[Deprecated] Opsview Puppet Module

Introduction

The Opsview Puppet module allows for the synchronization of Opsview configuration using Opsview’s REST API service and is divided into many types, each of which is focused on a specific area of the Opsview configuration.

NOTE: You will need to install the 'rest-client' Ruby library to use this module. If you use your vendor-packaged version of Puppet, then you can either use the vendor's version of this library, or use 'gem install rest-client'. However, if you use the PuppetLab's version then you will need to install development tools (such as gcc and make, amoungst others) and then use /opt/puppetlabs/puppet/bin/gem install rest-client to ensure the library and its prerequisites are installed to the correct location.

Configuration

The puppet module should be installed into the standard location for Puppet modules, depending on the particular version of Puppet that you have. For example, this might be /etc/puppet/modules

After installing the module, you will need to create a file located at /etc/puppet/opsview.conf that contains the URL, username, and password for connecting to the Opsview system’s REST API.

/etc/puppet/opsview.conf

url: http://opsview-master/rest
username: admin
password: initial

Puppet Types

All puppet types take two parameters

Parameter	Description	Type
name	Name of the object	String
reload_opsview	Puppet will perform a reload at the end of the sync process	Boolean

 

opsview_bsmcomponent

Property	Description	Type
hosts	Hosts that make up the component	Array of strings
host_template	Host template that the component is built on	String
required_online	How many hosts are required to be online	String

Examples

opsview_bsmcomponent{'example-component':
  ensure => present,
  reload_opsview => true,
  hosts => ['hostA','hostB','hostC'],
  host_template => 'Network - Base',
  required_online => '2'
}

 

opsview_bsmservice

Property	Description	Type
components	Components that make up the BSM service	Array of strings

 

Examples

opsview_bsmservice{'example-bsmservice':
  ensure => present,
  reload_opsview => true,
  components => ['componentA','componentB','componentC']
}

opsview_contact

Property	Description	Type
description	Provides more information about the contact	String
full_name	Full name for the contact. Defaults to the name of the contact	String
homepage_id	An ID number that identifies which navigation icon is the home icon. ID "2" is for the "Host groups, hosts, and service view"	String
language	Which language to use in the UI. "" - Default browser setting "en" - English "de" - German "es" - Spanish	String
password	Password for the contact. You can generate the encrypted value by running: openssl passwd -apr1 <password>	String
realm	The realm of the contact. Normally, this is 'local' or 'ldap'	String
shared_notification_profiles	List of shared notification profiles that the contact is subscribed to	Array of strings
tips	Controls if pop-up help windows appear when navigating new areas	Boolean
variables	List of contact variables that the contact uses	Array of hashes

Examples

opsview_contact{'example-contact':
  description => 'Java developer',
  full_name => 'John Smith',
  homepage_id => '2',
  language => 'en',
  password => '$apr1$ADd0/BNL$XVPQgWENB6Bzg/M4QEZe20',
  realm => 'local',
  shared_notification_profiles => ['on-call'],
  tips => true,
  variables => [
                 {'name' => 'EMAIL', 'value' => 'your@email.com'},
                 {'name' => 'RSS_COLLAPSED', 'value' => '1'},
                 {'name' => 'RSS_MAXIMUM_AGE', 'value' => '1440'},
                 {'name' => 'RSS_MAXIMUM_ITEMS', 'value' => '30'}
  ]

opsview_hashtag

Property	Description	Type
all_hosts	Globally tag all hosts with this hashtag	Boolean
all_servicechecks	Globally tag all service checks with this hashtag	Boolean
description	Provides a description for the hashtag	String
exclude_handled	Do not consider handled service checks when calculating the overall hashtag state	Boolean
hosts	List of hosts to tag	Array of strings
public	Whether the hashtag is public (can view without logging in to Opsview)	Boolean
servicechecks	List of service checks to tag	Array of strings
show_contextual_menus	Whether to display contextual menus	Boolean
style	Display style for the hashtag detail view. Available values: group_by_host group_by_service host_summary errors_and_host_cells performance	String
visible	Whether the hashtag is included on the status pages or not	Boolean

 

