$ minet tw tweet-count "query" --granularity day > counts.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet twitter tweet-count "value"
. Here is how to use a command with a CSV file:
$ minet twitter tweet-count column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet twitter tweet-count column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet twitter tweet-count column_name -i file.csv --explode "|"
. This also works with single values:
$ minet twitter tweet-count "value1,value2" --explode ","
Usage: minet twitter tweets [-h] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-i INPUT] [--explode EXPLODE]
[-s SELECT] [--total TOTAL] [--resume] [-o OUTPUT]
tweet_id_or_tweet_id_column
# Minet Twitter Tweets Command
Collecting tweet metadata by scraping the website.
Positional Arguments:
tweet_id_or_tweet_id_column Single tweet id to process or name of the CSV
column containing tweet ids when using
-i/--input.
Options:
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the tweet ids you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--resume "Whether to resume from an aborted collection.
Need -o to be set.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Getting metadata from tweets in a CSV file:
$ minet tw tweets tweet_id -i tweets.csv > tweets_metadata.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet twitter tweets "value"
. Here is how to use a command with a CSV file:
$ minet twitter tweets column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet twitter tweets column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet twitter tweets column_name -i file.csv --explode "|"
. This also works with single values:
$ minet twitter tweets "value1,value2" --explode ","
Usage: minet twitter users [-h] [--ids] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--v2] [--timezone TIMEZONE]
[--api-key API_KEY] [--rcfile RCFILE]
[--api-secret-key API_SECRET_KEY]
[--access-token ACCESS_TOKEN]
[--access-token-secret ACCESS_TOKEN_SECRET]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [--resume] [-o OUTPUT]
user_or_user_column
# Minet Twitter Users Command
Retrieve Twitter user metadata using the API.
Positional Arguments:
user_or_user_column Single Twitter user to process or name of the
CSV column containing Twitter users when using
-i/--input.
Options:
--access-token ACCESS_TOKEN Twitter API access token. Can also be configured
in a .minetrc file as "twitter.access_token" or
read from the MINET_TWITTER_ACCESS_TOKEN env
variable.
--access-token-secret ACCESS_TOKEN_SECRET
Twitter API access token secret. Can also be
configured in a .minetrc file as
"twitter.access_token_secret" or read from the
MINET_TWITTER_ACCESS_TOKEN_SECRET env variable.
--api-key API_KEY Twitter API key. Can also be configured in a
.minetrc file as "twitter.api_key" or read from
the MINET_TWITTER_API_KEY env variable.
--api-secret-key API_SECRET_KEY
Twitter API secret key. Can also be configured
in a .minetrc file as "twitter.api_secret_key"
or read from the MINET_TWITTER_API_SECRET_KEY
env variable.
--ids Whether your users are given as ids rather than
screen names.
--timezone TIMEZONE Timezone for dates, for example 'Europe/Paris'.
Defaults to UTC.
--v2 Whether to use latest Twitter API v2 rather than
v1.1.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the Twitter users you want to process. Will
consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--resume "Whether to resume from an aborted collection.
Need -o to be set.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Getting friends of a list of user:
$ minet tw users screen_name -i users.csv > data_users.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet twitter users "value"
. Here is how to use a command with a CSV file:
$ minet twitter users column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet twitter users column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet twitter users column_name -i file.csv --explode "|"
. This also works with single values:
$ minet twitter users "value1,value2" --explode ","
Usage: minet twitter user-search [-h] [--timezone TIMEZONE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--api-key API_KEY]
[--rcfile RCFILE]
[--api-secret-key API_SECRET_KEY]
[--access-token ACCESS_TOKEN]
[--access-token-secret ACCESS_TOKEN_SECRET]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
query_or_query_column
# Minet Twitter Users Search Command
Search Twitter users using API v1.
This will only return ~1000 results maximum per query
so you might want to find a way to segment your inquiry
into smaller queries to find more users.
Positional Arguments:
query_or_query_column Single query to process or name of the CSV
column containing queries when using -i/--input.
Options:
--access-token ACCESS_TOKEN Twitter API access token. Can also be configured
in a .minetrc file as "twitter.access_token" or
read from the MINET_TWITTER_ACCESS_TOKEN env
variable.
