diff --git a/target/linux/bcm53xx/base-files/etc/board.d/02_network b/target/linux/bcm53xx/base-files/etc/board.d/02_network index 822320c0a6a7f5..39425c767a747d 100644 --- a/target/linux/bcm53xx/base-files/etc/board.d/02_network +++ b/target/linux/bcm53xx/base-files/etc/board.d/02_network @@ -53,7 +53,7 @@ bcm53xx_setup_macs() etXmacaddr=$(nvram get et2macaddr) offset=1 ;; - luxul,xwr-3100v1 | \ + luxul,xwr-3100-v1 | \ luxul,xwr-3150-v1) etXmacaddr=$(nvram get et0macaddr) offset=5 diff --git a/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh b/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh index 62a36dac49d23a..ac64612aac7690 100644 --- a/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/bcm53xx/base-files/lib/upgrade/platform.sh @@ -39,18 +39,18 @@ platform_expected_image() { "dlink,dir-885l") echo "seamaseal wrgac42_dlink.2015_dir885l"; return;; "luxul,abr-4500-v1") echo "lxl ABR-4500"; return;; "luxul,xap-810-v1") echo "lxl XAP-810"; return;; - "luxul,xap-1410v1") echo "lxl XAP-1410"; return;; + "luxul,xap-1410-v1") echo "lxl XAP-1410"; return;; "luxul,xap-1440-v1") echo "lxl XAP-1440"; return;; - "luxul,xap-1510v1") echo "lxl XAP-1510"; return;; + "luxul,xap-1510-v1") echo "lxl XAP-1510"; return;; "luxul,xap-1610-v1") echo "lxl XAP-1610"; return;; "luxul,xbr-4500-v1") echo "lxl XBR-4500"; return;; "luxul,xwc-1000") echo "lxl XWC-1000"; return;; "luxul,xwc-2000-v1") echo "lxl XWC-2000"; return;; - "luxul,xwr-1200v1") echo "lxl XWR-1200"; return;; - "luxul,xwr-3100v1") echo "lxl XWR-3100"; return;; + "luxul,xwr-1200-v1") echo "lxl XWR-1200"; return;; + "luxul,xwr-3100-v1") echo "lxl XWR-3100"; return;; "luxul,xwr-3150-v1") echo "lxl XWR-3150"; return;; - "netgear,r6250v1") echo "chk U12H245T00_NETGEAR"; return;; - "netgear,r6300v2") echo "chk U12H240T00_NETGEAR"; return;; + "netgear,r6250-v1") echo "chk U12H245T00_NETGEAR"; return;; + "netgear,r6300-v2") echo "chk U12H240T00_NETGEAR"; return;; "netgear,r7000") echo "chk U12H270T00_NETGEAR"; return;; "netgear,r7900") echo "chk U12H315T30_NETGEAR"; return;; "netgear,r8000") echo "chk U12H315T00_NETGEAR"; return;; diff --git a/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch b/target/linux/bcm53xx/patches-5.10/038-v6.2-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch similarity index 98% rename from target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch rename to target/linux/bcm53xx/patches-5.10/038-v6.2-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch index c02c80065b116e..b7528e9f716b55 100644 --- a/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch +++ b/target/linux/bcm53xx/patches-5.10/038-v6.2-0001-ARM-dts-bcm53016-Add-devicetree-for-D-Link-DWL-8610A.patch @@ -21,7 +21,7 @@ Signed-off-by: Florian Fainelli --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ +@@ -132,6 +132,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47094-netgear-r8500.dtb \ bcm47094-phicomm-k3.dtb \ bcm53015-meraki-mr26.dtb \ diff --git a/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch b/target/linux/bcm53xx/patches-5.10/038-v6.2-0002-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch similarity index 100% rename from target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch rename to target/linux/bcm53xx/patches-5.10/038-v6.2-0002-ARM-dts-bcm47094-Add-devicetree-for-D-Link-DIR-890L.patch diff --git a/target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch b/target/linux/bcm53xx/patches-5.10/038-v6.2-0003-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch similarity index 100% rename from target/linux/bcm53xx/patches-5.10/038-v6.1-0001-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch rename to target/linux/bcm53xx/patches-5.10/038-v6.2-0003-ARM-dts-BCM5301X-Correct-description-of-TP-Link-part.patch diff --git a/target/linux/bcm53xx/patches-5.10/038-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch b/target/linux/bcm53xx/patches-5.10/038-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch new file mode 100644 index 00000000000000..d6bf49d0cd2127 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/038-v6.2-0004-ARM-dts-broadcom-align-LED-node-names-with-dtschema.patch @@ -0,0 +1,1700 @@ +From af84101e3f2258a303fa2461ebec0878ce23ea10 Mon Sep 17 00:00:00 2001 +From: Krzysztof Kozlowski +Date: Fri, 25 Nov 2022 15:41:27 +0100 +Subject: [PATCH] ARM: dts: broadcom: align LED node names with dtschema + +The node names should be generic and DT schema expects certain pattern: + + bcm4708-asus-rt-ac68u.dtb: leds: 'logo', 'power', 'usb2', 'usb3' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' + +Signed-off-by: Krzysztof Kozlowski +Link: https://lore.kernel.org/r/20221125144128.477059-1-krzysztof.kozlowski@linaro.org +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts | 15 +++++----- + arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts | 8 +++--- + .../bcm4708-buffalo-wzr-1166dhp-common.dtsi | 16 +++++------ + .../boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 16 +++++------ + arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 6 ++-- + arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 2 +- + arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 10 +++---- + .../arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 10 +++---- + arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 22 +++++++-------- + arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts | 10 +++---- + .../boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 14 +++++----- + .../boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 16 +++++------ + arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 6 ++-- + arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 20 ++++++------- + .../boot/dts/bcm47081-tplink-archer-c5-v2.dts | 18 ++++++------ + arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 6 ++-- + .../boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 18 ++++++------ + arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 16 +++++------ + arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 22 +++++++-------- + .../boot/dts/bcm4709-tplink-archer-c9-v1.dts | 18 ++++++------ + arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 12 ++++---- + arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 14 +++++----- + arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 16 +++++------ + .../boot/dts/bcm47094-linksys-panamera.dts | 28 +++++++++---------- + arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 4 +-- + arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 6 ++-- + arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 4 +-- + arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 2 +- + arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 20 ++++++------- + .../boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 10 +++---- + arch/arm/boot/dts/bcm47094-netgear-r8500.dts | 14 +++++----- + arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts | 4 +-- + arch/arm/boot/dts/bcm47189-luxul-xap-810.dts | 10 +++---- + arch/arm/boot/dts/bcm47189-tenda-ac9.dts | 14 +++++----- + .../boot/dts/bcm53016-dlink-dwl-8610ap.dts | 8 +++--- + arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 6 ++-- + arch/arm/boot/dts/bcm947189acdbmr.dts | 6 ++-- + 37 files changed, 223 insertions(+), 224 deletions(-) + +--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts ++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +@@ -28,40 +28,39 @@ + leds { + compatible = "gpio-leds"; + +- usb3 { ++ led-usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + +- wan { ++ led-wan { + label = "bcm53xx:blue:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + +- lan { ++ led-lan { + label = "bcm53xx:blue:lan"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + }; + +- power { ++ led-power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- all { ++ led-all { + label = "bcm53xx:blue:all"; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + +- +- usb2 { ++ led-usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; +--- a/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts ++++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts +@@ -28,24 +28,24 @@ + leds { + compatible = "gpio-leds"; + +- usb2 { ++ led-usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + +- power { ++ led-power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- logo { ++ led-logo { + label = "bcm53xx:white:logo"; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- usb3 { ++ led-usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; +--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi +@@ -37,7 +37,7 @@ + leds { + compatible = "gpio-leds"; + +- usb { ++ led-usb { + /* label = "bcm53xx:blue:usb"; */ + function = LED_FUNCTION_USB; + color = ; +@@ -48,14 +48,14 @@ + linux,default-trigger = "usbport"; + }; + +- power0 { ++ led-power0 { + /* label = "bcm53xx:red:power"; */ + function = LED_FUNCTION_FAULT; + color = ; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + }; + +- power1 { ++ led-power1 { + /* label = "bcm53xx:white:power"; */ + function = LED_FUNCTION_POWER; + color = ; +@@ -63,7 +63,7 @@ + linux,default-trigger = "default-on"; + }; + +- router0 { ++ led-router0 { + /* label = "bcm53xx:blue:router"; */ + function = LED_FUNCTION_STATUS; + color = ; +@@ -71,14 +71,14 @@ + linux,default-trigger = "default-on"; + }; + +- router1 { ++ led-router1 { + /* label = "bcm53xx:amber:router"; */ + function = LED_FUNCTION_STATUS; + color = ; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + }; + +- wan { ++ led-wan { + /* label = "bcm53xx:blue:wan"; */ + function = LED_FUNCTION_WAN; + color = ; +@@ -86,14 +86,14 @@ + linux,default-trigger = "default-on"; + }; + +- wireless0 { ++ led-wireless0 { + /* label = "bcm53xx:blue:wireless"; */ + function = LED_FUNCTION_WLAN; + color = ; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + }; + +- wireless1 { ++ led-wireless1 { + /* label = "bcm53xx:amber:wireless"; */ + function = LED_FUNCTION_WLAN; + color = ; +--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +@@ -49,7 +49,7 @@ + leds { + compatible = "gpio-leds"; + +- usb { ++ led-usb { + label = "bcm53xx:blue:usb"; + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, +@@ -58,40 +58,40 @@ + linux,default-trigger = "usbport"; + }; + +- power0 { ++ led-power0 { + label = "bcm53xx:red:power"; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + }; + +- power1 { ++ led-power1 { + label = "bcm53xx:white:power"; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + +- router0 { ++ led-router0 { + label = "bcm53xx:blue:router"; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + +- router1 { ++ led-router1 { + label = "bcm53xx:amber:router"; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + }; + +- wan { ++ led-wan { + label = "bcm53xx:blue:wan"; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + +- wireless0 { ++ led-wireless0 { + label = "bcm53xx:blue:wireless"; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + }; + +- wireless1 { ++ led-wireless1 { + label = "bcm53xx:amber:wireless"; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + }; +--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts ++++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +@@ -23,19 +23,19 @@ + leds { + compatible = "gpio-leds"; + +- 5ghz { ++ led-5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + +- status { ++ led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; +--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts ++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +@@ -42,7 +42,7 @@ + leds { + compatible = "gpio-leds"; + +- status { ++ led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; +--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +@@ -29,24 +29,24 @@ + leds { + compatible = "gpio-leds"; + +- logo { ++ led-logo { + label = "bcm53xx:white:logo"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + +- power0 { ++ led-power0 { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- power1 { ++ led-power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + +- usb { ++ led-usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, +@@ -54,7 +54,7 @@ + linux,default-trigger = "usbport"; + }; + +- wireless { ++ led-wireless { + label = "bcm53xx:blue:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; +--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +@@ -28,29 +28,29 @@ + leds { + compatible = "gpio-leds"; + +- logo { ++ led-logo { + label = "bcm53xx:white:logo"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + +- power0 { ++ led-power0 { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + }; + +- power1 { ++ led-power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- usb { ++ led-usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + }; + +- wireless { ++ led-wireless { + label = "bcm53xx:blue:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; +--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts ++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +@@ -28,64 +28,64 @@ + leds { + compatible = "gpio-leds"; + +- power-white { ++ led-power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + +- power-amber { ++ led-power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; + }; + +- usb2 { ++ led-usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + +- usb3-white { ++ led-usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + trigger-sources = <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + +- usb3-green { ++ led-usb3-green { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + +- wps { ++ led-wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + }; + +- status-red { ++ led-status-red { + label = "bcm53xx:red:status"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + }; + +- status-green { ++ led-status-green { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; + }; + +- status-blue { ++ led-status-blue { + label = "bcm53xx:blue:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; + }; + +- wan-white { ++ led-wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + +- wan-red { ++ led-wan-red { + label = "bcm53xx:red:wan"; + gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; + }; +--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts ++++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts +@@ -28,30 +28,30 @@ + leds { + compatible = "gpio-leds"; + +- power { ++ led-power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- usb2 { ++ led-usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + +- wan { ++ led-wan { + label = "bcm53xx:blue:wan"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- lan { ++ led-lan { + label = "bcm53xx:blue:lan"; + gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- usb3 { ++ led-usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; +--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts ++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +@@ -49,40 +49,40 @@ + leds { + compatible = "gpio-leds"; + +- power0 { ++ led-power0 { + label = "bcm53xx:green:power"; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + +- power1 { ++ led-power1 { + label = "bcm53xx:red:power"; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + }; + +- router0 { ++ led-router0 { + label = "bcm53xx:green:router"; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + +- router1 { ++ led-router1 { + label = "bcm53xx:amber:router"; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + }; + +- wan { ++ led-wan { + label = "bcm53xx:green:wan"; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + +- wireless0 { ++ led-wireless0 { + label = "bcm53xx:green:wireless"; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + }; + +- wireless1 { ++ led-wireless1 { + label = "bcm53xx:amber:wireless"; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + }; +--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts ++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +@@ -49,45 +49,45 @@ + leds { + compatible = "gpio-leds"; + +- usb { ++ led-usb { + label = "bcm53xx:green:usb"; + gpios = <&hc595 0 GPIO_ACTIVE_HIGH>; + }; + +- power0 { ++ led-power0 { + label = "bcm53xx:green:power"; + gpios = <&hc595 1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + +- power1 { ++ led-power1 { + label = "bcm53xx:red:power"; + gpios = <&hc595 2 GPIO_ACTIVE_HIGH>; + }; + +- router0 { ++ led-router0 { + label = "bcm53xx:green:router"; + gpios = <&hc595 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + +- router1 { ++ led-router1 { + label = "bcm53xx:amber:router"; + gpios = <&hc595 4 GPIO_ACTIVE_HIGH>; + }; + +- wan { ++ led-wan { + label = "bcm53xx:green:wan"; + gpios = <&hc595 5 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + +- wireless0 { ++ led-wireless0 { + label = "bcm53xx:green:wireless"; + gpios = <&hc595 6 GPIO_ACTIVE_HIGH>; + }; + +- wireless1 { ++ led-wireless1 { + label = "bcm53xx:amber:wireless"; + gpios = <&hc595 7 GPIO_ACTIVE_HIGH>; + }; +--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts ++++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +@@ -23,19 +23,19 @@ + leds { + compatible = "gpio-leds"; + +- 5ghz { ++ led-5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + +- status { ++ led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; +--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts ++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +@@ -29,62 +29,62 @@ + leds { + compatible = "gpio-leds"; + +- power { ++ led-power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- lan3 { ++ led-lan3 { + label = "bcm53xx:green:lan3"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + +- lan4 { ++ led-lan4 { + label = "bcm53xx:green:lan4"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + +- wan { ++ led-wan { + label = "bcm53xx:green:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + +- lan2 { ++ led-lan2 { + label = "bcm53xx:green:lan2"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + +- usb { ++ led-usb { + label = "bcm53xx:green:usb"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + +- status { ++ led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + +- 5ghz { ++ led-5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; + }; + +- lan1 { ++ led-lan1 { + label = "bcm53xx:green:lan1"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "none"; +--- a/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts ++++ b/arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts +@@ -23,50 +23,50 @@ + leds { + compatible = "gpio-leds"; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; + }; + +- lan { ++ led-lan { + label = "bcm53xx:green:lan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + }; + +- usb2-port1 { ++ led-usb2-port1 { + label = "bcm53xx:green:usb2-port1"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + +- power { ++ led-power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + +- wan-green { ++ led-wan-green { + label = "bcm53xx:green:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + +- wps { ++ led-wps { + label = "bcm53xx:green:wps"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + }; + +- wan-amber { ++ led-wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + }; + +- 5ghz { ++ led-5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + +- usb2-port2 { ++ led-usb2-port2 { + label = "bcm53xx:green:usb2-port2"; + gpios = <&chipcommon 13 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; +--- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts ++++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +@@ -28,18 +28,18 @@ + leds { + compatible = "gpio-leds"; + +- wps { ++ led-wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + +- power { ++ led-power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- wan { ++ led-wan { + label = "bcm53xx:red:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; +--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts ++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +@@ -28,48 +28,48 @@ + leds { + compatible = "gpio-leds"; + +- usb { ++ led-usb { + label = "bcm53xx:green:usb"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + }; + +- power-amber { ++ led-power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + +- power-white { ++ led-power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + +- router-amber { ++ led-router-amber { + label = "bcm53xx:amber:router"; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + }; + +- router-white { ++ led-router-white { + label = "bcm53xx:white:router"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + }; + +- wan-amber { ++ led-wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; + }; + +- wan-white { ++ led-wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; + }; + +- wireless-amber { ++ led-wireless-amber { + label = "bcm53xx:amber:wireless"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + }; + +- wireless-white { ++ led-wireless-white { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; +--- a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts +@@ -28,43 +28,43 @@ + leds { + compatible = "gpio-leds"; + +- power-white { ++ led-power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- power-amber { ++ led-power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + +- 5ghz { ++ led-5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + }; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + +- wps { ++ led-wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; + }; + +- wireless { ++ led-wireless { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + }; + +- usb3 { ++ led-usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + +- usb2 { ++ led-usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; +--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +@@ -39,59 +39,59 @@ + leds { + compatible = "gpio-leds"; + +- power-white { ++ led-power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- power-amber { ++ led-power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + +- wan-white { ++ led-wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- wan-amber { ++ led-wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>; + }; + +- 5ghz-1 { ++ led-5ghz-1 { + label = "bcm53xx:white:5ghz-1"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + }; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + +- wireless { ++ led-wireless { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; + }; + +- wps { ++ led-wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + }; + +- 5ghz-2 { ++ led-5ghz-2 { + label = "bcm53xx:white:5ghz-2"; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + }; + +- usb3 { ++ led-usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + +- usb2 { ++ led-usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; +--- a/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts ++++ b/arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +@@ -23,27 +23,27 @@ + leds { + compatible = "gpio-leds"; + +- lan { ++ led-lan { + label = "bcm53xx:blue:lan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + }; + +- wps { ++ led-wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 2 GPIO_ACTIVE_HIGH>; + }; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + }; + +- 5ghz { ++ led-5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + +- usb3 { ++ led-usb3 { + label = "bcm53xx:blue:usb3"; + gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, +@@ -51,24 +51,24 @@ + linux,default-trigger = "usbport"; + }; + +- usb2 { ++ led-usb2 { + label = "bcm53xx:blue:usb2"; + gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + +- wan-blue { ++ led-wan-blue { + label = "bcm53xx:blue:wan"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; + }; + +- wan-amber { ++ led-wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + }; + +- power { ++ led-power { + label = "bcm53xx:blue:power"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; +--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts ++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +@@ -33,37 +33,37 @@ + leds { + compatible = "gpio-leds"; + +- power { ++ led-power { + label = "white:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- wan-red { ++ led-wan-red { + label = "red:wan"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + +- lan { ++ led-lan { + label = "white:lan"; + gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>; + }; + +- usb2 { ++ led-usb2 { + label = "white:usb2"; + gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + +- usb3 { ++ led-usb3 { + label = "white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + trigger-sources = <&ehci_port1>, <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + +- wps { ++ led-wps { + label = "white:wps"; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + }; +--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +@@ -43,28 +43,28 @@ + leds { + compatible = "gpio-leds"; + +- power-white { ++ led-power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- wan-white { ++ led-wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + +- power-amber { ++ led-power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + }; + +- wan-amber { ++ led-wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + +- usb3-white { ++ led-usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, +@@ -72,12 +72,12 @@ + linux,default-trigger = "usbport"; + }; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + +- 5ghz { ++ led-5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; +--- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts +@@ -41,47 +41,47 @@ + */ + compatible = "gpio-leds"; + +- power-white { ++ led-power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- wan-white { ++ led-wan-white { + label = "bcm53xx:white:wan"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + +- power-amber { ++ led-power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + }; + +- wan-amber { ++ led-wan-amber { + label = "bcm53xx:amber:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + +- usb3-white { ++ led-usb3-white { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&xhci_port1>; + linux,default-trigger = "usbport"; + }; + +- usb2-white { ++ led-usb2-white { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + +- 5ghz { ++ led-5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; +--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts ++++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +@@ -52,19 +52,19 @@ + leds { + compatible = "gpio-leds"; + +- wps { ++ led-wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>; + }; + +- usb2 { ++ led-usb2 { + label = "bcm53xx:green:usb2"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port2>, <&ehci_port2>; + linux,default-trigger = "usbport"; + }; + +- usb3 { ++ led-usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, +@@ -72,58 +72,58 @@ + linux,default-trigger = "usbport"; + }; + +- power { ++ led-power { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + +- wifi-disabled { ++ led-wifi-disabled { + label = "bcm53xx:amber:wifi-disabled"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + }; + +- wifi-enabled { ++ led-wifi-enabled { + label = "bcm53xx:white:wifi-enabled"; + gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>; + }; + +- bluebar1 { ++ led-bluebar1 { + label = "bcm53xx:white:bluebar1"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + }; + +- bluebar2 { ++ led-bluebar2 { + label = "bcm53xx:white:bluebar2"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; + +- bluebar3 { ++ led-bluebar3 { + label = "bcm53xx:white:bluebar3"; + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>; + }; + +- bluebar4 { ++ led-bluebar4 { + label = "bcm53xx:white:bluebar4"; + gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>; + }; + +- bluebar5 { ++ led-bluebar5 { + label = "bcm53xx:white:bluebar5"; + gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; + }; + +- bluebar6 { ++ led-bluebar6 { + label = "bcm53xx:white:bluebar6"; + gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; + }; + +- bluebar7 { ++ led-bluebar7 { + label = "bcm53xx:white:bluebar7"; + gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>; + }; + +- bluebar8 { ++ led-bluebar8 { + label = "bcm53xx:white:bluebar8"; + gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +@@ -30,13 +30,13 @@ + leds { + compatible = "gpio-leds"; + +- status { ++ led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + +- usb3 { ++ led-usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, +--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts +@@ -23,18 +23,18 @@ + leds { + compatible = "gpio-leds"; + +- status { ++ led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + +- 5ghz { ++ led-5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +@@ -30,13 +30,13 @@ + leds { + compatible = "gpio-leds"; + +- status { ++ led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + +- usb3 { ++ led-usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, +--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +@@ -25,7 +25,7 @@ + leds { + compatible = "gpio-leds"; + +- status { ++ led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +@@ -30,38 +30,38 @@ + leds { + compatible = "gpio-leds"; + +- power { ++ led-power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- lan3 { ++ led-lan3 { + label = "bcm53xx:green:lan3"; + gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>; + }; + +- lan4 { ++ led-lan4 { + label = "bcm53xx:green:lan4"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + }; + +- wan { ++ led-wan { + label = "bcm53xx:green:wan"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + +- lan1 { ++ led-lan1 { + label = "bcm53xx:green:lan1"; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + +- lan2 { ++ led-lan2 { + label = "bcm53xx:green:lan2"; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + +- usb3 { ++ led-usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, +@@ -69,18 +69,18 @@ + linux,default-trigger = "usbport"; + }; + +- status { ++ led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + +- 5ghz { ++ led-5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +@@ -33,13 +33,13 @@ + leds { + compatible = "gpio-leds"; + +- power { ++ led-power { + label = "bcm53xx:green:power"; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- usb3 { ++ led-usb3 { + label = "bcm53xx:green:usb3"; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; + trigger-sources = <&ohci_port1>, <&ehci_port1>, +@@ -47,18 +47,18 @@ + linux,default-trigger = "usbport"; + }; + +- status { ++ led-status { + label = "bcm53xx:green:status"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; + }; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:green:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + +- 5ghz { ++ led-5ghz { + label = "bcm53xx:green:5ghz"; + gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>; + }; +--- a/arch/arm/boot/dts/bcm47094-netgear-r8500.dts ++++ b/arch/arm/boot/dts/bcm47094-netgear-r8500.dts +@@ -25,38 +25,38 @@ + leds { + compatible = "gpio-leds"; + +- power0 { ++ led-power0 { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + +- power1 { ++ led-power1 { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + }; + +- 5ghz-1 { ++ led-5ghz-1 { + label = "bcm53xx:white:5ghz-1"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + }; + +- 5ghz-2 { ++ led-5ghz-2 { + label = "bcm53xx:white:5ghz-2"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + }; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + }; + +- usb2 { ++ led-usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + }; + +- usb3 { ++ led-usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + }; +--- a/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts ++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-1440.dts +@@ -23,13 +23,13 @@ + leds { + compatible = "gpio-leds"; + +- wlan { ++ led-wlan { + label = "bcm53xx:blue:wlan"; + gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + +- system { ++ led-system { + label = "bcm53xx:green:system"; + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "timer"; +--- a/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts ++++ b/arch/arm/boot/dts/bcm47189-luxul-xap-810.dts +@@ -20,26 +20,26 @@ + reg = <0x00000000 0x08000000>; + }; + +- leds { ++ leds-0 { + compatible = "gpio-leds"; + +- 5ghz { ++ led-5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + +- system { ++ led-system { + label = "bcm53xx:green:system"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + }; + +- pcie0_leds { ++ leds-1 { + compatible = "gpio-leds"; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; +--- a/arch/arm/boot/dts/bcm47189-tenda-ac9.dts ++++ b/arch/arm/boot/dts/bcm47189-tenda-ac9.dts +@@ -20,37 +20,37 @@ + reg = <0x00000000 0x08000000>; + }; + +- leds { ++ leds-0 { + compatible = "gpio-leds"; + +- usb { ++ led-usb { + label = "bcm53xx:blue:usb"; + gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>; + trigger-sources = <&ohci_port1>, <&ehci_port1>; + linux,default-trigger = "usbport"; + }; + +- wps { ++ led-wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; + }; + +- 5ghz { ++ led-5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + }; + +- system { ++ led-system { + label = "bcm53xx:blue:system"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + }; + }; + +- pcie0_leds { ++ leds-1 { + compatible = "gpio-leds"; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; + }; +--- a/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts ++++ b/arch/arm/boot/dts/bcm53016-dlink-dwl-8610ap.dts +@@ -20,14 +20,14 @@ + leds { + compatible = "gpio-leds"; + +- power { ++ led-power { + function = LED_FUNCTION_POWER; + color = ; + gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + +- diag { ++ led-diag { + /* Actually "diag" unclear what this means */ + function = LED_FUNCTION_INDICATOR; + color = ; +@@ -36,13 +36,13 @@ + linux,default-trigger = "heartbeat"; + }; + +- wlan-2g { ++ led-wlan-2g { + function = LED_FUNCTION_WLAN; + color = ; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + +- wlan-5g { ++ led-wlan-5g { + function = LED_FUNCTION_WLAN; + color = ; + gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>; +--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts ++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +@@ -58,7 +58,7 @@ + pwm-leds { + compatible = "pwm-leds"; + +- red { ++ led-0 { + /* SYS-LED 1 - Tricolor */ + function = LED_FUNCTION_INDICATOR; + color = ; +@@ -66,7 +66,7 @@ + max-brightness = <255>; + }; + +- green { ++ led-1 { + /* SYS-LED 1 - Tricolor */ + function = LED_FUNCTION_POWER; + color = ; +@@ -74,7 +74,7 @@ + max-brightness = <255>; + }; + +- blue { ++ led-2 { + /* SYS-LED 1 - Tricolor */ + function = LED_FUNCTION_INDICATOR; + color = ; +--- a/arch/arm/boot/dts/bcm947189acdbmr.dts ++++ b/arch/arm/boot/dts/bcm947189acdbmr.dts +@@ -25,17 +25,17 @@ + leds { + compatible = "gpio-leds"; + +- wps { ++ led-wps { + label = "bcm53xx:blue:wps"; + gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>; + }; + +- 5ghz { ++ led-5ghz { + label = "bcm53xx:blue:5ghz"; + gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; + }; + +- 2ghz { ++ led-2ghz { + label = "bcm53xx:blue:2ghz"; + gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>; + }; diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch new file mode 100644 index 00000000000000..be3f89eaf8c412 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0001-ARM-dts-BCM5301X-Relicense-Rafa-s-code-to-the-GPL-2..patch @@ -0,0 +1,487 @@ +From 915fac07f053418d0ab9075af64da2872ca8a7f8 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 3 May 2023 14:16:10 +0200 +Subject: [PATCH] =?UTF-8?q?ARM:=20dts:=20BCM5301X:=20Relicense=20Rafa?= + =?UTF-8?q?=C5=82's=20code=20to=20the=20GPL=202.0+=20/=20MIT?= +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +All BCM5301X device DTS files use dual licensing. Try the same for SoC. +Introduce a new .dtsi file with a proper SPDX tag. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20230503121611.1629-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + MAINTAINERS | 1 + + arch/arm/boot/dts/bcm-ns.dtsi | 202 ++++++++++++++++++++++++++++++++ + arch/arm/boot/dts/bcm5301x.dtsi | 192 +----------------------------- + 3 files changed, 205 insertions(+), 190 deletions(-) + create mode 100644 arch/arm/boot/dts/bcm-ns.dtsi + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -3433,6 +3433,7 @@ M: Rafał Miłecki + M: bcm-kernel-feedback-list@broadcom.com + L: linux-arm-kernel@lists.infradead.org + S: Maintained ++F: arch/arm/boot/dts/bcm-ns.dtsi + F: arch/arm/boot/dts/bcm470* + F: arch/arm/boot/dts/bcm5301* + F: arch/arm/boot/dts/bcm953012* +--- /dev/null ++++ b/arch/arm/boot/dts/bcm-ns.dtsi +@@ -0,0 +1,202 @@ ++// SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++ ++#include ++#include ++#include ++#include ++#include ++ ++/ { ++ axi@18000000 { ++ compatible = "brcm,bus-axi"; ++ reg = <0x18000000 0x1000>; ++ ranges = <0x00000000 0x18000000 0x00100000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ chipcommon: chipcommon@0 { ++ reg = <0x00000000 0x1000>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ pcie0: pcie@12000 { ++ reg = <0x00012000 0x1000>; ++ }; ++ ++ pcie1: pcie@13000 { ++ reg = <0x00013000 0x1000>; ++ }; ++ ++ usb2: usb2@21000 { ++ reg = <0x00021000 0x1000>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ++ interrupt-parent = <&gic>; ++ ++ ehci: usb@21000 { ++ #usb-cells = <0>; ++ ++ compatible = "generic-ehci"; ++ reg = <0x00021000 0x1000>; ++ interrupts = ; ++ phys = <&usb2_phy>; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ehci_port1: port@1 { ++ reg = <1>; ++ #trigger-source-cells = <0>; ++ }; ++ ++ ehci_port2: port@2 { ++ reg = <2>; ++ #trigger-source-cells = <0>; ++ }; ++ }; ++ ++ ohci: usb@22000 { ++ #usb-cells = <0>; ++ ++ compatible = "generic-ohci"; ++ reg = <0x00022000 0x1000>; ++ interrupts = ; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ohci_port1: port@1 { ++ reg = <1>; ++ #trigger-source-cells = <0>; ++ }; ++ ++ ohci_port2: port@2 { ++ reg = <2>; ++ #trigger-source-cells = <0>; ++ }; ++ }; ++ }; ++ ++ usb3: usb3@23000 { ++ reg = <0x00023000 0x1000>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ ++ interrupt-parent = <&gic>; ++ ++ xhci: usb@23000 { ++ #usb-cells = <0>; ++ ++ compatible = "generic-xhci"; ++ reg = <0x00023000 0x1000>; ++ interrupts = ; ++ phys = <&usb3_phy>; ++ phy-names = "usb"; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ xhci_port1: port@1 { ++ reg = <1>; ++ #trigger-source-cells = <0>; ++ }; ++ }; ++ }; ++ }; ++ ++ mdio: mdio@18003000 { ++ compatible = "brcm,iproc-mdio"; ++ reg = <0x18003000 0x8>; ++ #size-cells = <0>; ++ #address-cells = <1>; ++ }; ++ ++ dmu-bus@1800c000 { ++ compatible = "simple-bus"; ++ ranges = <0 0x1800c000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ cru-bus@100 { ++ compatible = "brcm,ns-cru", "simple-mfd"; ++ reg = <0x100 0x1a4>; ++ ranges; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ usb2_phy: phy@164 { ++ compatible = "brcm,ns-usb2-phy"; ++ reg = <0x164 0x4>; ++ brcm,syscon-clkset = <&cru_clkset>; ++ clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; ++ clock-names = "phy-ref-clk"; ++ #phy-cells = <0>; ++ }; ++ ++ cru_clkset: syscon@180 { ++ compatible = "brcm,cru-clkset", "syscon"; ++ reg = <0x180 0x4>; ++ }; ++ ++ pinctrl: pinctrl@1c0 { ++ compatible = "brcm,bcm4708-pinmux"; ++ reg = <0x1c0 0x24>; ++ reg-names = "cru_gpio_control"; ++ ++ spi-pins { ++ groups = "spi_grp"; ++ function = "spi"; ++ }; ++ ++ pinmux_i2c: i2c-pins { ++ groups = "i2c_grp"; ++ function = "i2c"; ++ }; ++ ++ pinmux_pwm: pwm-pins { ++ groups = "pwm0_grp", "pwm1_grp", ++ "pwm2_grp", "pwm3_grp"; ++ function = "pwm"; ++ }; ++ ++ pinmux_uart1: uart1-pins { ++ groups = "uart1_grp"; ++ function = "uart1"; ++ }; ++ }; ++ ++ thermal: thermal@2c0 { ++ compatible = "brcm,ns-thermal"; ++ reg = <0x2c0 0x10>; ++ #thermal-sensor-cells = <0>; ++ }; ++ }; ++ }; ++ ++ thermal-zones { ++ cpu_thermal: cpu-thermal { ++ polling-delay-passive = <0>; ++ polling-delay = <1000>; ++ coefficients = <(-556) 418000>; ++ thermal-sensors = <&thermal>; ++ ++ trips { ++ cpu-crit { ++ temperature = <125000>; ++ hysteresis = <0>; ++ type = "critical"; ++ }; ++ }; ++ ++ cooling-maps { ++ }; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -8,11 +8,7 @@ + * Licensed under the GNU/GPL. See COPYING for details. + */ + +-#include +-#include +-#include +-#include +-#include ++#include "bcm-ns.dtsi" + + / { + #address-cells = <1>; +@@ -149,12 +145,6 @@ + }; + + axi@18000000 { +- compatible = "brcm,bus-axi"; +- reg = <0x18000000 0x1000>; +- ranges = <0x00000000 0x18000000 0x00100000>; +- #address-cells = <1>; +- #size-cells = <1>; +- + #interrupt-cells = <1>; + interrupt-map-mask = <0x000fffff 0xffff>; + interrupt-map = +@@ -228,108 +218,15 @@ + <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + +- chipcommon: chipcommon@0 { +- reg = <0x00000000 0x1000>; +- +- gpio-controller; +- #gpio-cells = <2>; ++ chipcommon@0 { + interrupt-controller; + #interrupt-cells = <2>; + }; + +- pcie0: pcie@12000 { +- reg = <0x00012000 0x1000>; +- }; +- +- pcie1: pcie@13000 { +- reg = <0x00013000 0x1000>; +- }; +- + pcie2: pcie@14000 { + reg = <0x00014000 0x1000>; + }; + +- usb2: usb2@21000 { +- reg = <0x00021000 0x1000>; +- +- #address-cells = <1>; +- #size-cells = <1>; +- ranges; +- +- interrupt-parent = <&gic>; +- +- ehci: usb@21000 { +- #usb-cells = <0>; +- +- compatible = "generic-ehci"; +- reg = <0x00021000 0x1000>; +- interrupts = ; +- phys = <&usb2_phy>; +- +- #address-cells = <1>; +- #size-cells = <0>; +- +- ehci_port1: port@1 { +- reg = <1>; +- #trigger-source-cells = <0>; +- }; +- +- ehci_port2: port@2 { +- reg = <2>; +- #trigger-source-cells = <0>; +- }; +- }; +- +- ohci: usb@22000 { +- #usb-cells = <0>; +- +- compatible = "generic-ohci"; +- reg = <0x00022000 0x1000>; +- interrupts = ; +- +- #address-cells = <1>; +- #size-cells = <0>; +- +- ohci_port1: port@1 { +- reg = <1>; +- #trigger-source-cells = <0>; +- }; +- +- ohci_port2: port@2 { +- reg = <2>; +- #trigger-source-cells = <0>; +- }; +- }; +- }; +- +- usb3: usb3@23000 { +- reg = <0x00023000 0x1000>; +- +- #address-cells = <1>; +- #size-cells = <1>; +- ranges; +- +- interrupt-parent = <&gic>; +- +- xhci: usb@23000 { +- #usb-cells = <0>; +- +- compatible = "generic-xhci"; +- reg = <0x00023000 0x1000>; +- interrupts = ; +- phys = <&usb3_phy>; +- phy-names = "usb"; +- +- #address-cells = <1>; +- #size-cells = <0>; +- +- xhci_port1: port@1 { +- reg = <1>; +- #trigger-source-cells = <0>; +- }; +- }; +- }; +- + gmac0: ethernet@24000 { + reg = <0x24000 0x800>; + }; +@@ -355,13 +252,6 @@ + status = "disabled"; + }; + +- mdio: mdio@18003000 { +- compatible = "brcm,iproc-mdio"; +- reg = <0x18003000 0x8>; +- #size-cells = <0>; +- #address-cells = <1>; +- }; +- + mdio-mux@18003000 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio>; +@@ -409,18 +299,7 @@ + }; + + dmu-bus@1800c000 { +- compatible = "simple-bus"; +- ranges = <0 0x1800c000 0x1000>; +- #address-cells = <1>; +- #size-cells = <1>; +- + cru-bus@100 { +- compatible = "brcm,ns-cru", "simple-mfd"; +- reg = <0x100 0x1a4>; +- ranges; +- #address-cells = <1>; +- #size-cells = <1>; +- + lcpll0: clock-controller@100 { + #clock-cells = <1>; + compatible = "brcm,nsp-lcpll0"; +@@ -440,53 +319,6 @@ + "usbclk", "iprocfast", + "sata1", "sata2"; + }; +- +- usb2_phy: phy@164 { +- compatible = "brcm,ns-usb2-phy"; +- reg = <0x164 0x4>; +- brcm,syscon-clkset = <&cru_clkset>; +- clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; +- clock-names = "phy-ref-clk"; +- #phy-cells = <0>; +- }; +- +- cru_clkset: syscon@180 { +- compatible = "brcm,cru-clkset", "syscon"; +- reg = <0x180 0x4>; +- }; +- +- pinctrl: pinctrl@1c0 { +- compatible = "brcm,bcm4708-pinmux"; +- reg = <0x1c0 0x24>; +- reg-names = "cru_gpio_control"; +- +- spi-pins { +- groups = "spi_grp"; +- function = "spi"; +- }; +- +- pinmux_i2c: i2c-pins { +- groups = "i2c_grp"; +- function = "i2c"; +- }; +- +- pinmux_pwm: pwm-pins { +- groups = "pwm0_grp", "pwm1_grp", +- "pwm2_grp", "pwm3_grp"; +- function = "pwm"; +- }; +- +- pinmux_uart1: uart1-pins { +- groups = "uart1_grp"; +- function = "uart1"; +- }; +- }; +- +- thermal: thermal@2c0 { +- compatible = "brcm,ns-thermal"; +- reg = <0x2c0 0x10>; +- #thermal-sensor-cells = <0>; +- }; + }; + }; + +@@ -558,24 +390,4 @@ + }; + }; + }; +- +- thermal-zones { +- cpu_thermal: cpu-thermal { +- polling-delay-passive = <0>; +- polling-delay = <1000>; +- coefficients = <(-556) 418000>; +- thermal-sensors = <&thermal>; +- +- trips { +- cpu-crit { +- temperature = <125000>; +- hysteresis = <0>; +- type = "critical"; +- }; +- }; +- +- cooling-maps { +- }; +- }; +- }; + }; diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0002-ARM-dts-BCM5301X-Relicense-Florian-s-code-to-the-GPL.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0002-ARM-dts-BCM5301X-Relicense-Florian-s-code-to-the-GPL.patch new file mode 100644 index 00000000000000..b98f2daa6764e7 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0002-ARM-dts-BCM5301X-Relicense-Florian-s-code-to-the-GPL.patch @@ -0,0 +1,136 @@ +From 916553449561c4f0b61c71b751b7bb583f5dddd4 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 3 May 2023 14:16:11 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Relicense Florian's code to the GPL 2.0+ + / MIT +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +All BCM5301X device DTS files use dual licensing. Try the same for SoC. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20230503121611.1629-2-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm-ns.dtsi | 36 ++++++++++++++++++++++++++++++ + arch/arm/boot/dts/bcm5301x.dtsi | 39 --------------------------------- + 2 files changed, 36 insertions(+), 39 deletions(-) + +--- a/arch/arm/boot/dts/bcm-ns.dtsi ++++ b/arch/arm/boot/dts/bcm-ns.dtsi +@@ -19,6 +19,8 @@ + + gpio-controller; + #gpio-cells = <2>; ++ interrupt-controller; ++ #interrupt-cells = <2>; + }; + + pcie0: pcie@12000 { +@@ -109,6 +111,22 @@ + }; + }; + }; ++ ++ gmac0: ethernet@24000 { ++ reg = <0x24000 0x800>; ++ }; ++ ++ gmac1: ethernet@25000 { ++ reg = <0x25000 0x800>; ++ }; ++ ++ gmac2: ethernet@26000 { ++ reg = <0x26000 0x800>; ++ }; ++ ++ gmac3: ethernet@27000 { ++ reg = <0x27000 0x800>; ++ }; + }; + + mdio: mdio@18003000 { +@@ -118,6 +136,24 @@ + #address-cells = <1>; + }; + ++ rng: rng@18004000 { ++ compatible = "brcm,bcm5301x-rng"; ++ reg = <0x18004000 0x14>; ++ }; ++ ++ srab: ethernet-switch@18007000 { ++ compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab"; ++ reg = <0x18007000 0x1000>; ++ ++ status = "disabled"; ++ ++ /* ports are defined in board DTS */ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ }; ++ }; ++ + dmu-bus@1800c000 { + compatible = "simple-bus"; + ranges = <0 0x1800c000 0x1000>; +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -218,30 +218,9 @@ + <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, + <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + +- chipcommon@0 { +- interrupt-controller; +- #interrupt-cells = <2>; +- }; +- + pcie2: pcie@14000 { + reg = <0x00014000 0x1000>; + }; +- +- gmac0: ethernet@24000 { +- reg = <0x24000 0x800>; +- }; +- +- gmac1: ethernet@25000 { +- reg = <0x25000 0x800>; +- }; +- +- gmac2: ethernet@26000 { +- reg = <0x26000 0x800>; +- }; +- +- gmac3: ethernet@27000 { +- reg = <0x27000 0x800>; +- }; + }; + + pwm: pwm@18002000 { +@@ -322,24 +301,6 @@ + }; + }; + +- srab: ethernet-switch@18007000 { +- compatible = "brcm,bcm53011-srab", "brcm,bcm5301x-srab"; +- reg = <0x18007000 0x1000>; +- +- status = "disabled"; +- +- /* ports are defined in board DTS */ +- ports { +- #address-cells = <1>; +- #size-cells = <0>; +- }; +- }; +- +- rng: rng@18004000 { +- compatible = "brcm,bcm5301x-rng"; +- reg = <0x18004000 0x14>; +- }; +- + nand_controller: nand-controller@18028000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; + reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch new file mode 100644 index 00000000000000..4065db8366af15 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch @@ -0,0 +1,32 @@ +From d3c8e2c5757153bbfad70019ec1decbca86f3def Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 3 May 2023 14:28:30 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Drop "clock-names" from the SPI node +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +There is no such property in the SPI controller binding documentation. +Also Linux driver doesn't look for it. + +This fixes: +arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: spi@18029200: Unevaluated properties are not allowed ('clock-names' was unexpected) + From schema: Documentation/devicetree/bindings/spi/brcm,spi-bcm-qspi.yaml + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20230503122830.3200-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm5301x.dtsi | 1 - + 1 file changed, 1 deletion(-) + +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -335,7 +335,6 @@ + "spi_lr_session_done", + "spi_lr_overread"; + clocks = <&iprocmed>; +- clock-names = "iprocmed"; + num-cs = <2>; + #address-cells = <1>; + #size-cells = <0>; diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0004-ARM-dts-BCM5301X-Relicense-Hauke-s-code-to-the-GPL-2.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0004-ARM-dts-BCM5301X-Relicense-Hauke-s-code-to-the-GPL-2.patch new file mode 100644 index 00000000000000..328748c8e0f739 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0004-ARM-dts-BCM5301X-Relicense-Hauke-s-code-to-the-GPL-2.patch @@ -0,0 +1,249 @@ +From b3b3cd885ed39cb4b38319a1c4fa4e41db6fee72 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 15 May 2023 17:19:20 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Relicense Hauke's code to the GPL 2.0+ / + MIT +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Move code added by Hauke to the bcm-ns.dtsi which uses dual licensing. +That syncs more Northstar code to be based on the same licensing schema. + +Signed-off-by: Rafał Miłecki +Cc: Hauke Mehrtens +Acked-by: Hauke Mehrtens +Link: https://lore.kernel.org/r/20230515151921.25021-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm-ns.dtsi | 90 +++++++++++++++++++++++++++++++++ + arch/arm/boot/dts/bcm5301x.dtsi | 85 ------------------------------- + 2 files changed, 90 insertions(+), 85 deletions(-) + +--- a/arch/arm/boot/dts/bcm-ns.dtsi ++++ b/arch/arm/boot/dts/bcm-ns.dtsi +@@ -1,4 +1,7 @@ + // SPDX-License-Identifier: GPL-2.0-or-later OR MIT ++/* ++ * Copyright 2013-2014 Hauke Mehrtens ++ */ + + #include + #include +@@ -7,6 +10,81 @@ + #include + + / { ++ interrupt-parent = <&gic>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ chipcommon-a-bus@18000000 { ++ compatible = "simple-bus"; ++ ranges = <0x00000000 0x18000000 0x00001000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ uart0: serial@300 { ++ compatible = "ns16550"; ++ reg = <0x0300 0x100>; ++ interrupts = ; ++ clocks = <&iprocslow>; ++ status = "disabled"; ++ }; ++ ++ uart1: serial@400 { ++ compatible = "ns16550"; ++ reg = <0x0400 0x100>; ++ interrupts = ; ++ clocks = <&iprocslow>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&pinmux_uart1>; ++ status = "disabled"; ++ }; ++ }; ++ ++ mpcore-bus@19000000 { ++ compatible = "simple-bus"; ++ ranges = <0x00000000 0x19000000 0x00023000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ scu@20000 { ++ compatible = "arm,cortex-a9-scu"; ++ reg = <0x20000 0x100>; ++ }; ++ ++ timer@20200 { ++ compatible = "arm,cortex-a9-global-timer"; ++ reg = <0x20200 0x100>; ++ interrupts = ; ++ clocks = <&periph_clk>; ++ }; ++ ++ timer@20600 { ++ compatible = "arm,cortex-a9-twd-timer"; ++ reg = <0x20600 0x20>; ++ interrupts = ; ++ clocks = <&periph_clk>; ++ }; ++ ++ gic: interrupt-controller@21000 { ++ compatible = "arm,cortex-a9-gic"; ++ #interrupt-cells = <3>; ++ #address-cells = <0>; ++ interrupt-controller; ++ reg = <0x21000 0x1000>, ++ <0x20100 0x100>; ++ }; ++ ++ L2: cache-controller@22000 { ++ compatible = "arm,pl310-cache"; ++ reg = <0x22000 0x1000>; ++ cache-unified; ++ arm,shared-override; ++ prefetch-data = <1>; ++ prefetch-instr = <1>; ++ cache-level = <2>; ++ }; ++ }; ++ + axi@18000000 { + compatible = "brcm,bus-axi"; + reg = <0x18000000 0x1000>; +@@ -216,6 +294,18 @@ + }; + }; + ++ nand_controller: nand-controller@18028000 { ++ compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; ++ reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; ++ reg-names = "nand", "iproc-idm", "iproc-ext"; ++ interrupts = ; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ brcm,nand-has-wp; ++ }; ++ + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <0>; +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -11,41 +11,7 @@ + #include "bcm-ns.dtsi" + + / { +- #address-cells = <1>; +- #size-cells = <1>; +- interrupt-parent = <&gic>; +- +- chipcommon-a-bus@18000000 { +- compatible = "simple-bus"; +- ranges = <0x00000000 0x18000000 0x00001000>; +- #address-cells = <1>; +- #size-cells = <1>; +- +- uart0: serial@300 { +- compatible = "ns16550"; +- reg = <0x0300 0x100>; +- interrupts = ; +- clocks = <&iprocslow>; +- status = "disabled"; +- }; +- +- uart1: serial@400 { +- compatible = "ns16550"; +- reg = <0x0400 0x100>; +- interrupts = ; +- clocks = <&iprocslow>; +- pinctrl-names = "default"; +- pinctrl-0 = <&pinmux_uart1>; +- status = "disabled"; +- }; +- }; +- + mpcore-bus@19000000 { +- compatible = "simple-bus"; +- ranges = <0x00000000 0x19000000 0x00023000>; +- #address-cells = <1>; +- #size-cells = <1>; +- + a9pll: arm_clk@0 { + #clock-cells = <0>; + compatible = "brcm,nsp-armpll"; +@@ -53,26 +19,6 @@ + reg = <0x00000 0x1000>; + }; + +- scu@20000 { +- compatible = "arm,cortex-a9-scu"; +- reg = <0x20000 0x100>; +- }; +- +- timer@20200 { +- compatible = "arm,cortex-a9-global-timer"; +- reg = <0x20200 0x100>; +- interrupts = ; +- clocks = <&periph_clk>; +- }; +- +- timer@20600 { +- compatible = "arm,cortex-a9-twd-timer"; +- reg = <0x20600 0x20>; +- interrupts = ; +- clocks = <&periph_clk>; +- }; +- + watchdog@20620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x20620 0x20>; +@@ -80,25 +26,6 @@ + IRQ_TYPE_EDGE_RISING)>; + clocks = <&periph_clk>; + }; +- +- gic: interrupt-controller@21000 { +- compatible = "arm,cortex-a9-gic"; +- #interrupt-cells = <3>; +- #address-cells = <0>; +- interrupt-controller; +- reg = <0x21000 0x1000>, +- <0x20100 0x100>; +- }; +- +- L2: cache-controller@22000 { +- compatible = "arm,pl310-cache"; +- reg = <0x22000 0x1000>; +- cache-unified; +- arm,shared-override; +- prefetch-data = <1>; +- prefetch-instr = <1>; +- cache-level = <2>; +- }; + }; + + pmu { +@@ -301,18 +228,6 @@ + }; + }; + +- nand_controller: nand-controller@18028000 { +- compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; +- reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; +- reg-names = "nand", "iproc-idm", "iproc-ext"; +- interrupts = ; +- +- #address-cells = <1>; +- #size-cells = <0>; +- +- brcm,nand-has-wp; +- }; +- + spi@18029200 { + compatible = "brcm,spi-nsp-qspi", "brcm,spi-bcm-qspi"; + reg = <0x18029200 0x184>, diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0005-ARM-dts-BCM5301X-Relicense-AXI-interrupts-code-to-th.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0005-ARM-dts-BCM5301X-Relicense-AXI-interrupts-code-to-th.patch new file mode 100644 index 00000000000000..ef29266d0b7ffb --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0005-ARM-dts-BCM5301X-Relicense-AXI-interrupts-code-to-th.patch @@ -0,0 +1,203 @@ +From 3b3e35b279bee5e51580c648399e20323467f58c Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 15 May 2023 17:19:21 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Relicense AXI interrupts code to the GPL + 2.0+ / MIT +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Those entries were added by: +1. Hauke in commits dec378827c4a ("ARM: BCM5301X: Add IRQs to Broadcom's + bus-axi in DTS file") and 1f80de6863ca ("ARM: BCM5301X: add IRQ + numbers for PCIe controller") +2. Florian in the commit 2cd0c0202f13 ("ARM: dts: BCM5301X: Add SRAB + interrupts") + +Move them to the bcm-ns.dtsi which uses dual licensing. That syncs more +Northstar code to be based on the same licensing schema. + +Signed-off-by: Rafał Miłecki +Cc: Hauke Mehrtens +Cc: Florian Fainelli +Acked-by: Hauke Mehrtens +Link: https://lore.kernel.org/r/20230515151921.25021-2-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm-ns.dtsi | 73 ++++++++++++++++++++++++++++++++ + arch/arm/boot/dts/bcm5301x.dtsi | 75 --------------------------------- + 2 files changed, 73 insertions(+), 75 deletions(-) + +--- a/arch/arm/boot/dts/bcm-ns.dtsi ++++ b/arch/arm/boot/dts/bcm-ns.dtsi +@@ -92,6 +92,79 @@ + #address-cells = <1>; + #size-cells = <1>; + ++ #interrupt-cells = <1>; ++ interrupt-map-mask = <0x000fffff 0xffff>; ++ interrupt-map = ++ /* ChipCommon */ ++ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, ++ ++ /* Switch Register Access Block */ ++ <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, ++ ++ /* PCIe Controller 0 */ ++ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, ++ ++ /* PCIe Controller 1 */ ++ <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, ++ ++ /* PCIe Controller 2 */ ++ <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, ++ ++ /* USB 2.0 Controller */ ++ <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, ++ ++ /* USB 3.0 Controller */ ++ <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, ++ ++ /* Ethernet Controller 0 */ ++ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, ++ ++ /* Ethernet Controller 1 */ ++ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, ++ ++ /* Ethernet Controller 2 */ ++ <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, ++ ++ /* Ethernet Controller 3 */ ++ <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, ++ ++ /* NAND Controller */ ++ <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; ++ + chipcommon: chipcommon@0 { + reg = <0x00000000 0x1000>; + +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -3,8 +3,6 @@ + * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015, + * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs + * +- * Copyright 2013-2014 Hauke Mehrtens +- * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +@@ -72,79 +70,6 @@ + }; + + axi@18000000 { +- #interrupt-cells = <1>; +- interrupt-map-mask = <0x000fffff 0xffff>; +- interrupt-map = +- /* ChipCommon */ +- <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, +- +- /* Switch Register Access Block */ +- <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, +- <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, +- <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, +- <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, +- <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, +- <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, +- <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, +- <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, +- <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, +- <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, +- <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, +- <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, +- <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, +- +- /* PCIe Controller 0 */ +- <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, +- <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, +- <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, +- <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, +- <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, +- <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, +- +- /* PCIe Controller 1 */ +- <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, +- <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, +- <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, +- <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, +- <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, +- <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, +- +- /* PCIe Controller 2 */ +- <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, +- <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, +- <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, +- <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, +- <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, +- <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, +- +- /* USB 2.0 Controller */ +- <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, +- +- /* USB 3.0 Controller */ +- <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>, +- +- /* Ethernet Controller 0 */ +- <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, +- +- /* Ethernet Controller 1 */ +- <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, +- +- /* Ethernet Controller 2 */ +- <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, +- +- /* Ethernet Controller 3 */ +- <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, +- +- /* NAND Controller */ +- <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>, +- <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, +- <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>, +- <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, +- <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, +- <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, +- <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, +- <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; +- + pcie2: pcie@14000 { + reg = <0x00014000 0x1000>; + }; diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0006-ARM-dts-BCM5301X-Specify-MAC-addresses-on-Luxul-devi.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0006-ARM-dts-BCM5301X-Specify-MAC-addresses-on-Luxul-devi.patch new file mode 100644 index 00000000000000..7d9b2971915090 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0006-ARM-dts-BCM5301X-Specify-MAC-addresses-on-Luxul-devi.patch @@ -0,0 +1,336 @@ +From dfa6570eb5ce2f24059caadbe2ed70034b5337bc Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 15 May 2023 10:33:08 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Specify MAC addresses on Luxul devices +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Use NRAM (NVMEM device) and its "et0macaddr" variable (NVMEM cell) to +point Ethernet devices to their MAC addresses. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20230515083308.7612-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 13 +++++++++++++ + arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 13 +++++++++++++ + arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 13 +++++++++++++ + arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 11 +++++++++++ + arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 11 +++++++++++ + arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 13 +++++++++++++ + arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 11 +++++++++++ + arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 13 +++++++++++++ + arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 11 +++++++++++ + arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 5 ++++- + 10 files changed, 113 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts ++++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +@@ -20,6 +20,14 @@ + reg = <0x00000000 0x08000000>; + }; + ++ nvram@1eff0000 { ++ compatible = "brcm,nvram"; ++ reg = <0x1eff0000 0x10000>; ++ ++ et0macaddr: et0macaddr { ++ }; ++ }; ++ + leds { + compatible = "gpio-leds"; + +@@ -53,6 +61,11 @@ + }; + }; + ++&gmac0 { ++ nvmem-cells = <&et0macaddr>; ++ nvmem-cell-names = "mac-address"; ++}; ++ + &spi_nor { + status = "okay"; + }; +--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts ++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +@@ -24,6 +24,14 @@ + reg = <0x00000000 0x08000000>; + }; + ++ nvram@1eff0000 { ++ compatible = "brcm,nvram"; ++ reg = <0x1eff0000 0x10000>; ++ ++ et0macaddr: et0macaddr { ++ }; ++ }; ++ + nand_controller: nand-controller@18028000 { + nand@0 { + partitions { +@@ -60,6 +68,11 @@ + }; + }; + ++&gmac0 { ++ nvmem-cells = <&et0macaddr>; ++ nvmem-cell-names = "mac-address"; ++}; ++ + &spi_nor { + status = "okay"; + }; +--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts ++++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +@@ -20,6 +20,14 @@ + reg = <0x00000000 0x08000000>; + }; + ++ nvram@1eff0000 { ++ compatible = "brcm,nvram"; ++ reg = <0x1eff0000 0x10000>; ++ ++ et0macaddr: et0macaddr { ++ }; ++ }; ++ + leds { + compatible = "gpio-leds"; + +@@ -53,6 +61,11 @@ + }; + }; + ++&gmac0 { ++ nvmem-cells = <&et0macaddr>; ++ nvmem-cell-names = "mac-address"; ++}; ++ + &spi_nor { + status = "okay"; + }; +--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts ++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +@@ -24,6 +24,10 @@ + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; ++ ++ et0macaddr: et0macaddr { ++ #nvmem-cell-cells = <1>; ++ }; + }; + + leds { +@@ -106,6 +110,11 @@ + vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>; + }; + ++&gmac0 { ++ nvmem-cells = <&et0macaddr 0>; ++ nvmem-cell-names = "mac-address"; ++}; ++ + &spi_nor { + status = "okay"; + }; +@@ -137,6 +146,8 @@ + port@4 { + reg = <4>; + label = "wan"; ++ nvmem-cells = <&et0macaddr 5>; ++ nvmem-cell-names = "mac-address"; + }; + + port@5 { +--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +@@ -25,6 +25,10 @@ + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; ++ ++ et0macaddr: et0macaddr { ++ #nvmem-cell-cells = <1>; ++ }; + }; + + leds { +@@ -61,6 +65,11 @@ + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; + }; + ++&gmac0 { ++ nvmem-cells = <&et0macaddr 0>; ++ nvmem-cell-names = "mac-address"; ++}; ++ + &spi_nor { + status = "okay"; + }; +@@ -76,6 +85,8 @@ + port@0 { + reg = <0>; + label = "wan"; ++ nvmem-cells = <&et0macaddr 1>; ++ nvmem-cell-names = "mac-address"; + }; + + port@1 { +--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts +@@ -20,6 +20,14 @@ + reg = <0x00000000 0x08000000>; + }; + ++ nvram@1eff0000 { ++ compatible = "brcm,nvram"; ++ reg = <0x1eff0000 0x10000>; ++ ++ et0macaddr: et0macaddr { ++ }; ++ }; ++ + leds { + compatible = "gpio-leds"; + +@@ -51,6 +59,11 @@ + }; + }; + ++&gmac0 { ++ nvmem-cells = <&et0macaddr>; ++ nvmem-cell-names = "mac-address"; ++}; ++ + &spi_nor { + status = "okay"; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +@@ -25,6 +25,10 @@ + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; ++ ++ et0macaddr: et0macaddr { ++ #nvmem-cell-cells = <1>; ++ }; + }; + + leds { +@@ -61,6 +65,11 @@ + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; + }; + ++&gmac0 { ++ nvmem-cells = <&et0macaddr 0>; ++ nvmem-cell-names = "mac-address"; ++}; ++ + &spi_nor { + status = "okay"; + }; +@@ -76,6 +85,8 @@ + port@0 { + reg = <0>; + label = "wan"; ++ nvmem-cells = <&et0macaddr 1>; ++ nvmem-cell-names = "mac-address"; + }; + + port@1 { +--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +@@ -22,6 +22,14 @@ + <0x88000000 0x18000000>; + }; + ++ nvram@1eff0000 { ++ compatible = "brcm,nvram"; ++ reg = <0x1eff0000 0x10000>; ++ ++ et0macaddr: et0macaddr { ++ }; ++ }; ++ + leds { + compatible = "gpio-leds"; + +@@ -47,6 +55,11 @@ + status = "okay"; + }; + ++&gmac0 { ++ nvmem-cells = <&et0macaddr>; ++ nvmem-cell-names = "mac-address"; ++}; ++ + &spi_nor { + status = "okay"; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +@@ -25,6 +25,10 @@ + nvram@1eff0000 { + compatible = "brcm,nvram"; + reg = <0x1eff0000 0x10000>; ++ ++ et0macaddr: et0macaddr { ++ #nvmem-cell-cells = <1>; ++ }; + }; + + leds { +@@ -101,6 +105,11 @@ + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; + }; + ++&gmac0 { ++ nvmem-cells = <&et0macaddr 0>; ++ nvmem-cell-names = "mac-address"; ++}; ++ + &spi_nor { + status = "okay"; + }; +@@ -136,6 +145,8 @@ + port@4 { + reg = <4>; + label = "wan"; ++ nvmem-cells = <&et0macaddr 5>; ++ nvmem-cell-names = "mac-address"; + }; + + port@5 { +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +@@ -27,6 +27,7 @@ + reg = <0x1eff0000 0x10000>; + + et0macaddr: et0macaddr { ++ #nvmem-cell-cells = <1>; + }; + }; + +@@ -76,7 +77,7 @@ + }; + + &gmac0 { +- nvmem-cells = <&et0macaddr>; ++ nvmem-cells = <&et0macaddr 0>; + nvmem-cell-names = "mac-address"; + }; + +@@ -119,6 +120,8 @@ + port@4 { + reg = <4>; + label = "wan"; ++ nvmem-cells = <&et0macaddr 5>; ++ nvmem-cell-names = "mac-address"; + }; + + port@5 { diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0007-ARM-dts-BCM5301X-Use-updated-device-compatible-strin.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0007-ARM-dts-BCM5301X-Use-updated-device-compatible-strin.patch new file mode 100644 index 00000000000000..5f5890e2915f3c --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0007-ARM-dts-BCM5301X-Use-updated-device-compatible-strin.patch @@ -0,0 +1,90 @@ +From 9d7121f1d2faa0b50bf5b462adcd2dd91970c45e Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Sat, 20 May 2023 13:26:01 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Use updated device "compatible" strings +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Northstar binding was updated to use minus/hyphen char between model and +version for all devices. + +Signed-off-by: Rafał Miłecki +Reviewed-by: Linus Walleij +Link: https://lore.kernel.org/r/20230520112601.11821-2-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 2 +- + arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +- + arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 2 +- + arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 2 +- + arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 2 +- + arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 2 +- + 6 files changed, 6 insertions(+), 6 deletions(-) + +--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts ++++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +@@ -8,7 +8,7 @@ + #include "bcm4708.dtsi" + + / { +- compatible = "luxul,xap-1510v1", "brcm,bcm4708"; ++ compatible = "luxul,xap-1510-v1", "brcm,bcm4708"; + model = "Luxul XAP-1510 V1"; + + chosen { +--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +@@ -13,7 +13,7 @@ + #include "bcm5301x-nand-cs0-bch8.dtsi" + + / { +- compatible = "netgear,r6250v1", "brcm,bcm4708"; ++ compatible = "netgear,r6250-v1", "brcm,bcm4708"; + model = "Netgear R6250 V1 (BCM4708)"; + + chosen { +--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +@@ -12,7 +12,7 @@ + #include "bcm5301x-nand-cs0-bch8.dtsi" + + / { +- compatible = "netgear,r6300v2", "brcm,bcm4708"; ++ compatible = "netgear,r6300-v2", "brcm,bcm4708"; + model = "Netgear R6300 V2 (BCM4708)"; + + chosen { +--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts ++++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +@@ -8,7 +8,7 @@ + #include "bcm47081.dtsi" + + / { +- compatible = "luxul,xap-1410v1", "brcm,bcm47081", "brcm,bcm4708"; ++ compatible = "luxul,xap-1410-v1", "brcm,bcm47081", "brcm,bcm4708"; + model = "Luxul XAP-1410 V1"; + + chosen { +--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts ++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +@@ -9,7 +9,7 @@ + #include "bcm5301x-nand-cs0-bch4.dtsi" + + / { +- compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708"; ++ compatible = "luxul,xwr-1200-v1", "brcm,bcm47081", "brcm,bcm4708"; + model = "Luxul XWR-1200 V1"; + + chosen { +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +@@ -9,7 +9,7 @@ + #include "bcm5301x-nand-cs0-bch4.dtsi" + + / { +- compatible = "luxul,xwr-3100v1", "brcm,bcm47094", "brcm,bcm4708"; ++ compatible = "luxul,xwr-3100-v1", "brcm,bcm47094", "brcm,bcm4708"; + model = "Luxul XWR-3100 V1"; + + chosen { diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0008-ARM-dts-BCM5301X-Use-updated-spi-gpio-binding-proper.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0008-ARM-dts-BCM5301X-Use-updated-spi-gpio-binding-proper.patch new file mode 100644 index 00000000000000..c16587f6840d02 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0008-ARM-dts-BCM5301X-Use-updated-spi-gpio-binding-proper.patch @@ -0,0 +1,82 @@ +From 04afb51c1dce90051487d3c7b70a1b1b246ce29a Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 2 Jun 2023 17:10:23 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Use updated "spi-gpio" binding properties +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Switch away from deprecated properties. + +This fixes: +arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: gpio-sck: False schema does not allow [[6, 7, 0]] + From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml +arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: gpio-mosi: False schema does not allow [[6, 4, 0]] + From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml +arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: 'sck-gpios' is a required property + From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml +arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dtb: spi: Unevaluated properties are not allowed ('gpio-mosi', 'gpio-sck' were unexpected) + From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20230602151023.8607-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi | 4 ++-- + arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++-- + arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 4 ++-- + arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts | 4 ++-- + 4 files changed, 8 insertions(+), 8 deletions(-) + +--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi +@@ -16,8 +16,8 @@ + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; +- gpio-sck = <&chipcommon 7 0>; +- gpio-mosi = <&chipcommon 4 0>; ++ sck-gpios = <&chipcommon 7 0>; ++ mosi-gpios = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; +--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +@@ -28,8 +28,8 @@ + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; +- gpio-sck = <&chipcommon 7 0>; +- gpio-mosi = <&chipcommon 4 0>; ++ sck-gpios = <&chipcommon 7 0>; ++ mosi-gpios = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; +--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts ++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +@@ -28,8 +28,8 @@ + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; +- gpio-sck = <&chipcommon 7 0>; +- gpio-mosi = <&chipcommon 4 0>; ++ sck-gpios = <&chipcommon 7 0>; ++ mosi-gpios = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; +--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts ++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts +@@ -28,8 +28,8 @@ + spi { + compatible = "spi-gpio"; + num-chipselects = <1>; +- gpio-sck = <&chipcommon 7 0>; +- gpio-mosi = <&chipcommon 4 0>; ++ sck-gpios = <&chipcommon 7 0>; ++ mosi-gpios = <&chipcommon 4 0>; + cs-gpios = <&chipcommon 6 0>; + #address-cells = <1>; + #size-cells = <0>; diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0009-ARM-dts-BCM5301X-Drop-invalid-usb-cells.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0009-ARM-dts-BCM5301X-Drop-invalid-usb-cells.patch new file mode 100644 index 00000000000000..59fa457aee6972 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0009-ARM-dts-BCM5301X-Drop-invalid-usb-cells.patch @@ -0,0 +1,54 @@ +From c3acdd4901192bc69dc577012663d5abae21661e Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 2 Jun 2023 15:34:54 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Drop invalid #usb-cells +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Such property simply doesn't exist (is not documented or used anywhere). + +This fixes: +arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@21000: Unevaluated properties are not allowed ('#usb-cells' was unexpected) + From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml +arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@22000: Unevaluated properties are not allowed ('#usb-cells' was unexpected) + From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml +arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: usb@23000: Unevaluated properties are not allowed ('#usb-cells' was unexpected) + From schema: Documentation/devicetree/bindings/usb/generic-xhci.yaml + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20230602133455.7441-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm-ns.dtsi | 6 ------ + 1 file changed, 6 deletions(-) + +--- a/arch/arm/boot/dts/bcm-ns.dtsi ++++ b/arch/arm/boot/dts/bcm-ns.dtsi +@@ -192,8 +192,6 @@ + interrupt-parent = <&gic>; + + ehci: usb@21000 { +- #usb-cells = <0>; +- + compatible = "generic-ehci"; + reg = <0x00021000 0x1000>; + interrupts = ; +@@ -214,8 +212,6 @@ + }; + + ohci: usb@22000 { +- #usb-cells = <0>; +- + compatible = "generic-ohci"; + reg = <0x00022000 0x1000>; + interrupts = ; +@@ -245,8 +241,6 @@ + interrupt-parent = <&gic>; + + xhci: usb@23000 { +- #usb-cells = <0>; +- + compatible = "generic-xhci"; + reg = <0x00023000 0x1000>; + interrupts = ; diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0010-ARM-dts-BCM5301X-Drop-invalid-properties-from-Meraki.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0010-ARM-dts-BCM5301X-Drop-invalid-properties-from-Meraki.patch new file mode 100644 index 00000000000000..b8411fc7196ea2 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0010-ARM-dts-BCM5301X-Drop-invalid-properties-from-Meraki.patch @@ -0,0 +1,31 @@ +From 676bf7d062c14191c3fc12f1e36e1f3809041483 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 2 Jun 2023 15:34:55 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Drop invalid properties from Meraki MR32 + keys +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This fixes: +arch/arm/boot/dts/bcm53015-meraki-mr26.dtb: keys: '#address-cells', '#size-cells' do not match any of the regexes: '^(button|event|key|switch|(button|event|key|switch)-[a-z0-9-]+|[a-z0-9-]+-(button|event|key|switch))$', 'pinctrl-[0-9]+' + From schema: Documentation/devicetree/bindings/input/gpio-keys.yaml + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20230602133455.7441-2-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 2 -- + 1 file changed, 2 deletions(-) + +--- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts ++++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts +@@ -39,8 +39,6 @@ + + keys { + compatible = "gpio-keys"; +- #address-cells = <1>; +- #size-cells = <0>; + + key-restart { + label = "Reset"; diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0011-ARM-dts-BCM5301X-Relicense-Christian-s-code-to-the-G.