tests: Add IPv6 network adv/withdraw case in bgp_evpn_rt5 topotest

Note that withdrawing IPv6 route should not affect IPv4.

Signed-off-by: Xiao Liang <shaw.leon@gmail.com>

tests/topotests/bgp_evpn_rt5/r1/bgpd.conf

@@ -20,7 +20,11 @@ router bgp 65000 vrf r1-vrf-101
  address-family ipv4 unicast
   network 192.168.102.21/32
  exit-address-family
+ address-family ipv6 unicast
+  network fd00::1/128
+ exit-address-family
  address-family l2vpn evpn
   advertise ipv4 unicast
+  advertise ipv6 unicast
  exit-address-family
  !

tests/topotests/bgp_evpn_rt5/r1/zebra.conf

@@ -17,6 +17,7 @@ interface r1-eth0
 !
 interface loop101 vrf r1-vrf-101
  ip address 192.168.102.21/32
+ ipv6 address fd00::1/128
 !
 
 

tests/topotests/bgp_evpn_rt5/r2/bgpd.conf

@@ -21,7 +21,11 @@ router bgp 65000 vrf r2-vrf-101
  address-family ipv4 unicast
   network 192.168.101.41/32
  exit-address-family
+ address-family ipv6 unicast
+  network fd00::2/128
+ exit-address-family
  address-family l2vpn evpn
   advertise ipv4 unicast
+  advertise ipv6 unicast
  exit-address-family
  !

tests/topotests/bgp_evpn_rt5/r2/zebra.conf

@@ -11,6 +11,7 @@ vrf r2-vrf-101
 !
 interface loop101 vrf r2-vrf-101
  ip address 192.168.101.41/32
+ ipv6 address fd00::2/128
 !
 interface r2-eth0
  ip address 192.168.100.41/24

tests/topotests/bgp_evpn_rt5/test_bgp_evpn.py

@@ -25,6 +25,8 @@
 # pylint: disable=C0413
 # Import topogen and topotest helpers
 from lib import topotest
+from lib.bgp import verify_bgp_rib
+from lib.common_config import apply_raw_config
 from lib.topogen import Topogen, TopoRouter, get_topogen
 from lib.topolog import logger
 
@@ -178,20 +180,26 @@ def test_protocols_convergence():
     output = tgen.gears["r1"].vtysh_cmd("show bgp vrf r1-vrf-101 ipv4", isjson=False)
     logger.info("==== result from show bgp vrf r1-vrf-101 ipv4")
     logger.info(output)
+    output = tgen.gears["r1"].vtysh_cmd("show bgp vrf r1-vrf-101 ipv6", isjson=False)
+    logger.info("==== result from show bgp vrf r1-vrf-101 ipv6")
+    logger.info(output)
     output = tgen.gears["r1"].vtysh_cmd("show bgp vrf r1-vrf-101", isjson=False)
     logger.info("==== result from show bgp vrf r1-vrf-101 ")
     logger.info(output)
     output = tgen.gears["r1"].vtysh_cmd("show ip route vrf r1-vrf-101", isjson=False)
     logger.info("==== result from show ip route vrf r1-vrf-101")
     logger.info(output)
+    output = tgen.gears["r1"].vtysh_cmd("show ipv6 route vrf r1-vrf-101", isjson=False)
+    logger.info("==== result from show ipv6 route vrf r1-vrf-101")
+    logger.info(output)
     output = tgen.gears["r1"].vtysh_cmd("show evpn vni detail", isjson=False)
     logger.info("==== result from show evpn vni detail")
     logger.info(output)
     output = tgen.gears["r1"].vtysh_cmd("show evpn next-hops vni all", isjson=False)
     logger.info("==== result from show evpn next-hops vni all")
     logger.info(output)
     output = tgen.gears["r1"].vtysh_cmd("show evpn rmac vni all", isjson=False)
-    logger.info("==== result from show evpn next-hops vni all")
+    logger.info("==== result from show evpn rmac vni all")
     logger.info(output)
     # Check IPv4 and IPv6 connectivity between r1 and r2 ( routing vxlan evpn)
     pingrouter = tgen.gears["r1"]
@@ -208,6 +216,60 @@ def test_protocols_convergence():
     else:
         logger.info("Check Ping IPv4 from R1(r1-vrf-101) to R2(192.168.101.41) OK")
 
+    logger.info("Check Ping IPv6 from  R1(r1-vrf-101) to R2(r2-vrf-101 = fd00::2)")
+    output = pingrouter.run("ip netns exec r1-vrf-101 ping fd00::2 -f -c 1000")
+    logger.info(output)
+    if "1000 packets transmitted, 1000 received" not in output:
+        assert 0, "expected ping IPv6 from R1(r1-vrf-101) to R2(fd00::2) should be ok"
+    else:
+        logger.info("Check Ping IPv6 from R1(r1-vrf-101) to R2(fd00::2) OK")
+
+    config_no_ipv6 = {
+        "r2": {
+            "raw_config": [
+                "router bgp 65000 vrf r2-vrf-101",
+                "address-family ipv6 unicast",
+                "no network fd00::2/128",
+            ]
+        }
+    }
+
+    logger.info("==== Remove IPv6 network on R2")
+    result = apply_raw_config(tgen, config_no_ipv6)
+    assert result is True, "Failed to remove IPv6 network on R2, Error: {} ".format(
+        result
+    )
+    ipv6_routes = {
+        "r1": {
+            "static_routes": [
+                {
+                    "vrf": "r1-vrf-101",
+                    "network": ["fd00::2/128"],
+                },
+            ],
+        },
+    }
+    result = verify_bgp_rib(tgen, "ipv6", "r1", ipv6_routes, expected=False)
+    assert result is not True, "expect IPv6 route fd00::2/128 withdrawn"
+    output = tgen.gears["r1"].vtysh_cmd("show evpn next-hops vni all", isjson=False)
+    logger.info("==== result from show evpn next-hops vni all")
+    logger.info(output)
+    output = tgen.gears["r1"].vtysh_cmd("show evpn rmac vni all", isjson=False)
+    logger.info("==== result from show evpn next-hops vni all")
+    logger.info(output)
+    logger.info(
+        "Check Ping IPv4 from  R1(r1-vrf-101) to R2(r2-vrf-101 = 192.168.101.41)"
+    )
+    output = pingrouter.run("ip netns exec r1-vrf-101 ping 192.168.101.41 -f -c 1000")
+    logger.info(output)
+    if "1000 packets transmitted, 1000 received" not in output:
+        assertmsg = (
+            "expected ping IPv4 from R1(r1-vrf-101) to R2(192.168.101.41) should be ok"
+        )
+        assert 0, assertmsg
+    else:
+        logger.info("Check Ping IPv4 from R1(r1-vrf-101) to R2(192.168.101.41) OK")
+
 
 def test_memory_leak():
     "Run the memory leak test and report results."