Wifi Connection

[eaudiffred]

Hello,
I'm having trouble finding the "WiFi Connect" hot spot on any device after powering up the unit. I've tried restarting the pi a few times and have checked multiple devices. It looks like the TP link adapter is not transmitting. When starting up the adapter flashes green quickly for about 3 seconds then stops completely. According to the user manual, no flashing green light means its not transmitting. Any trouble shooting ideas?

Thanks!

[keenanjohnson]

Hmmmmm that is strange @eaudiffred! Do you have an ethernet cord you could plug into the device so I can help you debug it remotely?

?

[eaudiffred]

@keenanjohnson,
I do. It's plugged in now.

Also, for reference:

• I tried both usb ports on the pi and got the same result.
• When I plugged it into my laptop, it would slow blink
• I plugged it back into the pi and restarted. I stood there and watched it for about 5min. It would randomly blink 3 or 4 times in a row every 3 min or so.

[keenanjohnson]

Thanks I can access some debug information here, so let me take a look and I'll report back! Thanks so much and sorry for the issue! - Keenan

…

On Mon, Sep 20, 2021 at 6:42 PM Eric Audiffred ***@***.***> wrote: @keenanjohnson <https://github.com/keenanjohnson>, I do. It's plugged in now. Also, for reference: - I tried both usb ports on the pi and got the same result. - When I plugged it into my laptop, it would slow blink - I plugged it back into the pi and restarted. I stood there and watched it for about 5min. It would randomly blink 3 or 4 times in a row every 3 min or so. — You are receiving this because you were mentioned. Reply to this email directly, view it on GitHub <#51 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AATQ3FX3WVXPWVECJQ7KTTTUC7PG3ANCNFSM5ENDYQFQ> .