Releases: Jyers/Marlin
Releases · Jyers/Marlin
v2.0.1 - Major Fixes
v2.0.0 - A New Horizon
See #1513 for info on why this is a big change
- Repo Now 100% Based on Upstream bugfix-2.0.x
- Updated to Latest Marlin Source
- New Keyboard System
- Added Configurable Host Action Commands
- Fixed Assisted Tramming Center Point
Important: This release may have some major bugs carried over from upstream, nothing should be game-breaking, but be aware of this before you decide to update. For some it may be better to wait for the next release.
v1.3.5.b - Possible Fix for Screen Glitch Issue
This release is intended to test whether the latest screen glitch issue stems from upstream. There are no major fixes or updates in this release besides an updated Marlin source. If you have encountered the issue please try this and see if it solves the problem.
v1.3.5 - New Additions and Important Fixes
- Fix for Z Offset Adjustment with No Probe Configs
- Fixed all Regression from Upstream
- Tuned Temp Watch Settings to Reduce Errors
- Improved Floating Point Number Display
- Fixed Build Version
- Improved Host Prompt Response Handling
- Added Probe Assisted Tramming
- Fixed Issues with Mesh Slot Resetting
v1.3.4 - Important Fixes and Small Additions
- Fixed Powerloss Recovery
- Fixed Pause Print Heater Timeout Issue
- Fixed Preheat Menu for E Move
- Improved Preheat Menu Functionality
- Updated Gotcha Icon Pack
v1.3.3 - Framework Changes and Minor Additions
- Big Framework Change (#807)
- New Preheat Mode Selector
- Added Coordinate Blink if not Homed
- Added Dedicated Homing Menu
- Improved the Beeper Disable Option
- Added Linear Advance Support to Source
- Ensured Homing Before Leveling
- Re-added "Next Point" to Manual Tuning
- Added multiple Mesh Support for UBL
- Added "Purge More" Option to Filament Change
- Improved Menu Error Handling
- Tuned Thermal Protection Values to Reduce Errors
v1.3.2 - Universal Leveling Menu and Minor Fixes
- Dedicated Leveling Menu for all Leveling Configs
- Guided Leveling for Manual UBL
- New Probe Menu with M48 Option
- Updated Thermal Runaway Settings
- Enabled Print Counter
- Added Degree Symbol to Temps
- Beeper Setting Saved to EEPROM
- UI Color Theme Additions
- Added Filament Change Confirm to Tune Menu
- Fixed Percent on SD Print Finish
v1.3.1 - New Settings and Minor Fixes
- Added Custom Color Themes
- Added PID Value Inputs
- Added XY Home Offset Menu
- Added Beeper Disable Option
- Added Live Option to Move Menu
- Enabled Support for EEPROM Editor Plugin
- Fixed Manual Leveling for Larger Beds
- Improved Backlight Off Handling
- Fixed Percent and Time Remaining on Print Finish
- Fixed Minimum Bed Temp Setting
v1.3.0 - New Settings and Major Fixes
- Added LCD Brightness Control
- Added PID Autotune Menu
- Fixed Flowrate Adjustment
- Added Previous Value Option to Manual Mesh
- Fixed Probing Margins for BL Touch
- Enabled Emergency Parser
- Disabled Leveling in Affected Menus
- Added Z Pos Setting to Manual Leveling Menu
- Added ABL Leveling Confirmation
- Fixed Max X Position in Probe Configs
- Added UBL Preheat Before Probing
v1.2.2 - Fixes and Improvements
- Added Support for Displaying Filename During Host Print
- Added Meatpack Gcode Compression Support
- Increased UBL Mesh Inset
- Increased UBL Move Speed
- Fixed Preheat Hotend Menu Issues
- Fixed UBL Microstep Options
- Fixed Serial Connection Issue
- Fixed PID Tuning Popups Freezing
- Require Homing after Disabling Steppers