diff --git a/README.md b/README.md
index c432a24..11cf939 100644
--- a/README.md
+++ b/README.md
@@ -23,34 +23,35 @@ The current week is shown below. There are 3 major sections:
 
 ```mermaid
 pie
-    "tscircuit/builder" : 6
-    "tscircuit/cli" : 3
-    "tscircuit/easyeda-converter" : 3
+    "tscircuit/builder" : 7
     "tscircuit/pcb-viewer" : 3
+    "tscircuit/bunaider" : 4
     "tscircuit/props" : 5
-    "tscircuit/jscad-electronics" : 4
-    "tscircuit/jscad-fiber" : 7
     "tscircuit/checks" : 5
+    "tscircuit/cli" : 3
+    "tscircuit/easyeda-converter" : 3
     "tscircuit/soup" : 3
+    "tscircuit/soup-util" : 1
+    "tscircuit/jscad-electronics" : 4
+    "tscircuit/jscad-fiber" : 8
     "tscircuit/footprinter" : 1
     "tscircuit/plop" : 1
-    "tscircuit/soup-to-svg" : 5
-    "tscircuit/bunaider" : 1
+    "tscircuit/circuit-to-svg" : 5
     "tscircuit/schematic-viewer" : 1
-    "tscircuit/circuit-to-png" : 4
+    "tscircuit/circuit-to-png" : 7
 ```
 
 ## Contributor Overview
 
 | Contributor | 🐳 Major | 🐙 Minor | 🐌 Tiny |
 |-------------|-------|-------|-------|
-| andrii-balitskyi | 4 | 2 | 0 |
-| seveibar | 11 | 11 | 0 |
-| imrishabh18 | 8 | 3 | 0 |
-| tscircuitbot | 2 | 1 | 0 |
+| tscircuitbot | 3 | 2 | 0 |
+| andrii-balitskyi | 4 | 1 | 0 |
+| seveibar | 14 | 10 | 1 |
+| imrishabh18 | 9 | 3 | 2 |
 | DamilolaAlao | 0 | 1 | 0 |
 | syedbarimanjan | 0 | 0 | 1 |
-| Slaviiiii | 4 | 1 | 0 |
+| Slaviiiii | 5 | 1 | 0 |
 | r-bt | 2 | 0 | 1 |
 
 ## Changes by Repository
@@ -59,222 +60,245 @@ pie
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#82](https://github.com/tscircuit/builder/pull/82) | 🐳 Major | andrii-balitskyi | Set the `y` coordinate of `cad_component` to `180` when it's on the bottom layer. |
-| [#84](https://github.com/tscircuit/builder/pull/84) | 🐳 Major | seveibar | Add a GitHub Actions workflow to automatically fix issues labeled as 'aider' |
-| [#80](https://github.com/tscircuit/builder/pull/80) | 🐳 Major | seveibar | The pull request handles PCB routes when finding the center of bounds, and also handles the case when there are no available points in the bounds. |
+| [#85](https://github.com/tscircuit/builder/pull/85) | 🐳 Major | tscircuitbot | Adds a `routingDisabled` option to the `GroupBuilder` class, which allows disabling the generation of PCB traces and vias. |
+| [#82](https://github.com/tscircuit/builder/pull/82) | 🐳 Major | andrii-balitskyi | Set the `y` coordinate of the `cad_component` to `180` when it's on the bottom layer. |
+| [#84](https://github.com/tscircuit/builder/pull/84) | 🐳 Major | seveibar | Add a GitHub Actions workflow for the "bunaider" tool to automatically fix issues labeled with "aider" |
+| [#80](https://github.com/tscircuit/builder/pull/80) | 🐳 Major | seveibar | Handle PCB routes when finding the center of bounds, and handle cases where there are no available points in the bounds. |
 | [#81](https://github.com/tscircuit/builder/pull/81) | 🐙 Minor | seveibar | Adds a new function `buildPcbTraceElements` to the library for exporting PCB trace elements for benchmarking. |
-| [#79](https://github.com/tscircuit/builder/pull/79) | 🐙 Minor | seveibar | Adds support for `pcbX` and `pcbY` properties in the `<board />` component, deprecating the use of `center_x`, `center_y`, and `center`. |
-| [#78](https://github.com/tscircuit/builder/pull/78) | 🐙 Minor | seveibar | Add a development guide for the `@tscircuit/builder` library, including instructions on running tests and making changes. |
+| [#79](https://github.com/tscircuit/builder/pull/79) | 🐙 Minor | seveibar | Adds support for `pcbX` and `pcbY` properties in the `<board />` component, which can be used instead of the deprecated `center_x`, `center_y`, and `center` properties. |
+| [#78](https://github.com/tscircuit/builder/pull/78) | 🐙 Minor | seveibar | Add a development guide for the `@tscircuit/builder` library, including information on running tests and the process for addressing issues. |
 
-### [tscircuit/cli](https://github.com/tscircuit/cli)
+### [tscircuit/pcb-viewer](https://github.com/tscircuit/pcb-viewer)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#107](https://github.com/tscircuit/cli/pull/107) | 🐳 Major | andrii-balitskyi | Add biome and formatbot workflow |
-| [#108](https://github.com/tscircuit/cli/pull/108) | 🐳 Major | andrii-balitskyi | Ensure that .npmignore is read when publishing packages to include or exclude files. |
-| [#111](https://github.com/tscircuit/cli/pull/111) | 🐙 Minor | DamilolaAlao | Add a new command "go" to open the TSCircuit Getting Started tutorial in the browser. |
+| [#30](https://github.com/tscircuit/pcb-viewer/pull/30) | 🐳 Major | tscircuitbot | Add support for displaying error diamonds at error location |
+| [#28](https://github.com/tscircuit/pcb-viewer/pull/28) | 🐳 Major | seveibar | Add npm build workflow and fix build error |
+| [#26](https://github.com/tscircuit/pcb-viewer/pull/26) | 🐙 Minor | seveibar | Update deprecated builder import to soup |
 
-### [tscircuit/easyeda-converter](https://github.com/tscircuit/easyeda-converter)
+### [tscircuit/bunaider](https://github.com/tscircuit/bunaider)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#35](https://github.com/tscircuit/easyeda-converter/pull/35) | 🐳 Major | andrii-balitskyi | Ensure that the model object URL resolves when generating TypeScript components. |
-| [#34](https://github.com/tscircuit/easyeda-converter/pull/34) | 🐙 Minor | andrii-balitskyi | Make `SMT` and `jlcOnSale` properties optional in `EasyEdaJsonSchema`. |
-| [#33](https://github.com/tscircuit/easyeda-converter/pull/33) | 🐙 Minor | andrii-balitskyi | When specifying `-t tsx`, the base component filename is now derived from the manufacturer part number instead of the input file name. |
+| [#10](https://github.com/tscircuit/bunaider/pull/10) | 🐳 Major | tscircuitbot | Fix for issue #7 by creating a pull request and commenting on the original issue. |
+| [#11](https://github.com/tscircuit/bunaider/pull/11) | 🐳 Major | seveibar | Fixes scanning of pull request comments using the Octokit library by adding support for fetching review comments and reviews. |
+| [#9](https://github.com/tscircuit/bunaider/pull/9) | 🐳 Major | seveibar | Allow bunaider to respond to comments on PRs |
+| [#4](https://github.com/tscircuit/bunaider/pull/4) | 🐌 Tiny | seveibar | Update the version in the CLI program to use the version from the package.json file. |
 
-### [tscircuit/pcb-viewer](https://github.com/tscircuit/pcb-viewer)
+### [tscircuit/props](https://github.com/tscircuit/props)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#28](https://github.com/tscircuit/pcb-viewer/pull/28) | 🐳 Major | seveibar | Add a new GitHub workflow to build the project on push and pull request events and fix a build issue in the `edit-events.ts` file. |
-| [#30](https://github.com/tscircuit/pcb-viewer/pull/30) | 🐳 Major | tscircuitbot | Add support for displaying error diamonds at error location |
-| [#26](https://github.com/tscircuit/pcb-viewer/pull/26) | 🐙 Minor | seveibar | The pull request fixes a deprecated import of `@tscircuit/builder` and replaces it with `@tscircuit/soup`. |
+| [#12](https://github.com/tscircuit/props/pull/12) | 🐳 Major | seveibar | Add a GitHub workflow to automatically fix issues labeled as 'aider' |
+| [#13](https://github.com/tscircuit/props/pull/13) | 🐙 Minor | tscircuitbot | Add an optional `routingDisabled` property to the `GroupProps` type. |
+| [#10](https://github.com/tscircuit/props/pull/10) | 🐙 Minor | seveibar | Add a GitHub Actions workflow to automatically format code in pull requests. |
+| [#8](https://github.com/tscircuit/props/pull/8) | 🐙 Minor | seveibar | Make `pinLabels` and `schPortArrangement` optional in the component props |
+| [#9](https://github.com/tscircuit/props/pull/9) | 🐙 Minor | imrishabh18 | Add a new manufacturer part number field to the `bugProps` interface. |
 
-### [tscircuit/props](https://github.com/tscircuit/props)
+### [tscircuit/checks](https://github.com/tscircuit/checks)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#12](https://github.com/tscircuit/props/pull/12) | 🐳 Major | seveibar | Add a GitHub workflow to automatically fix issues labeled as 'aider' using the bunaider tool. |
-| [#10](https://github.com/tscircuit/props/pull/10) | 🐳 Major | seveibar | Add a GitHub Actions workflow to automatically format code in pull requests. |
-| [#8](https://github.com/tscircuit/props/pull/8) | 🐙 Minor | seveibar | Make `pinLabels` and `schPortArrangement` optional properties in the component builder. |
-| [#9](https://github.com/tscircuit/props/pull/9) | 🐙 Minor | imrishabh18 | Add manufacturer part number to the `bugProps` component in the TypeScript code. |
-| [#13](https://github.com/tscircuit/props/pull/13) | 🐙 Minor | tscircuitbot | Adds a new `routingDisabled` option to the `GroupProps` type. |
+| [#6](https://github.com/tscircuit/checks/pull/6) | 🐳 Major | seveibar | The pull request fixes a bug in the `tracesOverlap` function by returning the intersection point instead of just a boolean value. |
+| [#5](https://github.com/tscircuit/checks/pull/5) | 🐳 Major | seveibar | Add a hack to allow missing `start_pcb_port_ids` and `end_pcb_port_ids` to not break overlap testing when a trace only contains two ports. |
+| [#4](https://github.com/tscircuit/checks/pull/4) | 🐳 Major | seveibar | This pull request fixes a bug in the `check-each-pcb-trace-non-overlapping.ts` file by ensuring that the `start_pcb_port_id` and `end_pcb_port_id` properties are correctly added to the `PCBTrace` objects if they are missing. It also adds a regression test case to ensure the fix works as expected. |
+| [#3](https://github.com/tscircuit/checks/pull/3) | 🐳 Major | seveibar | Implement nonoverlapping checks, add NetManager system for detecting connected traces, and add workflows |
+| [#8](https://github.com/tscircuit/checks/pull/8) | 🐙 Minor | tscircuitbot | Fix issue #7 by handling the case where a source trace is found but has no connected source ports. |
 
