Here's a step-by-step example of getting [Malcolm from GitHub]({{ site.github.repository_url }}/tree/{{ site.github.build_revision }}), configuring the local system and the Malcolm instance, and running it on a system running Ubuntu Linux. Installing Malcolm may require some variation depending on individual system configuration, but this should be a good starting point.
For a more in-depth guide convering installing both Malcolm and a Hedgehog Linux sensor using the Malcolm installer ISO and Hedgehog Linux installer ISO, see End-to-end Malcolm and Hedgehog Linux ISO Installation.
The commands in this example should be executed as a non-root user.
Use git
to clone Malcolm into a local working copy, or download and extract the artifacts from the [latest release]({{ site.github.repository_url }}/releases/latest).
To install Malcolm from the latest Malcolm release, browse to the [Malcolm releases page on GitHub]({{ site.github.repository_url }}/releases/latest) and download at a minimum the files ending in .py
and the malcolm_YYYYMMDD_HHNNSS_xxxxxxx.tar.gz
file, then navigate to the downloads directory:
user@host:~$ cd Downloads/
user@host:~/Downloads$ ls
malcolm_common.py malcolm_kubernetes.py malcolm_utils.py install.py malcolm_20190611_095410_ce2d8de.tar.gz
If obtaining Malcolm using git
instead, run the following command to clone Malcolm into a local working copy:
user@host:~$ git clone {{ site.github.repository_url }}
Cloning into 'Malcolm'...
remote: Enumerating objects: 443, done.
remote: Counting objects: 100% (443/443), done.
remote: Compressing objects: 100% (310/310), done.
remote: Total 443 (delta 81), reused 441 (delta 79), pack-reused 0
Receiving objects: 100% (443/443), 6.87 MiB | 18.86 MiB/s, done.
Resolving deltas: 100% (81/81), done.
user@host:~$ cd Malcolm/
Next, run the install.py
script to configure the system. Replace user
in this example with the local account username, and follow the prompts. Most questions have acceptable defaults that can be accepted by pressing the Enter
key. Depending on whether Malcolm is being installed from the release tarball or inside of a git working copy, the questions below will be slightly different, but for the most part are the same.
user@host:~/Malcolm$ sudo ./scripts/install.py
Installing required packages: ['apache2-utils', 'make', 'openssl', 'python3-dialog']
"docker info" failed, attempt to install Docker? (Y / n): y
Attempt to install Docker using official repositories? (Y / n): y
Installing required packages: ['apt-transport-https', 'ca-certificates', 'curl', 'gnupg-agent', 'software-properties-common']
Installing docker packages: ['docker-ce', 'docker-ce-cli', 'containerd.io']
Installation of docker packages apparently succeeded
Add a non-root user to the "docker" group?: y
Enter user account: user
Add another non-root user to the "docker" group?: n
"docker compose version" failed, attempt to install docker compose? (Y / n): y
Install docker compose directly from docker github? (Y / n): y
Download and installation of docker compose apparently succeeded
fs.file-max increases allowed maximum for file handles
fs.file-max= appears to be missing from /etc/sysctl.conf, append it? (Y / n): y
fs.inotify.max_user_watches increases allowed maximum for monitored files
fs.inotify.max_user_watches= appears to be missing from /etc/sysctl.conf, append it? (Y / n): y
fs.inotify.max_queued_events increases queue size for monitored files
fs.inotify.max_queued_events= appears to be missing from /etc/sysctl.conf, append it? (Y / n): y
fs.inotify.max_user_instances increases allowed maximum monitor file watchers
fs.inotify.max_user_instances= appears to be missing from /etc/sysctl.conf, append it? (Y / n): y
vm.max_map_count increases allowed maximum for memory segments
vm.max_map_count= appears to be missing from /etc/sysctl.conf, append it? (Y / n): y
net.core.somaxconn increases allowed maximum for socket connections
net.core.somaxconn= appears to be missing from /etc/sysctl.conf, append it? (Y / n): y
vm.swappiness adjusts the preference of the system to swap vs. drop runtime memory pages
vm.swappiness= appears to be missing from /etc/sysctl.conf, append it? (Y / n): y
vm.dirty_background_ratio defines the percentage of system memory fillable with "dirty" pages before flushing
