A node.js package that enables communication with the HaritoraX FBT trackers to read/write data to the trackers. No HaritoraConfigurator software needed (mostly)!
Check out the Haritora-GX(6/2) proof-of-concept repository here: https://github.com/JovannMC/haritora-gx-poc
- A new proof-of-concept repo will be made soon, including all the information I've found about the trackers while developing this package!
npm install haritorax-interpreter
Will write actual documentation at some point, for now refer to the source code, examples, and JSDoc comments. You may also see how it's used in SlimeTora!
For Linux users, you (or your users) need to do some setup depending on the connection mode so the package can communicate with the trackers:
- Run the following commands in your terminal:
sudo usermod -a -G dialout $USERsudo usermod -a -G tty $USERsudo usermod -a -G uucp $USER(for Arch-based distros)
- Restart your computer
See https://github.com/chrvadala/node-ble/tree/main?tab=readme-ov-file#provide-permissions for more info
- Create a new dbus rule (e.g.
/etc/dbus-1/system.d/node-ble.conf) - Insert the following as the contents, changing
%userid%with your user
<!DOCTYPE busconfig PUBLIC "-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>
<policy user="%userid%">
<allow own="org.bluez"/>
<allow send_destination="org.bluez"/>
<allow send_interface="org.bluez.GattCharacteristic1"/>
<allow send_interface="org.bluez.GattDescriptor1"/>
<allow send_interface="org.freedesktop.DBus.ObjectManager"/>
<allow send_interface="org.freedesktop.DBus.Properties"/>
</policy>
</busconfig>
- Restart your computer
| Device | Supported | Elbow/Hip support |
|---|---|---|
| HaritoraX Wireless | Y | Y |
| HaritoraX 1.1B | Y | Y |
| HaritoraX 1.1 | Y | Y |
| HaritoraX 1.0 | Y | Y |
| Haritora | ? | ? |
| Communication mode | Supported |
|---|---|
| Bluetooth (Low Energy) | Y |
| Bluetooth Classic (COM) | Y |
| GX6 Communication Dongle | Y |
| GX2 Communication Dongle | Y |
import { HaritoraX } from "haritorax-interpreter";
// connect to haritorax wireless, enable debug logs, allow printing of processIMUData() logs (lots of spam), print raw unprocessed data (more spam!)
let device = new HaritoraX("wireless", true, true, true);
// start connecting to dongles via GX dongles (COM connection), with the ports COM4, COM5, COM6, and COM7
device.startConnection("com", ["COM4", "COM5", "COM6", "COM7"]);
device.on("imu", (trackerName, rotation, gravity, ankle) => {
// IMU data received, do stuff
});
setTimeout(() => {
// apply the following settings to the rightAnkle tracker:
// sensor mode: 1 (magnetometer enabled)
// posture data transfer rate: 100FPS
// sensor auto correction mode: accelerometer and gyroscope
// ankle motion detection: enabled
device.setTrackerSettings("rightAnkle", 1, 100, ['accel', 'gyro'], true);
}, 2000)
setTimeout(() => {
device.stopConnection("com");
}, 10000)- SlimeTora - A program that connects any of the HaritoraX trackers to the SlimeVR server, supporting Bluetooth (classic), Bluetooth (low energy), and the GX(6/2) communication dongles for all the HaritoraX tracker models!
Let me know if you want to be featured here, if you are using this package in any project!
This package is licensed under the MIT License - see the LICENSE file for details.
- SlimeTora - BracketProto - original inspiration for project, code for turning gravity into acceleration values
- SlimeVR - SlimeVR contributors - the inspiration for SlimeTora, which then inspired this project
- haritorax-slimevr-bridge - sim1222 - math for decoding the IMU packet data
- Shiftall Discord - community - helping with testing the package (via SlimeTora)