--access-token-secret ACCESS_TOKEN_SECRET
Twitter API access token secret. Can also be
configured in a .minetrc file as
"twitter.access_token_secret" or read from the
MINET_TWITTER_ACCESS_TOKEN_SECRET env variable.
--api-key API_KEY Twitter API key. Can also be configured in a
.minetrc file as "twitter.api_key" or read from
the MINET_TWITTER_API_KEY env variable.
--api-secret-key API_SECRET_KEY
Twitter API secret key. Can also be configured
in a .minetrc file as "twitter.api_secret_key"
or read from the MINET_TWITTER_API_SECRET_KEY
env variable.
--timezone TIMEZONE Timezone for dates, for example 'Europe/Paris'.
Defaults to UTC.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the queries you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Searching user using "cancer" as a query:
$ minet tw user-search cancer > users.csv
. Running multiple queries in series:
$ minet tw user-search query -i queries.csv > users.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet twitter user-search "value"
. Here is how to use a command with a CSV file:
$ minet twitter user-search column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet twitter user-search column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet twitter user-search column_name -i file.csv --explode "|"
. This also works with single values:
$ minet twitter user-search "value1,value2" --explode ","
Usage: minet twitter user-tweets [-h] [--ids] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--min-date MIN_DATE]
[--exclude-retweets] [--v2]
[--timezone TIMEZONE] [--api-key API_KEY]
[--rcfile RCFILE]
[--api-secret-key API_SECRET_KEY]
[--access-token ACCESS_TOKEN]
[--access-token-secret ACCESS_TOKEN_SECRET]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
user_or_user_column
# Minet Twitter User Tweets Command
Retrieve the last ~3200 tweets, including retweets from
the given Twitter users, using the API.
Positional Arguments:
user_or_user_column Single Twitter account screen name or id to
process or name of the CSV column containing
Twitter account screen names or ids when using
-i/--input.
Options:
--access-token ACCESS_TOKEN Twitter API access token. Can also be configured
in a .minetrc file as "twitter.access_token" or
read from the MINET_TWITTER_ACCESS_TOKEN env
variable.
--access-token-secret ACCESS_TOKEN_SECRET
Twitter API access token secret. Can also be
configured in a .minetrc file as
"twitter.access_token_secret" or read from the
MINET_TWITTER_ACCESS_TOKEN_SECRET env variable.
--api-key API_KEY Twitter API key. Can also be configured in a
.minetrc file as "twitter.api_key" or read from
the MINET_TWITTER_API_KEY env variable.
--api-secret-key API_SECRET_KEY
Twitter API secret key. Can also be configured
in a .minetrc file as "twitter.api_secret_key"
or read from the MINET_TWITTER_API_SECRET_KEY
env variable.
--exclude-retweets Whether to exclude retweets from the output.
--ids Whether your users are given as ids rather than
screen names.
--min-date MIN_DATE Whether to add a date to stop at for user's
tweets retrieval. UTC date should have the
following format : YYYY-MM-DD
--timezone TIMEZONE Timezone for dates, for example 'Europe/Paris'.
Defaults to UTC.
--v2 Whether to use latest Twitter API v2 rather than
v1.1.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the Twitter account screen names or ids you want
to process. Will consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Getting tweets from users in a CSV file:
$ minet tw user-tweets screen_name -i users.csv > tweets.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet twitter user-tweets "value"
. Here is how to use a command with a CSV file:
$ minet twitter user-tweets column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet twitter user-tweets column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet twitter user-tweets column_name -i file.csv --explode "|"
. This also works with single values:
$ minet twitter user-tweets "value1,value2" --explode ","
Usage: minet wikipedia pageviews [-h] --start-date START_DATE [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] --end-date END_DATE
[--agent AGENT] [--access ACCESS] [-t THREADS]
[--granularity GRANULARITY] [--sum]
[--lang LANG] [--lang-column LANG_COLUMN]
[-i INPUT] [--explode EXPLODE] [-s SELECT]
[--total TOTAL] [--resume] [-o OUTPUT]
page_or_page_column
# Minet Wikipedia Pageviews Command
Command using the Wikimedia REST API to collect
pageviews for a given amount of Wikipedia pages.