-### [tscircuit/jscad-electronics](https://github.com/tscircuit/jscad-electronics)
+### [tscircuit/cli](https://github.com/tscircuit/cli)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#7](https://github.com/tscircuit/jscad-electronics/pull/7) | 🐳 Major | seveibar | Add footprint pads for sizing and a 0603 resistor footprint with 3D model |
-| [#10](https://github.com/tscircuit/jscad-electronics/pull/10) | 🐳 Major | Slaviiiii | Implement the 0402 component in the jscad-fiber library. |
-| [#8](https://github.com/tscircuit/jscad-electronics/pull/8) | 🐳 Major | Slaviiiii | Add support for the A0603 resistor footprint and the ExtrudedPads component to render PCB footprints. |
-| [#9](https://github.com/tscircuit/jscad-electronics/pull/9) | 🐙 Minor | Slaviiiii | Add a new 0805 component to the project |
+| [#107](https://github.com/tscircuit/cli/pull/107) | 🟣 | andrii-balitskyi | Add biome and formatbot workflow |
+| [#108](https://github.com/tscircuit/cli/pull/108) | 🐳 Major | andrii-balitskyi | Ensure that the .npmignore file is read when publishing packages. |
+| [#111](https://github.com/tscircuit/cli/pull/111) | 🐙 Minor | DamilolaAlao | Add a new "go" command to the CLI that opens the TSCircuit Getting Started tutorial in the user's default browser. |
 
-### [tscircuit/jscad-fiber](https://github.com/tscircuit/jscad-fiber)
+### [tscircuit/easyeda-converter](https://github.com/tscircuit/easyeda-converter)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#34](https://github.com/tscircuit/jscad-fiber/pull/34) | 🐳 Major | seveibar | Enable `<Cuboid offset={{...}} color="blue" />` by adding `withOffsetProp` and `withColorProp` higher-order components. |
-| [#37](https://github.com/tscircuit/jscad-fiber/pull/37) | 🐳 Major | Slaviiiii | Add a Rotate component to the library, which allows rotating a geometric object by a specified set of angles. |
-| [#29](https://github.com/tscircuit/jscad-fiber/pull/29) | 🐳 Major | Slaviiiii | Implement union and translate wrappers |
-| [#26](https://github.com/tscircuit/jscad-fiber/pull/26) | 🐳 Major | r-bt | Adds a new `JSCadThreeMesh` component to render JSCAD geometry using `react-three-fiber`. |
-| [#22](https://github.com/tscircuit/jscad-fiber/pull/22) | 🐳 Major | r-bt | Adds a new `<custom>` component that supports rendering custom geometry |
-| [#28](https://github.com/tscircuit/jscad-fiber/pull/28) | 🐙 Minor | seveibar | Ignore the `package.json` file in the format check and fix issues with the status checks. |
-| [#24](https://github.com/tscircuit/jscad-fiber/pull/24) | 🐌 Tiny | r-bt | Bump the version number in the `package.json` file to publish a new version on npm. |
+| [#35](https://github.com/tscircuit/easyeda-converter/pull/35) | 🐳 Major | andrii-balitskyi | Make sure the model object URL resolves when generating TypeScript components. |
+| [#33](https://github.com/tscircuit/easyeda-converter/pull/33) | 🐳 Major | andrii-balitskyi | When specifying `-t tsx`, the base component filename is now based on the manufacturer part number instead of the input file name. |
+| [#34](https://github.com/tscircuit/easyeda-converter/pull/34) | 🐙 Minor | andrii-balitskyi | Make `SMT` and `jlcOnSale` properties optional in the `EasyEdaJsonSchema`. |
 
-### [tscircuit/checks](https://github.com/tscircuit/checks)
+### [tscircuit/soup](https://github.com/tscircuit/soup)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#6](https://github.com/tscircuit/checks/pull/6) | 🐳 Major | seveibar | Fix a bug in the `tracesOverlap` function to return the intersection point instead of just a boolean |
-| [#5](https://github.com/tscircuit/checks/pull/5) | 🐳 Major | seveibar | Add a hack that allows missing `start_pcb_port_ids` and `end_pcb_port_ids` to not break overlap testing when a trace only contains two ports. |
-| [#4](https://github.com/tscircuit/checks/pull/4) | 🐳 Major | seveibar | This pull request fixes an issue where the start and end port IDs were not correctly added to the trace, and it adds a regression test case. |
-| [#3](https://github.com/tscircuit/checks/pull/3) | 🐳 Major | seveibar | Implement nonoverlapping checks, add NetManager system for detecting connected traces, and add workflow files for building, formatting, and publishing. |
-| [#8](https://github.com/tscircuit/checks/pull/8) | 🐳 Major | tscircuitbot | Fix for issue #7 by improving the logic for checking if PCB ports are connected. |
+| [#14](https://github.com/tscircuit/soup/pull/14) | 🐳 Major | seveibar | Add "center" to pcb_trace_error and add biome.json |
+| [#13](https://github.com/tscircuit/soup/pull/13) | 🐙 Minor | imrishabh18 | Add a new field `manufacturer_part_number` to the `source_component_base` schema. |
+| [#12](https://github.com/tscircuit/soup/pull/12) | 🐌 Tiny | syedbarimanjan | Fix a typo in the export declaration to match the file name. |
 
-### [tscircuit/soup](https://github.com/tscircuit/soup)
+### [tscircuit/soup-util](https://github.com/tscircuit/soup-util)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#14](https://github.com/tscircuit/soup/pull/14) | 🐙 Minor | seveibar | Add "center" to pcb_trace_error and add biome.json |
-| [#13](https://github.com/tscircuit/soup/pull/13) | 🐙 Minor | imrishabh18 | Add manufacturer part number to source component base |
-| [#12](https://github.com/tscircuit/soup/pull/12) | 🐌 Tiny | syedbarimanjan | The change matches the export declaration to the file name in the `cad/index.ts` file. |
+| [#5](https://github.com/tscircuit/soup-util/pull/5) | 🐳 Major | seveibar | Introduces a feature to get readable names for various elements in a circuit, including PCB traces, ports, and SMT pads. |
 
-### [tscircuit/footprinter](https://github.com/tscircuit/footprinter)
+### [tscircuit/jscad-electronics](https://github.com/tscircuit/jscad-electronics)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#12](https://github.com/tscircuit/footprinter/pull/12) | 🐙 Minor | seveibar | Update the build system to target the "esnext" version of JavaScript and set the module resolution to "Bundler" to avoid issues with the Vite bundler and the lodash library. |
+| [#7](https://github.com/tscircuit/jscad-electronics/pull/7) | 🐳 Major | seveibar | Add Footprint Pads for sizing, add 0603 resistor footprint + 3D model |
+| [#10](https://github.com/tscircuit/jscad-electronics/pull/10) | 🐳 Major | Slaviiiii | Implement a 0402 component with accurate dimensions and terminator pads. |
+| [#9](https://github.com/tscircuit/jscad-electronics/pull/9) | 🐳 Major | Slaviiiii | Add a new 0805 component |
+| [#8](https://github.com/tscircuit/jscad-electronics/pull/8) | 🐳 Major | Slaviiiii | Introduce new components `A0603`, `ExtrudedPads`, `FootprintPad`, and `FootprintPlatedHole`, and update dependencies and configuration. |
 
-### [tscircuit/plop](https://github.com/tscircuit/plop)
+### [tscircuit/jscad-fiber](https://github.com/tscircuit/jscad-fiber)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#2](https://github.com/tscircuit/plop/pull/2) | 🐙 Minor | seveibar | Fix looking for biome dependency inside of dependencies rather than devDependencies |
+| [#34](https://github.com/tscircuit/jscad-fiber/pull/34) | 🐳 Major | seveibar | Introduce `withOffsetProp` and `withColorProp` higher-order components to enable setting `offset` and `color` props on the `<Cuboid>` component. |
+| [#37](https://github.com/tscircuit/jscad-fiber/pull/37) | 🐳 Major | Slaviiiii | Add a new "Rotate" wrapper component to the library |
+| [#29](https://github.com/tscircuit/jscad-fiber/pull/29) | 🐳 Major | Slaviiiii | Implement union and translate wrappers |
+| [#26](https://github.com/tscircuit/jscad-fiber/pull/26) | 🐳 Major | r-bt | Adds a new `JSCadThreeMesh` component that uses the `useJSCADRenderer` hook to render 3D objects from JSCAD code in a React Three Fiber scene. |
+| [#22](https://github.com/tscircuit/jscad-fiber/pull/22) | 🐳 Major | r-bt | Adds a `<custom>` component that supports rendering custom geometry, which is useful for testing and for rendering geometry that cannot be made declaratively. |
+| [#28](https://github.com/tscircuit/jscad-fiber/pull/28) | 🐙 Minor | seveibar | Have format ignore package.json, fix status checks |
+| [#39](https://github.com/tscircuit/jscad-fiber/pull/39) | 🐙 Minor | Slaviiiii | Adds support for both `rotation` and `angles` props in the `Rotate` component, allowing for more flexibility in how rotation is specified. |
+| [#24](https://github.com/tscircuit/jscad-fiber/pull/24) | 🐌 Tiny | r-bt | Update the version in package.json to publish a new version on npm |
 
-### [tscircuit/soup-to-svg](https://github.com/tscircuit/soup-to-svg)
+### [tscircuit/footprinter](https://github.com/tscircuit/footprinter)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#6](https://github.com/tscircuit/soup-to-svg/pull/6) | 🐳 Major | imrishabh18 | Introduced a new function `pcbSoupToSvg` to render a PCB circuit as SVG. |
-| [#5](https://github.com/tscircuit/soup-to-svg/pull/5) | 🐳 Major | imrishabh18 | Storybook added to the project |
-| [#3](https://github.com/tscircuit/soup-to-svg/pull/3) | 🐳 Major | imrishabh18 | The pull request adds a script to generate an SVG output from a Soup data structure. |
-| [#8](https://github.com/tscircuit/soup-to-svg/pull/8) | 🐙 Minor | seveibar | Rename the package from "@tscircuit/soup-to-svg" to "circuit-to-svg" and update the description to "Convert Circuit JSON to SVG". |
-| [#9](https://github.com/tscircuit/soup-to-svg/pull/9) | 🐙 Minor | imrishabh18 | Add a GitHub workflow to publish the project to npm |
+| [#12](https://github.com/tscircuit/footprinter/pull/12) | 🐙 Minor | seveibar | Update the build system to target `esnext` instead of `es2022` and use `moduleResolution: "Bundler"` to avoid the Vite lodash issue. |
 
-### [tscircuit/bunaider](https://github.com/tscircuit/bunaider)
+### [tscircuit/plop](https://github.com/tscircuit/plop)
+
+| PR # | Impact | Contributor | Description |
+|------|--------|-------------|-------------|
+| [#2](https://github.com/tscircuit/plop/pull/2) | 🐙 Minor | seveibar | Fix looking for biome dependency inside of dependencies rather than devDependencies |
+
+### [tscircuit/circuit-to-svg](https://github.com/tscircuit/circuit-to-svg)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#4](https://github.com/tscircuit/bunaider/pull/4) | 🐙 Minor | seveibar | Update the CLI version to match the package.json version |
+| [#9](https://github.com/tscircuit/circuit-to-svg/pull/9) | 🐳 Major | imrishabh18 | Add a GitHub workflow to publish the project to npm |
+| [#6](https://github.com/tscircuit/circuit-to-svg/pull/6) | 🐳 Major | imrishabh18 | Added a new function `pcbSoupToSvg` to render a PCB circuit as an SVG. |
+| [#5](https://github.com/tscircuit/circuit-to-svg/pull/5) | 🐳 Major | imrishabh18 | Storybook added to the project |
+| [#3](https://github.com/tscircuit/circuit-to-svg/pull/3) | 🐳 Major | imrishabh18 | Add a new function to generate SVG from soup data |
+| [#8](https://github.com/tscircuit/circuit-to-svg/pull/8) | 🐙 Minor | seveibar | Rename the package from "@tscircuit/soup-to-svg" to "circuit-to-svg" and update the description to reflect the purpose of converting Circuit JSON to SVG. |
 