Examples

opsview_hashtag{'example-hashtag':
  all_hosts => false,
  all_servicechecks => true,
  description => 'My Opsview service checks',
  exclude_handled => true,
  hosts => ['opsview'],
  servicechecks => [],
  show_contextual_menus => true,
  style => "group_by_host",
  visible => true
}

opsview_hashtag{'example-hashtag':
  all_hosts => true,
  all_servicechecks => false,
  description => 'MySQL checks',
  servicechecks => ['MySQL DB Listener','MySQL DB Processes']
}

opsview_hostcheckcommand

Property	Description	Type
arguments	The plugin arguments	String
plugin	The plugin to use	String

Examples

opsview_hostcheckcommand{'example-hostcheckcommand':
  plugin => 'check_icmp',
  arguments => '-H $HOSTADDRESS$'
}

opsview_hostgroup

Property	Description	Type
parent	The parent host group	String

Examples

opsview_hostgroup{'example-hostgroup1':}

opsview_hostgroup{'example-hostgroup2':
  parent => 'example-hostgroup1'
}

opsview_host

Property	Description	Type
check_attempts	The number of check attempts to use when running the host check for the host	String
check_command	The name of the host check command to run	String
check_interval	How often to run the host check	String
check_period	The name of the check period to use	String
Description	Provides a description of the host	String
enable_rancid	Whether to enable the RANCID (Netaudit) module	Boolean
enable_snmp	Whether to enable SNMP	Boolean
event_handler	The name of the event handler to run when the host check changes state	String
event_handler_always_execute	Whether to enable 'always execute' for event handlers	Boolean
flap_detection	Whether flap detection is enabled	Boolean
hashtags	List of hashtags to tag against the host	Array of strings
hostgroup	Name of the host group to put the host in	String
hosttemplates	List of host templates to apply to the host	Array of strings
icon	The host icon to use	String
ip	The address or hostname of the host	String
monitored_by	The name of the monitoring server that the host uses	String
notification_options	Defines which states are allowed to notify for host notifications. Format is a comma-separated list of the letters d, u, r, or f d - DOWN u - UNREACHABLE r - RECOVERY f - FLAPPING	String
notification_period	The name of the notification period to use	String
other_addresses	List of additional IP addresses that the host has. Format is a comma-separated list of IP addresses	String
parents	List of parents for the host	Array of strings
rancid_autoenable	Whether to set 'autoenable' mode for RANCID	Boolean
rancid_connection_type	The connection method for RANCID. Values are: ssh telnet	String
rancid_password	Password for the RANCID user. You can generate the encrypted value by running: opsview_crypt	String
rancid_username	The RANCID user to connect as	String
rancid_vendor	Name of the RANCID vendor to use Values are: AGM Alteon Baynet Cat5 Cisco Ellacoya Enterasys ERX Extreme EZT3 Force10 Foundry Hitachi HP Juniper MRTD Netscaler Netscreen Procket Redback Riverstone SMC TNT Zebra	String
renotification_interval	How often to resend alerts. Format is [NUMBER1][UNIT1] [NUMBER2][UNIT2] .. [NUMBERn][UNITn] where UNIT can be s (seconds), m (minutes), h (hours), or d (days)	String
retry_check_interval	How long to wait before attempting a host check again	String
servicechecks	The service checks to set for the host. This includes options for setting event handlers, exceptions, and timed exceptions. If you aren't interested in setting event handlers, exceptions, or timed exceptions, you can simply supply a string with the name of the service check. ['servicecheck1','servicecheck2'] To set the advanced fields, you will need to make use of a hash as seen below: { name => 'SERVICECHECKNAME', 'event_handler' => 'EVENTHANDLERNAME', 'exception' => 'EXCEPTIONARGUMENTS', 'timed_exception' => { 'args' => 'TIMEDEXCEPTIONARGUMENTS', 'timeperiod' => { 'name' => 'TIMEPERIODNAME'} } } These two different types can be combined: [ 'Connectivity - LAN', { name => 'HTTP', 'event_handler' => 'eventhandler.sh', 'exception' => '-H www.opsview.com -S', 'timed_exception' => { 'args' => '-H www.google.com', 'timeperiod' => { 'name' => 'example-exception-timeperiod'} } } ]	Array of strings and/or Array of hashes
snmp_community	Community string for the device. You can generate the encrypted value by running: opsview_crypt	String
snmp_extended_throughput_data		Boolean
snmp_interfaces	List of SNMP interfaces to monitor. This includes the thresholds for throughput, errors, and discards. Note: The default thresholds are set using an interface name of "" Note: Setting a threshold value to '-' will disable it and "" will use the default value. Example input: [ {"interface" => "", "enabled" => "0", "throughput_warning" => "-", "throughput_critical" => "0:75%", "errors_warning" => "-", "errors_critical" => "10", "discards_warning" => "-", "discards_critical" => "10" }, {"interface"=>"Serial0/0", "enabled"=>"1", "throughput_warning"=>"", "throughput_critical" => "", "errors_warning" => "", "errors_critical" => "", "discards_warning" => "", "discards_critical" => "" } ]	Array of hashes
snmp_message_size	The SNMP message size. Might need to be increased for certain devices to work properly. Values can be: default 1Kio 2Kio 4Kio 8Kio 16Kio 32Kio 64Kio	String
snmp_port	UDP port for SNMP communication	String
snmp_use_getnext		Boolean
snmp_use_ifname		Boolean
snmp_version	Version of SNMP to use. Values can be: 1 2c 3	String
snmp_ifdescr_level	Tidy up the interface names based on level - higher numbers tidy up more. Values can be: off 0 1 2 3 4 5 6	String
snmpv3_authentication_password	Password for SNMPv3 authentication. You can generate the encrypted value by running: opsview_crypt	String
snmpv3_authentication_protocol	Protocol was SNMPv3 authentication. Values can be: md5 sha	String
snmpv3_privacy_password	Password for SNMPv3 privacy. Values can be: des aes aes128	String
snmpv3_username	The SNMPv3 user to connect as	String
variables	Sets the host variables to use. Example syntax: [ { 'name' => 'NAME_OF_VARIABLE1', 'value' => 'VALUE', 'arg1' => 'ARGUMENT1 VALUE', 'arg2' => 'ARGUMENT2_VALUE', 'arg3' => 'ARGUMENT3_VALUE', 'arg4' => 'ARGUMENT4_VALUE'}, { 'name' => 'NAME_OF_VARIABLE2', 'value' => 'VALUE', 'arg1' => 'ARGUMENT1 VALUE', 'arg2' => 'ARGUMENT2_VALUE', 'arg3' => 'ARGUMENT3_VALUE', 'arg4' => 'ARGUMENT4_VALUE'} ] For encrypted fields, you can change 'argX' to 'encrypted_argX' and supply the value with an encrypted string that can be generated using opsview_crypt	Array of hashes