See API documentation here for more details:
https://wikitech.wikimedia.org/wiki/Analytics/AQS/Pageviews
Positional Arguments:
page_or_page_column Single page to process or name of the CSV column
containing pages when using -i/--input.
Options:
--access ACCESS Get pageviews by access. Defaults to
`all-access`.
--agent AGENT Get pageviews by target agent. Defaults to
`all-agents`.
--end-date END_DATE End date. Must be of format YYYYMMDD (e.g.
20151031) or YYYYMMDDHH (e.g. 2015103100)
--granularity GRANULARITY Pageviews granularity. Defaults to `monthly`.
--lang LANG Lang for the given pages.
--lang-column LANG_COLUMN Name of a CSV column containing page lang.
--start-date START_DATE Starting date. Must be of format YYYYMMDD (e.g.
20151031) or YYYYMMDDHH (e.g. 2015103100)
--sum Whether to sum the collected pageviews rather
than outputting them by timestamp.
-t, --threads THREADS Number of threads to use. Defaults to `10`.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the pages you want to process. Will consider `-`
as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--resume "Whether to resume from an aborted collection.
Need -o to be set. Will only work with --sum.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet wikipedia pageviews "value"
. Here is how to use a command with a CSV file:
$ minet wikipedia pageviews column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet wikipedia pageviews column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet wikipedia pageviews column_name -i file.csv --explode "|"
. This also works with single values:
$ minet wikipedia pageviews "value1,value2" --explode ","
Usage: minet youtube captions [-h] [--lang LANG] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-c] [-i INPUT]
[--explode EXPLODE] [-s SELECT] [--total TOTAL]
[-o OUTPUT]
video_or_video_column
# YouTube captions
Retrieve captions for the given YouTube videos.
Positional Arguments:
video_or_video_column Single video url or id to process or name of the
CSV column containing video urls or ids when
using -i/--input.
Options:
-c, --collapse Use this flag to only emit one line per video,
with the subtitle lines joined together in a
single cell. Note that this means losing start &
duration information of the subtitles.
--lang LANG Language (ISO code like "en") of captions to
retrieve. You can specify several languages by
preferred order separated by commas. Defaults to
`en`.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the video urls or ids you want to process. Will
consider `-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Fetching captions for a list of videos:
$ minet yt captions video_id -i videos.csv > captions.csv
. Fetching French captions with a fallback to English:
$ minet yt captions video_id -i videos.csv --lang fr,en > captions.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet youtube captions "value"
. Here is how to use a command with a CSV file:
$ minet youtube captions column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet youtube captions column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet youtube captions column_name -i file.csv --explode "|"
. This also works with single values:
$ minet youtube captions "value1,value2" --explode ","
Usage: minet youtube channel-videos [-h] [--start-time START_TIME] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [--end-time END_TIME]
[-k KEY] [--rcfile RCFILE] [-i INPUT]
[--explode EXPLODE] [-s SELECT]
[--total TOTAL] [-o OUTPUT]
channel_or_channel_column
# YouTube channel videos
Retrieve metadata about all YouTube videos from one or many channel(s) using the API.
Under the hood, this command extract the channel id from the given url or scrape the
website to find it if necessary. Then the command uses the API to retrieve
information about videos stored in the main playlist of the channel
supposed to contain all the channel's videos.
Positional Arguments:
channel_or_channel_column Single channel to process or name of the CSV
column containing channels when using
-i/--input.
Options:
--end-time END_TIME The newest UTC datetime from which the videos
will be retrieved (end-time is excluded).
Warning: videos more recent than end-time will
still be retrieved from the API, but they will
not be written in the output file. The date
should have the format: "YYYY-MM-DDTHH:mm:ssZ"
but incomplete dates will be completed for you
e.g. "2002-04".
-k, --key KEY YouTube API Data dashboard API key. Can be used
more than once. Can also be configured in a
.minetrc file as "youtube.key" or read from the
MINET_YOUTUBE_KEY env variable.