 ### [tscircuit/schematic-viewer](https://github.com/tscircuit/schematic-viewer)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#47](https://github.com/tscircuit/schematic-viewer/pull/47) | 🐳 Major | imrishabh18 | Adds the manufacturer part number to the SchematicBug component and displays it as text. |
+| [#47](https://github.com/tscircuit/schematic-viewer/pull/47) | 🐳 Major | imrishabh18 | Adds manufacturer part number feature to the SimpleBug component |
 
 ### [tscircuit/circuit-to-png](https://github.com/tscircuit/circuit-to-png)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#7](https://github.com/tscircuit/circuit-to-png/pull/7) | 🐳 Major | imrishabh18 | Add a GitHub Actions workflow to publish the project to NPM |
-| [#6](https://github.com/tscircuit/circuit-to-png/pull/6) | 🐳 Major | imrishabh18 | Refactor the circuitToPng function to accept both PCB and schematic circuits |
-| [#4](https://github.com/tscircuit/circuit-to-png/pull/4) | 🐳 Major | imrishabh18 | Adds a new function `soupToPng` that converts a circuit represented as a soup of elements to a PNG image. |
-| [#2](https://github.com/tscircuit/circuit-to-png/pull/2) | 🐳 Major | imrishabh18 | Initializes the repository and sets up the project structure, including the .gitignore file, README, package.json, and TypeScript configuration. |
+| [#7](https://github.com/tscircuit/circuit-to-png/pull/7) | 🐳 Major | imrishabh18 | Add a GitHub Actions workflow to publish the package to npm |
+| [#6](https://github.com/tscircuit/circuit-to-png/pull/6) | 🐳 Major | imrishabh18 | Refactor the `circuitToPng` function to accept a `circuitType` parameter and use the appropriate `pcbSoupToSvg` or `soupToSvg` function to generate the SVG. |
+| [#4](https://github.com/tscircuit/circuit-to-png/pull/4) | 🐳 Major | imrishabh18 | Introduces a new feature to convert a circuit represented as a SOUP (Structured Object Markup) to a PNG image. |
+| [#2](https://github.com/tscircuit/circuit-to-png/pull/2) | 🐳 Major | imrishabh18 | Initialize the repository with a .gitignore file, a README.md file, and a biome.json file for project configuration. |
+| [#10](https://github.com/tscircuit/circuit-to-png/pull/10) | 🐙 Minor | imrishabh18 | Add missing version field in package.json |
+| [#9](https://github.com/tscircuit/circuit-to-png/pull/9) | 🐌 Tiny | imrishabh18 | Update the lock file to the latest version |
+| [#8](https://github.com/tscircuit/circuit-to-png/pull/8) | 🐌 Tiny | imrishabh18 | Update README and package dependencies. |
 
 ## Changes by Contributor
 
+### [tscircuitbot](https://github.com/tscircuitbot)
+
+| PR # | Impact | Description |
+|------|--------|-------------|
+| [#85](https://github.com/tscircuit/builder/pull/85) | 🐳 Major | Adds a `routingDisabled` option to the `GroupBuilder` class, which allows disabling the generation of PCB traces and vias. |
+| [#30](https://github.com/tscircuit/pcb-viewer/pull/30) | 🐳 Major | Add support for displaying error diamonds at error location |
+| [#10](https://github.com/tscircuit/bunaider/pull/10) | 🐳 Major | Fix for issue #7 by creating a pull request and commenting on the original issue. |
+| [#13](https://github.com/tscircuit/props/pull/13) | 🐙 Minor | Add an optional `routingDisabled` property to the `GroupProps` type. |
+| [#8](https://github.com/tscircuit/checks/pull/8) | 🐙 Minor | Fix issue #7 by handling the case where a source trace is found but has no connected source ports. |
+
 ### [andrii-balitskyi](https://github.com/andrii-balitskyi)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#82](https://github.com/tscircuit/builder/pull/82) | 🐳 Major | Set the `y` coordinate of `cad_component` to `180` when it's on the bottom layer. |
-| [#107](https://github.com/tscircuit/cli/pull/107) | 🐳 Major | Add biome and formatbot workflow |
-| [#108](https://github.com/tscircuit/cli/pull/108) | 🐳 Major | Ensure that .npmignore is read when publishing packages to include or exclude files. |
-| [#35](https://github.com/tscircuit/easyeda-converter/pull/35) | 🐳 Major | Ensure that the model object URL resolves when generating TypeScript components. |
-| [#34](https://github.com/tscircuit/easyeda-converter/pull/34) | 🐙 Minor | Make `SMT` and `jlcOnSale` properties optional in `EasyEdaJsonSchema`. |
-| [#33](https://github.com/tscircuit/easyeda-converter/pull/33) | 🐙 Minor | When specifying `-t tsx`, the base component filename is now derived from the manufacturer part number instead of the input file name. |
+| [#82](https://github.com/tscircuit/builder/pull/82) | 🐳 Major | Set the `y` coordinate of the `cad_component` to `180` when it's on the bottom layer. |
+| [#107](https://github.com/tscircuit/cli/pull/107) | 🟣 | Add biome and formatbot workflow |
+| [#108](https://github.com/tscircuit/cli/pull/108) | 🐳 Major | Ensure that the .npmignore file is read when publishing packages. |
+| [#35](https://github.com/tscircuit/easyeda-converter/pull/35) | 🐳 Major | Make sure the model object URL resolves when generating TypeScript components. |
+| [#33](https://github.com/tscircuit/easyeda-converter/pull/33) | 🐳 Major | When specifying `-t tsx`, the base component filename is now based on the manufacturer part number instead of the input file name. |
+| [#34](https://github.com/tscircuit/easyeda-converter/pull/34) | 🐙 Minor | Make `SMT` and `jlcOnSale` properties optional in the `EasyEdaJsonSchema`. |
 
 ### [seveibar](https://github.com/seveibar)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#84](https://github.com/tscircuit/builder/pull/84) | 🐳 Major | Add a GitHub Actions workflow to automatically fix issues labeled as 'aider' |
-| [#80](https://github.com/tscircuit/builder/pull/80) | 🐳 Major | The pull request handles PCB routes when finding the center of bounds, and also handles the case when there are no available points in the bounds. |
-| [#28](https://github.com/tscircuit/pcb-viewer/pull/28) | 🐳 Major | Add a new GitHub workflow to build the project on push and pull request events and fix a build issue in the `edit-events.ts` file. |
-| [#12](https://github.com/tscircuit/props/pull/12) | 🐳 Major | Add a GitHub workflow to automatically fix issues labeled as 'aider' using the bunaider tool. |
-| [#10](https://github.com/tscircuit/props/pull/10) | 🐳 Major | Add a GitHub Actions workflow to automatically format code in pull requests. |
-| [#7](https://github.com/tscircuit/jscad-electronics/pull/7) | 🐳 Major | Add footprint pads for sizing and a 0603 resistor footprint with 3D model |
-| [#34](https://github.com/tscircuit/jscad-fiber/pull/34) | 🐳 Major | Enable `<Cuboid offset={{...}} color="blue" />` by adding `withOffsetProp` and `withColorProp` higher-order components. |
-| [#6](https://github.com/tscircuit/checks/pull/6) | 🐳 Major | Fix a bug in the `tracesOverlap` function to return the intersection point instead of just a boolean |
-| [#5](https://github.com/tscircuit/checks/pull/5) | 🐳 Major | Add a hack that allows missing `start_pcb_port_ids` and `end_pcb_port_ids` to not break overlap testing when a trace only contains two ports. |
-| [#4](https://github.com/tscircuit/checks/pull/4) | 🐳 Major | This pull request fixes an issue where the start and end port IDs were not correctly added to the trace, and it adds a regression test case. |
-| [#3](https://github.com/tscircuit/checks/pull/3) | 🐳 Major | Implement nonoverlapping checks, add NetManager system for detecting connected traces, and add workflow files for building, formatting, and publishing. |
+| [#84](https://github.com/tscircuit/builder/pull/84) | 🐳 Major | Add a GitHub Actions workflow for the "bunaider" tool to automatically fix issues labeled with "aider" |
+| [#80](https://github.com/tscircuit/builder/pull/80) | 🐳 Major | Handle PCB routes when finding the center of bounds, and handle cases where there are no available points in the bounds. |
+| [#28](https://github.com/tscircuit/pcb-viewer/pull/28) | 🐳 Major | Add npm build workflow and fix build error |
+| [#14](https://github.com/tscircuit/soup/pull/14) | 🐳 Major | Add "center" to pcb_trace_error and add biome.json |
+| [#5](https://github.com/tscircuit/soup-util/pull/5) | 🐳 Major | Introduces a feature to get readable names for various elements in a circuit, including PCB traces, ports, and SMT pads. |
+| [#12](https://github.com/tscircuit/props/pull/12) | 🐳 Major | Add a GitHub workflow to automatically fix issues labeled as 'aider' |
+| [#7](https://github.com/tscircuit/jscad-electronics/pull/7) | 🐳 Major | Add Footprint Pads for sizing, add 0603 resistor footprint + 3D model |
+| [#34](https://github.com/tscircuit/jscad-fiber/pull/34) | 🐳 Major | Introduce `withOffsetProp` and `withColorProp` higher-order components to enable setting `offset` and `color` props on the `<Cuboid>` component. |
+| [#6](https://github.com/tscircuit/checks/pull/6) | 🐳 Major | The pull request fixes a bug in the `tracesOverlap` function by returning the intersection point instead of just a boolean value. |
+| [#5](https://github.com/tscircuit/checks/pull/5) | 🐳 Major | Add a hack to allow missing `start_pcb_port_ids` and `end_pcb_port_ids` to not break overlap testing when a trace only contains two ports. |
+| [#4](https://github.com/tscircuit/checks/pull/4) | 🐳 Major | This pull request fixes a bug in the `check-each-pcb-trace-non-overlapping.ts` file by ensuring that the `start_pcb_port_id` and `end_pcb_port_id` properties are correctly added to the `PCBTrace` objects if they are missing. It also adds a regression test case to ensure the fix works as expected. |
+| [#3](https://github.com/tscircuit/checks/pull/3) | 🐳 Major | Implement nonoverlapping checks, add NetManager system for detecting connected traces, and add workflows |
+| [#11](https://github.com/tscircuit/bunaider/pull/11) | 🐳 Major | Fixes scanning of pull request comments using the Octokit library by adding support for fetching review comments and reviews. |
+| [#9](https://github.com/tscircuit/bunaider/pull/9) | 🐳 Major | Allow bunaider to respond to comments on PRs |
 | [#81](https://github.com/tscircuit/builder/pull/81) | 🐙 Minor | Adds a new function `buildPcbTraceElements` to the library for exporting PCB trace elements for benchmarking. |
-| [#79](https://github.com/tscircuit/builder/pull/79) | 🐙 Minor | Adds support for `pcbX` and `pcbY` properties in the `<board />` component, deprecating the use of `center_x`, `center_y`, and `center`. |
-| [#78](https://github.com/tscircuit/builder/pull/78) | 🐙 Minor | Add a development guide for the `@tscircuit/builder` library, including instructions on running tests and making changes. |
-| [#26](https://github.com/tscircuit/pcb-viewer/pull/26) | 🐙 Minor | The pull request fixes a deprecated import of `@tscircuit/builder` and replaces it with `@tscircuit/soup`. |
-| [#14](https://github.com/tscircuit/soup/pull/14) | 🐙 Minor | Add "center" to pcb_trace_error and add biome.json |
-| [#8](https://github.com/tscircuit/props/pull/8) | 🐙 Minor | Make `pinLabels` and `schPortArrangement` optional properties in the component builder. |
-| [#12](https://github.com/tscircuit/footprinter/pull/12) | 🐙 Minor | Update the build system to target the "esnext" version of JavaScript and set the module resolution to "Bundler" to avoid issues with the Vite bundler and the lodash library. |
-| [#28](https://github.com/tscircuit/jscad-fiber/pull/28) | 🐙 Minor | Ignore the `package.json` file in the format check and fix issues with the status checks. |
+| [#79](https://github.com/tscircuit/builder/pull/79) | 🐙 Minor | Adds support for `pcbX` and `pcbY` properties in the `<board />` component, which can be used instead of the deprecated `center_x`, `center_y`, and `center` properties. |
+| [#78](https://github.com/tscircuit/builder/pull/78) | 🐙 Minor | Add a development guide for the `@tscircuit/builder` library, including information on running tests and the process for addressing issues. |
+| [#26](https://github.com/tscircuit/pcb-viewer/pull/26) | 🐙 Minor | Update deprecated builder import to soup |
+| [#10](https://github.com/tscircuit/props/pull/10) | 🐙 Minor | Add a GitHub Actions workflow to automatically format code in pull requests. |
+| [#8](https://github.com/tscircuit/props/pull/8) | 🐙 Minor | Make `pinLabels` and `schPortArrangement` optional in the component props |
+| [#12](https://github.com/tscircuit/footprinter/pull/12) | 🐙 Minor | Update the build system to target `esnext` instead of `es2022` and use `moduleResolution: "Bundler"` to avoid the Vite lodash issue. |
+| [#28](https://github.com/tscircuit/jscad-fiber/pull/28) | 🐙 Minor | Have format ignore package.json, fix status checks |
 | [#2](https://github.com/tscircuit/plop/pull/2) | 🐙 Minor | Fix looking for biome dependency inside of dependencies rather than devDependencies |
-| [#8](https://github.com/tscircuit/soup-to-svg/pull/8) | 🐙 Minor | Rename the package from "@tscircuit/soup-to-svg" to "circuit-to-svg" and update the description to "Convert Circuit JSON to SVG". |
-| [#4](https://github.com/tscircuit/bunaider/pull/4) | 🐙 Minor | Update the CLI version to match the package.json version |
+| [#8](https://github.com/tscircuit/circuit-to-svg/pull/8) | 🐙 Minor | Rename the package from "@tscircuit/soup-to-svg" to "circuit-to-svg" and update the description to reflect the purpose of converting Circuit JSON to SVG. |
+| [#4](https://github.com/tscircuit/bunaider/pull/4) | 🐌 Tiny | Update the version in the CLI program to use the version from the package.json file. |
 