Examples

 opsview_host{'example-host':
  ip => 'localhost',
  other_addresses => '127.0.0.1',
  hostgroup => 'Opsview',
  icon => 'LOGO - Linux Penguin',
  hosttemplates => ['Network - Base', 'OS - Unix Base'],
  servicechecks => ['Opsview Application Status'],
  check_command => 'ping',
  check_attempts => 2,
  check_period => '24x7',
  notification_period => '24x7',
  check_interval => '5m',
  renotification_interval => '60m',
  retry_check_interval => '10m',
  parents => ['opsview'],
  variables => [ 
                 {"name" => "DISK", "value" => "/" },
                 {"name" => "DISK", "value" => "/tmp", "arg1" => "-w 3% -c 1%"}
               ]  
}

opsview_hosttemplate

Property	Description	Type
description	Describes what the host template is for	String
hosts	List of hosts to include as part of the template	Array of strings
management_urls	List of management URL's. Format for the hash is: { 'name' => 'URLNAME', 'url' => 'URL ADDRESs' } i.e. { 'name' => 'Web console', 'url' => 'http://$HOSTADDRESS$' }	Array of hashes
servicechecks	The service checks to set for the host. This includes options for setting event handlers, exceptions, and timed exceptions. If you aren't interested in setting event handlers, exceptions, or timed exceptions, you can simply supply a string with the name of the service check. ['servicecheck1','servicecheck2'] To set the advanced fields, you will need to make use of a hash as seen below: { name => 'SERVICECHECKNAME', 'event_handler' => 'EVENTHANDLERNAME', 'exception' => 'EXCEPTIONARGUMENTS', 'timed_exception' => { 'args' => 'TIMEDEXCEPTIONARGUMENTS', 'timeperiod' => { 'name' => 'TIMEPERIODNAME'} } } These two different types can be combined: [ 'Connectivity - LAN', { name => 'HTTP', 'event_handler' => 'eventhandler.sh', 'exception' => '-H www.opsview.com -S', 'timed_exception' => { 'args' => '-H www.google.com', 'timeperiod' => { 'name' => 'example-exception-timeperiod'} } } ]	Array of hashes

opsview_notificationmethod

Property	Description	Type
active	Whether the notification method is enabled or not	Boolean
command	The name of the script to run and any additional arguments	String
run_on_master	Whether the notification method should run on the master or not	Boolean
user_variables	List of user variables to use for the notification method	Array of strings

