forked from volkertb/boxv9x
-
Notifications
You must be signed in to change notification settings - Fork 0
/
readdev.txt
89 lines (65 loc) · 3.89 KB
/
readdev.txt
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
Development Notes
=================
This Windows 9x display minidriver is almost entirely written in C. It is
a 16-bit DLL running with SS != DS. The compiler switches were carefully
chosen.
The driver is compiled as small model code and although it uses some C
library functions (e.g. _fmemcpy(), _fmemset()), it does not use the C runtime
startup code at all.
An interrupt 2Fh handler is written in assembler, and so are forwarders and
thunks directing exported functions to the DIB Engine. The latter could be
written in C, but assembly is significantly more efficient and not at all
complex.
The driver is by necessity similar to Windows 95/98 DDK sample code, except
it's written almost completely in C whereas the DDK sample drivers are written
100% in assembly, in the tradition of Windows 3.x and 2.x display drivers.
Although the driver is a 16-bit DLL, it can freely use 386 instructions,
since it requires a 386 or later CPU by virtue of running on Windows 95 or
later. The driver also can and does use 32-bit registers in some situations.
The ddk subdirectory contains files which are directly derived from the
Win9x DDK. The DDK is not used or required to build this driver, although DDK
documentation is very useful in understanding the code. Note that the Windows
9x DDK documentation may not cover topics documented in the Windows 3.x DDKs.
The original DDK drivers are split into two code segments, _TEXT and _INIT.
This driver also uses those segments, but they are combined into a single
physical segment by the linker. This simplifies the code (e.g. no problem with
near calls into the C runtime) and given the small size of the driver, likely
is not at all disadvantageous overall.
Note that the driver written in C is actually smaller (about 7KB vs. 8KB)
than the assembler-only DDK sample. The C code is smarter and does not waste
space on tables full of zeros and such, enabling it to be overall smaller even
with the overhead of a higher level language.
Debug Logging
-------------
When built with DBGPRINT (e.g. wmake clean && wmake DBGPRINT=1), the driver
includes debug logging implemented as dbg_printf() function. This is a small
printf() subset with output directed to the QEMU debug port, such that
the output appears on the debug console (supply "-debugcon stdio" to QEMU).
It would be much nicer to use the C runtime printf(), but that is not at all
possible because the small model library printf() cannot operate with SS != DS
and is thus unusable, even if all other, less showstopping problems were
overcome.
See driver code for dbg_printf() usage examples.
Building with Open Watcom 1.9
-----------------------------
The driver source was slightly adapted so that it builds with the released
Open Watcom C/C++ 1.9 compiler.
The only real issue is that the ms2wlink utility shipped with Open Watcom
version 1.9 cannot correctly process boxv9x.def, and therefore a working
boxv9x.lnk file is supplied.
The build process was only tested on Windows 10 hosts. It should work,
possibly with minor adaptations, on other platforms as well. That includes
Windows 9x hosts.
The step of building a floppy image is optional and requires the mkimage
utility (part of the OS/2 Museum's fdimg project) which is not included.
Replacing Active Driver
-----------------------
Once the boxvmini.drv driver is installed, it cannot be replaced while
Windows 9x is running because the file is locked. It can be replaced in safe
mode or command line boot (F8 key early in Win9x startup).
It can also be replaced by shutting down Windows 9x (not Windows Me) to
MS-DOS compatibility mode, copying over boxvmini.drv to the WINDOWS\SYSTEM
directory, and exiting back to Windows.
It is always possible to use the driver update dialog to install a rebuilt
driver, but that requires more clicking and Windows must be restarted
anyway.