 ### [imrishabh18](https://github.com/imrishabh18)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#47](https://github.com/tscircuit/schematic-viewer/pull/47) | 🐳 Major | Adds the manufacturer part number to the SchematicBug component and displays it as text. |
-| [#6](https://github.com/tscircuit/soup-to-svg/pull/6) | 🐳 Major | Introduced a new function `pcbSoupToSvg` to render a PCB circuit as SVG. |
-| [#5](https://github.com/tscircuit/soup-to-svg/pull/5) | 🐳 Major | Storybook added to the project |
-| [#3](https://github.com/tscircuit/soup-to-svg/pull/3) | 🐳 Major | The pull request adds a script to generate an SVG output from a Soup data structure. |
-| [#7](https://github.com/tscircuit/circuit-to-png/pull/7) | 🐳 Major | Add a GitHub Actions workflow to publish the project to NPM |
-| [#6](https://github.com/tscircuit/circuit-to-png/pull/6) | 🐳 Major | Refactor the circuitToPng function to accept both PCB and schematic circuits |
-| [#4](https://github.com/tscircuit/circuit-to-png/pull/4) | 🐳 Major | Adds a new function `soupToPng` that converts a circuit represented as a soup of elements to a PNG image. |
-| [#2](https://github.com/tscircuit/circuit-to-png/pull/2) | 🐳 Major | Initializes the repository and sets up the project structure, including the .gitignore file, README, package.json, and TypeScript configuration. |
-| [#13](https://github.com/tscircuit/soup/pull/13) | 🐙 Minor | Add manufacturer part number to source component base |
-| [#9](https://github.com/tscircuit/props/pull/9) | 🐙 Minor | Add manufacturer part number to the `bugProps` component in the TypeScript code. |
-| [#9](https://github.com/tscircuit/soup-to-svg/pull/9) | 🐙 Minor | Add a GitHub workflow to publish the project to npm |
-
-### [tscircuitbot](https://github.com/tscircuitbot)
-
-| PR # | Impact | Description |
-|------|--------|-------------|
-| [#30](https://github.com/tscircuit/pcb-viewer/pull/30) | 🐳 Major | Add support for displaying error diamonds at error location |
-| [#8](https://github.com/tscircuit/checks/pull/8) | 🐳 Major | Fix for issue #7 by improving the logic for checking if PCB ports are connected. |
-| [#13](https://github.com/tscircuit/props/pull/13) | 🐙 Minor | Adds a new `routingDisabled` option to the `GroupProps` type. |
+| [#47](https://github.com/tscircuit/schematic-viewer/pull/47) | 🐳 Major | Adds manufacturer part number feature to the SimpleBug component |
+| [#9](https://github.com/tscircuit/circuit-to-svg/pull/9) | 🐳 Major | Add a GitHub workflow to publish the project to npm |
+| [#6](https://github.com/tscircuit/circuit-to-svg/pull/6) | 🐳 Major | Added a new function `pcbSoupToSvg` to render a PCB circuit as an SVG. |
+| [#5](https://github.com/tscircuit/circuit-to-svg/pull/5) | 🐳 Major | Storybook added to the project |
+| [#3](https://github.com/tscircuit/circuit-to-svg/pull/3) | 🐳 Major | Add a new function to generate SVG from soup data |
+| [#7](https://github.com/tscircuit/circuit-to-png/pull/7) | 🐳 Major | Add a GitHub Actions workflow to publish the package to npm |
+| [#6](https://github.com/tscircuit/circuit-to-png/pull/6) | 🐳 Major | Refactor the `circuitToPng` function to accept a `circuitType` parameter and use the appropriate `pcbSoupToSvg` or `soupToSvg` function to generate the SVG. |
+| [#4](https://github.com/tscircuit/circuit-to-png/pull/4) | 🐳 Major | Introduces a new feature to convert a circuit represented as a SOUP (Structured Object Markup) to a PNG image. |
+| [#2](https://github.com/tscircuit/circuit-to-png/pull/2) | 🐳 Major | Initialize the repository with a .gitignore file, a README.md file, and a biome.json file for project configuration. |
+| [#13](https://github.com/tscircuit/soup/pull/13) | 🐙 Minor | Add a new field `manufacturer_part_number` to the `source_component_base` schema. |
+| [#9](https://github.com/tscircuit/props/pull/9) | 🐙 Minor | Add a new manufacturer part number field to the `bugProps` interface. |
+| [#10](https://github.com/tscircuit/circuit-to-png/pull/10) | 🐙 Minor | Add missing version field in package.json |
+| [#9](https://github.com/tscircuit/circuit-to-png/pull/9) | 🐌 Tiny | Update the lock file to the latest version |
+| [#8](https://github.com/tscircuit/circuit-to-png/pull/8) | 🐌 Tiny | Update README and package dependencies. |
 
 ### [DamilolaAlao](https://github.com/DamilolaAlao)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#111](https://github.com/tscircuit/cli/pull/111) | 🐙 Minor | Add a new command "go" to open the TSCircuit Getting Started tutorial in the browser. |
+| [#111](https://github.com/tscircuit/cli/pull/111) | 🐙 Minor | Add a new "go" command to the CLI that opens the TSCircuit Getting Started tutorial in the user's default browser. |
 
 ### [syedbarimanjan](https://github.com/syedbarimanjan)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#12](https://github.com/tscircuit/soup/pull/12) | 🐌 Tiny | The change matches the export declaration to the file name in the `cad/index.ts` file. |
+| [#12](https://github.com/tscircuit/soup/pull/12) | 🐌 Tiny | Fix a typo in the export declaration to match the file name. |
 
 ### [Slaviiiii](https://github.com/Slaviiiii)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#10](https://github.com/tscircuit/jscad-electronics/pull/10) | 🐳 Major | Implement the 0402 component in the jscad-fiber library. |
-| [#8](https://github.com/tscircuit/jscad-electronics/pull/8) | 🐳 Major | Add support for the A0603 resistor footprint and the ExtrudedPads component to render PCB footprints. |
-| [#37](https://github.com/tscircuit/jscad-fiber/pull/37) | 🐳 Major | Add a Rotate component to the library, which allows rotating a geometric object by a specified set of angles. |
+| [#10](https://github.com/tscircuit/jscad-electronics/pull/10) | 🐳 Major | Implement a 0402 component with accurate dimensions and terminator pads. |
+| [#9](https://github.com/tscircuit/jscad-electronics/pull/9) | 🐳 Major | Add a new 0805 component |
+| [#8](https://github.com/tscircuit/jscad-electronics/pull/8) | 🐳 Major | Introduce new components `A0603`, `ExtrudedPads`, `FootprintPad`, and `FootprintPlatedHole`, and update dependencies and configuration. |
+| [#37](https://github.com/tscircuit/jscad-fiber/pull/37) | 🐳 Major | Add a new "Rotate" wrapper component to the library |
 | [#29](https://github.com/tscircuit/jscad-fiber/pull/29) | 🐳 Major | Implement union and translate wrappers |
-| [#9](https://github.com/tscircuit/jscad-electronics/pull/9) | 🐙 Minor | Add a new 0805 component to the project |
+| [#39](https://github.com/tscircuit/jscad-fiber/pull/39) | 🐙 Minor | Adds support for both `rotation` and `angles` props in the `Rotate` component, allowing for more flexibility in how rotation is specified. |
 
 ### [r-bt](https://github.com/r-bt)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#26](https://github.com/tscircuit/jscad-fiber/pull/26) | 🐳 Major | Adds a new `JSCadThreeMesh` component to render JSCAD geometry using `react-three-fiber`. |
-| [#22](https://github.com/tscircuit/jscad-fiber/pull/22) | 🐳 Major | Adds a new `<custom>` component that supports rendering custom geometry |
-| [#24](https://github.com/tscircuit/jscad-fiber/pull/24) | 🐌 Tiny | Bump the version number in the `package.json` file to publish a new version on npm. |
+| [#26](https://github.com/tscircuit/jscad-fiber/pull/26) | 🐳 Major | Adds a new `JSCadThreeMesh` component that uses the `useJSCADRenderer` hook to render 3D objects from JSCAD code in a React Three Fiber scene. |
+| [#22](https://github.com/tscircuit/jscad-fiber/pull/22) | 🐳 Major | Adds a `<custom>` component that supports rendering custom geometry, which is useful for testing and for rendering geometry that cannot be made declaratively. |
+| [#24](https://github.com/tscircuit/jscad-fiber/pull/24) | 🐌 Tiny | Update the version in package.json to publish a new version on npm |
 
