Respeaker 2mic Raspberry Pi 3b+

[lillianames]

Clean install of Stretch os on 64gb fat32 sd card.
All mic_hat tests run.
Alexa is idle.
Arecord -l shows seeed-voicecard.
Aplay -l also shows seeed-voicecard.
Sample avs running in terminal, doesn't respond to voice, no sound produced.
Help me solve this puzzle.

[xiongyihui]

Can you try the customized pi image https://v2.fangcloud.com/share/7395fd138a1cab496fd4792fe5?folder_id=188000207913

[lillianames]

I used this website http://www.makerspace-uk.co.uk/respeaker-2-mics-pi-hat/ and it still doesn't work so I'll look at what you sent me tomorrow.

…

On Wed, Nov 21, 2018, 9:36 PM Yihui Xiong ***@***.*** wrote: Can you try the customized pi image https://v2.fangcloud.com/share/7395fd138a1cab496fd4792fe5?folder_id=188000207913 — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#8 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ArC0SF3K1quUm9h9D5Q6KyvqAp9t6HoDks5uxjf1gaJpZM4YnwTe> .

[lillianames]

That image is a bit outdated. I hit similar error messages from downloading the seeed voicecard master file and installing. I got farther with the previous os I was working on using the maker's space website. Let me know when you update your image.

…

On Wed, Nov 21, 2018, 9:45 PM Lillian Ames ***@***.*** wrote: I used this website http://www.makerspace-uk.co.uk/respeaker-2-mics-pi-hat/ and it still doesn't work so I'll look at what you sent me tomorrow. On Wed, Nov 21, 2018, 9:36 PM Yihui Xiong ***@***.*** wrote: > Can you try the customized pi image > https://v2.fangcloud.com/share/7395fd138a1cab496fd4792fe5?folder_id=188000207913 > > — > You are receiving this because you authored the thread. > Reply to this email directly, view it on GitHub > <#8 (comment)>, > or mute the thread > <https://github.com/notifications/unsubscribe-auth/ArC0SF3K1quUm9h9D5Q6KyvqAp9t6HoDks5uxjf1gaJpZM4YnwTe> > . >

[EliseoCesco]

I also have this card, I see that the 3.5mm jack input has 4 pins, can I also use headphones / earphones? Or use the microphone built into the earphones? and how eventually? THANK YOU

[lillianames]

Once the drivers are installed, set the audio in and out to seeedcard. Once set as the dedicated sound card the 3.5mm jack can be used with headphones or speaker. Also the sell 8ohm speakers that can be plugged into the socket near the i2c and gpi2 ports.

…

On Wed, Jun 24, 2020, 9:47 PM EliseoCesco ***@***.***> wrote: I also have this card, I see that the 3.5mm jack input has 4 pins, can I also use headphones / earphones? Or use the microphone built into the earphones? and how eventually? THANK YOU — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#8 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AKYLISHZUJNP5OYFYNV2SNTRYLJFPANCNFSM4GE7ATPA> .