vm.dirty_background_ratio= appears to be missing from /etc/sysctl.conf, append it? (Y / n): y
vm.dirty_ratio defines the maximum percentage of dirty system memory before committing everything
vm.dirty_ratio= appears to be missing from /etc/sysctl.conf, append it? (Y / n): y
/etc/security/limits.d/limits.conf increases the allowed maximums for file handles and memlocked segments
/etc/security/limits.d/limits.conf does not exist, create it? (Y / n): y
If Malcolm is being configured from within a git working copy, install.py
will now exit. Run ./scripts/configure
to continue with configuration:
user@host:~/Malcolm$ ./scripts/configure
Alternately, if Malcolm is being installed from the release tarball, the script will ask whether the user would like to extract the contents of the tarball and to specify the installation directory and Malcolm configuration will continue:
Extract Malcolm runtime files from /home/user/Downloads/malcolm_20190611_095410_ce2d8de.tar.gz (Y / n): y
Enter installation path for Malcolm [/home/user/Downloads/malcolm]: /home/user/Malcolm
Malcolm runtime files extracted to /home/user/Malcolm
Now that any necessary system configuration changes have been made, the local Malcolm instance will be configured:
1: docker
2: podman
Select container runtime engine (docker): 1
Malcolm processes will run as UID 1000 and GID 1000. Is this OK? (Y / n): y
Run with Malcolm (all containers) or Hedgehog (capture only) profile? (Y / n): y
Should Malcolm use and maintain its own OpenSearch instance? (Y / n): y
Compress local OpenSearch index snapshots? (y / N): n
Forward Logstash logs to a secondary remote document store? (y / N): n
Setting 10g for OpenSearch and 3g for Logstash. Is this OK? (Y / n): y
Setting 3 workers for Logstash pipelines. Is this OK? (Y / n): y
Restart Malcolm upon system or container daemon restart? (y / N): y
1: no
2: on-failure
3: always
4: unless-stopped
Select Malcolm restart behavior (unless-stopped): 4
Require encrypted HTTPS connections? (Y / n): y
Will Malcolm be running behind another reverse proxy (Traefik, Caddy, etc.)? (y / N): n
Specify external container network name (or leave blank for default networking) ():
1: Basic
2: Lightweight Directory Access Protocol (LDAP)
3: None
Select authentication method (Basic): 1
Store PCAP, log and index files in /home/user/Malcolm? (Y / n): y
Enable index management policies (ILM/ISM) in Arkime? (y / N): n
Should Malcolm delete the oldest database indices and capture artifacts based on available storage?? n
Automatically analyze all PCAP files with Suricata? (Y / n): y
Download updated Suricata signatures periodically? (y / N): y
Automatically analyze all PCAP files with Zeek? (Y / n): y
Is Malcolm being used to monitor an Operational Technology/Industrial Control Systems (OT/ICS) network? (y / N): n
Perform reverse DNS lookup locally for source and destination IP addresses in logs? (y / N): n
Perform hardware vendor OUI lookups for MAC addresses? (Y / n): y
Perform string randomness scoring on some fields? (Y / n): y
1: no
2: yes
3: customize
Should Malcolm accept logs and metrics from a Hedgehog Linux sensor or other forwarder? (no): 1
Enable file extraction with Zeek? (y / N): y
1: none
2: known
3: mapped
4: all
5: interesting
6: notcommtxt
Select file extraction behavior (none): 5
1: quarantined
2: all
3: none
Select file preservation behavior (quarantined): 1
Expose web interface for downloading preserved files? (y / N): y
ZIP downloaded preserved files? (y / N): y
Enter ZIP archive password for downloaded preserved files (or leave blank for unprotected): infected
Scan extracted files with ClamAV? (y / N): y
Scan extracted files with Yara? (y / N): y
Scan extracted PE files with Capa? (y / N): y
Lookup extracted file hashes with VirusTotal? (y / N): n
Download updated file scanner signatures periodically? (Y / n): n
Configure pulling from threat intelligence feeds for Zeek intelligence framework? (y / N): n
Should Malcolm run and maintain an instance of NetBox, an infrastructure resource modeling tool? (y / N): n
1: no
2: yes
3: customize
Should Malcolm capture live network traffic? 2
Specify capture interface(s) (comma-separated): eth0
Enable dark mode for OpenSearch Dashboards? (Y / n): y
Pull Malcolm images (y / N): y
Malcolm has been installed to /home/user/Malcolm. See README.md for more information.
