DH-based Cross-Protocol Attack on TLS

This repository demonstrates a cross-protocol attack on TLS exploiting a Diffie-Hellman (DH) parameter weakness.

Requirements:

OpenSSL 1.1.1 (has been modified to demonstrate this attack efficiently)
GCC compiler
Wireshark for network traffic analysis

OpenSSL modification :
- Server uses fixed private key 
- Client accept 1 as the value of plain DH public key 

How it Works:

This project implements three C programs:

mitm: Acts as a Man-in-the-Middle (MitM) server, intercepting communication between client and server.
tls_server: Simulates a TLS server vulnerable to the DH attack.
tls_client: A TLS client that connects to the server through the MitM.

Running the Demonstration:

Compile the C programs:

Replace /path/to/openssl-source-code with the actual path to your OpenSSL source code directory:
Bash

gcc -o ./mitm mitm.c -I/path/to/openssl-source-code/include  -L/path/to/openssl-source-code/lib -lssl -lcrypto
gcc -o ./tls_server tls_server.c -I/path/to/openssl-source-code/include  -L/path/to/openssl-source-code/lib -lssl -lcrypto
gcc -o ./tls_client tls_client.c -I/path/to/openssl-source-code/include  -L/path/to/openssl-source-code/lib -lssl -lcrypto

Use code with caution.

Run the programs:

Start the MitM server:
Bash

./mitm <host> <port> <server_port>

Use code with caution.

Replace with the desired hostname for the MitM server, with the MitM listening port, and <server_port> with the port the server will communicate with.

Start the server:
Bash

./tls_server <host> <server_port>

Use code with caution.

Replace with the desired hostname for the server and <server_port> with the port the server will listen on (same as specified in the MitM command).

Start the client:
Bash

./tls_client --host <host> --port <mitm_port>

Use code with caution.

Replace with the desired hostname for the server (seen from the client's perspective) and <mitm_port> with the port the MitM server is listening on.

Observe Network Traffic:

Use Wireshark to capture network traffic while running the programs. You should see communication between the client and the server intercepted by the MitM. You may also observe that the client has successfully misinterpreted signed ECDHE parameters from the server as valid plain DHE parameters.

Disclaimer:

This attack is for educational purposes only. This code should not be used for malicious activities.