 

Examples

 opsview_notificationmethod{'example-notificationmethod':
  active => true,
  command => 'notify_by_email',
  run_on_master => true,
  user_variables => ['EMAIL']
}

opsview_notificationprofile

Note: The format for the name of a notification profile is 'CONTACTNAME|PROFILENAME'

Property	Description	Type
all_business_components	Whether to notify for all BSM components	Boolean
all_business_services	Whether to notify for all BSM services	Boolean
all_hostgroups	Whether to notify for all host groups	Boolean
all_hashtags	Whether to notify for all hashtags	Boolean
all_servicegroups	Whether to notify for all service groups	Boolean
business_component_availability_below	Threshold value for component availability	String
business_component_notification_options	Defines which states are allowed to notify for BSM component notifications. Format is a comma-separated list of the letters f, i, a, or r f - FAILED i - IMPACTED a - AVAILABILITY BELOW r - RECOVERY	String
business_component_renotification_interval	How often to resend BSM component alerts. Format is [NUMBER1][UNIT1] [NUMBER2][UNIT2] .. [NUMBERn][UNITn] where UNIT can be s (seconds), m (minutes), h (hours), or d (days)	String
business_services	List of business services	Array of strings
business_service_availability_below	Threshold value for component availability	String
business_service_notification_options	Defines which states are allowed to notify for BSM component notifications. Format is a comma-separated list of the letters o, i, a, or r o - OFFLINE i - IMPACTED a - AVAILABILITY BELOW r - RECOVERY	String
business_service_renotification_interval	How often to resend BSM service alerts. Format is [NUMBER1][UNIT1] [NUMBER2][UNIT2] .. [NUMBERn][UNITn] where UNIT can be s (seconds), m (minutes), h (hours), or d (days)	String
hashtags	List of hashtags to notify for	Array of strings
hostgroups	List of host groups to notify for	Array of strings
host_notification_options	Defines which states are allowed to notify for host notifications. Format is a comma-separated list of the letters d, u, r, or f d - DOWN u - UNREACHABLE r - RECOVERY f - FLAPPING	String
include_component_notes	Whether to include component notes in the notification	Boolean
include_service_notes	Whether to include service notes in the notification	Boolean
notification_methods	List of notification methods to use	Array of strings
notification_period	Name of the time period to use for notifications	String
send_from_alert	When to start sending alerts. A value of "1" means right from the first alert.	String
servicegroups	List of service groups to notify for	Array of strings
service_notification_options	Defines which states are allowed to notify for host notifications. Format is a comma-separated list of the letters w, r, u, c, or f w - WARNING r - RECOVERY u - UNKNOWN c - CRITICAL f - FLAPPING	String
stop_after_alert	When to stop receiving alerts. A value of "0" means never.	String

Examples

 opsview_notificationprofile{'admin|Working Hours':
  notification_period => 'workhours',
  host_notification_options => 'd,u,r,f',
  service_notification_options => 'w,c,f,r,u',
  all_hostgroups => true,
  all_servicegroups => true,
  notification_methods => ['Email', 'RSS']
}

opsview_role

Property	Description	Type
access	List of accesses for the role	Array of strings
all_bsm_components	Whether the role can access BSM components	Boolean
all_bsm_edit	Whether the role can edit BSM	Boolean
all_bsm_view	Whether the role can view all BSM services	Boolean
all_hostgroups	Whether the role can view all host groups	Boolean
all_hashtags	Whether the role can view all hashtags	Boolean
all_monitoringservers	Whether the role can configure hosts to use all monitoring servers	Boolean
all_servicegroups	Whether the role can view all service groups	Boolean
business_services	List of business services that the role can access. You can also specify if the role can edit them. Example of a business_service hash: {'name' => 'Company Website', 'edit' => "true"},{'name' => 'Sales', 'edit' => "false"}	Array of hashes
configure_hostgroups	List of host groups that the role can configure.	Array of strings
hostgroups	List of host groups that the role can view	Array of strings
monitoring_servers	List of monitoring servers that the role can configure	Array of strings
servicegroups	List of service groups that the role can view	Array of strings
tenancy	Name of the tenancy associated with the role	String