--start-time START_TIME The oldest UTC datetime from which the videos
will be retrieved (start-time is included). The
date should have the format:
"YYYY-MM-DDTHH:mm:ssZ" but incomplete dates will
be completed for you e.g. "2002-04".
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the channels you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Fetching all the videos from a channel based on the channel's id or url:
$ minet youtube channel-videos https://www.youtube.com/c/LinksOff -k my-api-key > linksoff_videos.csv
$ minet youtube channel-videos https://www.youtube.com/channel/UCqnbDFdCpuN8CMEg0VuEBqA -k my-api-key > thenewyorktimes_videos.csv
$ minet youtube channel-videos UCprclkVrNPls7PR-nHhf1Ow -k my-api-key > tonyheller_videos.csv
. Fetching multiple channels' videos:
$ minet youtube channel-videos channel_id -i channels_id.csv -k my-api-key > channels_videos.csv
$ minet youtube channel-videos channel_url -i channels_url.csv -k my-api-key > channels_videos.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet youtube channel-videos "value"
. Here is how to use a command with a CSV file:
$ minet youtube channel-videos column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet youtube channel-videos column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet youtube channel-videos column_name -i file.csv --explode "|"
. This also works with single values:
$ minet youtube channel-videos "value1,value2" --explode ","
Usage: minet youtube channels [-h] [-k KEY] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-i INPUT] [--explode EXPLODE]
[-s SELECT] [--total TOTAL] [-o OUTPUT]
channel_or_channel_column
# YouTube Channels Command
Retrieve metadata about YouTube channel from one or many name(s) using the API.
Under the hood, this command extract the channel id from the given url or scrape the
website to find it if necessary. Then the command uses the API to retrieve
information about the channel.
Positional Arguments:
channel_or_channel_column Single channel to process or name of the CSV
column containing channels when using
-i/--input.
Options:
-k, --key KEY YouTube API Data dashboard API key. Can be used
more than once. Can also be configured in a
.minetrc file as "youtube.key" or read from the
MINET_YOUTUBE_KEY env variable.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the channels you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Fetching metadata from a channel based on the channel's id or url:
$ minet youtube channels https://www.youtube.com/c/LinksOff -k my-api-key > linksoff_meta.csv
$ minet youtube channels https://www.youtube.com/channel/UCqnbDFdCpuN8CMEg0VuEBqA -k my-api-key > thenewyorktimes_meta.csv
$ minet youtube channels UCprclkVrNPls7PR-nHhf1Ow -k my-api-key > tonyheller_meta.csv
. Fetching multiple channels' metadata:
$ minet youtube channels channel_id -i channels_id.csv -k my-api-key > channels.csv
$ minet youtube channels channel_url -i channels_url.csv -k my-api-key > channels.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet youtube channels "value"
. Here is how to use a command with a CSV file:
$ minet youtube channels column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet youtube channels column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet youtube channels column_name -i file.csv --explode "|"
. This also works with single values:
$ minet youtube channels "value1,value2" --explode ","
Usage: minet youtube comments [-h] [-k KEY] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-i INPUT] [--explode EXPLODE]
[-s SELECT] [--total TOTAL] [-o OUTPUT]
video_or_video_column
# YouTube comments
Retrieve metadata about YouTube comments using the API.
Positional Arguments:
video_or_video_column Single video to process or name of the CSV
column containing videos when using -i/--input.
Options:
-k, --key KEY YouTube API Data dashboard API key. Can be used
more than once. Can also be configured in a
.minetrc file as "youtube.key" or read from the
MINET_YOUTUBE_KEY env variable.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the videos you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Fetching a video's comments:
$ minet yt comments https://www.youtube.com/watch?v=7JTb2vf1OQQ -k my-api-key > comments.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet youtube comments "value"
. Here is how to use a command with a CSV file:
$ minet youtube comments column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet youtube comments column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet youtube comments column_name -i file.csv --explode "|"
. This also works with single values:
$ minet youtube comments "value1,value2" --explode ","
Usage: minet youtube search [-h] [-l LIMIT] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress]
[--order {date,rating,relevance,title,videoCount,viewCount}]
[-k KEY] [--rcfile RCFILE] [-i INPUT]
[--explode EXPLODE] [-s SELECT] [--total TOTAL]
[-o OUTPUT]
query_or_query_column
# YouTube search
Search videos using the YouTube API.