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0011-ARM-dts-BCM5301X-Relicense-Christian-s-code-to-the-G.patch new file mode 100644 index 00000000000000..7496321269f542 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0011-ARM-dts-BCM5301X-Relicense-Christian-s-code-to-the-G.patch @@ -0,0 +1,106 @@ +From 1d5682ccc7d6088179b6cfd50a3e3bb6d2b0527e Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 5 Jun 2023 08:10:49 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Relicense Christian's code to the GPL + 2.0+ / MIT +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Move code added by Christian to the bcm-ns.dtsi which uses dual +licensing. That syncs more Northstar code to be based on the same +licensing schema. + +Cc: Christian Lamparter +Signed-off-by: Rafał Miłecki +Acked-by: Christian Lamparter +Link: https://lore.kernel.org/r/20230605061049.16136-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm-ns.dtsi | 21 +++++++++++++++++++++ + arch/arm/boot/dts/bcm5301x.dtsi | 23 ----------------------- + 2 files changed, 21 insertions(+), 23 deletions(-) + +--- a/arch/arm/boot/dts/bcm-ns.dtsi ++++ b/arch/arm/boot/dts/bcm-ns.dtsi +@@ -182,6 +182,10 @@ + reg = <0x00013000 0x1000>; + }; + ++ pcie2: pcie@14000 { ++ reg = <0x00014000 0x1000>; ++ }; ++ + usb2: usb2@21000 { + reg = <0x00021000 0x1000>; + +@@ -274,6 +278,14 @@ + }; + }; + ++ pwm: pwm@18002000 { ++ compatible = "brcm,iproc-pwm"; ++ reg = <0x18002000 0x28>; ++ clocks = <&osc>; ++ #pwm-cells = <3>; ++ status = "disabled"; ++ }; ++ + mdio: mdio@18003000 { + compatible = "brcm,iproc-mdio"; + reg = <0x18003000 0x8>; +@@ -299,6 +311,15 @@ + }; + }; + ++ uart2: serial@18008000 { ++ compatible = "ns16550a"; ++ reg = <0x18008000 0x20>; ++ clocks = <&iprocslow>; ++ interrupts = ; ++ reg-shift = <2>; ++ status = "disabled"; ++ }; ++ + dmu-bus@1800c000 { + compatible = "simple-bus"; + ranges = <0 0x1800c000 0x1000>; +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -69,20 +69,6 @@ + }; + }; + +- axi@18000000 { +- pcie2: pcie@14000 { +- reg = <0x00014000 0x1000>; +- }; +- }; +- +- pwm: pwm@18002000 { +- compatible = "brcm,iproc-pwm"; +- reg = <0x18002000 0x28>; +- clocks = <&osc>; +- #pwm-cells = <3>; +- status = "disabled"; +- }; +- + mdio-mux@18003000 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&mdio>; +@@ -110,15 +96,6 @@ + reg = <0x18105000 0x1000>; + }; + +- uart2: serial@18008000 { +- compatible = "ns16550a"; +- reg = <0x18008000 0x20>; +- clocks = <&iprocslow>; +- interrupts = ; +- reg-shift = <2>; +- status = "disabled"; +- }; +- + i2c0: i2c@18009000 { + compatible = "brcm,iproc-i2c"; + reg = <0x18009000 0x50>; diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0012-ARM-dts-BCM5301X-Describe-switch-ports-in-the-main-D.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0012-ARM-dts-BCM5301X-Describe-switch-ports-in-the-main-D.patch new file mode 100644 index 00000000000000..fa2f21af532504 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0012-ARM-dts-BCM5301X-Describe-switch-ports-in-the-main-D.patch @@ -0,0 +1,838 @@ +From ba4aebce23b2affb810b8a60eae853674d2cded2 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Mon, 5 Jun 2023 15:21:09 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Describe switch ports in the main DTS +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +All Northstar SoCs have BCM5301x switches (BCM53011, BCM53012) with 8 +ports (0-8 without 6). By design 3 switch ports (5, 7 and 8) are +hardwired to 3 on-SoC Ethernet interfaces. Switch port 8 requires +forcing link state. + +It seems that global Northstar .dtsi file is the best place to describe +those hw details. Only device specific bits (like labels) should go to +device .dts files. + +This seems to fit well with a tiny exception of Asus RT-AC88U which +somehow was designed to have switch 5 connected to an extra switch. This +case was simply handled with a /delete-property/. + +Signed-off-by: Rafał Miłecki +Reviewed-by: Christian Lamparter (MR32+MR26) +Link: https://lore.kernel.org/r/20230605132109.7933-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm-ns.dtsi | 41 ++++++++++++++++++- + .../bcm4708-buffalo-wzr-1166dhp-common.dtsi | 7 ---- + arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts | 4 -- + arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 3 -- + arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 7 ---- + arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 7 ---- + .../boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 7 ---- + arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts | 3 -- + arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 7 ---- + arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 12 ------ + arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 17 +------- + arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 12 ------ + arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts | 12 ------ + .../boot/dts/bcm47094-linksys-panamera.dts | 34 ++++----------- + arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts | 7 ---- + arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts | 4 -- + arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts | 7 ---- + arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts | 3 -- + arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts | 7 ---- + .../boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 7 ---- + arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 3 -- + arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 3 -- + 22 files changed, 51 insertions(+), 163 deletions(-) + +--- a/arch/arm/boot/dts/bcm-ns.dtsi ++++ b/arch/arm/boot/dts/bcm-ns.dtsi +@@ -304,10 +304,49 @@ + + status = "disabled"; + +- /* ports are defined in board DTS */ + ports { + #address-cells = <1>; + #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ }; ++ ++ port@4 { ++ reg = <4>; ++ }; ++ ++ port@5 { ++ reg = <5>; ++ ethernet = <&gmac0>; ++ }; ++ ++ port@7 { ++ reg = <7>; ++ ethernet = <&gmac1>; ++ }; ++ ++ port@8 { ++ reg = <8>; ++ ethernet = <&gmac2>; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; + }; + }; + +--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1166dhp-common.dtsi +@@ -159,34 +159,27 @@ + + ports { + port@0 { +- reg = <0>; + label = "lan1"; + }; + + port@1 { +- reg = <1>; + label = "lan2"; + }; + + port@2 { +- reg = <2>; + label = "lan3"; + }; + + port@3 { +- reg = <3>; + label = "lan4"; + }; + + port@4 { +- reg = <4>; + label = "wan"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts ++++ b/arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts +@@ -75,19 +75,15 @@ + + ports { + port@0 { +- reg = <0>; + label = "poe"; + }; + + port@4 { +- reg = <4>; + label = "lan"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts ++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +@@ -82,14 +82,11 @@ + + ports { + port@4 { +- reg = <4>; + label = "lan"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +@@ -100,34 +100,27 @@ + + ports { + port@0 { +- reg = <0>; + label = "lan4"; + }; + + port@1 { +- reg = <1>; + label = "lan3"; + }; + + port@2 { +- reg = <2>; + label = "lan2"; + }; + + port@3 { +- reg = <3>; + label = "lan1"; + }; + + port@4 { +- reg = <4>; + label = "wan"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts ++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +@@ -123,34 +123,27 @@ + + ports { + port@0 { +- reg = <0>; + label = "lan4"; + }; + + port@1 { +- reg = <1>; + label = "lan3"; + }; + + port@2 { +- reg = <2>; + label = "lan2"; + }; + + port@3 { +- reg = <3>; + label = "lan1"; + }; + + port@4 { +- reg = <4>; + label = "wan"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts ++++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +@@ -123,34 +123,27 @@ + + ports { + port@0 { +- reg = <0>; + label = "lan1"; + }; + + port@1 { +- reg = <1>; + label = "lan2"; + }; + + port@2 { +- reg = <2>; + label = "lan3"; + }; + + port@3 { +- reg = <3>; + label = "lan4"; + }; + + port@4 { +- reg = <4>; + label = "wan"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts ++++ b/arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts +@@ -75,14 +75,11 @@ + + ports { + port@4 { +- reg = <4>; + label = "poe"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts ++++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts +@@ -124,36 +124,29 @@ + + ports { + port@0 { +- reg = <0>; + label = "lan4"; + }; + + port@1 { +- reg = <1>; + label = "lan3"; + }; + + port@2 { +- reg = <2>; + label = "lan2"; + }; + + port@3 { +- reg = <3>; + label = "lan1"; + }; + + port@4 { +- reg = <4>; + label = "wan"; + nvmem-cells = <&et0macaddr 5>; + nvmem-cell-names = "mac-address"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +@@ -191,39 +191,27 @@ + + ports { + port@0 { +- reg = <0>; + label = "lan1"; + }; + + port@1 { +- reg = <1>; + label = "lan2"; + }; + + port@2 { +- reg = <2>; + label = "lan3"; + }; + + port@3 { +- reg = <3>; + label = "lan4"; + }; + + port@4 { +- reg = <4>; + label = "wan"; + }; + + port@8 { +- reg = <8>; + label = "cpu"; +- ethernet = <&gmac2>; +- +- fixed-link { +- speed = <1000>; +- full-duplex; +- }; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts ++++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +@@ -181,32 +181,28 @@ + + ports { + port@0 { +- reg = <0>; + label = "lan4"; + }; + + port@1 { +- reg = <1>; + label = "lan3"; + }; + + port@2 { +- reg = <2>; + label = "lan2"; + }; + + port@3 { +- reg = <3>; + label = "lan1"; + }; + + port@4 { +- reg = <4>; + label = "wan"; + }; + + sw0_p5: port@5 { +- reg = <5>; ++ /delete-property/ethernet; ++ + label = "extsw"; + phy-mode = "rgmii"; + +@@ -218,8 +214,6 @@ + }; + + port@7 { +- reg = <7>; +- ethernet = <&gmac1>; + label = "cpu"; + + fixed-link { +@@ -229,14 +223,7 @@ + }; + + port@8 { +- reg = <8>; +- ethernet = <&gmac2>; + label = "cpu"; +- +- fixed-link { +- speed = <1000>; +- full-duplex; +- }; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +@@ -124,39 +124,27 @@ + + ports { + port@0 { +- reg = <0>; + label = "lan4"; + }; + + port@1 { +- reg = <1>; + label = "lan3"; + }; + + port@2 { +- reg = <2>; + label = "lan2"; + }; + + port@3 { +- reg = <3>; + label = "lan1"; + }; + + port@4 { +- reg = <4>; + label = "wan"; + }; + + port@8 { +- reg = <8>; + label = "cpu"; +- ethernet = <&gmac2>; +- +- fixed-link { +- speed = <1000>; +- full-duplex; +- }; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-890l.dts +@@ -172,40 +172,28 @@ + + ports { + port@0 { +- reg = <0>; + label = "lan1"; + }; + + port@1 { +- reg = <1>; + label = "lan2"; + }; + + port@2 { +- reg = <2>; + label = "lan3"; + }; + + port@3 { +- reg = <3>; + label = "lan4"; + }; + + port@4 { +- reg = <4>; + label = "wan"; + }; + + port@8 { +- reg = <8>; + label = "cpu"; +- ethernet = <&gmac2>; + phy-mode = "rgmii"; +- +- fixed-link { +- speed = <1000>; +- full-duplex; +- }; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts ++++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts +@@ -207,29 +207,32 @@ + dsa,member = <0 0>; + + ports { ++ sw0_p0: port@0 { ++ label = "extsw"; ++ ++ fixed-link { ++ speed = <1000>; ++ full-duplex; ++ }; ++ }; ++ + port@1 { +- reg = <1>; + label = "lan7"; + }; + + port@2 { +- reg = <2>; + label = "lan4"; + }; + + port@3 { +- reg = <3>; + label = "lan8"; + }; + + port@4 { +- reg = <4>; + label = "wan"; + }; + + port@5 { +- reg = <5>; +- ethernet = <&gmac0>; + label = "cpu"; + status = "disabled"; + +@@ -240,8 +243,6 @@ + }; + + port@7 { +- reg = <7>; +- ethernet = <&gmac1>; + label = "cpu"; + status = "disabled"; + +@@ -252,24 +253,7 @@ + }; + + port@8 { +- reg = <8>; +- ethernet = <&gmac2>; + label = "cpu"; +- +- fixed-link { +- speed = <1000>; +- full-duplex; +- }; +- }; +- +- sw0_p0: port@0 { +- reg = <0>; +- label = "extsw"; +- +- fixed-link { +- speed = <1000>; +- full-duplex; +- }; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +@@ -83,36 +83,29 @@ + + ports { + port@0 { +- reg = <0>; + label = "wan"; + nvmem-cells = <&et0macaddr 1>; + nvmem-cell-names = "mac-address"; + }; + + port@1 { +- reg = <1>; + label = "lan4"; + }; + + port@2 { +- reg = <2>; + label = "lan3"; + }; + + port@3 { +- reg = <3>; + label = "lan2"; + }; + + port@4 { +- reg = <4>; + label = "lan1"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xap-1610.dts +@@ -73,19 +73,15 @@ + + ports { + port@0 { +- reg = <0>; + label = "poe"; + }; + + port@1 { +- reg = <1>; + label = "lan"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +@@ -83,36 +83,29 @@ + + ports { + port@0 { +- reg = <0>; + label = "wan"; + nvmem-cells = <&et0macaddr 1>; + nvmem-cell-names = "mac-address"; + }; + + port@1 { +- reg = <1>; + label = "lan4"; + }; + + port@2 { +- reg = <2>; + label = "lan3"; + }; + + port@3 { +- reg = <3>; + label = "lan2"; + }; + + port@4 { +- reg = <4>; + label = "lan1"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +@@ -69,14 +69,11 @@ + + ports { + port@0 { +- reg = <0>; + label = "lan"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts +@@ -123,36 +123,29 @@ + + ports { + port@0 { +- reg = <0>; + label = "lan4"; + }; + + port@1 { +- reg = <1>; + label = "lan3"; + }; + + port@2 { +- reg = <2>; + label = "lan2"; + }; + + port@3 { +- reg = <3>; + label = "lan1"; + }; + + port@4 { +- reg = <4>; + label = "wan"; + nvmem-cells = <&et0macaddr 5>; + nvmem-cell-names = "mac-address"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts ++++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts +@@ -98,36 +98,29 @@ + + ports { + port@0 { +- reg = <0>; + label = "lan4"; + }; + + port@1 { +- reg = <1>; + label = "lan3"; + }; + + port@2 { +- reg = <2>; + label = "lan2"; + }; + + port@3 { +- reg = <3>; + label = "lan1"; + }; + + port@4 { +- reg = <4>; + label = "wan"; + nvmem-cells = <&et0macaddr 5>; + nvmem-cell-names = "mac-address"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts ++++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts +@@ -115,14 +115,11 @@ + + ports { + port@0 { +- reg = <0>; + label = "poe"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + + fixed-link { + speed = <1000>; +--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts ++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +@@ -176,14 +176,11 @@ + + ports { + port@0 { +- reg = <0>; + label = "poe"; + }; + + port@5 { +- reg = <5>; + label = "cpu"; +- ethernet = <&gmac0>; + + fixed-link { + speed = <1000>; diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0013-ARM-dts-BCM5301X-MR26-MR32-remove-bogus-nand-ecc-alg.