Examples

 opsview_role{'example-role':
  all_hostgroups => false,
  all_servicegroups => true,
  all_hashtags => false,
  all_monitoringservers => true,
  access => ['VIEWALL','TESTALL','BSM','CONFIGUREBSM'],
  hostgroups => ['Monitoring Servers','Opsview'],
  configure_hostgroups => ['opsview'],
  servicegroups => ['Application - Alfresco','Application - Apache HTTP Server','Service Provider - Amazon'],
  hashtags => ['example-hashtag','example-public-hashtag'],
  business_services => [
                         {'name' => 'Company Website', 'edit' => "true"},
                         {'name' => 'Sales', 'edit' => "false"}
                       ]
}

opsview_servicecheck

Property	Description	Type	Check type
alert_from_failure	Selects the behavior for dealing with service check alerts.   Values can be: disable enable enable with re-notification interval or 0 1 2 0 is "disabled", 1 is "enabled", and 2 is "enable with re-notification interval"	String	All
arguments	Specifies the plugin arguments	String	Active
cascaded_from	Specifies the name of an active service check that populates the passive check value. This is used when "re-checking" a passive check.	String	Passive
checktype	The type of service check. Values can be: Active Plugin Passive SNMP Polling SNMP trap	String	N/A
check_freshness	Whether to check the freshness of the service check	Boolean	Passive, SNMP trap
check_interval	How often to run the service check	String	Active, SNMP Polling
check_period	The time period to use when running the service check	String	Active, SNMP Polling
dependencies	List of service checks that this service check depends on	Array of strings	All
description	Description of the service check	String	All
event_handler	The name of the event handler to run when the service check changes state	String	All
event_handler_always_execute	Whether to enable 'always execute' for event handlers	Boolean	All
flap_detection	Whether to enable flap detection	Boolean	All
freshness_action	Action to take when freshness_timeout has been reached. Values can be: Resend Notifications Submit Result	String	Passive, SNMP trap
freshness_status	The state to set when freshness_action is set to 'Submit Result' Values can be: WARNING CRITICAL UNKNOWN OK	String	Passive, SNMP trap
freshness_text	The text to send when freshness_action is set to 'Submit Result'	String	Passive, SNMP trap
freshness_timeout		String	Passive, SNMP trap
hashtags	List of hashtags to tag against the service check	Array of strings	All
hosttemplates	List of host templates to assign this service check to	Array of strings	All
invert_plugin_results	Whether to invert plugin results	Boolean	Active
markdown_filter	Whether to use the markdown filter	Boolean	Active
maximum_check_attempts	Maximum number of check attempts for the service check	String	Active, SNMP Polling
notification_options	Defines which states are allowed to notify for service check notifications. Format is a comma-separated list of the letters w, c, r, u , f w - WARNING c - CRITICAL u - UNKNOWN r - RECOVERY f - FLAPPING	String	All
notification_period	The time period to use for sending out notifications	String	All
record_output_changes	Whether to record output changes for service checks that do not change state	Boolean	All
renotification_interval	How long to wait before sending an additional notification	String	All
retry_check_interval	How long to wait before retrying a service check	String	Active, SNMP Polling
sensitive_arguments	Whether to hide sensitive arguments when displaying and running test checks	Boolean	Active
servicegroup	Which service group to put the service check in	String	All
snmp_critical_comparison	The comparison function to use for the critical SNMP polling threshold. Values can be: Numeric Comparison == < > separator String Comparison equals not equals regex	String	SNMP Polling
snmp_critical_value	The value to use for the SNMP polling critical threshold	String	SNMP Polling
snmp_warning_comparison	The comparison function to use for the warning SNMP polling threshold. Values can be: Numeric Comparison == < >	String	SNMP Polling
snmp_warning_value	The value to use for the SNMP polling warning threshold	String	SNMP Polling
snmp_label	The label to use for SNMP polling checks	String	SNMP Polling
snmp_oid	The OID to use for SNMP polling checks	String	SNMP Polling
snmp_trap_rules	An array of hashes that represent trap rules	Array of hashes	SNMP trap
variable	The variable to use in the service check	String	All

 