Scripts for starting and stopping Malcolm and changing authentication-related settings can be found in /home/user/Malcolm/scripts.
At this point it is recommended to reboot the system so that the new system settings can be applied. After rebooting, log back in and return to the directory to which Malcolm was installed (or to which the git working copy was cloned).
The next step is to set up authentication and generate some unique self-signed TLS certificates. Users may choose another username instead of analyst
to log in to the Malcolm web interface.
user@host:~/Malcolm$ ./scripts/auth_setup
Store administrator username/password for local Malcolm access? (Y / n): y
Administrator username: analyst
analyst password:
analyst password (again):
Additional local accounts can be created at https://localhost/auth/ when Malcolm is running
(Re)generate self-signed certificates for HTTPS access (Y / n): y
(Re)generate self-signed certificates for a remote log forwarder (Y / n): y
Configure remote primary or secondary OpenSearch/Elasticsearch instance? (y / N): n
Store username/password for OpenSearch Alerting email sender account? (y / N): n
(Re)generate internal passwords for NetBox (Y / n): y
Users planning to install and configure sensor devices running Hedgehog Linux must perform an additional step to allow communication between a Malcolm instance and an installation of Hedgehog Linux. In order for a sensor running Hedgehog Linux to securely communicate with Malcolm, it needs a copy of the client certificates generated when "(Re)generate self-signed certificates for a remote log forwarder" was selected above. The certificate authority, certificate, and key files to be copied to and used by the remote log forwarder are located in Malcolm's filebeat/certs/
directory; these certificates should be copied to the /opt/sensor/sensor_ctl/logstash-client-certificates
directory on the Hedgehog Linux sensor.
As an alternative to manually copying the files to the sensor, Malcolm can facilitate the secure transfer of these certificates using croc
, an open-source tool for secure file transfer between two computers. Malcolm does not automatically download and install croc
, but it may be downloaded from its releases page on GitHub or installed from the command line. If croc
exists in the PATH
on the Malcolm system, the auth_setup
script will prompt to "Transfer self-signed client certificates to a remote log forwarder." Users can follow the steps outlined in the End-to-end Malcolm and Hedgehog Linux ISO Installation (see the Malcolm portion and the sensor portion of those instructions) to copy the certificates to the sensor.
In this example, rather than building Malcolm from scratch, images may be pulled from GitHub:
user@host:~/Malcolm$ docker compose --profile malcolm pull
Pulling api ... done
Pulling arkime ... done
Pulling dashboards ... done
Pulling dashboards-helper ... done
Pulling file-monitor ... done
Pulling filebeat ... done
Pulling freq ... done
Pulling htadmin ... done
Pulling logstash ... done
Pulling netbox ... done
Pulling netbox-postgresql ... done
Pulling netbox-redis ... done
Pulling nginx-proxy ... done
Pulling opensearch ... done
Pulling pcap-capture ... done
Pulling pcap-monitor ... done
Pulling suricata ... done
Pulling upload ... done
Pulling zeek ... done
user@host:~/Malcolm$ docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
ghcr.io/idaholab/malcolm/api {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 158MB
ghcr.io/idaholab/malcolm/arkime {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 816MB
ghcr.io/idaholab/malcolm/dashboards {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 1.02GB
ghcr.io/idaholab/malcolm/dashboards-helper {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 184MB
ghcr.io/idaholab/malcolm/file-monitor {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 588MB
ghcr.io/idaholab/malcolm/file-upload {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 259MB
ghcr.io/idaholab/malcolm/filebeat-oss {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 624MB
ghcr.io/idaholab/malcolm/freq {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 132MB
ghcr.io/idaholab/malcolm/htadmin {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 242MB
ghcr.io/idaholab/malcolm/logstash-oss {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 1.35GB
ghcr.io/idaholab/malcolm/netbox {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 1.01GB
ghcr.io/idaholab/malcolm/nginx-proxy {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 121MB
ghcr.io/idaholab/malcolm/opensearch {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 1.17GB
ghcr.io/idaholab/malcolm/pcap-capture {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 121MB
ghcr.io/idaholab/malcolm/pcap-monitor {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 213MB
ghcr.io/idaholab/malcolm/postgresql {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 268MB
ghcr.io/idaholab/malcolm/redis {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 34.2MB
ghcr.io/idaholab/malcolm/suricata {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 278MB
ghcr.io/idaholab/malcolm/zeek {{ site.malcolm.version }} xxxxxxxxxxxx 3 days ago 1GB
Finally, start Malcolm. When Malcolm starts it will stream informational and debug messages to the console until it has completed initializing.
