cbcopy

cbcopy is an efficient database migration tool designed to transfer data and metadata from Greenplum Database(GPDB) to Cloudberry Database(Cloudberrydb), while also supporting migrations between Greenplum databases and between Cloudberry databases for disaster recovery and database version upgrades.

How does cbcopy work?

Metadata migration

The metadata migration feature of cbcopy is based on gpbackup. Compared to GPDB's built-in pg_dump, cbcopy's main advantage is its ability to retrieve metadata in batches. While pg_dump fetches metadata one row or a few rows at a time, cbcopy retrieves it in batches. This batch processing approach significantly enhances performance, especially when handling large volumes of metadata, making it much faster than pg_dump.

Data migration

Both GPDB and CBDB support starting programs via SQL commands, and cbcopy utilizes this feature. During data migration, it uses SQL commands to start a program on the target database to receive and load data, while simultaneously using SQL commands to start a program on the source database to unload data and send it to the program on the target database.

Pre-Requisites

The project requires the Go Programming language version 1.19 or higher. Follow the directions here for installation, usage and configuration instructions.

Downloading

Clone the repository:

git clone https://github.com/HashDataInc/cbcopy.git

Building and installing binaries

Switch your current working directory to the above cbcopy source directory

Build

make

This will build the cbcopy and cbcopy_helper binaries in the source directory.

Install

make install

This will install the cbcopy and cbcopy_helper programs binaries the $GPHOME/bin directory. Note that GPDB must be sourced for this to work.

Test

Test setup

Some integration tests depend on the dummy_seclabel extension in the Database. Therefore, you need to install the dummy_seclabel extension in the Database first. This extension exists only to support testing of the SECURITY LABEL statement and is not intended for use in production. After successfully installing the dummy_seclabel extension, use the following commands to enable it.

# Configure the shared_preload_libraries parameter to include the dummy_seclabel extension
gpconfig -c shared_preload_libraries -v dummy_seclabel

# Restart the Greenplum database to apply the changes
gpstop -ra

# Verify that the dummy_seclabel extension has been successfully added to shared_preload_libraries
gpconfig -s shared_preload_libraries | grep dummy_seclabel

Running tests

To run all tests except end-to-end (unit, and integration), use:

make test

To run only unit tests, use:

make unit

Running integration tests requires a database instance with the gpcloud extension installed, and the database must be configured with the --with-perl option:

make integration

To run end to end tests (requires a running GPDB instance), use:

make end_to_end

Code Style

We use goimports to maintain consistent code formatting. Before submitting any changes, please run:

make format

This will:

• Format all Go files according to Go standard formatting rules
• Organize imports into groups (standard library, external packages, internal packages)
• Remove any unused imports
• Ensure consistent code style across the project

Migrating Data with cbcopy

Before migrating data, you need to copy cbcopy_helper to the $GPHOME/bin directory on all nodes of both the source and target databases. Then you need to find a host that can connect to both the source database and the target database, and use the cbcopy command on that host to initiate the migration. By default, both metadata and data are migrated.

Database version requirements

cbcopy relies on the "COPY ON SEGMENT" command of the database, so it has specific version requirements for the database.

• GPDB 4.x - A minimum of GPDB version 4.3.17 or higher is required. If your version does not meet this requirement, you can upgrade to GPDB 4.3.17.
• GPDB 5.x - A minimum of GPDB version 5.1.0 or higher is required. If your version does not meet this requirement, you can upgrade to GPDB 5.1.0.
• GPDB 6.x - cbcopy is compatible with all versions of GPDB 6.x.
• GPDB 7.x - cbcopy is compatible with all versions of GPDB 7.x.
• CBDB 1.x - cbcopy is compatible with all versions of CBDB 1.x.

Migration Modes

cbcopy supports seven migration modes.