 
 
diff --git a/contribution-overviews/2024-07-20.md b/contribution-overviews/2024-07-20.md
index a35ac44..73d8d03 100644
--- a/contribution-overviews/2024-07-20.md
+++ b/contribution-overviews/2024-07-20.md
@@ -4,34 +4,35 @@
 
 ```mermaid
 pie
-    "tscircuit/builder" : 6
-    "tscircuit/cli" : 3
-    "tscircuit/easyeda-converter" : 3
+    "tscircuit/builder" : 7
     "tscircuit/pcb-viewer" : 3
+    "tscircuit/bunaider" : 4
     "tscircuit/props" : 5
-    "tscircuit/jscad-electronics" : 4
-    "tscircuit/jscad-fiber" : 7
     "tscircuit/checks" : 5
+    "tscircuit/cli" : 3
+    "tscircuit/easyeda-converter" : 3
     "tscircuit/soup" : 3
+    "tscircuit/soup-util" : 1
+    "tscircuit/jscad-electronics" : 4
+    "tscircuit/jscad-fiber" : 8
     "tscircuit/footprinter" : 1
     "tscircuit/plop" : 1
-    "tscircuit/soup-to-svg" : 5
-    "tscircuit/bunaider" : 1
+    "tscircuit/circuit-to-svg" : 5
     "tscircuit/schematic-viewer" : 1
-    "tscircuit/circuit-to-png" : 4
+    "tscircuit/circuit-to-png" : 7
 ```
 
 ## Contributor Overview
 
 | Contributor | 🐳 Major | 🐙 Minor | 🐌 Tiny |
 |-------------|-------|-------|-------|
-| andrii-balitskyi | 4 | 2 | 0 |
-| seveibar | 11 | 11 | 0 |
-| imrishabh18 | 8 | 3 | 0 |
-| tscircuitbot | 2 | 1 | 0 |
+| tscircuitbot | 3 | 2 | 0 |
+| andrii-balitskyi | 4 | 1 | 0 |
+| seveibar | 14 | 10 | 1 |
+| imrishabh18 | 9 | 3 | 2 |
 | DamilolaAlao | 0 | 1 | 0 |
 | syedbarimanjan | 0 | 0 | 1 |
-| Slaviiiii | 4 | 1 | 0 |
+| Slaviiiii | 5 | 1 | 0 |
 | r-bt | 2 | 0 | 1 |
 
 ## Changes by Repository
@@ -40,220 +41,243 @@ pie
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#82](https://github.com/tscircuit/builder/pull/82) | 🐳 Major | andrii-balitskyi | Set the `y` coordinate of `cad_component` to `180` when it's on the bottom layer. |
-| [#84](https://github.com/tscircuit/builder/pull/84) | 🐳 Major | seveibar | Add a GitHub Actions workflow to automatically fix issues labeled as 'aider' |
-| [#80](https://github.com/tscircuit/builder/pull/80) | 🐳 Major | seveibar | The pull request handles PCB routes when finding the center of bounds, and also handles the case when there are no available points in the bounds. |
+| [#85](https://github.com/tscircuit/builder/pull/85) | 🐳 Major | tscircuitbot | Adds a `routingDisabled` option to the `GroupBuilder` class, which allows disabling the generation of PCB traces and vias. |
+| [#82](https://github.com/tscircuit/builder/pull/82) | 🐳 Major | andrii-balitskyi | Set the `y` coordinate of the `cad_component` to `180` when it's on the bottom layer. |
+| [#84](https://github.com/tscircuit/builder/pull/84) | 🐳 Major | seveibar | Add a GitHub Actions workflow for the "bunaider" tool to automatically fix issues labeled with "aider" |
+| [#80](https://github.com/tscircuit/builder/pull/80) | 🐳 Major | seveibar | Handle PCB routes when finding the center of bounds, and handle cases where there are no available points in the bounds. |
 | [#81](https://github.com/tscircuit/builder/pull/81) | 🐙 Minor | seveibar | Adds a new function `buildPcbTraceElements` to the library for exporting PCB trace elements for benchmarking. |
-| [#79](https://github.com/tscircuit/builder/pull/79) | 🐙 Minor | seveibar | Adds support for `pcbX` and `pcbY` properties in the `<board />` component, deprecating the use of `center_x`, `center_y`, and `center`. |
-| [#78](https://github.com/tscircuit/builder/pull/78) | 🐙 Minor | seveibar | Add a development guide for the `@tscircuit/builder` library, including instructions on running tests and making changes. |
+| [#79](https://github.com/tscircuit/builder/pull/79) | 🐙 Minor | seveibar | Adds support for `pcbX` and `pcbY` properties in the `<board />` component, which can be used instead of the deprecated `center_x`, `center_y`, and `center` properties. |
+| [#78](https://github.com/tscircuit/builder/pull/78) | 🐙 Minor | seveibar | Add a development guide for the `@tscircuit/builder` library, including information on running tests and the process for addressing issues. |
 
-### [tscircuit/cli](https://github.com/tscircuit/cli)
+### [tscircuit/pcb-viewer](https://github.com/tscircuit/pcb-viewer)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#107](https://github.com/tscircuit/cli/pull/107) | 🐳 Major | andrii-balitskyi | Add biome and formatbot workflow |
-| [#108](https://github.com/tscircuit/cli/pull/108) | 🐳 Major | andrii-balitskyi | Ensure that .npmignore is read when publishing packages to include or exclude files. |
-| [#111](https://github.com/tscircuit/cli/pull/111) | 🐙 Minor | DamilolaAlao | Add a new command "go" to open the TSCircuit Getting Started tutorial in the browser. |
+| [#30](https://github.com/tscircuit/pcb-viewer/pull/30) | 🐳 Major | tscircuitbot | Add support for displaying error diamonds at error location |
+| [#28](https://github.com/tscircuit/pcb-viewer/pull/28) | 🐳 Major | seveibar | Add npm build workflow and fix build error |
+| [#26](https://github.com/tscircuit/pcb-viewer/pull/26) | 🐙 Minor | seveibar | Update deprecated builder import to soup |
 
-### [tscircuit/easyeda-converter](https://github.com/tscircuit/easyeda-converter)
+### [tscircuit/bunaider](https://github.com/tscircuit/bunaider)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#35](https://github.com/tscircuit/easyeda-converter/pull/35) | 🐳 Major | andrii-balitskyi | Ensure that the model object URL resolves when generating TypeScript components. |
-| [#34](https://github.com/tscircuit/easyeda-converter/pull/34) | 🐙 Minor | andrii-balitskyi | Make `SMT` and `jlcOnSale` properties optional in `EasyEdaJsonSchema`. |
-| [#33](https://github.com/tscircuit/easyeda-converter/pull/33) | 🐙 Minor | andrii-balitskyi | When specifying `-t tsx`, the base component filename is now derived from the manufacturer part number instead of the input file name. |
+| [#10](https://github.com/tscircuit/bunaider/pull/10) | 🐳 Major | tscircuitbot | Fix for issue #7 by creating a pull request and commenting on the original issue. |
+| [#11](https://github.com/tscircuit/bunaider/pull/11) | 🐳 Major | seveibar | Fixes scanning of pull request comments using the Octokit library by adding support for fetching review comments and reviews. |
+| [#9](https://github.com/tscircuit/bunaider/pull/9) | 🐳 Major | seveibar | Allow bunaider to respond to comments on PRs |
+| [#4](https://github.com/tscircuit/bunaider/pull/4) | 🐌 Tiny | seveibar | Update the version in the CLI program to use the version from the package.json file. |
 
-### [tscircuit/pcb-viewer](https://github.com/tscircuit/pcb-viewer)
+### [tscircuit/props](https://github.com/tscircuit/props)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#28](https://github.com/tscircuit/pcb-viewer/pull/28) | 🐳 Major | seveibar | Add a new GitHub workflow to build the project on push and pull request events and fix a build issue in the `edit-events.ts` file. |
-| [#30](https://github.com/tscircuit/pcb-viewer/pull/30) | 🐳 Major | tscircuitbot | Add support for displaying error diamonds at error location |
-| [#26](https://github.com/tscircuit/pcb-viewer/pull/26) | 🐙 Minor | seveibar | The pull request fixes a deprecated import of `@tscircuit/builder` and replaces it with `@tscircuit/soup`. |
+| [#12](https://github.com/tscircuit/props/pull/12) | 🐳 Major | seveibar | Add a GitHub workflow to automatically fix issues labeled as 'aider' |
+| [#13](https://github.com/tscircuit/props/pull/13) | 🐙 Minor | tscircuitbot | Add an optional `routingDisabled` property to the `GroupProps` type. |
+| [#10](https://github.com/tscircuit/props/pull/10) | 🐙 Minor | seveibar | Add a GitHub Actions workflow to automatically format code in pull requests. |
+| [#8](https://github.com/tscircuit/props/pull/8) | 🐙 Minor | seveibar | Make `pinLabels` and `schPortArrangement` optional in the component props |
+| [#9](https://github.com/tscircuit/props/pull/9) | 🐙 Minor | imrishabh18 | Add a new manufacturer part number field to the `bugProps` interface. |
 
-### [tscircuit/props](https://github.com/tscircuit/props)
+### [tscircuit/checks](https://github.com/tscircuit/checks)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#12](https://github.com/tscircuit/props/pull/12) | 🐳 Major | seveibar | Add a GitHub workflow to automatically fix issues labeled as 'aider' using the bunaider tool. |
-| [#10](https://github.com/tscircuit/props/pull/10) | 🐳 Major | seveibar | Add a GitHub Actions workflow to automatically format code in pull requests. |
-| [#8](https://github.com/tscircuit/props/pull/8) | 🐙 Minor | seveibar | Make `pinLabels` and `schPortArrangement` optional properties in the component builder. |
-| [#9](https://github.com/tscircuit/props/pull/9) | 🐙 Minor | imrishabh18 | Add manufacturer part number to the `bugProps` component in the TypeScript code. |
-| [#13](https://github.com/tscircuit/props/pull/13) | 🐙 Minor | tscircuitbot | Adds a new `routingDisabled` option to the `GroupProps` type. |
+| [#6](https://github.com/tscircuit/checks/pull/6) | 🐳 Major | seveibar | The pull request fixes a bug in the `tracesOverlap` function by returning the intersection point instead of just a boolean value. |
+| [#5](https://github.com/tscircuit/checks/pull/5) | 🐳 Major | seveibar | Add a hack to allow missing `start_pcb_port_ids` and `end_pcb_port_ids` to not break overlap testing when a trace only contains two ports. |
+| [#4](https://github.com/tscircuit/checks/pull/4) | 🐳 Major | seveibar | This pull request fixes a bug in the `check-each-pcb-trace-non-overlapping.ts` file by ensuring that the `start_pcb_port_id` and `end_pcb_port_id` properties are correctly added to the `PCBTrace` objects if they are missing. It also adds a regression test case to ensure the fix works as expected. |
+| [#3](https://github.com/tscircuit/checks/pull/3) | 🐳 Major | seveibar | Implement nonoverlapping checks, add NetManager system for detecting connected traces, and add workflows |
+| [#8](https://github.com/tscircuit/checks/pull/8) | 🐙 Minor | tscircuitbot | Fix issue #7 by handling the case where a source trace is found but has no connected source ports. |
 