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0013-ARM-dts-BCM5301X-MR26-MR32-remove-bogus-nand-ecc-alg.patch new file mode 100644 index 00000000000000..ea571f459ab5a9 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0013-ARM-dts-BCM5301X-MR26-MR32-remove-bogus-nand-ecc-alg.patch @@ -0,0 +1,63 @@ +From a6a1a156f5debaebf9f61850d111b966e9be9ee9 Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Thu, 8 Jun 2023 17:36:27 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: MR26: MR32: remove bogus nand-ecc-algo + property +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +| bcm53015-meraki-mr26.dtb: nand-controller@18028000: +| nand@0:nand-ecc-algo:0: 'hw' is not one of ['hamming', 'bch', 'rs'] +| From schema: Documentation/[...]/nand-controller.yaml +| bcm53016-meraki-mr32.dtb: nand-controller@18028000: +| nand@0:nand-ecc-algo:0: 'hw' is not one of ['hamming', 'bch', 'rs'] +| From schema: Documentation/[...]/nand-controller.yaml + +original ECC values for these old Merakis are sadly not +provided by the vendor. It looks like Meraki just stuck +with what Broadcom's SDK was doing... which left this +up to the proprietary nand driver. + +Note: The invalid setting was and is handled by brcmnand. It +falls back to "bch" in brcmnand_setup_dev() when ecc.algo is +set to NAND_ECC_ALGO_UNKNOWN (since "hw" is not in the list +above). + +A correct nand-ecc-algo = "bch"; is already specified in the +included "bcm5301x-nand-cs0-bch8.dtsi". So this line can be +dropped. + +Reported-by: Rafał Miłecki (per Mail) +Fixes: 935327a73553 ("ARM: dts: BCM5301X: Add DT for Meraki MR26") +Fixes: ec88a9c344d9 ("ARM: BCM5301X: Add DT for Meraki MR32") +Signed-off-by: Christian Lamparter +Link: https://lore.kernel.org/r/2c4d00dd40124c2ddc0b139cbce7531b108f9052.1686238550.git.chunkeey@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 2 -- + arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 -- + 2 files changed, 4 deletions(-) + +--- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts ++++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts +@@ -72,8 +72,6 @@ + }; + + &nandcs { +- nand-ecc-algo = "hw"; +- + partitions { + compatible = "fixed-partitions"; + #address-cells = <0x1>; +--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts ++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +@@ -125,8 +125,6 @@ + }; + + &nandcs { +- nand-ecc-algo = "hw"; +- + partitions { + /* + * The partition autodetection does not work for this device. diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0014-ARM-dts-BCM5301X-MR32-remove-partition-index-numbers.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0014-ARM-dts-BCM5301X-MR32-remove-partition-index-numbers.patch new file mode 100644 index 00000000000000..8eb5442d1714f9 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0014-ARM-dts-BCM5301X-MR32-remove-partition-index-numbers.patch @@ -0,0 +1,54 @@ +From d68b2f7d7d06872450d4f39d84d5926d7e7ae88c Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Thu, 8 Jun 2023 17:36:28 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: MR32: remove partition index numbers + +removes the partition indexes in the node names under. +This brings the device tree source in line with others. + +Signed-off-by: Christian Lamparter +Link: https://lore.kernel.org/r/627f57d568030a56499361790524b4d4f3381619.1686238550.git.chunkeey@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 10 +++++----- + 1 file changed, 5 insertions(+), 5 deletions(-) + +--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts ++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +@@ -138,31 +138,31 @@ + #address-cells = <0x1>; + #size-cells = <0x1>; + +- partition0@0 { ++ partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + read-only; + }; + +- partition1@100000 { ++ partition@100000 { + label = "bootkernel1"; + reg = <0x100000 0x300000>; + read-only; + }; + +- partition2@400000 { ++ partition@400000 { + label = "nvram"; + reg = <0x400000 0x100000>; + read-only; + }; + +- partition3@500000 { ++ partition@500000 { + label = "bootkernel2"; + reg = <0x500000 0x300000>; + read-only; + }; + +- partition4@800000 { ++ partition@800000 { + label = "ubi"; + reg = <0x800000 0x7780000>; + }; diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch new file mode 100644 index 00000000000000..805dcf54ebbda4 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch @@ -0,0 +1,44 @@ +From fd274b733bfdde3ca72f0fa2a37f032f3a8c402c Mon Sep 17 00:00:00 2001 +From: Christian Lamparter +Date: Thu, 8 Jun 2023 17:36:29 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: fix duplex-full => full-duplex + +this typo was found by the dtbs_check +| ports:port@5:fixed-link: 'oneOf' conditional failed, +| {'speed': [[1000]], 'duplex-full': True} is not of type 'array' +| 'duplex-full' does not match any of the regexes: 'pinctrl-[0-]..." + +this should have been full-duplex; + +Fixes: 935327a73553 ("ARM: dts: BCM5301X: Add DT for Meraki MR26") +Fixes: ec88a9c344d9 ("ARM: BCM5301X: Add DT for Meraki MR32") +Signed-off-by: Christian Lamparter +Link: https://lore.kernel.org/r/50522f45566951a9eabd22820647924cc6b4a264.1686238550.git.chunkeey@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm53015-meraki-mr26.dts | 2 +- + arch/arm/boot/dts/bcm53016-meraki-mr32.dts | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/bcm53015-meraki-mr26.dts ++++ b/arch/arm/boot/dts/bcm53015-meraki-mr26.dts +@@ -121,7 +121,7 @@ + + fixed-link { + speed = <1000>; +- duplex-full; ++ full-duplex; + }; + }; + }; +--- a/arch/arm/boot/dts/bcm53016-meraki-mr32.dts ++++ b/arch/arm/boot/dts/bcm53016-meraki-mr32.dts +@@ -182,7 +182,7 @@ + + fixed-link { + speed = <1000>; +- duplex-full; ++ full-duplex; + }; + }; + }; diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0016-ARM-dts-BCM5301X-Add-Netgear-R8000-WiFi-regulator-ma.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0016-ARM-dts-BCM5301X-Add-Netgear-R8000-WiFi-regulator-ma.patch new file mode 100644 index 00000000000000..3ffe0b2f170e53 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0016-ARM-dts-BCM5301X-Add-Netgear-R8000-WiFi-regulator-ma.patch @@ -0,0 +1,61 @@ +From 752a63b8dbe6cc6900efd1035bea427a778a4b55 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 2 Jun 2023 15:59:25 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Add Netgear R8000 WiFi regulator mappings +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This allows setting FullMAC firmware regulatory domain. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20230602135925.14143-3-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 17 +++++++++++++++++ + 1 file changed, 17 insertions(+) + +--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts ++++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts +@@ -137,8 +137,10 @@ + #size-cells = <2>; + + wifi@0,1,0 { ++ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5735000 5835000>; ++ brcm,ccode-map = "JP-JP-78", "US-Q2-86"; + }; + }; + }; +@@ -159,6 +161,19 @@ + #address-cells = <3>; + #size-cells = <2>; + ++ bridge@1,0 { ++ reg = <0x800 0 0 0 0>; ++ ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ wifi@0,0 { ++ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; ++ reg = <0x0000 0 0 0 0>; ++ brcm,ccode-map = "JP-JP-78", "US-Q2-86"; ++ }; ++ }; ++ + bridge@1,2,2 { + reg = <0x1000 0 0 0 0>; + +@@ -166,8 +181,10 @@ + #size-cells = <2>; + + wifi@1,4,0 { ++ compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac"; + reg = <0x0000 0 0 0 0>; + ieee80211-freq-limit = <5170000 5730000>; ++ brcm,ccode-map = "JP-JP-78", "US-Q2-86"; + }; + }; + }; diff --git a/target/linux/bcm53xx/patches-5.10/039-v6.5-0017-ARM-dts-BCM5301X-Add-cells-sizes-to-PCIe-nodes.patch b/target/linux/bcm53xx/patches-5.10/039-v6.5-0017-ARM-dts-BCM5301X-Add-cells-sizes-to-PCIe-nodes.patch new file mode 100644 index 00000000000000..454ce4c278f5b6 --- /dev/null +++ b/target/linux/bcm53xx/patches-5.10/039-v6.5-0017-ARM-dts-BCM5301X-Add-cells-sizes-to-PCIe-nodes.patch @@ -0,0 +1,59 @@ +From b67cad33176e472df6d16a24ee7624299bdcd5d5 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Fri, 16 Jun 2023 12:58:27 +0200 +Subject: [PATCH] ARM: dts: BCM5301X: Add cells sizes to PCIe nodes +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This fixes: +arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#address-cells' is a required property + From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml +arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@12000: '#size-cells' is a required property + From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml +arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#address-cells' is a required property + From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml +arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@13000: '#size-cells' is a required property + From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml +arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#address-cells' is a required property + From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml +arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dtb: pcie@14000: '#size-cells' is a required property + From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml + +Two properties that need to be added later are "device_type" and +"ranges". Adding "device_type" on its own causes a new warning and the +value of "ranges" needs to be determined yet. + +Signed-off-by: Rafał Miłecki +Link: https://lore.kernel.org/r/20230616105827.21656-1-zajec5@gmail.com +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm-ns.dtsi | 9 +++++++++ + 1 file changed, 9 insertions(+) + +--- a/arch/arm/boot/dts/bcm-ns.dtsi ++++ b/arch/arm/boot/dts/bcm-ns.dtsi +@@ -176,14 +176,23 @@ + + pcie0: pcie@12000 { + reg = <0x00012000 0x1000>; ++ ++ #address-cells = <3>; ++ #size-cells = <2>; + }; + + pcie1: pcie@13000 { + reg = <0x00013000 0x1000>; ++ ++ #address-cells = <3>; ++ #size-cells = <2>; + }; + + pcie2: pcie@14000 { + reg = <0x00014000 0x1000>; ++ ++ #address-cells = <3>; ++ #size-cells = <2>; + }; + + usb2: usb2@21000 { diff --git a/target/linux/bcm53xx/patches-5.10/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch b/target/linux/bcm53xx/patches-5.10/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch index ffea250ccb943a..6368c2a536ce46 100644 --- a/target/linux/bcm53xx/patches-5.10/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch +++ b/target/linux/bcm53xx/patches-5.10/304-ARM-dts-BCM5301X-Specify-switch-ports-for-remaining-.patch @@ -10,7 +10,7 @@ Signed-off-by: Rafał Miłecki --- a/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts +++ b/arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts -@@ -93,3 +93,40 @@ +@@ -92,3 +92,40 @@ &usb3_phy { status = "okay"; }; diff --git a/target/linux/bcm53xx/patches-5.10/331-Meraki-MR32-Status-LEDs.patch b/target/linux/bcm53xx/patches-5.10/331-Meraki-MR32-Status-LEDs.patch index 92a71e58fe843b..2bc1033ee41a50 100644 --- a/target/linux/bcm53xx/patches-5.10/331-Meraki-MR32-Status-LEDs.patch +++ b/target/linux/bcm53xx/patches-5.10/331-Meraki-MR32-Status-LEDs.patch @@ -21,8 +21,8 @@ Signed-off-by: Christian Lamparter max-brightness = <255>; }; -- green { -+ led_status: green { +- led-1 { ++ led_status: led-1 { /* SYS-LED 1 - Tricolor */ function = LED_FUNCTION_POWER; color = ;