Problem with Home Assistant after Update to 0.4.1: no data to mqtt

[ap20132022]

good morning
I have problem with this add on since I updated it to 0.4.1. I've tried to repair with since 2 days but without success.
I got:

s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service legacy-cont-init: starting
s6-rc: info: service legacy-cont-init successfully started
s6-rc: info: service legacy-services: starting
s6-rc: info: service legacy-services successfully started
[09:10:18] WARNING: rtl_433 now supports automatic configuration and multiple radios. The rtl_433_conf_file option is deprecated. See the documentation for migration instructions.
Starting rtl_433 -c /config/rtl_433/rtl_433.conf.template
rtl_433 version 22.11 branch  at 202211191645 inputs file rtl_tcp RTL-SDR
Use -h for usage help and see https://triq.org/ for documentation.
Publishing MQTT data to 192.168.0.151 port 1883
Publishing device info to MQTT topic "rtl_433[/id]".
Registered 1 out of 223 device decoding protocols
Found 1 device(s)

trying device  0:  Realtek, RTL2838UHIDIR, SN: 00000001
Found Fitipower FC0012 tuner
Using device 0: Generic RTL2832U OEM
Exact sample rate is: 250000.000414 Hz
Sample rate set to 250000 S/s.
Bit detection level set to 0.0 (Auto).
Tuner gain set to Auto.
Reading samples in async mode...
Tuned to 433.920MHz.
Allocating 15 zero-copy buffers
MQTT Connected...
MQTT Connection established.

from logfiles.
My configuration looks like:

frequency   433.920M

#protocol:
#protocol 3   # Prologue, FreeTec NC-7104, NC-7159-675 temperature sensor
#protocol 25  # Globaltronics GT-WT-02 Sensor
#protocol 153 # Cotech 36-7959 wireless weather station with USB
protocol 19 # Nexus
#protocol 173 # Bresser Weather Center 7-in-1

#convert     si
verbose 8
output json
output kv
#output log
output      mqtt://192.168.0.151:1883,user=xxx,pass=xxx,retain=0,devices=rtl_433[/id]
#analyze true

Have anyone an idea? Or how can I get more information from log?
Thank you very much for your help

[zuckschwerdt]

You likely want to ask at https://github.com/pbkhrv/rtl_433-hass-addons