user@host:~/Malcolm$ ./scripts/start
Malcolm services can be accessed at https://localhost/
------------------------------------------------------------------------------
NAME COMMAND SERVICE STATUS PORTS
malcolm-api-1 "/usr/local/bin/dock…" api running (starting) …
malcolm-arkime-1 "/usr/local/bin/dock…" arkime running (starting) …
malcolm-dashboards-1 "/usr/local/bin/dock…" dashboards running (starting) …
malcolm-dashboards-helper-1 "/usr/local/bin/dock…" dashboards-helper running (starting) …
malcolm-file-monitor-1 "/usr/local/bin/dock…" file-monitor running (starting) …
malcolm-filebeat-1 "/usr/local/bin/dock…" filebeat running (starting) …
malcolm-freq-1 "/usr/local/bin/dock…" freq running (starting) …
malcolm-htadmin-1 "/usr/local/bin/dock…" htadmin running (starting) …
malcolm-logstash-1 "/usr/local/bin/dock…" logstash running (starting) …
malcolm-netbox-1 "/usr/bin/tini -- /u…" netbox running (starting) …
malcolm-netbox-postgres-1 "/usr/bin/docker-uid…" netbox-postgres running (starting) …
malcolm-netbox-redis-1 "/sbin/tini -- /usr/…" netbox-redis running (starting) …
malcolm-netbox-redis-cache-1 "/sbin/tini -- /usr/…" netbox-redis-cache running (starting) …
malcolm-nginx-proxy-1 "/usr/local/bin/dock…" nginx-proxy running (starting) …
malcolm-opensearch-1 "/usr/local/bin/dock…" opensearch running (starting) …
malcolm-pcap-capture-1 "/usr/local/bin/dock…" pcap-capture running …
malcolm-pcap-monitor-1 "/usr/local/bin/dock…" pcap-monitor running (starting) …
malcolm-suricata-1 "/usr/local/bin/dock…" suricata running (starting) …
malcolm-suricata-live-1 "/usr/local/bin/dock…" suricata-live running …
malcolm-upload-1 "/usr/local/bin/dock…" upload running (starting) …
malcolm-zeek-1 "/usr/local/bin/dock…" zeek running (starting) …
malcolm-zeek-live-1 "/usr/local/bin/dock…" zeek-live running …
…
It will take several minutes for all of Malcolm's components to start up. Logstash will take the longest, probably 3 to 5 minutes. Users will know Logstash is fully ready when you see Logstash spit out a bunch of starting up messages, ending with this:
…
malcolm-logstash-1 | [2022-07-27T20:27:52,056][INFO ][logstash.agent ] Pipelines running {:count=>6, :running_pipelines=>[:"malcolm-input", :"malcolm-output", :"malcolm-beats", :"malcolm-suricata", :"malcolm-enrichment", :"malcolm-zeek"], :non_running_pipelines=>[]}
…
The Malcolm user interfaces may be accessed via a web browser.