Skip to content

Latest commit

 

History

History
169 lines (130 loc) · 7.33 KB

CHANGELOG.md

File metadata and controls

169 lines (130 loc) · 7.33 KB
Raw

CHANGELOG

0.8.0 - 2021-08-03

Requires libfranka >= 0.8.0

  • franka_hw, franka_combinable_hw, franka_combined_hw: Added service interface to disconnect and reconnect when no controller is active. This allows mixing FCI- and DESK-based application without stopping the according hardware nodes.
  • BREAKING franka_hw, franka_combinable_hw method control() now is non-const to allow locking a mutex member variable.
  • BREAKING Change behavior of franka_msgs/SetEEFrame. Previously, this method would set the flange-to-end-effector transformation F_T_EE. This has been split up into two transformations: F_T_NE, only settable in Desk, and NE_T_EE, which can be set in franka_ros with SetEEFrame and defaults to the identity transformation.
  • Add F_T_NE and NE_T_EE to franka_msgs/FrankaState.
  • Franka Gazebo Integration: Now you can simulate Panda robots in Gazebo including:
    • gravity compensation
    • non-realtime commands like setEEFrame or setLoad
    • gripper simulation with the same action interface as franka_gripper
    • estimated inertias in the URDF
    • no need to change existing ROS controllers
    • only torque control supported in this version
  • Extract Model Library in abstract base class interface. This allows users to implement their own model.
  • BREAKING Remove panda_arm_hand.urdf.xacro. Use panda_arm.urdf.xacro hand:=true instead.

0.7.1 - 2020-10-22

Requires libfranka >= 0.7.0

  • franka_example_controllers: Added example for dual-arm teleoperation based on franka_combinable_hw.
  • franka_gripper: Made stopping on shutdown optional.
  • franka_hw: Added franka_control_services install instruction.

0.7.0 - 2020-07-15

Requires libfranka >= 0.7.0

  • BREAKING moved services and action from franka_control to franka_msgs.
  • BREAKING moved Service container from franka_control to franka_hw.
  • franka_example_controllers: Added example for dual-arm control based on franka_combinable_hw.
  • franka_description :
    • Added an example urdf with two panda arms.
    • BREAKING Updated collision volumes.
    • Removed invalid axis for joint8.
  • franka_hw:
    • Added hardware classes to support torque-controlling multiple robots from one controller.
    • Refactored FrankaHW class to serve as base class (e.g. for FrankaCombinableHW).
    • Added joint limits checking to FrankaHW which means parameterized warning prints when approaching limits.
    • Made initial collision behavior a parameter.
    • Added default constructor and init method to FrankaHW.
    • BREAKING moved parsing of parameters from control node to FrankaHW::init.
    • BREAKING made libfranka robot a member of FrankaHW.
    • Added missing return value to franka::ControllerMode stream operator function.
  • franka_control:
    • Added control node that can runs a FrankaCombinedHW to control mulitple Pandas.
    • Publish whole libfranka franka::RobotState in franka_state_controller.
  • franka_example_controllers:
    • Cartesian impedance example controller: Interpolate desired orientations with slerp and change orientation error to quaternion.
  • BREAKING Moved panda_moveit_config to ros-planning.
  • Added support for ROS Melodic Morenia.
  • Raised minimum CMake version to 3.4 to match libfranka.
  • Add rosparam to choose value of franka::RealtimeConfig.
  • Fix unused parameter bugs in FrankaModelHandle (#78).
  • Added (experimental) support for ROS Noetic Ninjemys.

0.6.0 - 2018-08-08

Requires libfranka >= 0.5.0

  • BREAKING Fixes for MoveIt, improving robot performance:
    • Fixed joint velocity and acceleration limits in joint_limits.yaml
    • Use desired joint state for move group
  • BREAKING Updated joint limits in URDF
  • BREAKING Fixed velocity, acceleration and jerk limits in franka_hw
  • BREAKING Start franka_gripper_node when giving load_gripper:=true to franka_control.launch
  • Allow to configure rate limiting, filtering and internal controller in franka_control_node
  • BREAKING FrankaHW::FrankaHW takes additional parameters.
  • BREAKING Enabled rate limiting and low-pass filtering by default (franka_control_node.yaml)
  • Publish desired joint state in /joint_state_desired
  • Removed effort_joint_trajectory_controller from default_controllers.yaml
  • Fixed a bug when switching between controllers using the same libfranka interface

0.5.0 - 2018-06-28

Requires libfranka >= 0.4.0

  • BREAKING Updated URDF:
    • Adjusted maximum joint velocity
    • Updated axis 4 hard and soft limits

0.4.1 - 2018-06-21

Requires libfranka >= 0.3.0

  • Added some missing includes to franka_hw
  • Add support for commanding elbow in Cartesian pose and Cartesian velocity interfaces

0.4.0 - 2018-03-26

Requires libfranka >= 0.3.0

  • BREAKING Removed arm_id and default robot_ip from launchfiles
  • BREAKING Changed namespace of franka_control controller manager
  • BREAKING Changed behavior of gripper_action for compatibility with MoveIt
  • Changes in panda_moveit_config:
    • Updated joint limits from URDF
    • Removed home poses
    • Fixed fake execution
    • Add load_gripper argument (default: true) to panda_moveit.launch
    • Conditionally load controllers/SRDFs based on load_gripper
    • Add gripper controller configuration (requires running franka_gripper_node)
  • Added mimic tag for gripper fingers to URDF and fixed velocity limits

0.3.0 - 2018-02-22

Requires libfranka >= 0.3.0

  • BREAKING Changed signatures in franka_hw::FrankaModelHandle
  • BREAKING Added epsilon parameters to franka_gripper/Grasp action
  • Added Collada meshes for Panda and Hand
  • Added missing dependencies to panda_moveit_config and franka_example_controllers
  • Fixed linker errors when building with -DFranka_DIR while an older version of ros-kinetic-libfranka is installed
  • Added gripper joint state publisher to franka_visualization
  • Moved move_to_start.py example script to franka_example_controllers

0.2.2 - 2018-01-31

Requires libfranka >= 0.2.0

  • Catkin-related fixes for franka_example_controllers
  • Added missing <build_export_depend> for message_runtime

0.2.1 - 2018-01-30

Requires libfranka >= 0.2.0

  • Added missing dependency to franka_example_controllers
  • Lowered rotational gains for Cartesian impedance example controller

0.2.0 - 2018-01-29

Requires libfranka >= 0.2.0

  • Added missing run-time dependencies to franka_description and franka_control
  • Added tau_J_d, m_ee, F_x_Cee, I_ee, m_total, F_x_Ctotal, I_total, theta and dtheta to franka_msgs/FrankaState
  • Added new errors to franka_msgs/Errors
  • Updated and improved examples in franka_example_controllers
  • Fixed includes for Eigen3 in franka_example_controllers
  • Fixed gripper state publishing in franka_gripper_node

0.1.2 - 2017-10-10

  • Fixed out-of-workspace build

0.1.1 - 2017-10-09

  • Integrated franka_description as subdirectory
  • Fixed dependencies on libfranka
  • Fixed RViz config file paths
  • Added missing test_depend to franka_hw
  • Added missing CMake install rules

0.1.0 - 2017-09-15

  • Initial release