• --full - Migrate all metadata and data from the source database to the target database.
• --dbname - Migrate a specific database or multiple databases from the source to the target database.
• --schema - Migrate a specific schema or multiple schemas from the source database to the target database.
• --schema-mapping-file - Migrate specific schemas specified in a file from the source database to the target database.
• --include-table - Migrate specific tables or multiple tables from the source database to the target database.
• --include-table-file - Migrate specific tables specified in a file from the source database to the target database.
• --global-metadata-only - Migrate global objects from the source database to the target database.

Data Loading Modes

cbcopy supports two data loading modes.

• --append - Insert the migrated records into the table directly, regardless of the existing records.
• --truncate - First, clear the existing records in the table, and then insert the migrated records into the table.

Object dependencies

If the tables you are migrating depend on certain global objects (such as tablespaces), you have two options:

1. Include the --with-global-metadata option (default: false) during migration, which will automatically create these global objects in the target database.

2. If you choose not to use --with-global-metadata, you must manually create these global objects in the target database before running the migration. For example:

   -- If your tables use custom tablespaces, create them first:
   CREATE TABLESPACE custom_tablespace LOCATION '/path/to/tablespace';

If neither option is taken, the creation of dependent tables in the target database will fail with errors like "tablespace 'custom_tablespace' does not exist".

Role

If you want to change the ownership of the tables during migration without creating identical roles in the target database (by disabling the --with-global-metadata option), you need to:

1. First create the target roles in the target database
2. Use the --owner-mapping-file to specify the mapping between source and target roles

For example, if you have a mapping file with:

source_role1,target_role1
source_role2,target_role2

The migration process will execute statements like:

ALTER TABLE table_name OWNER TO target_role1;

If the target role doesn't exist in the target database, these ownership change statements will fail with an error like "role 'target_role1' does not exist".

Tablespace

cbcopy provides three ways to handle tablespace migration:

1. Default Mode - When no tablespace options are specified, objects will be created in the same tablespace names as they were in the source database. You have two options to ensure the tablespaces exist in the target database:

   • Use --with-global-metadata to automatically create matching tablespaces
   • Manually create the tablespaces in the target database before migration:

     CREATE TABLESPACE custom_space LOCATION '/path/to/tablespace';

2. Single Target Tablespace (--dest-tablespace) - Migrate all source database objects into a single specified tablespace on the target database, regardless of their original tablespace locations. For example:

   cbcopy --dest-tablespace=new_space ...

3. Tablespace Mapping (--tablespace-mapping-file) - Map source tablespaces to different target tablespaces using a mapping file. This is useful when you want to maintain separate tablespaces or map them to different locations. The mapping file format is:

   source_tablespace1,target_tablespace1
   source_tablespace2,target_tablespace2
   

Note:

• For the default mode, either use --with-global-metadata or ensure all required tablespaces exist in the target database before migration
• If you need to migrate objects from different schemas into different tablespaces, you can either:
  1. Use --tablespace-mapping-file to specify all mappings at once
  2. Migrate one schema at a time using --dest-tablespace with different target tablespaces

Parallel Jobs

• --copy-jobs - The maximum number of tables that concurrently copies.

Validate Migration

During migration, we will compare the number of rows returned by COPY TO from the source database (i.e., the number of records coming out of the source database) with the number of rows returned by COPY FROM in the target database (i.e., the number of records loaded in the target database). If the two counts do not match, the migration of that table will fail.

Copy Strategies

cbcopy internally supports three copy strategies for tables.

• Copy On Coordinator - If the table's statistics pg_class->reltuples is less than --on-segment-threshold, cbcopy will enable the Copy On Coordinator strategy for this table, meaning that data migration between the source and target databases can only occur through the coordinator node.
• Copy On Segment - If the table's statistics pg_class->reltuples is greater than --on-segment-threshold, and both the source and target databases have the same version and the same number of nodes, cbcopy will enable the Copy On Segment strategy for this table. This means that data migration between the source and target databases will occur in parallel across all segment nodes without data redistribution.
• Copy on External Table - For tables that do not meet the conditions for the above two strategies, cbcopy will enable the Copy On External Table strategy. This means that data migration between the source and target databases will occur in parallel across all segment nodes with data redistribution.

