Nanosat embedded workshop

using Embassy, written in Rust

Getting started

To setup your environment and learn about the exercises follow the book. You can access the book in a few ways:

• On https://aerorust.org/nanosat-workshop/
• Using the Markdown (links pointing to the documentation of items in the project will not work)
• Run the included mdbook (Installation) book:

1. Clone the repo

git clone git@github.com:AeroRust/nanosat-workshop.git && \ 
cd nanosat-workshop

NB: Using git@github.com:AeroRust/nanosat-workshop.git requires SSH key set up on Github.

2. Build the docs of the applications

cargo +nightly website-docs

3. Start the local book server mdbook serve

4. Use your browser to open http://localhost:3000

How to flash

1. Install espflash

cargo install espflash@2.0.0-rc.4

2. Use cargo run

• For power-system application (Olimex board) cargo run -p power-system
• For onboard-computer application (Espressif Rust board) cargo run -p onboard-computer

Pinout and schematics

Olimex's ESP32-C3 dev board:

PDF: https://raw.githubusercontent.com/OLIMEX/ESP32-C3-DevKit-Lipo/main/HARDWARE/ESP32-C3-DevKit-Lipo_Rev_B/ESP32-C3-DevKit-Lipo_Rev_B.pdf

Repository PDF file: https://github.com/OLIMEX/ESP32-C3-DevKit-Lipo/raw/main/HARDWARE/ESP32-C3-DevKit-Lipo_Rev_B/ESP32-C3-DevKit-Lipo_Rev_B.pdf

Espressif's ESP32-C3-DevKit-RUST-1

Pinout, docs, schematics, etc. can be found here: https://github.com/esp-rs/esp-rust-board

Debugging with UART

Using a Usb-to-serial device for UART debugging

Use UART0 at 21 (TX) & 20 (RX) GPIO pins.

Run minicom at correct baud rate (115 200):

minicom -b 115200 --noinit --statline --capturefile=uart_debug.cap --wrap -D /dev/ttyUSB0

This will save all caught data in a file called uart_debug.cap.

License

MIT or APACHE-2.0