Note that, even if undocumented, the API will never return
more than approx. 500 videos for a given query.
Positional Arguments:
query_or_query_column Single query to process or name of the CSV
column containing queries when using -i/--input.
Options:
-k, --key KEY YouTube API Data dashboard API key. Can be used
more than once. Can also be configured in a
.minetrc file as "youtube.key" or read from the
MINET_YOUTUBE_KEY env variable.
-l, --limit LIMIT Maximum number of videos to retrieve per query.
--order {date,rating,relevance,title,videoCount,viewCount}
Order in which videos are retrieved. The default
one is relevance. Defaults to `relevance`.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the queries you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
Examples:
. Searching videos about birds:
$ minet youtube search bird -k my-api-key > bird_videos.csv
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet youtube search "value"
. Here is how to use a command with a CSV file:
$ minet youtube search column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet youtube search column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet youtube search column_name -i file.csv --explode "|"
. This also works with single values:
$ minet youtube search "value1,value2" --explode ","
Usage: minet youtube videos [-h] [-k KEY] [--rcfile RCFILE] [--silent]
[--refresh-per-second REFRESH_PER_SECOND]
[--simple-progress] [-i INPUT] [--explode EXPLODE]
[-s SELECT] [--total TOTAL] [-o OUTPUT]
video_or_video_column
# YouTube videos
Retrieve metadata about YouTube videos using the API.
Positional Arguments:
video_or_video_column Single video to process or name of the CSV
column containing videos when using -i/--input.
Options:
-k, --key KEY YouTube API Data dashboard API key. Can be used
more than once. Can also be configured in a
.minetrc file as "youtube.key" or read from the
MINET_YOUTUBE_KEY env variable.
-s, --select SELECT Columns of -i/--input CSV file to include in the
output (separated by `,`). Use an empty string
if you don't want to keep anything: --select ''.
--explode EXPLODE Use to indicate the character used to separate
multiple values in a single CSV cell. Defaults
to none, i.e. CSV cells having a single values,
which is usually the case.
--total TOTAL Total number of items to process. Might be
necessary when you want to display a finite
progress indicator for large files given as
input to the command.
-i, --input INPUT CSV file (potentially gzipped) containing all
the videos you want to process. Will consider
`-` as stdin.
-o, --output OUTPUT Path to the output file. Will consider `-` as
stdout. If not given, results will also be
printed to stdout.
--rcfile RCFILE Custom path to a minet configuration file. More
info about this here:
https://github.com/medialab/minet/blob/master/do
cs/cli.md#minetrc
--refresh-per-second REFRESH_PER_SECOND
Number of times to refresh the progress bar per
second. Can be a float e.g. `0.5` meaning once
every two seconds. Use this to limit CPU usage
when launching multiple commands at once.
Defaults to `10`.
--simple-progress Whether to simplify the progress bar and make it
fit on a single line. Can be useful in terminals
with partial ANSI support, e.g. a Jupyter
notebook cell.
--silent Whether to suppress all the log and progress
bars. Can be useful when piping.
-h, --help show this help message and exit
how to use the command with a CSV file?
> A lot of minet commands, including this one, can both be
> given a single value to process or a bunch of them if
> given the column of a CSV file passed to -i/--input instead.
> Note that when given a CSV file as input, minet will
> concatenate the input file columns with the ones added
> by the command. You can always restrict the input file
> columns to keep by using the -s/--select flag.
. Here is how to use a command with a single value:
$ minet youtube videos "value"
. Here is how to use a command with a CSV file:
$ minet youtube videos column_name -i file.csv
. Here is how to read CSV file from stdin using `-`:
$ xan search -s col . | minet youtube videos column_name -i -
. Here is how to indicate that the CSV column may contain multiple
values separated by a special character:
$ minet youtube videos column_name -i file.csv --explode "|"
. This also works with single values:
$ minet youtube videos "value1,value2" --explode ","