Examples

opsview_servicecheck{'Example - ActiveCheck':
  checktype => 'Active Plugin',
  plugin => 'check_nrpe',
  arguments => '-H %PUPPETVARIABLE%',
  variable => 'PUPPETVARIABLE',
  dependencies => ['Opsview Agent'],
  check_interval => '5m',
  retry_check_interval => '1m',
  maximum_check_attempts => '3',
  check_period => '',
  notification_period => '',
  renotification_interval => '',
  invert_plugin_results => false,
  sensitive_arguments => '1'
}

opsview_servicecheck{'Example - PassiveCheck':
  checktype => 'Passive',
  notification_options => 'w,c',
  event_handler => '',
  event_handler_always_execute => false,
}

opsview_servicecheck{'Example - SNMPCheck':
  checktype => 'SNMP Polling',
  hosttemplates => ['example-snmppolling'],
  notification_options => 'w,c',
  servicegroup => 'example-snmppolling',
  snmp_oid => '1.3.6',
  snmp_label => 'some_label',
  snmp_warning_comparison => '>',
  snmp_critical_comparison => equals,
  snmp_warning_value => '78',
  snmp_critical_value => '"88"'
}

opsview_servicecheck{'Example - SNMPTrap':
  checktype => 'SNMP trap',
  alert_every_failure => enable,
  hosttemplates => ['example-snmptraps'],
  freshness_action => "Submit Result",
  freshness_status => OK,
  freshness_text => 'No traps received in 10m. Reset to OK',
  freshness_timeout => '10m',
  record_output_changes => 'w,c,u',
  servicegroup => 'example-snmptraps',
  snmp_trap_rules => [
    { 'name' => 'rule 1', 'rule' => '1', 'action' => 'Send Alert', 'alert_level' => 'WARNING', 'message' => 'This is my trap'},
    { 'name' => 'rule 2', 'rule' => '1 && 1', 'action' => 'Stop Processing'}
  ]
}

opsview_servicegroup

This property only needs a name

Examples

opsview_servicegroup{'example-servicegroup':}

opsview_tenancy

Property	Description	Type
description	Provides a description for the tenancy	String
primary_role	Name of the primary role for the tenancy	String

Examples

opsview_tenancy{'example-tenancy':
  primary_role => 'View some, change none'
}

opsview_timeperiod

time periods specified in the following format:
HH:MM-HH:MM[,HH:MM-HH:MM][...] Where HH are hours specified in 24 hour format.
 
Fields may be left blank to mean no time during this day
 
The times are based on the timezone of the Opsview server
 
Examples:00:00-09:00,17:30-24:00 - Midnight to 9am, and 5:30pm to midnight 
09:00-17:30 - 9am to 5:30pm 
00:00-24:00 - a full day 

Property	Description	Type
description	Provides a description for the time period	String
sunday	Defines when the time period is active for this day	String
monday	Defines when the time period is active for this day	String
tuesday	Defines when the time period is active for this day	String
wednesday	Defines when the time period is active for this day	String
thursday	Defines when the time period is active for this day	String
friday	Defines when the time period is active for this day	String
saturday	Defines when the time period is active for this day	String

Examples

opsview_timeperiod{'example-timeperiod':
  description => 'Example Time Period',
  sunday => '00:00-24:00',
  monday => '09:00-17:00',
  tuesday => '09:00-17:00',
  wednesday => '09:00-17:00,19:00-22:15',
  thursday => '09:00-17:00',
  friday => '09:00-17:00',
  saturday => '00:00-24:00'
} 

opsview_variable

Property	Description	Type
arg1	Value for the first argument	String
arg2	Value for the second argument	String
arg3	Value for the third argument	String
arg4	Value for the fourth argument	String
encrypted_arg1	Encrypted value for the first argument. Use opsview_crypt to generate	String
encrypted_arg2	Encrypted value for the second argument. Use opsview_crypt to generate	String
encrypted_arg3	Encrypted value for the third argument. Use opsview_crypt to generate	String
encrypted_arg4	Encrypted value for the fourth argument. Use opsview_crypt to generate	String
label1	Description for the first argument	String
label2	Description for the second argument	String
label3	Description for the third argument	String
label4	Description for the fourth argument	String
secured1	Make the first argument an encrypted field	Boolean
secured2	Make the second argument an encrypted field	Boolean
secured3	Make the third argument an encrypted field	Boolean
secured4	Make the fourth argument an encrypted field	Boolean
value	Value for the value field	Boolean

 

Examples

opsview_variable{'EXAMPLE_VARIABLE':
  value => "",
  arg1 => "admin",
  encrypted_arg2 => "bdd4dcdb1375a56dff0bbe2d9ce47272b7ecc64d90737bffa5dabf6f0a87080f",
  label1 => "username",
  label2 => "password"
}