-### [tscircuit/jscad-electronics](https://github.com/tscircuit/jscad-electronics)
+### [tscircuit/cli](https://github.com/tscircuit/cli)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#7](https://github.com/tscircuit/jscad-electronics/pull/7) | 🐳 Major | seveibar | Add footprint pads for sizing and a 0603 resistor footprint with 3D model |
-| [#10](https://github.com/tscircuit/jscad-electronics/pull/10) | 🐳 Major | Slaviiiii | Implement the 0402 component in the jscad-fiber library. |
-| [#8](https://github.com/tscircuit/jscad-electronics/pull/8) | 🐳 Major | Slaviiiii | Add support for the A0603 resistor footprint and the ExtrudedPads component to render PCB footprints. |
-| [#9](https://github.com/tscircuit/jscad-electronics/pull/9) | 🐙 Minor | Slaviiiii | Add a new 0805 component to the project |
+| [#107](https://github.com/tscircuit/cli/pull/107) | 🟣 | andrii-balitskyi | Add biome and formatbot workflow |
+| [#108](https://github.com/tscircuit/cli/pull/108) | 🐳 Major | andrii-balitskyi | Ensure that the .npmignore file is read when publishing packages. |
+| [#111](https://github.com/tscircuit/cli/pull/111) | 🐙 Minor | DamilolaAlao | Add a new "go" command to the CLI that opens the TSCircuit Getting Started tutorial in the user's default browser. |
 
-### [tscircuit/jscad-fiber](https://github.com/tscircuit/jscad-fiber)
+### [tscircuit/easyeda-converter](https://github.com/tscircuit/easyeda-converter)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#34](https://github.com/tscircuit/jscad-fiber/pull/34) | 🐳 Major | seveibar | Enable `<Cuboid offset={{...}} color="blue" />` by adding `withOffsetProp` and `withColorProp` higher-order components. |
-| [#37](https://github.com/tscircuit/jscad-fiber/pull/37) | 🐳 Major | Slaviiiii | Add a Rotate component to the library, which allows rotating a geometric object by a specified set of angles. |
-| [#29](https://github.com/tscircuit/jscad-fiber/pull/29) | 🐳 Major | Slaviiiii | Implement union and translate wrappers |
-| [#26](https://github.com/tscircuit/jscad-fiber/pull/26) | 🐳 Major | r-bt | Adds a new `JSCadThreeMesh` component to render JSCAD geometry using `react-three-fiber`. |
-| [#22](https://github.com/tscircuit/jscad-fiber/pull/22) | 🐳 Major | r-bt | Adds a new `<custom>` component that supports rendering custom geometry |
-| [#28](https://github.com/tscircuit/jscad-fiber/pull/28) | 🐙 Minor | seveibar | Ignore the `package.json` file in the format check and fix issues with the status checks. |
-| [#24](https://github.com/tscircuit/jscad-fiber/pull/24) | 🐌 Tiny | r-bt | Bump the version number in the `package.json` file to publish a new version on npm. |
+| [#35](https://github.com/tscircuit/easyeda-converter/pull/35) | 🐳 Major | andrii-balitskyi | Make sure the model object URL resolves when generating TypeScript components. |
+| [#33](https://github.com/tscircuit/easyeda-converter/pull/33) | 🐳 Major | andrii-balitskyi | When specifying `-t tsx`, the base component filename is now based on the manufacturer part number instead of the input file name. |
+| [#34](https://github.com/tscircuit/easyeda-converter/pull/34) | 🐙 Minor | andrii-balitskyi | Make `SMT` and `jlcOnSale` properties optional in the `EasyEdaJsonSchema`. |
 
-### [tscircuit/checks](https://github.com/tscircuit/checks)
+### [tscircuit/soup](https://github.com/tscircuit/soup)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#6](https://github.com/tscircuit/checks/pull/6) | 🐳 Major | seveibar | Fix a bug in the `tracesOverlap` function to return the intersection point instead of just a boolean |
-| [#5](https://github.com/tscircuit/checks/pull/5) | 🐳 Major | seveibar | Add a hack that allows missing `start_pcb_port_ids` and `end_pcb_port_ids` to not break overlap testing when a trace only contains two ports. |
-| [#4](https://github.com/tscircuit/checks/pull/4) | 🐳 Major | seveibar | This pull request fixes an issue where the start and end port IDs were not correctly added to the trace, and it adds a regression test case. |
-| [#3](https://github.com/tscircuit/checks/pull/3) | 🐳 Major | seveibar | Implement nonoverlapping checks, add NetManager system for detecting connected traces, and add workflow files for building, formatting, and publishing. |
-| [#8](https://github.com/tscircuit/checks/pull/8) | 🐳 Major | tscircuitbot | Fix for issue #7 by improving the logic for checking if PCB ports are connected. |
+| [#14](https://github.com/tscircuit/soup/pull/14) | 🐳 Major | seveibar | Add "center" to pcb_trace_error and add biome.json |
+| [#13](https://github.com/tscircuit/soup/pull/13) | 🐙 Minor | imrishabh18 | Add a new field `manufacturer_part_number` to the `source_component_base` schema. |
+| [#12](https://github.com/tscircuit/soup/pull/12) | 🐌 Tiny | syedbarimanjan | Fix a typo in the export declaration to match the file name. |
 
-### [tscircuit/soup](https://github.com/tscircuit/soup)
+### [tscircuit/soup-util](https://github.com/tscircuit/soup-util)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#14](https://github.com/tscircuit/soup/pull/14) | 🐙 Minor | seveibar | Add "center" to pcb_trace_error and add biome.json |
-| [#13](https://github.com/tscircuit/soup/pull/13) | 🐙 Minor | imrishabh18 | Add manufacturer part number to source component base |
-| [#12](https://github.com/tscircuit/soup/pull/12) | 🐌 Tiny | syedbarimanjan | The change matches the export declaration to the file name in the `cad/index.ts` file. |
+| [#5](https://github.com/tscircuit/soup-util/pull/5) | 🐳 Major | seveibar | Introduces a feature to get readable names for various elements in a circuit, including PCB traces, ports, and SMT pads. |
 
-### [tscircuit/footprinter](https://github.com/tscircuit/footprinter)
+### [tscircuit/jscad-electronics](https://github.com/tscircuit/jscad-electronics)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#12](https://github.com/tscircuit/footprinter/pull/12) | 🐙 Minor | seveibar | Update the build system to target the "esnext" version of JavaScript and set the module resolution to "Bundler" to avoid issues with the Vite bundler and the lodash library. |
+| [#7](https://github.com/tscircuit/jscad-electronics/pull/7) | 🐳 Major | seveibar | Add Footprint Pads for sizing, add 0603 resistor footprint + 3D model |
+| [#10](https://github.com/tscircuit/jscad-electronics/pull/10) | 🐳 Major | Slaviiiii | Implement a 0402 component with accurate dimensions and terminator pads. |
+| [#9](https://github.com/tscircuit/jscad-electronics/pull/9) | 🐳 Major | Slaviiiii | Add a new 0805 component |
+| [#8](https://github.com/tscircuit/jscad-electronics/pull/8) | 🐳 Major | Slaviiiii | Introduce new components `A0603`, `ExtrudedPads`, `FootprintPad`, and `FootprintPlatedHole`, and update dependencies and configuration. |
 
-### [tscircuit/plop](https://github.com/tscircuit/plop)
+### [tscircuit/jscad-fiber](https://github.com/tscircuit/jscad-fiber)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#2](https://github.com/tscircuit/plop/pull/2) | 🐙 Minor | seveibar | Fix looking for biome dependency inside of dependencies rather than devDependencies |
+| [#34](https://github.com/tscircuit/jscad-fiber/pull/34) | 🐳 Major | seveibar | Introduce `withOffsetProp` and `withColorProp` higher-order components to enable setting `offset` and `color` props on the `<Cuboid>` component. |
+| [#37](https://github.com/tscircuit/jscad-fiber/pull/37) | 🐳 Major | Slaviiiii | Add a new "Rotate" wrapper component to the library |
+| [#29](https://github.com/tscircuit/jscad-fiber/pull/29) | 🐳 Major | Slaviiiii | Implement union and translate wrappers |
+| [#26](https://github.com/tscircuit/jscad-fiber/pull/26) | 🐳 Major | r-bt | Adds a new `JSCadThreeMesh` component that uses the `useJSCADRenderer` hook to render 3D objects from JSCAD code in a React Three Fiber scene. |
+| [#22](https://github.com/tscircuit/jscad-fiber/pull/22) | 🐳 Major | r-bt | Adds a `<custom>` component that supports rendering custom geometry, which is useful for testing and for rendering geometry that cannot be made declaratively. |
+| [#28](https://github.com/tscircuit/jscad-fiber/pull/28) | 🐙 Minor | seveibar | Have format ignore package.json, fix status checks |
+| [#39](https://github.com/tscircuit/jscad-fiber/pull/39) | 🐙 Minor | Slaviiiii | Adds support for both `rotation` and `angles` props in the `Rotate` component, allowing for more flexibility in how rotation is specified. |
+| [#24](https://github.com/tscircuit/jscad-fiber/pull/24) | 🐌 Tiny | r-bt | Update the version in package.json to publish a new version on npm |
 
-### [tscircuit/soup-to-svg](https://github.com/tscircuit/soup-to-svg)
+### [tscircuit/footprinter](https://github.com/tscircuit/footprinter)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#6](https://github.com/tscircuit/soup-to-svg/pull/6) | 🐳 Major | imrishabh18 | Introduced a new function `pcbSoupToSvg` to render a PCB circuit as SVG. |
-| [#5](https://github.com/tscircuit/soup-to-svg/pull/5) | 🐳 Major | imrishabh18 | Storybook added to the project |
-| [#3](https://github.com/tscircuit/soup-to-svg/pull/3) | 🐳 Major | imrishabh18 | The pull request adds a script to generate an SVG output from a Soup data structure. |
-| [#8](https://github.com/tscircuit/soup-to-svg/pull/8) | 🐙 Minor | seveibar | Rename the package from "@tscircuit/soup-to-svg" to "circuit-to-svg" and update the description to "Convert Circuit JSON to SVG". |
-| [#9](https://github.com/tscircuit/soup-to-svg/pull/9) | 🐙 Minor | imrishabh18 | Add a GitHub workflow to publish the project to npm |
+| [#12](https://github.com/tscircuit/footprinter/pull/12) | 🐙 Minor | seveibar | Update the build system to target `esnext` instead of `es2022` and use `moduleResolution: "Bundler"` to avoid the Vite lodash issue. |
 
-### [tscircuit/bunaider](https://github.com/tscircuit/bunaider)
+### [tscircuit/plop](https://github.com/tscircuit/plop)
+
+| PR # | Impact | Contributor | Description |
+|------|--------|-------------|-------------|
+| [#2](https://github.com/tscircuit/plop/pull/2) | 🐙 Minor | seveibar | Fix looking for biome dependency inside of dependencies rather than devDependencies |
+
+### [tscircuit/circuit-to-svg](https://github.com/tscircuit/circuit-to-svg)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#4](https://github.com/tscircuit/bunaider/pull/4) | 🐙 Minor | seveibar | Update the CLI version to match the package.json version |
+| [#9](https://github.com/tscircuit/circuit-to-svg/pull/9) | 🐳 Major | imrishabh18 | Add a GitHub workflow to publish the project to npm |
+| [#6](https://github.com/tscircuit/circuit-to-svg/pull/6) | 🐳 Major | imrishabh18 | Added a new function `pcbSoupToSvg` to render a PCB circuit as an SVG. |
+| [#5](https://github.com/tscircuit/circuit-to-svg/pull/5) | 🐳 Major | imrishabh18 | Storybook added to the project |
+| [#3](https://github.com/tscircuit/circuit-to-svg/pull/3) | 🐳 Major | imrishabh18 | Add a new function to generate SVG from soup data |
+| [#8](https://github.com/tscircuit/circuit-to-svg/pull/8) | 🐙 Minor | seveibar | Rename the package from "@tscircuit/soup-to-svg" to "circuit-to-svg" and update the description to reflect the purpose of converting Circuit JSON to SVG. |
 
