EFI-ASRock-Z490-ITX-TB3

• OpenCore v0.7.8
• Big Sur 11.6.3 / Monterey 12.2
• iMac20,1

Hardware

Only the relevant parts:

• Intel i7-10700K 3.8GHz 8-core CPU
• ASRock Z490 Phantom Gaming ITX/TB3 motherboard
• NCASE M1 V6.1 chassis (silver) with two front USB-A ports
• Corsair Vengeance LPX 32GB DDR4 DRAM 3200MHz
• Sapphire Nitro+ RX 5500 XT 8G SE graphics card
• XPG SX8200 Pro NVMe SSDs in 1TB (for macOS) and 512GB (for Windows)

WiFI / Bt

The combo below offers natively supported WiFi 5 / Bluetooth 4.

• 1750Mbps Dual Band WiFi 2.4GHz/5GHz / Bluetooth 4.0 Broadcom BCM94360CD card
• mini PCIe adapter card

Combined with this riser cable, the card/adapter combo from above can be moved outside the motherboard I/O shroud, instead of existing Intel AX200 card.

• Mini PCIe riser with adapter for M.2 Key A/E

This switch is fully compatible with Bluetooth capability in ASRock BIOS thus you can use Bluetooth keyboard for F2, F11 etc.

BIOS

Version 1.40

Usage

1. Update PlatformInfo/Generic stuff with your own, inside config.plist
2. Use your Ethernet’s MAC address for ROM value, as explained in the Dortania guide. Don’t leave it as all 0s.
3. Update value of brcmfx-country argument in NVRAM/7C436110-AB2A-4BBB-A880-FE41995C9F82/boot-args with your country code. Should be identical or compatible with what your WiFi router is broadcasting. (Remove the parameter if you don’t know what I’m talking about here.)
4. Turn off Power Nap in Energy Saver.

Important: Add -v boot-args parameter to get verbose boot process, it greatly simplifies troubleshooting.

What’s working

Pretty much everything.

• NVMe SSD recognised properly.
• Radeon GPU, with properly boosted performance.
• WiFi, Bluetooth
• Ethernet (1 Gbps, when setup in macOS: see ETHERNET note in Papadiche’s guide).
• All media services (Plex, Netflix in Safari, iTunes, Apple TV+ etc). All are fully hardware-accelerated.
• 4K HDMI with HDR, Dolby.
• Watch unlock, Handoff, iMessage, iCloud, Keychain, Xcode etc.
• System Integrity Protection (SIP) fully enabled.
• Sleep / wake
• Thunderbolt 3

What’s not working

• Sidecar

Notes

Use at your own risk.

• All .efi drivers and .kext are -DEBUG builds from the respective packages.
• OpenCanopy (GUI boot menu) is up and running.
• I don’t boot Windows 10 using OC, thus I can’t guarantee it will work. I have Win 10 installed on separate SSD and switch using Boot Menu.

Don’t ask me for help. This stuff is finicky and so infuriatingly detailed that every little mis-step can be a proper headache. This is why Dortania advises to not reuse anyone’s EFI. At least not do it blindly without knowing where to look into.

Ask on reddit and the discord server.

Good luck.

Give back

If you found this code useful, please consider buying me a coffee or two. ☕️😋