Log Files and Migration Results

After cbcopy completes its execution, it generates several files in the $USER/gpAdminLogs directory:

1. Log File

   • cbcopy_$timestamp.log - Contains all execution logs, including:
     • Debug messages
     • Error messages
     • Operation details

2. Migration Result Files

   • cbcopy_succeed_$timestamp - Lists all successfully migrated tables
   • cbcopy_failed_$timestamp - Lists all tables that failed to migrate

These files are useful for:

• Monitoring the migration process
• Troubleshooting any issues
• Planning retry attempts for failed migrations

Examples

Basic Migration

# Migrate specific schemas
cbcopy --with-global-metadata --source-host=127.0.0.1 \
    --source-port=45432 --source-user=gpadmin \
    --dest-host=127.0.0.1 --dest-port=55432 \
    --dest-user=cbdb --dbname=testdb \
    --truncate

For more detailed examples, you can refer to our test files:

• end_to_end_suite_test.go
• tablespace_test.go

cbcopy reference

cbcopy utility for migrating data from Greenplum Database (GPDB) to Cloudberry Database (CBDB)

Usage:
  cbcopy [flags]

Flags:
      --append                           Append destination table if it exists
      --compression                      Transfer the compression data, instead of the plain data
      --copy-jobs int                    The maximum number of tables that concurrently copies, valid values are between 1 and 512 (default 4)
      --data-only                        Only copy data, do not copy metadata
      --data-port-range string           The range of listening port number to choose for receiving data on dest cluster (default "1024-65535")
      --dbname strings                   The database(s) to be copied, separated by commas
      --debug                            Print debug log messages
      --dest-dbname strings              The database(s) in destination cluster to copy to, separated by commas
      --dest-host string                 The host of destination cluster (default "127.0.0.1")
      --dest-port int                    The port of destination cluster (default 5432)
      --dest-schema strings              The schema(s) in destination database to copy to, separated by commas
      --dest-table strings               The renamed dest table(s) for include-table, separated by commas
      --dest-table-file string           The renamed dest table(s) for include-table-file, The line format is "dbname.schema.table"
      --dest-tablespace string           Create all database objects in the specified tablespace on destination database
      --dest-user string                 The user of destination cluster (default "gpadmin")
      --exclude-table strings            Copy all tables except the specified table(s), separated by commas
      --exclude-table-file string        Copy all tables except the specified table(s) listed in the file, The line format is "dbname.schema.table"
      --full                             Copy full data cluster
      --global-metadata-only             Only copy global metadata, do not copy data
      --help                             Print help info and exit
      --include-table strings            Copy only the specified table(s), separated by commas, in the format database.schema.table
      --include-table-file string        Copy only the specified table(s) listed in the file, The line format is "dbname.schema.table"
      --metadata-jobs int                The maximum number of metadata restore tasks, valid values are between 1 and 512 (default 2)
      --metadata-only                    Only copy metadata, do not copy data
      --on-segment-threshold int         Copy between Coordinators directly, if the table has smaller or same number of rows (default 1000000)
      --owner-mapping-file string        Object owner mapping file, The line format is "source_role_name,dest_role_name"
      --quiet                            Suppress non-warning, non-error log messages
      --schema strings                   The schema(s) to be copied, separated by commas, in the format database.schema
      --schema-mapping-file string       Schema mapping file, The line format is "source_dbname.source_schema,dest_dbname.dest_schema"
      --source-host string               The host of source cluster (default "127.0.0.1")
      --source-port int                  The port of source cluster (default 5432)
      --source-user string               The user of source cluster (default "gpadmin")
      --tablespace-mapping-file string   Tablespace mapping file, The line format is "source_tablespace_name,dest_tablespace_name"
      --truncate                         Truncate destination table if it exists prior to copying data
      --validate                         Perform data validation when copy is complete (default true)
      --verbose                          Print verbose log messages
      --version                          Print version number and exit
      --with-global-metadata             Copy global metadata objects (default: false)