 ### [tscircuit/schematic-viewer](https://github.com/tscircuit/schematic-viewer)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#47](https://github.com/tscircuit/schematic-viewer/pull/47) | 🐳 Major | imrishabh18 | Adds the manufacturer part number to the SchematicBug component and displays it as text. |
+| [#47](https://github.com/tscircuit/schematic-viewer/pull/47) | 🐳 Major | imrishabh18 | Adds manufacturer part number feature to the SimpleBug component |
 
 ### [tscircuit/circuit-to-png](https://github.com/tscircuit/circuit-to-png)
 
 | PR # | Impact | Contributor | Description |
 |------|--------|-------------|-------------|
-| [#7](https://github.com/tscircuit/circuit-to-png/pull/7) | 🐳 Major | imrishabh18 | Add a GitHub Actions workflow to publish the project to NPM |
-| [#6](https://github.com/tscircuit/circuit-to-png/pull/6) | 🐳 Major | imrishabh18 | Refactor the circuitToPng function to accept both PCB and schematic circuits |
-| [#4](https://github.com/tscircuit/circuit-to-png/pull/4) | 🐳 Major | imrishabh18 | Adds a new function `soupToPng` that converts a circuit represented as a soup of elements to a PNG image. |
-| [#2](https://github.com/tscircuit/circuit-to-png/pull/2) | 🐳 Major | imrishabh18 | Initializes the repository and sets up the project structure, including the .gitignore file, README, package.json, and TypeScript configuration. |
+| [#7](https://github.com/tscircuit/circuit-to-png/pull/7) | 🐳 Major | imrishabh18 | Add a GitHub Actions workflow to publish the package to npm |
+| [#6](https://github.com/tscircuit/circuit-to-png/pull/6) | 🐳 Major | imrishabh18 | Refactor the `circuitToPng` function to accept a `circuitType` parameter and use the appropriate `pcbSoupToSvg` or `soupToSvg` function to generate the SVG. |
+| [#4](https://github.com/tscircuit/circuit-to-png/pull/4) | 🐳 Major | imrishabh18 | Introduces a new feature to convert a circuit represented as a SOUP (Structured Object Markup) to a PNG image. |
+| [#2](https://github.com/tscircuit/circuit-to-png/pull/2) | 🐳 Major | imrishabh18 | Initialize the repository with a .gitignore file, a README.md file, and a biome.json file for project configuration. |
+| [#10](https://github.com/tscircuit/circuit-to-png/pull/10) | 🐙 Minor | imrishabh18 | Add missing version field in package.json |
+| [#9](https://github.com/tscircuit/circuit-to-png/pull/9) | 🐌 Tiny | imrishabh18 | Update the lock file to the latest version |
+| [#8](https://github.com/tscircuit/circuit-to-png/pull/8) | 🐌 Tiny | imrishabh18 | Update README and package dependencies. |
 
 ## Changes by Contributor
 
+### [tscircuitbot](https://github.com/tscircuitbot)
+
+| PR # | Impact | Description |
+|------|--------|-------------|
+| [#85](https://github.com/tscircuit/builder/pull/85) | 🐳 Major | Adds a `routingDisabled` option to the `GroupBuilder` class, which allows disabling the generation of PCB traces and vias. |
+| [#30](https://github.com/tscircuit/pcb-viewer/pull/30) | 🐳 Major | Add support for displaying error diamonds at error location |
+| [#10](https://github.com/tscircuit/bunaider/pull/10) | 🐳 Major | Fix for issue #7 by creating a pull request and commenting on the original issue. |
+| [#13](https://github.com/tscircuit/props/pull/13) | 🐙 Minor | Add an optional `routingDisabled` property to the `GroupProps` type. |
+| [#8](https://github.com/tscircuit/checks/pull/8) | 🐙 Minor | Fix issue #7 by handling the case where a source trace is found but has no connected source ports. |
+
 ### [andrii-balitskyi](https://github.com/andrii-balitskyi)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#82](https://github.com/tscircuit/builder/pull/82) | 🐳 Major | Set the `y` coordinate of `cad_component` to `180` when it's on the bottom layer. |
-| [#107](https://github.com/tscircuit/cli/pull/107) | 🐳 Major | Add biome and formatbot workflow |
-| [#108](https://github.com/tscircuit/cli/pull/108) | 🐳 Major | Ensure that .npmignore is read when publishing packages to include or exclude files. |
-| [#35](https://github.com/tscircuit/easyeda-converter/pull/35) | 🐳 Major | Ensure that the model object URL resolves when generating TypeScript components. |
-| [#34](https://github.com/tscircuit/easyeda-converter/pull/34) | 🐙 Minor | Make `SMT` and `jlcOnSale` properties optional in `EasyEdaJsonSchema`. |
-| [#33](https://github.com/tscircuit/easyeda-converter/pull/33) | 🐙 Minor | When specifying `-t tsx`, the base component filename is now derived from the manufacturer part number instead of the input file name. |
+| [#82](https://github.com/tscircuit/builder/pull/82) | 🐳 Major | Set the `y` coordinate of the `cad_component` to `180` when it's on the bottom layer. |
+| [#107](https://github.com/tscircuit/cli/pull/107) | 🟣 | Add biome and formatbot workflow |
+| [#108](https://github.com/tscircuit/cli/pull/108) | 🐳 Major | Ensure that the .npmignore file is read when publishing packages. |
+| [#35](https://github.com/tscircuit/easyeda-converter/pull/35) | 🐳 Major | Make sure the model object URL resolves when generating TypeScript components. |
+| [#33](https://github.com/tscircuit/easyeda-converter/pull/33) | 🐳 Major | When specifying `-t tsx`, the base component filename is now based on the manufacturer part number instead of the input file name. |
+| [#34](https://github.com/tscircuit/easyeda-converter/pull/34) | 🐙 Minor | Make `SMT` and `jlcOnSale` properties optional in the `EasyEdaJsonSchema`. |
 
 ### [seveibar](https://github.com/seveibar)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#84](https://github.com/tscircuit/builder/pull/84) | 🐳 Major | Add a GitHub Actions workflow to automatically fix issues labeled as 'aider' |
-| [#80](https://github.com/tscircuit/builder/pull/80) | 🐳 Major | The pull request handles PCB routes when finding the center of bounds, and also handles the case when there are no available points in the bounds. |
-| [#28](https://github.com/tscircuit/pcb-viewer/pull/28) | 🐳 Major | Add a new GitHub workflow to build the project on push and pull request events and fix a build issue in the `edit-events.ts` file. |
-| [#12](https://github.com/tscircuit/props/pull/12) | 🐳 Major | Add a GitHub workflow to automatically fix issues labeled as 'aider' using the bunaider tool. |
-| [#10](https://github.com/tscircuit/props/pull/10) | 🐳 Major | Add a GitHub Actions workflow to automatically format code in pull requests. |
-| [#7](https://github.com/tscircuit/jscad-electronics/pull/7) | 🐳 Major | Add footprint pads for sizing and a 0603 resistor footprint with 3D model |
-| [#34](https://github.com/tscircuit/jscad-fiber/pull/34) | 🐳 Major | Enable `<Cuboid offset={{...}} color="blue" />` by adding `withOffsetProp` and `withColorProp` higher-order components. |
-| [#6](https://github.com/tscircuit/checks/pull/6) | 🐳 Major | Fix a bug in the `tracesOverlap` function to return the intersection point instead of just a boolean |
-| [#5](https://github.com/tscircuit/checks/pull/5) | 🐳 Major | Add a hack that allows missing `start_pcb_port_ids` and `end_pcb_port_ids` to not break overlap testing when a trace only contains two ports. |
-| [#4](https://github.com/tscircuit/checks/pull/4) | 🐳 Major | This pull request fixes an issue where the start and end port IDs were not correctly added to the trace, and it adds a regression test case. |
-| [#3](https://github.com/tscircuit/checks/pull/3) | 🐳 Major | Implement nonoverlapping checks, add NetManager system for detecting connected traces, and add workflow files for building, formatting, and publishing. |
+| [#84](https://github.com/tscircuit/builder/pull/84) | 🐳 Major | Add a GitHub Actions workflow for the "bunaider" tool to automatically fix issues labeled with "aider" |
+| [#80](https://github.com/tscircuit/builder/pull/80) | 🐳 Major | Handle PCB routes when finding the center of bounds, and handle cases where there are no available points in the bounds. |
+| [#28](https://github.com/tscircuit/pcb-viewer/pull/28) | 🐳 Major | Add npm build workflow and fix build error |
+| [#14](https://github.com/tscircuit/soup/pull/14) | 🐳 Major | Add "center" to pcb_trace_error and add biome.json |
+| [#5](https://github.com/tscircuit/soup-util/pull/5) | 🐳 Major | Introduces a feature to get readable names for various elements in a circuit, including PCB traces, ports, and SMT pads. |
+| [#12](https://github.com/tscircuit/props/pull/12) | 🐳 Major | Add a GitHub workflow to automatically fix issues labeled as 'aider' |
+| [#7](https://github.com/tscircuit/jscad-electronics/pull/7) | 🐳 Major | Add Footprint Pads for sizing, add 0603 resistor footprint + 3D model |
+| [#34](https://github.com/tscircuit/jscad-fiber/pull/34) | 🐳 Major | Introduce `withOffsetProp` and `withColorProp` higher-order components to enable setting `offset` and `color` props on the `<Cuboid>` component. |
+| [#6](https://github.com/tscircuit/checks/pull/6) | 🐳 Major | The pull request fixes a bug in the `tracesOverlap` function by returning the intersection point instead of just a boolean value. |
+| [#5](https://github.com/tscircuit/checks/pull/5) | 🐳 Major | Add a hack to allow missing `start_pcb_port_ids` and `end_pcb_port_ids` to not break overlap testing when a trace only contains two ports. |
+| [#4](https://github.com/tscircuit/checks/pull/4) | 🐳 Major | This pull request fixes a bug in the `check-each-pcb-trace-non-overlapping.ts` file by ensuring that the `start_pcb_port_id` and `end_pcb_port_id` properties are correctly added to the `PCBTrace` objects if they are missing. It also adds a regression test case to ensure the fix works as expected. |
+| [#3](https://github.com/tscircuit/checks/pull/3) | 🐳 Major | Implement nonoverlapping checks, add NetManager system for detecting connected traces, and add workflows |
+| [#11](https://github.com/tscircuit/bunaider/pull/11) | 🐳 Major | Fixes scanning of pull request comments using the Octokit library by adding support for fetching review comments and reviews. |
+| [#9](https://github.com/tscircuit/bunaider/pull/9) | 🐳 Major | Allow bunaider to respond to comments on PRs |
 | [#81](https://github.com/tscircuit/builder/pull/81) | 🐙 Minor | Adds a new function `buildPcbTraceElements` to the library for exporting PCB trace elements for benchmarking. |
-| [#79](https://github.com/tscircuit/builder/pull/79) | 🐙 Minor | Adds support for `pcbX` and `pcbY` properties in the `<board />` component, deprecating the use of `center_x`, `center_y`, and `center`. |
-| [#78](https://github.com/tscircuit/builder/pull/78) | 🐙 Minor | Add a development guide for the `@tscircuit/builder` library, including instructions on running tests and making changes. |
-| [#26](https://github.com/tscircuit/pcb-viewer/pull/26) | 🐙 Minor | The pull request fixes a deprecated import of `@tscircuit/builder` and replaces it with `@tscircuit/soup`. |
-| [#14](https://github.com/tscircuit/soup/pull/14) | 🐙 Minor | Add "center" to pcb_trace_error and add biome.json |
-| [#8](https://github.com/tscircuit/props/pull/8) | 🐙 Minor | Make `pinLabels` and `schPortArrangement` optional properties in the component builder. |
-| [#12](https://github.com/tscircuit/footprinter/pull/12) | 🐙 Minor | Update the build system to target the "esnext" version of JavaScript and set the module resolution to "Bundler" to avoid issues with the Vite bundler and the lodash library. |
-| [#28](https://github.com/tscircuit/jscad-fiber/pull/28) | 🐙 Minor | Ignore the `package.json` file in the format check and fix issues with the status checks. |
+| [#79](https://github.com/tscircuit/builder/pull/79) | 🐙 Minor | Adds support for `pcbX` and `pcbY` properties in the `<board />` component, which can be used instead of the deprecated `center_x`, `center_y`, and `center` properties. |
+| [#78](https://github.com/tscircuit/builder/pull/78) | 🐙 Minor | Add a development guide for the `@tscircuit/builder` library, including information on running tests and the process for addressing issues. |
+| [#26](https://github.com/tscircuit/pcb-viewer/pull/26) | 🐙 Minor | Update deprecated builder import to soup |
+| [#10](https://github.com/tscircuit/props/pull/10) | 🐙 Minor | Add a GitHub Actions workflow to automatically format code in pull requests. |
+| [#8](https://github.com/tscircuit/props/pull/8) | 🐙 Minor | Make `pinLabels` and `schPortArrangement` optional in the component props |
+| [#12](https://github.com/tscircuit/footprinter/pull/12) | 🐙 Minor | Update the build system to target `esnext` instead of `es2022` and use `moduleResolution: "Bundler"` to avoid the Vite lodash issue. |
+| [#28](https://github.com/tscircuit/jscad-fiber/pull/28) | 🐙 Minor | Have format ignore package.json, fix status checks |
 | [#2](https://github.com/tscircuit/plop/pull/2) | 🐙 Minor | Fix looking for biome dependency inside of dependencies rather than devDependencies |
-| [#8](https://github.com/tscircuit/soup-to-svg/pull/8) | 🐙 Minor | Rename the package from "@tscircuit/soup-to-svg" to "circuit-to-svg" and update the description to "Convert Circuit JSON to SVG". |
-| [#4](https://github.com/tscircuit/bunaider/pull/4) | 🐙 Minor | Update the CLI version to match the package.json version |
+| [#8](https://github.com/tscircuit/circuit-to-svg/pull/8) | 🐙 Minor | Rename the package from "@tscircuit/soup-to-svg" to "circuit-to-svg" and update the description to reflect the purpose of converting Circuit JSON to SVG. |
+| [#4](https://github.com/tscircuit/bunaider/pull/4) | 🐌 Tiny | Update the version in the CLI program to use the version from the package.json file. |
 
 ### [imrishabh18](https://github.com/imrishabh18)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#47](https://github.com/tscircuit/schematic-viewer/pull/47) | 🐳 Major | Adds the manufacturer part number to the SchematicBug component and displays it as text. |
-| [#6](https://github.com/tscircuit/soup-to-svg/pull/6) | 🐳 Major | Introduced a new function `pcbSoupToSvg` to render a PCB circuit as SVG. |
-| [#5](https://github.com/tscircuit/soup-to-svg/pull/5) | 🐳 Major | Storybook added to the project |
-| [#3](https://github.com/tscircuit/soup-to-svg/pull/3) | 🐳 Major | The pull request adds a script to generate an SVG output from a Soup data structure. |
-| [#7](https://github.com/tscircuit/circuit-to-png/pull/7) | 🐳 Major | Add a GitHub Actions workflow to publish the project to NPM |
-| [#6](https://github.com/tscircuit/circuit-to-png/pull/6) | 🐳 Major | Refactor the circuitToPng function to accept both PCB and schematic circuits |
-| [#4](https://github.com/tscircuit/circuit-to-png/pull/4) | 🐳 Major | Adds a new function `soupToPng` that converts a circuit represented as a soup of elements to a PNG image. |
-| [#2](https://github.com/tscircuit/circuit-to-png/pull/2) | 🐳 Major | Initializes the repository and sets up the project structure, including the .gitignore file, README, package.json, and TypeScript configuration. |
-| [#13](https://github.com/tscircuit/soup/pull/13) | 🐙 Minor | Add manufacturer part number to source component base |
-| [#9](https://github.com/tscircuit/props/pull/9) | 🐙 Minor | Add manufacturer part number to the `bugProps` component in the TypeScript code. |
-| [#9](https://github.com/tscircuit/soup-to-svg/pull/9) | 🐙 Minor | Add a GitHub workflow to publish the project to npm |
-
-### [tscircuitbot](https://github.com/tscircuitbot)
-
-| PR # | Impact | Description |
-|------|--------|-------------|
-| [#30](https://github.com/tscircuit/pcb-viewer/pull/30) | 🐳 Major | Add support for displaying error diamonds at error location |
-| [#8](https://github.com/tscircuit/checks/pull/8) | 🐳 Major | Fix for issue #7 by improving the logic for checking if PCB ports are connected. |
-| [#13](https://github.com/tscircuit/props/pull/13) | 🐙 Minor | Adds a new `routingDisabled` option to the `GroupProps` type. |
+| [#47](https://github.com/tscircuit/schematic-viewer/pull/47) | 🐳 Major | Adds manufacturer part number feature to the SimpleBug component |
+| [#9](https://github.com/tscircuit/circuit-to-svg/pull/9) | 🐳 Major | Add a GitHub workflow to publish the project to npm |
+| [#6](https://github.com/tscircuit/circuit-to-svg/pull/6) | 🐳 Major | Added a new function `pcbSoupToSvg` to render a PCB circuit as an SVG. |
+| [#5](https://github.com/tscircuit/circuit-to-svg/pull/5) | 🐳 Major | Storybook added to the project |
+| [#3](https://github.com/tscircuit/circuit-to-svg/pull/3) | 🐳 Major | Add a new function to generate SVG from soup data |
+| [#7](https://github.com/tscircuit/circuit-to-png/pull/7) | 🐳 Major | Add a GitHub Actions workflow to publish the package to npm |
+| [#6](https://github.com/tscircuit/circuit-to-png/pull/6) | 🐳 Major | Refactor the `circuitToPng` function to accept a `circuitType` parameter and use the appropriate `pcbSoupToSvg` or `soupToSvg` function to generate the SVG. |
+| [#4](https://github.com/tscircuit/circuit-to-png/pull/4) | 🐳 Major | Introduces a new feature to convert a circuit represented as a SOUP (Structured Object Markup) to a PNG image. |
+| [#2](https://github.com/tscircuit/circuit-to-png/pull/2) | 🐳 Major | Initialize the repository with a .gitignore file, a README.md file, and a biome.json file for project configuration. |
+| [#13](https://github.com/tscircuit/soup/pull/13) | 🐙 Minor | Add a new field `manufacturer_part_number` to the `source_component_base` schema. |
+| [#9](https://github.com/tscircuit/props/pull/9) | 🐙 Minor | Add a new manufacturer part number field to the `bugProps` interface. |
+| [#10](https://github.com/tscircuit/circuit-to-png/pull/10) | 🐙 Minor | Add missing version field in package.json |
+| [#9](https://github.com/tscircuit/circuit-to-png/pull/9) | 🐌 Tiny | Update the lock file to the latest version |
+| [#8](https://github.com/tscircuit/circuit-to-png/pull/8) | 🐌 Tiny | Update README and package dependencies. |
 
 ### [DamilolaAlao](https://github.com/DamilolaAlao)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#111](https://github.com/tscircuit/cli/pull/111) | 🐙 Minor | Add a new command "go" to open the TSCircuit Getting Started tutorial in the browser. |
+| [#111](https://github.com/tscircuit/cli/pull/111) | 🐙 Minor | Add a new "go" command to the CLI that opens the TSCircuit Getting Started tutorial in the user's default browser. |
 
 ### [syedbarimanjan](https://github.com/syedbarimanjan)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#12](https://github.com/tscircuit/soup/pull/12) | 🐌 Tiny | The change matches the export declaration to the file name in the `cad/index.ts` file. |
+| [#12](https://github.com/tscircuit/soup/pull/12) | 🐌 Tiny | Fix a typo in the export declaration to match the file name. |
 
 ### [Slaviiiii](https://github.com/Slaviiiii)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#10](https://github.com/tscircuit/jscad-electronics/pull/10) | 🐳 Major | Implement the 0402 component in the jscad-fiber library. |
-| [#8](https://github.com/tscircuit/jscad-electronics/pull/8) | 🐳 Major | Add support for the A0603 resistor footprint and the ExtrudedPads component to render PCB footprints. |
-| [#37](https://github.com/tscircuit/jscad-fiber/pull/37) | 🐳 Major | Add a Rotate component to the library, which allows rotating a geometric object by a specified set of angles. |
+| [#10](https://github.com/tscircuit/jscad-electronics/pull/10) | 🐳 Major | Implement a 0402 component with accurate dimensions and terminator pads. |
+| [#9](https://github.com/tscircuit/jscad-electronics/pull/9) | 🐳 Major | Add a new 0805 component |
+| [#8](https://github.com/tscircuit/jscad-electronics/pull/8) | 🐳 Major | Introduce new components `A0603`, `ExtrudedPads`, `FootprintPad`, and `FootprintPlatedHole`, and update dependencies and configuration. |
+| [#37](https://github.com/tscircuit/jscad-fiber/pull/37) | 🐳 Major | Add a new "Rotate" wrapper component to the library |
 | [#29](https://github.com/tscircuit/jscad-fiber/pull/29) | 🐳 Major | Implement union and translate wrappers |
-| [#9](https://github.com/tscircuit/jscad-electronics/pull/9) | 🐙 Minor | Add a new 0805 component to the project |
+| [#39](https://github.com/tscircuit/jscad-fiber/pull/39) | 🐙 Minor | Adds support for both `rotation` and `angles` props in the `Rotate` component, allowing for more flexibility in how rotation is specified. |
 
 ### [r-bt](https://github.com/r-bt)
 
 | PR # | Impact | Description |
 |------|--------|-------------|
-| [#26](https://github.com/tscircuit/jscad-fiber/pull/26) | 🐳 Major | Adds a new `JSCadThreeMesh` component to render JSCAD geometry using `react-three-fiber`. |
-| [#22](https://github.com/tscircuit/jscad-fiber/pull/22) | 🐳 Major | Adds a new `<custom>` component that supports rendering custom geometry |
-| [#24](https://github.com/tscircuit/jscad-fiber/pull/24) | 🐌 Tiny | Bump the version number in the `package.json` file to publish a new version on npm. |
+| [#26](https://github.com/tscircuit/jscad-fiber/pull/26) | 🐳 Major | Adds a new `JSCadThreeMesh` component that uses the `useJSCADRenderer` hook to render 3D objects from JSCAD code in a React Three Fiber scene. |
+| [#22](https://github.com/tscircuit/jscad-fiber/pull/22) | 🐳 Major | Adds a `<custom>` component that supports rendering custom geometry, which is useful for testing and for rendering geometry that cannot be made declaratively. |
+| [#24](https://github.com/tscircuit/jscad-fiber/pull/24) | 🐌 Tiny | Update the version in package.json to publish a new version on npm |